Synthesis,liquid crystalline mesophases and morphologies of diblock copolymers composed of a poly(dimethylsiloxane) block and a nematic liquid crystalline block

In this study, a series of liquid crystalline diblock copolymers, composed of a soft poly(dimethylsiloxane) (PDMS) block with a de?ned length and a side-on liquid crystalline poly(3??-acryloyloxypropyl 2,5-di(4?-butyloxybenzoyloxy) benzoate) (P3ADBB) block with different lengths, are synthesised by the atom transfer radical polymerisation. The macromolecular structures, liquid crystalline properties and the microphase-separated morphologies of the diblock copolymer are investigated by ¹H NMR, FT-IR, GPC, POM, DSC and TEM. The results show that the well-de?ned diblock copolymers (PDMS_n-b-P3ADBB_m) possess four different soft/rigid ratios (n = 58, m = 10, 25, 42, 66) and relatively narrow molecular distributions (PDI ≤ 1.30). P3ADBB blocks of the copolymers show nematic sub-phases, which are identical to the mesomorphic behaviour of the homopolymer P3ADBB. After being annealed at 90°C in a vacuum oven for 48 h, the copolymers form a lamellar morphology when m = 10 and morphologies of PDMS spheres embedded in P3ADBB matrix when m = 25, 42 and 66.     

Co-hydrolysis products of tetraethoxysilane and methyltriethoxysilane in the presence of tetramethylammonium ions: Part 2 [1]

²⁹Si NMR peaks due to species with the double four-membered ring siloxane backbone composed of both Si(O^–)_4/2 and CH₃Si(O^–)_3/2 units, (CH₃) _n Si₈O _{20 – n} ^{/(8 – n) –} (n=1–3), formed by co-hydrolysis of tetraethoxysilane and methyltriethoxysilane in the presence of tetramethylammonium ions in methanol have been assigned. It has been found that ²⁹Si NMR peaks due to Si(OSi)₃(O^–) units shift to lower frequencies by replacement of the adjacent Si(O^–)_4/2 units by CH₃Si(O^–)_3/2 units, in other words, with increasing m value in Si[OSi(O^–)₃]_{3 – m} [OSi(CH₃) (O^–)₂] _m (O^–) (m=0–2). Peaks from CH₃ Si(OSi)₃ units in the species have also appeared as separated due to the kind of neighbor structural units. On the basis of the assignments, positions of CH₃Si(O^–)_3/2 units in the cubic octameric siloxane framework of (CH₃) _n Si₈O _{20 – n} ^{/(8 – n) –} (n=2, 3), for both of which three isomers are present, have been estimated.     

Adsorption and thermodynamic properties of dissymmetric gemini imidazolium surfactants with different spacer length

A series of dissymmetric gemini imidazolium surfactants with different spacer length ([C_mC_sC_nim]Br₂, m + n = 24, m = 12, 14, 16, 18; s = 2, 4, 6) were synthesized and characterized by ¹H NMR and ESI-MS spectroscopy. Their adsorption and thermodynamic properties were investigated by the surface tension and electrical conductivity methods. Consequently, the surface activity parameters (cmc, γ_cmc, π_cmc, pC₂₀, cmc/C₂₀, Γ_max, A_min) and thermodynamic parameters (ΔG_m^θ, ΔH_m^θ, ΔS_m^θ) were obtained. The effects of the dissymmetry (m/n) and the spacer length (s) on the surface activity and micellization process of surfactants have been discussed in detail.     

