Soluble, thermally stable poly(ester amide)s derived from terephthalic acid bis(carboxydiphenyl methyl)ester and different diamines

Terephthalic acid bis(carboxydiphenyl methyl)ester (TBE) as a new monomer for the preparation of polyamides was synthesized through the nucleophilic substitution reaction of benzilic acid with terephthaloyl chloride. This diester-diacid (TBE) was characterized using conventional spectroscopic methods. Polycondensation reactions of TBE with different aromatic and semi-aromatic diamines via Yamazaki method resulted different poly(ester amide)s. All the polymers were characterized and their physical and thermal properties were studied.     

Novel pyridine-based ether ester diamine and resulting thermally stable poly (ether ester amide)s

A novel pyridine-based ether ester diamine was prepared in three steps. Reaction of 1,5-dihydroxy naphthalene with 4-nitrobenzoyl chloride afforded 5-hydroxy-1-naphthyl-4-nitrobenzoate (HNNB). Reduction of nitro group resulted in preparation of an amino compound named 5-hydroxyl-1-naphthyl-4-aminobenzoate (HNAB). The diamine was synthesized by nucleophilic substitution reaction of 5-hydroxyl-1-naphthyl-4-aminobenzoate with 2,6-dichloropyridine in the presence of K₂CO₃. The obtained diamine was fully characterized and used to prepare novel thermally stable poly (ether ester amide)s via polycondensation reaction with different aromatic and aliphatic diacid chlorides. All the polymers were characterized and their physical and thermal properties were studied.     

Novel thermally stable poly(sulfone ether ester imide)s

A novel sulfone ether ester diamine was prepared by a three-step method. Reaction of 1,5-dihydroxy naphthalene with 4-nitrobenzoyl chloride afforded 5-hydroxy-1-naphthyl-4-nitrobenzoate. Reduction of nitro group by iron powder and HCl resulted in preparation of 5-hydroxyl-1-naphthyl-4-aminobenzoate. Reaction of this compound (two moles) with bis (4-chlorophenyl) sulfone led to preparation of a novel sulfone ether ester diamine. Three novel aromatic poly(sulfone ether ester imide)s were synthesized by polycondensation reactions of the prepared diamine with aromatic dianhydrides. Conventional methods were used to characterize the structure of the monomer and polymers. Physical properties of the polymers were also studied. The polyimides showed high thermal stability.     

Aromatic poly(sulfone sulfide amide imide)s as new types of soluble thermally stable polymers

A new diamine monomer containing flexible sulfone, sulfide, and amide units was prepared via three steps. Nucleophilic chloro displacement reaction of 4‐aminothiophenol with 4‐nitrobenzoyl chloride in the presence of propylene oxide afforded N‐(4‐mercapto‐phenyl)‐4‐nitrobenzamide and subsequent reduction of the nitro intermediate led to 4‐amino‐N‐(4‐mercapto‐phenyl)benzamide. Two moles of this amino thiophenol compound was reacted with bis‐(4‐chloro phenyl)sulfone to provide a novel diamine monomer. The diamine was reacted with aromatic dianhydrides to form polyimides via a two‐step polycondensation method, formation of poly(amic acid)s, followed by chemical imidization. The resulting polymers were characterized and their physical properties including thermal behavior, thermal stability, solubility and inherent viscosity were studied. Copyright © 2007 John Wiley & Sons, Ltd.     

Novel species of soluble thermally stable poly(keto ether ether amide)s: preparation,characterization, and properties

