Determination of Copper,Nickel and Cadmium by Faas After Preconcentration with Zinc-Piperazinedithiocarbamate Loaded on Activated Carbon by Solid-Phase Extraction

ABSTRACT

A method was developed for the preconcentration of copper, nickel and cadmium in water samples, prior to their determination by FAAS, using the Zn-piperazinedithiocarbamate complex (ZnPDC) loaded on activated carbon. In this method, Cu, Ni and Cd in liquid phase quantitatively replaced zinc on a ZnPDC-activated carbon solid phase. Afterwards, the metals on the solid phase were easily eluted by Hg (II) solution into aqueous phase, and were measured by FAAS. The optimum experimental parameters such as pH, sample volume, and effect of matrix ions for the preconcentration of the metals were investigated. The range of linearity 0-6, 0-5, 0-3 μgml^?1, correlation coefficient 0.998, 0.996, 0.999, detection limits 15.7, 23.5, 11.8 ngml^?1 and determination limits 136, 179, 98 ngml^?1 in final Hg(II) solution were obtained for Cu, Ni and Cd, respectively. The proposed method has been employed for the determination of Cu, Ni and Cd in various standard metal alloys and natural water samples.     

螯合树脂在线富集火焰原子吸收法测定痕量铅和镉

在pH=4.88的乙酸-乙酸钠缓冲溶液中,用螯合离子交换树脂富集铅和镉,以1.50mol/L HNO3作洗脱液,火焰原子吸收法测定洗脱液中痕量铅和镉。该方法对铅和镉的线性范围分别是4.0～80.0μg/L和2.0～30.0μg/L,检出限分别为1.3μg/L和0.7μg/L。该方法用于地表水中痕量铅和镉的测定,分析结果满意。     

Online Solid-Phase Extraction of Cd(II), Cu(II), and Co(II) Using Covalently Attached Bis(salicylaldimine) to Silica Gel for Determination in Food and Water by Flame Atomic Absorption Spectrometry

In this study, a novel sorbent material bearing a bis(aldimine) group was designed and successfully synthesized by covalently bonding a 2-[N,N′-bis(salicylaldimine)]aminoethyl amine ligand to the silica gel surface that was characterized by carbon, hydrogen, and nitrogen elemental analysis, thermogravimetric analysis, and the Fourier transform infrared spectroscopy technique. The sorbent was used for the online solid-phase extraction (SPE) of Cd(II), Cu(II), and Co(II) ions for their determination at trace concentration levels by flame atomic absorption spectrometry. The effective factors for the online SPE such as the pH and the flow rate of the sample solution, and type, volume, and flow rate of eluent were investigated. The concentration levels of Cd(II), Cu(II), and Co(II) were measured in certified reference materials including Virginia tobacco leaves (CTA-VTL-2) and water-trace elements (NWTM-15.2) to validate this method. The metal levels in environmental water were determined by this method, and the values were checked by spiking and recovery experiments and independent analysis by inductively coupled plasma-mass spectrometry. The adsorption capacities of the sorbent were found to be 41.2, 31.6, and 25.6?mg/g for Cd(II), Cu(II), and Co(II), respectively. This method was also successfully used for the determination of Cd(II), Cu(II), and Co(II) concentrations in rice and molasses.     

Solid-Phase Extraction with Slurry Injection of the Resin Into ETAAS for Trace Determination of Thallium in Natural Water

Thallium in natural water samples was determined by electrothermal atomic absorption spectrometry after 1000-fold enrichment by mini solid-phase extraction from a 100-mL sample solution. A Tl-pyrrolidine-1-carbodithioate complex formed in a sample solution of pH 1.6 was extracted on fine particles of a cellulose nitrate resin dispersed in the sample solution. The cellulose nitrate resin was then collected on a membrane filter (25mm^ø) by filtration under suction using a glass funnel with an effective filtration area of 0.64cm². As a result, a circular thin layer of the resin phase with a diameter of 9mm was obtained. Then the resin phase was carved out by an acrylate resin puncher with a 10-mm^ø hole to put it into a sample cup containing 100µL of 10mM HNO₃ containing 0.5mM NaCl. The resin phase was suspended in the solution by ultrasonication. 1000-fold enrichment was thus attained within 15min, and the suspension was delivered to electrothermal atomic absorption spectrometry. The linear calibration graph was obtained in the range of 0–4ng of Tl in 100mL of a sample solution. The detection limit obtained by 3 method was 0.19ng. The proposed method was applied to the determination of Tl in natural water samples. The results showed the concentration of Tl in seawater was 12.1±1.8pgmL^–1 for the calibration graph method and 12.6±1.4pgmL^–1 for the standard addition method. A snowmelt sample contained 20.7±1.0pgmL^–1 of Tl.     