Synthesis,X-ray structural and DFT studies of n-membered ring P,C-chelated complexes of Pd(II) and Pt(II) derived from unsymmetrical phosphorus ylides and application of Pd(II) complexes as catalyst in Suzuki reaction

The phosphonium salts [Ph₂P(CH₂)_nPPh₂CH₂C(O)C₆H₄-m-OMe]Br (n = 1 (S₁) and n = 2 (S₂)) were synthesized in the reaction of bis(diphenylphosphino)methane (dppm) and bis(diphenylphosphino)ethane (dppe) with 2-bromo-3?-methoxy acetophenone, respectively. Further treatment with NEt₃ gave the phosphorus ylides Ph₂P(CH₂)_nPPh₂C(H)C(O)C₆H₄-m-OMe (n = 1 (Y₁) and n = 2 (Y₂)). These ligands were treated with [MCl₂(cod)] (M = Pd or Pt; cod = 1,5-cyclooctadiene) to give the P, C-chelated complexes, [MCl₂(Ph₂P(CH₂)_nPPh₂C(H)C(O)C₆H₄-m-OMe)] (n = 1, M = Pd (3), Pt (4), and n = 2, M = Pd (5), Pt (6)). These compounds were characterized by elemental analysis, spectroscopic methods, UV–visible, and fluorescence emission spectra. Further, the structures of complexes 3 and 6 were characterized crystallographically. The palladium complexes 3 and 5 proved to be excellent catalysts for the Suzuki reactions of various aryl chlorides. Also, a theoretical study on the structure of complexes 3–6 has been investigated at the BP86/def2-SVP level of theory. The strength and nature of donor?acceptor bonds between the phosphorus ylides (L) and MCl₂ fragment in the [LMCl₂] (M = Pd, Pt, L = Y₁, Y₂) were studied by NBO and energy decomposition analysis (EDA), as well as their natural orbitals for chemical valence variation (EDA-NOCV).     

Reconstructive and displacive transformations of tectosilicates

By using the thermally induced phase transformation initial zeolites were converted into pure carnegieite, stuffed derivative of cristobalite. The polymorphs obtained from Na-LTA are stoichiometric (NaAlSiO₄), since those obtained from Na-FAU zeolite are non-stoichiometric (Na_1-xAl_1-xSi_1+xO₄). Stoichiometric carnegieite have cubic structure, while non-stoichiometric carnegieite crystallized in cubic and orthorhombic forms. ²⁹Si MAS NMR spectra show a very large but expecting difference between stoichiometric and non-stoichiometric carnegieite. The spectrum of stoichiometric carnegieite has only one peak Si(4Al), while the spectrum of non-stoichiometric carnegieite consist few superimposed peaks assigned to Si(4Al), Si(3Al), Si(2Al), Si(1Al) and Si(0Al). DTA study indicates the occurrence of displacive phase transition of all synthesized carnegieite. The transition temperature is depending on silicon aluminum order: T _m=690°C for stoichiometric, T _m=565 and 660°C for non-stoichiometric, low-temperature and high-temperature carnegieite, respectively. This revised version was published online in July 2006 with corrections to the Cover Date.     

Liquid-crystalline coordination polymers based on tetra(alkoxybenzoato)dirhodium(II) complexes axially linked by tetrazine,phenazine and 4,4′-bipyridine

The reaction of dirhodium tetrakis(3,4,5-trialkoxy)benzoates Rh₂(B3OCn)₄ (n = 10, 14, and 18) with three different dinitrogenated axial ligands (L_ax), namely tetrazine (tz), phenazine (phz), and 4,4′-bipyridine (bpy), gave rise to three homologous series of mesogenic coordination polymers, [Rh₂(B3OCn)₄]L_ax. All of them exhibited thermotropic columnar mesophases that were of the hexagonal type for tz and phz and rectangular for bpy. The lighter n = 10 homologs of the three series are liquid crystals (LC) at room temperature. Their mesomorphic properties have been compared with those of the previously studied L_ax = pyrazine series. Models for the supramolecular organization of the three polymeric series in their Col LC phases are proposed on the basis of their structural parameters, as measured by XRD and SAXS. The differences are interpreted in terms of different coordination features of the axial ligands.     