A new diamine containing one keto and four ether groups was prepared through a three‐step reaction: first, hydroquinone was reacted with 1‐fluoro‐4‐nitrobenzene and 4‐(4‐nitrophenoxy) phenol was obtained. The next step was reduction of nitro group to amino group in which 4‐(4‐aminophenoxy) phenol was prepared. In the final step, the new diamine named as bis(4‐(4‐(4‐aminophenoxy)phenoxy)phenyl) methanone was synthesized through reaction of the later compound with 4,4′‐difluoro benzophenone. All prepared materials were fully characterized by spectroscopic methods and elemental analysis. Novel species of poly(keto ether ether amide)s were synthesized via polymerization reaction of the diamine with different diacid chlorides including terephthaloyl chloride, isophthaloyl chloride, and adipoyl chloride. All polyamides were characterized, and their properties such as thermal behavior, thermal stability, solubility, viscosity, water uptake, and crystallinity were investigated and compared together. The glass transition temperatures of the polymers were about 204–232°C, and their 10% weight losses were in the range of 396–448°C. Polymers showed high thermal stability and enhanced solubility that mainly resulted from incorporation of the diamine structure containing keto, ether, and aromatic units into polyamide backbones. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis and characterization of thermally stable and flame retardant poly (benzoxazine-co-urethane) matrices

Abstract

The flame-retardant behavior of organic polymers is considered as very important criteria to utilize them in the form of coatings, encapsulants, sealants, and matrices for high performance industrial applications. A new type of poly (benzoxazine-co-urethane) (PBZ-co-PU) matrices have been developed using dimethylol benzoxazine monomers (BZM and BZE) and tris(p-isocyanatophenyl)thiophosphate (Desmodur) through A₂?+?B₃ approach followed by thermal curing. The molecular structure of developed PBZ-co-PU was confirmed by FT-IR spectra and their thermal stability and flame retardant behavior were studied by standard methods. Data obtained from TGA and DSC, indicate that the PBZ-co-PU possesses higher Tg, better thermal stability and LOI than those of neat PBZ. Further, it was also observed that among the two matrix systems (PBZ-co-PU-1 and PBZ-co-PU-2) studied, the PBZ-co-PU-1 based system exhibited higher T_g, thermal stability and flame retardant behavior than those of PBZ-co-PU-2.     

Synthesis and Characterization of High Performance Poly(amide-imide)s based on a New Diimide-diacide and Various Diamines

A new diimide-diacid, (4-(4-(2,6-diphenylpyridin-4yl)phenoxy)phenyl)-1,3-bis(trimellitimidobenzene) (PPMIB), was synthesized from the condensation reaction of a new diamine, (4-(4-(2,6-diphenylpyridin-4yl)phenoxy)phenyl)-3,5-diaminobezamide (PPDA), and trimellitic anhydride carboxylic acid (TMAA) in glacial acetic acid. The diimide-diacid (PPMIB) was characterized by FT-IR, ¹H-NMR and elemental analysis. A series of novel aromatic poly(amide-imide)s (PAIs) was synthesized by using direct polycondensation of PPMIB with various diamines in NMP in the presence of triphenylposphite and pyridine as condensing agents. The resulting PAIs were amorphous, readily soluble in many polar aprotic solvents and showed inherent viscosities of 0.35–0.50 dL/g. According to thermal analysis, these polymers exhibited glass transition temperatures (T_gs) in the range of 202–280°C and temperature of 10% weight loss (T₁₀) varied from 400 to 545°C in N₂. These polymers in NMP solution exhibited strong UV-Vis absorption maxima at 320°C nm and their fluorescence emission peaks appeared around 410–565 nm.     

Soluble poly(amide imide)s containing oligoether spacers

A diimide-diacid with oligoether spacer was synthesized from the condensation reaction of trimellitic anhydride with 1,8-diamino-3,6-dioxaoctane. Soluble poly(amide imide)s containing flexible groups were prepared through polycondensation reactions of diimide-diacid with different diamines via direct Yamazaki method. The poly(amide imide)s showed improved solubilty in polar aprotic solvents due to the presence of ether and alkyl flexible groups. According to the differential scanning calorimetry analysis, the glass transition temperatures of the polymers were in the range of 119-157 °C. According to thermogravimetric analysis, the temperatures for 10% weight losses were in the range of 348-387 °C that showed good thermal stabilities for these polymers.     