Multielement Preconcentration and Removal of Trace Metals by Solid-Phase Extraction

ABSTRACT

The solid phase extraction of trace amounts of some metal ions from their mixtures using cation exchanger Dowex 50Wx4, cellulose sorbent with phosphonic acid groups Cellex P, chelating resin Chelex 100 and SIO₂-TPP sorbent which contains porphyrin ligand covalently attached to aminopropyl silica gel was investigated. With respect to multielement preconcentration Cellex P and Chelex 100 seem to be the best sorbents; the recovery test for Al, Be, Cd, Ni, Pb and Zn were > 90%. Additionally, Cellex P appeared to be suitable for enrichment of Co and Mn. Silica-TPP sorbent could be applied as a selective collector for Mo(VI) and V(IV).     

Column Solid-Phase Extraction with 2-Acetylmercaptophenyldiazoaminoazobenzene (AMPDAA) Impregnated Amberlite XAD-4 and Determination of Trace Heavy Metals in Natural Waters by Flame Atomic Absorption Spectrometry

A column solid-phase extraction (SPE) preconcentration method was developed for the determination of Cd, Co, Cu, Ni and Zn ions in natural water samples by flame atomic absorption spectrometry. The procedure is based on the retention of analytes in the form of 2-acetylmercaptophenyldiazoaminoazobenzene (AMPDAA) complexes on a short column of AMPDAA-XAD-4 resin from buffered sample solution and subsequent elution with hydrochloric acid plus sodium chloride. Important SPE parameters were optimized using model solutions. The loading half-time, t_1/2, for Cd, Co, Cu and Zn was found to be less than 5min, and for Ni the value was 12min. The detection limit for Cd, Co, Cu, Ni and Zn was 0.028, 0.064, 0.042, 0.023 and 0.16µgL^–1, respectively, and the quantification limit was 0.043, 0.11, 0.099, 0.044 and 0.29µgL^–1, respectively. The AMPDAA-XAD-4 resin has good selectivity for Cd, Co, Cu, Ni and Zn over several electrolytes, especially over earth alkaline metals with tolerance limits of 0.05molL^–1. The method was validated by analysing a standard reference material (GBW 08301), and it was found that the results agree with those quoted by the manufactures. The developed method was applied to the determination of trace metal ions in tap water and river water samples with satisfactory results.     

火焰原子吸收分光光度法测大沂河水体的重金属含量

采用火焰原子吸收分光光度法测定了山东省曲阜市大沂河水体的重金属铜、铅、镉、锌含量。结果表明,大沂河水体中铜、铅、镉、锌的最高含量分别为0.018,0.230,0.176,0.490mg/L,其中铅和镉的含量超过国家Ⅴ类水标准。     

Graphene oxide-packed micro-column solid-phase extraction combined with flame atomic absorption spectrometry for determination of lead (II) and nickel (II) in water samples

A sensitive and simple method has been established for simultaneous preconcentration of trace amounts of Pb (II) and Ni (II) ions in water samples prior to their determination by flame atomic absorption spectrometry. This method was based on the using of a micro-column filled with graphene oxide as an adsorbent. The influences of various analytical parameters such as solution pH, adsorbent amount, eluent type and volume, flow rates of sample and eluent, and matrix ions on the recoveries of the metal ions were investigated. Using the optimum conditions, the calibration graphs were linear in the range of 7–260 and 5–85 μg L^?1 with detection limits (3S_b) of 2.1 and 1.4 μg L^?1 for lead and nickel ions, respectively. The relative standard deviation for 10 replicate determinations of 50 μg L^?1 of lead and nickel ions were 4.1% and 3.8%, respectively. The preconcentration factors were 102.5 and 95 for lead and nickel ions, respectively. The adsorption capacity of the adsorbent was also determined. The method was successfully applied to determine the trace amounts of Pb (II) and Ni (II) ions in real water samples. The validation of the method was also performed by the standard reference material.     