Pyridine effected tunable luminescence properties of a 1D cadmium(II) polymer with tetranuclear second building units

One novel 1D polymer, [Cd₂(m-BrPhHIDC)₂(4,4′-bipy)(H₂O)₂]_n (1) (m-BrPhH₃IDC = 2-(3-bromophenyl)-1H-imidazole-4,5-dicarboxylic acid; 4,4′-bipy = 4,4′-bipyridine), has been hydrothermally synthesised and characterised by single-crystal X-ray diffraction, elemental analysis, IR, powder X-ray diffraction (PXRD) and thermogravimetric analysis. Polymer 1 composed of tetranuclear square [Cd₂(m-BrPhHIDC)₂] second building units and 4,4′-bipy bridges shows the interesting tunable luminescence properties aroused by pyridine. A luminescence enhance mechanism has been proposed.     

Influence of alkyl tail length on self-organisation of side-chain liquid crystalline polymers with biphenyl hemiphasmidic mesogens

A new and simple series of side-chain liquid crystalline polymethacrylates containing biphenyl hemiphasmidic mesogens based on 4-[(3,4,5-trialkan)-1-carbonylbenzoate]biphenyl (denoted as PT_mBMA, m = 6, 8, 10, 12, 14, 16, 18, m refers to the carbon number of alkoxy tails) groups was designed and successfully synthesised via free radical polymerisation. The phase structures and transitions of the polymers were investigated by the combination of techniques including differential scanning calorimetry, polarizing microscope, one-dimensional/two-dimensional wide-angle X-ray diffraction, and small-angle X-ray scattering. The experimental results revealed that the liquid crystalline phase structures and behaviours of the polymers were found to be strongly dependent on the alkyl tail length (m). When m = 6, the PT_mBMA formed a stable smectic phase above T_g. When m = 8, 10, 12, 14, 16, 18, the sample presented a hexagonal columnar mesophase (Φ_h), suggesting that the alkyl length has played an important role in the phase behaviours of hemiphasmidic side-chain liquid crystalline polymers.     

Clˉ as the halogen bond acceptor: studies on strong halogen bonds

The Clˉ anion as the halogen bond acceptor, the diiodotetrafluoroethane I(CF₂)₂I and its derivatives I(MF₂)_nI (M = C, Si, Ge, Sn) as the halogen bond donor, and the strong halogen bonds could be formed. The halogen bonds between I(MF₂)_nI and Clˉ have been designed and investigated by Moller–Plesset perturbation/aug-cc-pVDZ calculations together with the aug-cc-pVDZ-pp basis set for iodine and stannum. The halogen bonds in the I(MF₂)_nI???Clˉ complexes are strong, which are apparently related to the group IV elements, becoming stronger along the sequence of M = Si, C, Ge, Sn. Accompanied with increasing number (n) of MF₂ unit, the halogen bonds (M = Si, Ge, Sn) also become stronger. The energy decomposition analyses reveal that the exchange energy contributes most in forming these halogen-bonded interactions. In the meantime, the electrostatic energy is also a significant factor for the I???Clˉ interactions. The halogen bonds of I(MF₂)nI???Clˉ(M = C, Ge, Sn) belong to partial-covalent interactions, while they are noncovalent interactions when M = Si.     

Effect of the lanthanoid-size on the structure of a series of lanthanoid-anilato 2-D lattices*

Abstract

We report the synthesis and characterization of a series of Ln-based bromoanilato 2-D lattices with dimethyl sulfoxide (DMSO): [Ln₂(C₆O₄Br₂)₃(DMSO)_n]·2DMSO·mH₂O with n = 6 and m = 0 for Ln = La (1), Ce (2), Pr (3), Nd (4), Sm (5), Eu (6) and Gd (7); n = 4 and m = 2 for Ln = Tb (8), Dy (9), Ho (10), Er (11), Tm (12) and Yb (13) (C₆O₄Br₂^2? = 3,6-dibromo-2,5-dihydroxy-1,4-benzoquinone = bromoanilato). The X-ray analysis shows that the largest Ln(III) ions (La-Gd, 1-7) crystallize in the monoclinic P21/n space group (phase I), whereas the smaller Ln(III) ions (Tb–Yb, 8–13) crystallize in the triclinic P-1 space group (phase II). Both phases present a (6,3)-2-D topology but show important differences derived from the different coordination number of the Ln(III) in both phases. In phase I, the Ln(III) ions are nine-coordinate with a tri-capped trigonal prism geometry and rectangular cavities with no solvent molecules. In phase II, the Ln(III) ions are eight-coordinate with a triangular dodecahedral geometry and distorted hexagonal cavities having two water molecules. These differences are due to the lanthanoid contraction. The magnetic properties show that the Ln(III) ions are isolated and do not present any noticeable magnetic interactions as expected for bromoanilato bridges and Ln(III) ions.     