Soluble and thermally stable polyamides bearing 1,1′-thiobis(2-naphthoxy) groups

A new-type of sulfide containing diacid (1,1′-thiobis(2-naphthoxy acetic acid)) was synthesized from 2-naphthol in three steps. Reaction of 2-naphthol with sulfur dichloride afforded 1,1′-thiobis(2-naphthol) (TBN). 1,1′-Thiobis(2-naphthoxy acetic ester) (TBNAE) was successfully synthesized by refluxing the TBN with methylcholoroacetate in the presence of potassium carbonate. The related diacid was synthesized by basic solution reduction of TBNAE. The obtained diacid was fully characterized and used to prepare novel thermally stable poly(sulfide ether amide)s via polyphosphorylation reaction with different aromatic diamines. The properties of these new polyamides were investigated and compared with similar polyamides. These polyamides showed inherent viscosities in the range of 0.39-0.87 dL g⁻¹ in N,N-dimethylacetamide (DMAc) at 30 °C and at a concentration of 0.5 g dL⁻¹. All the polyamides were readily soluble in a variety of polar solvents such as DMAc and tetrahydrofuran (THF). These polyamides showed glass transition temperature (T_g) between 241-268 °C. Thermogravimetric analysis measurement revealed the decomposition temperature at 10% weight loss (T₁₀) ranging from 441- 479 °C in argon atmosphere.     

A new category of thermally stable poly(ether amide ether imide)s with increased solubility

Two new poly(ether amide ether imide)s (PEAEIs) were prepared from a new diamine (DA) containing ether, aliphatic, amide, naphthyl and pyridine functional groups that resulted flexible and thermally stable ultimate polymers. The DA was synthesized via two steps, starting from nucleophilic substitution reaction of 1,8‐diamino‐3,6‐dioxaoctane with 6‐chloronicotinoyl chloride in the presence of propylene oxide which, afforded dichloro‐diamide (DCDA) compound. In the second step for the preparation of DA, reaction of DCDA compound with 5‐amino‐1‐naphthol in the presence of K₂CO₃ was achieved. The new DA was then polycondensed with 2,2'‐bis‐(3,4‐dicarboxyphenyl) hexafluoropropane dianhydride and pyromellitic dianhydride to produce PEAEIs. The precursor, monomer and obtained polymers were entirely characterized by FT‐IR and ¹H‐NMR spectroscopy and elemental analysis techniques. The physical properties of the polymers including solubility, thermal behavior, thermal stability, inherent viscosity, morphology and mechanical properties were studied. The new PEAEIs exhibited favorable balance of physical and thermal properties, and their solubility was improved without sacrificing their thermal stability. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis and Characterization of Poly（ether amide）s Containing Bisphthalazinone and Ether Linkages

A novel aromatic diacid, 4, 4′-bis[2-(4-carboxyphenyl)phthalazin- 1-one-4-yl]-bisphenyl ether III, containing bisphthalazinone and ether linkages was prepared from nucleophilic substitution of p-chlorobenzonitrile with the bisphenol-like monomer I, followed by alkaline hydrolysis of the intermediate dinitrile II. A series of poly(ether amide)s containing bisphthalazinone and ether linkages derived from diacid III and aromatic diamines were synthesized by one-step solution condensation polymerization using triphenyl phosphite and pyridine as condensing agents. Moreover, the properties of poly(ether amide)s including thermal stability,solubility and crystallinity were also studied.     

Synthesis and characterisation of poly(ester-amide)s from aromatic bisoxazoline precursors

A series of novel aliphatic aromatic poly(ester-amide)s (PEA) have been synthesized by condensation reaction of aromatic bisoxazolines with aliphatic dicarboxylic compounds. These polymers have a number average molecular weight of 20,000-25,000. Depending of the aromatic structure of the bisoxazoline precursor, they are either amorphous or semi-crystalline. A good solubility in aprotic solvents was observed for all PEAs.     