Pulverized Banana Peel as an Economical Sorbent for the Preconcentration of Metals

A procedure for the determination of trace levels of Cd, Co, Cr, Fe, Mn, Ni, and Pb by flame atomic absorption spectrometry using a column preconcentration system is described in which the metals were adsorbed on pulverized banana peel, an economically and environmentally acceptable sorbent. In the optimization procedure, five variables (sample pH, mass of biosorbent, type of eluent, sample flow rate, and volume) were optimized and the capacity of the biosorbent was established. Under the optimized conditions, the detection limits of the method were 2.4, 27.0, 49.4, 31.1, 6.7, 29.6, and 46.2 µg L^?1 for Cd, Co, Cr, Fe, Mn, Ni, and Pb, respectively. The precision, expressed as relative standard deviation, was less than 4% based on twelve measurements. The recoveries were 81.1% (Cd), 91.4% (Co), 87.2% (Cr), 90.1% (Fe), 88.0% (Mn), 94.1% (Ni), and 93.2% (Pb) under the optimum conditions (pH; 9, sample flow rate; 3 mL min^?1, mass of biosorbent; 200 mg; eluent; 1 mol L^?1 nitric acid, preconcentration factor; 10). The sorption capacity of pulverized banana peel was 15.12, 28.85, 32.70, 30.44, 30.94, 28.97, and 8.21 µmol per gram of adsorbent for Cd, Co, Cr, Fe, Mn, Ni, and Pb, respectively.     

Flame atomic absorption spectrometric determination of Cu and Ni in tobacco samples after Preconcentration using ammonium pyrrolidine dithiocarbamate modified magnetic nanoparticles

Fe₃O₄ nanoparticles coated with SiO₂ and modified with ammonium pyrrolidine dithiocarbamate as a new adsorbent for the single-step extraction and preconcentration of trace amounts of copper and nickel from tobacco samples were prepared. The particle sizes of nanoparticles were characterised by transmission electron microscope. Several parameters affecting the analytical performance, such as the amount of ammonium pyrrolidine dithiocarbamate, amount of magnetic nanoparticles, pH, contact time, coexisting ions, desorption solution and reuse times of magnetic solid-phase extraction, were discussed and optimised. The analytes desorbed from magnetic nanoparticles were determined by flame atomic absorption spectrometry. Under the optimum conditions, the analytical linear ranges were 0.02–15 mg/L for Cu and 0.02–20 mg/L for Ni (R² > 0.9992). The relative standard deviations (RSDs, n = 5) of 1.8% and 2.1% were obtained for Cu and Ni, respectively. The method detection limits were 0.0028 μg/g for Cu and 0.0037 μg/g for Ni. The proposed method was successfully applied to tobacco sample analysis and got excellent recoveries in the range of 89.6–102.3% and RSDs (n = 5) of 1.2–2.5%. This method is much faster and more effective than traditional methods, and it is promising for the analysis of heavy metals.     

Determination of Cadmium,Copper, Lead,and Zinc in Pilchard Sardines from the Bay of Boumerdés by Atomic Absorption Spectrometry

Fish are an important human food with increasing consumption in recent decades. Diet is the main route of exposure to heavy metals for human health. For this reason, many studies have been performed on the pollution by heavy metals in different species of fish. Our main objective was to evaluate the pollution by trace metals (Zn, Cu, Pb, and Cd) in sardine muscles collected from the bay of Boumerdés (Algeria). Flame atomic absorption spectroscopy (AAS) was used for the quantification of Cu and Zn. The quantification of Cd and Pb was achieved by graphite furnace (GF) AAS. The analysis revealed the presence of metal trace elements in the muscles of species at concentrations below the thresholds established by national and international regulations.     