Synthesis and characterisation of Co(II), Ni(II), Zn(II) and Cd(II) complexes with 5-bromo-N,N′-bis-(salicylidene)-o-tolidine

New complexes of type [M(HL)(CH₃COO)(OH₂)_m]·nH₂O (where M:Co, m = 2, n = 2; M:Ni, m = 2, n = 1.5; M:Zn, m = 0, n = 2.5 and M:Cd, m = 0, n = 0; H₂L:5-bromo-N,N′-bis-(salicylidene)-o-tolidine) have been synthesized and characterized by microanalytical, IR, UV–Vis-NIR and magnetic data. Electronic spectra of Co(II) and Ni(II) complexes are characteristic for an octahedral stereochemistry. The IR spectra indicate a chelate coordination mode for mono-deprotonated Schiff base and a bidentate one for acetate ion. The thermal transformations are complex according to TG and DTA curves including dehydration, acetate decomposition and oxidative degradation of the Schiff base. The final product of decomposition is the most stable metallic oxide.     

Water sorption heats on silica-alumina-based composites for interseasonal heat storage

CaCl₂-containing composites have been prepared by depositing the hydrated salt (by incipient wetness impregnation) on three different silica-aluminas with various Si/Al ratios. The surface area and porosity of all the samples were determined by N₂-adsorption at ?196 °C, and their water sorption properties were investigated by thermogravimetry linked to differential scanning calorimetry (TG–DSC) in order to determine the quantity of adsorbed/desorbed water and the related heats. The heat released and the quantity of adsorbed water were found to depend on parameters such as the silica-alumina pore diameters, the Si/Al ratio, and the presence of accessible CaCl₂ active phase. The short-term stability of both supports and composites has been also checked by performing successive hydration–dehydration cycles. The sample with the lower Si/Al ratio provided the highest heat per surface area of material, and the heat released per mol of water increased with the amount of Al₂O₃ present in the samples. The deposition of CaCl₂ positively acted on the quantity of heat released during the water sorption, and the composite with the higher alumina content (75 mass% Al) showed the largest heat released per m² of material (2.4 J m^?2) compared to those containing 25 and 13 mass% Al (1.4 and 1.2 J m^?2, respectively).     

Understanding the role of flexible 4′-functionalized polyethylene glycoxy chains on the behavior of platinum(II) (4′-(ethylene glycoxy)-2,2′:6′,2′′-terpyridine: a kinetic and a mechanistic study

The ligand substitution kinetics of 4′-functionalized mononuclear Pt(II) (4′-(ethylene glycoxy)-2,2′:6′,2′′-terpyridine complexes, [Pt(nY-tpy)Cl)Cl] (where Y = ethylene glycoxy, n = number of ethylene, glycoxy units = 1, 2, 3, and 4, and tpy = 2,2′:6′,2′′-terpyridine), with thiourea, 1,3-dimethyl-2-thiourea, 1,1,3,3-tetramethyl-2-thiourea, and iodide were investigated under pseudo-first-order conditions as a function of concentration and temperature by conventional stopped-flow technique. The observed first-order rate constants followed the simple rate law k_obs = k₂[Nu]. The data obtained show that the ethylene glycoxy pendant, trans to the leaving group, acts as a σ-donor into the terpyridine ligand and is effective only up to n = 1, beyond which the substitution reactivity of the complexes are controlled by the steric influence of the appended ethylene glycoxy pendant units, which decreases with increase in the number of ethylene glycoxy units. The activation parameters obtained support an associative mechanism, where bond formation in the transition state is favored. The observed reactivity trends were supported by density functional theory calculations.     