新型氯取代含杂萘联苯结构可溶性聚芳酰胺的合成、表征和性能

以类双酚单体4-(3-氯-4-羟基-苯基)-2H-二氮杂萘-1-酮(DHPZ-OC)和对氯苯腈为原料进行亲核取代反应合成二腈化合物4-[3-氯-4-(4-氰基苯氧基)苯基]-2-(4-氰基苯基)二氮杂萘-1-酮(),然后在碱性(KOH)条件下进行水解制得了一种新型的含氯取代杂萘联苯结构的芳香二酸,4-[3-氯-4-(4-羧基苯氧基)苯基]-2-(4-羧基苯基)二氮杂萘-1-酮().用新二酸与各种芳香二胺进行直接缩合聚合制得了一系列新型氯取代含杂萘联苯结构的聚芳酰胺,特性粘度可达1.23dL/g.用FTIR和¹HNMR研究了新型二酸单体及聚合物的结构.该类聚芳酰胺均可溶解于NMP,DMAc和DMSO等极性有机溶剂中,并且可浇铸成透明韧性膜,其玻璃化转变温度在291～332℃之间,10%的热失重温度在460℃以上.     

Synthesis,characterization, and biodegradation of copolymers of unsaturated and saturated poly(ester amide)s

A new family of biodegradable copolymers of unsaturated poly(ester amide)s (UPEAs) and saturated poly(ester amide)s (SPEAs) based on L ‐phenylalanine, aliphatic dicarboxylic acids, and aliphatic dialcohols was synthesized by solution polycondensation and characterized. These unsaturated/saturated poly(ester amide) copolymers (USPEAs) were obtained in fairly good yields with N,N‐dimethylacetamide as the solvent. The molecular weights (M_n and M_w) of the USPEAs measured by GPC ranged from 15 to 60 kg/mol with a molecular weight distribution of 1.07–1.63. The chemical structures of the USPEAs were confirmed by both IR and NMR spectra. The USPEA copolymers had glass transition temperatures lower than that of pure UPEA but higher than that of pure SPEA. An increase in the unsaturated component in the USPEA copolymers led to an increase in their glass transition temperatures. The solubility of the copolymers was good in N,N‐dimethylacetamide and dimethyl sulfoxide but poor in water, acetone, methanol, and ethyl acetate. The preliminary in vitro biodegradation properties of the USPEA copolymers were investigated in both pure phosphate buffered saline (PBS) buffer and α‐chymotrypsin solutions. The copolymers showed significantly faster weight loss in an enzyme solution than in a pure PBS buffer. Upon the adjustment of the unsaturated‐to‐saturated diester monomer feed ratio, the obtained USPEA copolymers could have controlled chemical and physical properties, such as glass transition temperatures, solubility, and biodegradability, which could easily extend their applications to biomedical and pharmaceutical areas. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1595–1606, 2007     

An efficient halogen-free flame retardant for glass-fibre-reinforced poly(butylene terephthalate)

Compared with poly(butylene terephthalate) (PBT), glass-fibre-reinforced poly(butylene terephthalate) (GF-PBT) is difficult to flame retard with halogen-free flame retardants. In the present study, the aluminium salt of hypophosphorous acid (AP) was used as a flame retardant for GF-PBT. A series of flame-retardant GF-PBT composites was prepared via melt compounding. The flame retardance and combustion behaviour of the composites were studied by limiting oxygen index (LOI), vertical burning test (UL-94) and cone calorimetric test. Thermal behaviours and thermal decomposition kinetics were investigated by thermogravimetric analysis (TGA) under N₂ atmosphere. The addition of AP to the composites could result in an increased LOI value, a UL-94 V-0 (1.6 mm) classification and a better fire performance in cone calorimetric tests. The char morphology observation after flame-retardant tests, calculation of decomposition kinetics, X-ray photoelectron spectroscopy (XPS) and infra-red spectral analysis of the char residue confirmed the condensed-phase flame-retardant mechanism. Furthermore, the mechanical properties of the flame-retardant composites were not deteriorated, retaining an acceptable level.     