Magnetic solid-phase extraction to preconcentrate trace amounts of gold (III) using nickel ferrite magnetic nanoparticles

In this research, nickel ferrite (NiFe₂O₄) magnetic nanoparticles were synthesised by a simple method and applied as sorbent for magnetic solid-phase extraction of trace amounts of Au(III) from water samples. Detection in this technique was performed by flame atomic absorption spectrometry. The effects of sample pH, amount of sorbent, extraction time, desorption solvent and its volume on the extraction process were optimised. The effects of interfering ions on the recovery of the analyte were also evaluated in model solutions. The best results were obtained at pH 6.5 with 5 mL of eluent solution (0.1 mol L^?1 sodium thiosulphate) and an extraction time of 30 min. Under optimal conditions, the sorption capacity was 34.6 mg g^?1. Also, enhancement factor (for 100 mL of sample solution) was found to be 19.3. The calibration graph was linear in the range of 4.4–800.0 µg L^?1 gold concentration and the limit of detection was 1.32 µg L^?1. The relative standard deviation of the method (for n = 8) was 1.57%. The method was successfully applied to the extraction of Au(III) from water samples.     

Solid-Phase Extraction of Trace Amounts of Selenomethionine

Abstract

Preconcentration and separation of trace amounts of selenomethionine was investigated using several solid sorbents. The best results were obtained with copper-treated Chelex 100 chelating resin. Selenomethionine from 100 ml of solution adsorbed on 0.2 g of the resin was eluted with 8 ml of 1.5 mol/l ammonia solution and determined by electrothermal atomic absorption spectrometry. The column chromatography with Cu-Chelex and functionalized cellulose sorbent Cellex T was applied to separate organic and inorganic selenium forms.     

Analysis of Tea for Metals by Flame and Graphite Furnace Atomic Absorption Spectrometry with Multivariate Analysis

The concentrations of iron, zinc, manganese, copper, chromium, nickel, lead, arsenic, and cadmium were determined using flame and graphite furnace atomic absorption spectrometry in nine herbal tea samples. Hawthorn, yarrow, elderflower, and bearberry are herbal teas for which the metal content has been rarely determined. The concentration of cadmium in St John’s wort exceeded the maximum permissible limit of 0.3?mg/kg. The metals were also determined in aqueous extracts following 5, 10, and 20?min of boiling and using different preparations, including acidification with lemon juice. The influence of these factors on metal release was demonstrated using multivariate analyses by redundancy analysis and principal component analysis. The metal release was not considerably affected by the boiling time, while the acidity of the medium was generally positively correlated. For the infusions, arsenic was detected only in acidified mint tea. The extraction efficiencies of metals were determined and classified as highly, moderately, and poorly extractable, with chromium showing largest variations.     

流动注射在线液-液萃取火焰原子吸收法测定水中痕量铅

提出了一种流动注射在线液－液萃取火焰原子吸收直接测定水中痕量铅的分析方法。实验以APDC为螯合剂,用MIBK为萃取剂,研究了在线萃取中各种实验参数、酸度条件的影响,考察了共存元素的干扰。方法的RSD（n=12)为2．7％,测定检出限为3．1μg/L,回收率为96％－106％。     

Determination of Copper in Silicates Using Chelating Resin After Decomposition With Teflon Vessel

Abstract

By the combined use of a decomposition vessel, chelating resin, and atomic absorption spectrometry, a simple method for the determination of copper in silicate rocks was devised. A sample was digested overnight at room temperature with small amounts of hydrofluoric acid and aqua regia in the Teflon vessel having a sealing stopper. In the presence of citrate, only the supernatant of the digested sample solution was passed through a small column of the chelating resin, Dowex A-1, at pH 4. After elution with nitric acid, copper was determined by ordinary atomic absorption spectrometry. The recovery, reproducibility, and accuracy of the method were quite satisfactory. The analytical results obtained for the standard rocks agreed well with reported results.     