Asymmetry in liquid crystalline hexaalkoxytriphenylene discotics

The synthesis and phase behaviour of a new series of unsymmetrically substituted hexaalkoxytriphenylene‐based liquid crystals are reported. One of the hexyloxy chains in hexahexyloxytriphenylene (HAT6) is replaced by either a shorter or a longer chain, HAT‐(OC₆H₁₃)₅(OC _n H_2n+1). Compounds with chain lengths n of 2–14, 16 and 18 were prepared and investigated. Compounds with n?13 were not liquid crystalline. For all compounds with n?12 Col_h textures were observed by polarizing microscopy. X‐ray investigations showed that the intercolumnar distance gradually increased with n from n = 2 to n = 12, while the interdisk distance (3.6 Å) remained constant. A small odd–even effect on the increase of the intercolumn distance with n was observed. This effect was also found in the change of ΔH of isotropization with n.     

Heterocyclic pyridine-based liquid crystals: synthesis and mesomorphic properties

A series of new calamitic liquid crystals, 4-{[(pyridin-4-yl)methylidene]amino}phenyl 4-alkoxybenzoates comprising a heterocyclic (pyridine) and two phenyl rings core system, terminal alkoxy chain, imine and ester linkers were synthesised and characterised. This series consists of nine members wherein the members differ by the length of alkoxy chain (C_nH_2n+1O–, where n = 2, 4, 6, 8, 10, 12, 14, 16, 18). Spectral analysis results were in accordance with the expected structure. Their thermotropic behaviours were studied by using differential scanning calorimetry, optical polarising microscopy and powder X-ray diffraction techniques. A single mesophase (nematic) was observed for the first three members of the series (n = 2, 4 and 6). As the alkoxy chain increased to n = 8 and n = 10, the nematic phase appeared together with an additional smectic A (SmA) phase. When moving from n = 12 until the highest members (n = 18), the nematic phase disappeared and these compounds only exhibited a single mesophase (SmA).     

A blue luminescent binuclear cadmium-orotate coordination polymer: synthesis,crystal structure,and thermogravimetric analysis

Assembly of orotic acid (H₃Or, 1,2,3,6-tetrahydro-2,6-dioxo-4-pyrimidinecarboxylic) and Cd(NO₃)·6H₂O yielded a coordination polymer, [(Cd(Hor)·2.5H₂O)₂]_n (1), which has been characterized by X-ray single-crystal diffraction, TGA, and ?uorescence spectra. Single-crystal X-ray structural analyses reveal that 1 is a hydrogen-bonded binuclear Cd-orotate coordination polymer in which both Cd²⁺ ions have different coordination environments with identical distorted octahedral geometry. Crystal data for 1: monoclinic, space group P2₁/n, a = 7.0209(10) Å, b = 13.974(2) Å, c = 17.541(3) Å, β = 98.842(2)°, V = 1700.5(4) Å, Z = 4, R1 = 0.0269, wR2 = 0.0612, θ_max = 25.960. The emission spectrum of the Cd-complex recorded with 265 nm excitation wavelength reveals the complex has strong blue luminescence with the peak maximum 420 nm (2.95 eV) as a result of the n–π* and π–π* transitions on the H₃Or ligand.     