Studies on photocrosslinkable-cum-flame retardant poly(benzylidene phosphoramide ester)s

Four series of photocrosslinkable-cum-flame retardant poly(benzylidene phosphoramide ester)s were synthesized from bis(4-hydroxy-3-methyoxybenzylidene) acetone, 2,5-bis(4-hydroxy-3-methoxybenzylidene)cyclopentanone, 2,6-bis(4-hydroxy-3- methoxybenzylidene)cyclohexanone and 2,7-bis(4-hydroxy-3-methoxybenzylidene) cycloheptanone with various arylphosphorodichloridates by interfacial polycondensation using a phase transfer catalyst. The resultant polymers were characterized by gpc, FTIR, ¹H, ¹³C and ³¹P-NMR spectroscopy. Thermal behavior of the polymers was evaluated by differential scanning calorimetry and thermogravimetry. Flame retardant properties were ascertained by Limiting Oxygen Index. The photocrosslinking ability of the polymers was studied by ultraviolet spectroscopy. The crosslinking proceeds via 2π + 2π cycloaddition reaction of the benzylidene groups. The rate of crosslinking decreases with increase in the size of cycloalkanone ring, while the thermal stability increases with increase in the size of the alkanone ring. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3285–3291, 1999     

可溶性氯代杂环聚芳酰胺的合成与性能

杂萘联苯酮;溶解性;耐热性;可溶性氯代杂环聚芳酰胺的合成与性能     

Structure‐controlled synthesis of novel soluble and thermally stable poly (aryl ether nitrile ether ketone ketone)/poly (aryl ether nitrile ether ketone biphenyl ketone) copolymers by electrophilic polycondensation

One new synthesis route was first designed to synthesize the biphenyl acid chloride (BPACl), and then a series of novel poly (aryl ether nitrile ether ketone ketone) (PENEKK)/poly (aryl ether nitrile ether ketone biphenyl ketone) (PENEKBK) copolymers with different controlled structure compositions were synthesized by electrophilic polycondensation and varying the molar ratio of BPACl to terephthaloyl chloride (TPC). The obtained PENEKK/PENEKBK copolymers were characterized by different physical and chemical techniques. The results showed, the copolymers with 10–50% molar contents of biphenyl moities exhibited good thermal properties with glass transition temperatures (T_gs) of 184–196°C, decomposition temperatures (T_ds) of 498–515°C, and good solubility in organic solvents (N‐Methyl‐2‐pyrrolidone (NMP), N,N‐dimethylformamide (DMF), and DMSO), indicating that they would have good potential for solvent processing. The thin films of the polymers had tensile strengths of 93.6–101.5 MPa, Young's moduli of 3.03–3.32 GPa, elongations at break of 9–14%, indicating they were strong materials. The densities of the obtained polymers were 1.31–1.40 g/cm^?3, which were far lower than those of some main inorganic materials (such as Fe, nearly 7.8 g/cm^?3), indicating that they would have possible potential for substituting some inorganic materials used as high temperature materials in some areas due to the merits of lightweight. Thus, the copolymers with 10–50% molar contents of biphenyl moities were promising polymer materials. Copyright © 2010 John Wiley & Sons, Ltd.     

A novel halogen-free flame retardant for glass-fiber-reinforced poly(ethylene terephthalate)

In order to prepare halogen-free flame-retardant glass-fiber-reinforced poly(ethylene terephthalate) (FR-GF-PET), a novel flame retardant containing three flame-retardant elements, P, N and S, was synthesized by melt condensation reaction. Its chemical structure was characterized by FT-IR and ¹H NMR spectra. FR-GF-PET was prepared by melt-mixing the flame retardant with GF-PET. The effects of the flame retardant on the flammability and thermally decomposing behaviors of GF-PET were studied via LOI, UL-94 and TGA tests. The results showed that despite a negative effect on the thermal stability of GF-PET, the incorporation of the flame retardant improved the flame retardancy of GF-PET largely. The LOI values of GF-PET increase linearly with the increase of flame retardant content. The GF-PET passed the V-0 rating in UL-94 tests when 15 wt% of the flame retardant was added to GF-PET. An interesting phenomenon was found, that is, with the increase of flame retardant content, the flame retardancy of the system increased but the char yield decreased, which was explained according to the evidences of XPS tests and the kinetics of thermally decomposing reaction.