Selective Solid-Phase Extraction of Trace Copper Ions in Aqueous Solution with a Cu(II)-Imprinted Interpenetrating Polymer Network Gel Prepared by Ionic Imprinted Polymer (IIP) Technique

An Cu(II)-imprinted interpenetrating polymer network (IPN) gel of epoxy-diethylenetriamine and methacrylic acid-acrylamide-N,N′-methylene-bis-(acrylamide) was synthesized by the ionic imprint polymer (IIP) technique. The first polymer network is formed by epoxy gelation with diethylenetriamine. The other is formed by copper methacrylate co- polymerization with acrylamide and cross-linker N,N′-methylene-bis-(acrylamide). The adsorption–desorption characteristics of the IPN gel as a highly selective solid-phase extraction (SPE) and preconcentration adsorbent for Cu²⁺ from aqueous solution were investigated. The experimental results show that trace Cu²⁺ ions can be quantitatively enriched at pH 5 with recovery >95%. The maximum static adsorption capacity of the ion-imprinted functionalized gel adsorbent was 76 mg g⁻¹. Comparing with non-imprinted IPN gel, the imprinted IPN gel has higher adsorption capacity and selectivity for Cu²⁺ by the static adsorption–desorption experiment. Simultaneously, the times of adsorption equilibration and complete desorption were remarkably short. The precision (RSD) for 11 replicate adsorbent extractions of 20 ng mL⁻¹ Cu²⁺ was 3.4%. The established procedure was applied to two real water samples with satisfactory results. The prepared ion-imprinted IPN gel adsorbent was shown to be promising for solid-phase extraction coupled with atomic absorption spectrometry (AAS) for the determination of trace copper in real samples. In addition, the coordination interaction of Cu²⁺ and functional groups of the IPN gel adsorbent was primarily discussed by FT-IR spectra.     

Rapid Determination of Cadmium and Lead in Maca (Lepidium meyenii) by Magnetic Solid-Phase Extraction and Flame Atomic Absorption Spectrometry

Multiwalled carbon nanotubes were modified by Fe₃O₄ nanoparticles with application for the preconcentration of metals. The modified materials were characterized by infrared spectroscopy, transmission electron microscopy, and X-ray diffraction. The Fe₃O₄ nanoparticle modified multiwalled carbon nanotubes were used as sorbents for the extraction of cadmium and lead from maca prior to analysis by flame atomic absorption spectrometry. The amount of nanoparticles, pH, adsorption time, coexisting ions, eluent solution, and reuse of the material were characterized to optimize the recoveries of the analytes. Under the optimum conditions, the calibration curves were linear from 0.05 to 20 milligrams per liter for cadmium and from 0.05 to 25 milligrams per liter for lead. The limits of detection were 0.32 and 0.57 micrograms per liter while the relative standard deviations were 2.1 and 1.9 percent, respectively. The method was employed for the determination of cadmium and lead in maca and recoveries between 94.8 and 105.6 percent were obtained.     

Chemically bonded multiwalled carbon nanotubes as efficient material for solid phase extraction of some metal ions in food samples

Multiwalled carbon nanotubes chemically functionalized with 2-((3-silylpropylimino) methyl) phenol (SPIMP-MWCNT) and successfully applied for the solid phase extraction (SPE) of some metal ions in food samples. The influences of the analytical parameters including pH, amounts of solid phase, eluent conditions (type, volume and concentrations), sample volume and interference of some metal ions on the recoveries of ions Cu²⁺, Pb²⁺, Fe²⁺, Ni²⁺ and Zn²⁺ ion were investigated. The metal ions retained on SPIMP-MWCNT was eluted using 6?mL of 4?mol?L^?1 HNO₃ solution and their content was determined by flame atomic absorption spectrometry (FAAS) with recoveries more than 95% and relative standard deviations (n?=?5) between 2.4–3.4% for both reproducibility and repeatability. The detection limit of this metal ions was between 1.0–2.6?ng?mL^?1 (3S _b , n?=?10) and their preconcentration factor was 100, while their loading capacity was above 32.9?mg?g^?1 of SPIMP-MWCNT. The proposed method was successfully applied for the preconcentration and determination of analytes in different samples.