Generation and capture of alkylchlorosilanones

Alkyltrichlorosilanes react with DMSO (molar ratio 1 : 1 0 °C) to give cyclic oligoalkylchlorosiloxanes of the general formula [R(Cl)SiO] _n (where R=Me or Et;n=3–6). With an excess of alkyltrichlorosilane (2: 1), linear oligoalkylchlorosiloxanes Cl[R(Cl)SiO] _m SiCl₂R (where R=Me or Et;m=1–5) are also formed. In the presence of hexamethyldisiloxane (molar ratio Cl₃SiR : DMSO: (Me₃Si)₂O=1:1:2, 20 °C), the reaction products are both cyclic and linear oligoalkyl(trimethylsilyloxy)siloxanes [R(Me₃SiO)SiO] _n (n=3–5) and Me₃Si[OSi(OSiMe₃)R] _m OSiMe₃ (m=1–3), respectively. The reaction of DMSO with trichloro(vinyl)silane and hexamethyldisiloxane occurs in a similar manner. A plausible scheme of formation of the final products via intermediate alkylchlorosilanones RClSi=O and alkyl(trimethylsilyloxy)silanones is discussed. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 361–364, February, 2000.     

Studies on the E7 liquid crystal orientations confined to perfluorinated carboxylic acid‐treated cylindrical cavities of Anodisc membranes by FTIR spectroscopy

The orientation of E7 liquid crystal (LC) confined within 200 nm diameter cylindrical cavities of Anodisc membranes are investigated by FTIR dichroism techniques. The cavity walls of the confining pores were chemically modified with different length perfluorinated carboxylic acids (PCAs, C _n F_2n+1COOH, n = 3, 4, 5, 6) at 1, 3 and 5 mM concentrations. From the FTIR spectra of PCA‐treated alumina Anodsic membranes, we found salt formation between the –COOH group of the PCAs and the Anodisc membranes. From the FTIR spectra of LC‐filled Anodisc membranes, we found an abrupt alignment direction change, from parallel to perpendicular, of the LC molecules along the long axis of the cavities between n = 4 and n = 5 for the 1 mM concentration of PCA. However, for the 5 mM concentration of PCA, the parallel‐to‐perpendicular alignment direction of LC molecules changed between n = 3 and n = 4. These LC orientation changes for PCA‐treated Anodisc membranes occurred at shorter length than for hydrocarbon carboxylic acid (HCA, C _n H_2n+1COOH)‐treated Anodisc membranes. This change may be caused by the lower surface energy of the –(CF₂) _n CF₃ chain of PCA than that of the –(CH₂) _n CH₃ chain of HCA.     

Homometallic glycolates containing hydroxyl functionality for anchoring another metal: synthesis and characterization of heterometallic alkoxide–glycolates of Ti and Zr incorporating Al and Nb

Reaction of Ti(OPrⁱ)₄ with 2-methyl-2,4-pentanediol [HOGOH, where G = CMe₂CH₂CH(Me)] in 1?:?3 M ratio under reflux afforded the monomeric [Ti(OGO)(OGOH)₂] (1), which on further reactions with [Al(OPrⁱ)₃] or [Nb(OPrⁱ)₅] in 1?:?1 and 1?:?2 M ratios afforded heterometallic derivatives, [Ti(OGO)₃{M(OPrⁱ)_n?2}] and [Ti(OGO)₃{M(OPrⁱ)_n?1}₂] [where M = Al (n = 3), Nb (n = 5)], respectively. Similar reactions of Zr(OPrⁱ)₄?PrⁱOH with a number of glycols [HOGOH, where G = CH(Me)CH(Me), CMe₂CMe₂, CMe₂CH₂CH(Me)] yielded dimeric [Zr₂(OGO)₂(OGOH)₄]. [Zr₂(OGO)₆{M(OPrⁱ)_n?2}₂] and [Zr₂(OGO)₄(OGOH)₂M(OPrⁱ)_n?2] [M = Al (n = 3), Ti (n = 4), Nb (n = 5)] were prepared by 1?:?2 and 1?:?1 reactions, respectively, of [Zr₂(OGO)₂(OGOH)₄] with Al(OPrⁱ)₃, Ti(OPrⁱ)₄, or Nb(OPrⁱ)₅. Surprisingly, a 1?:?2 reaction of [VO(OPrⁱ)₃] with 2,2-diethyl-1,3-propanediol in benzene followed a different reaction and produced a neutral tetranuclear derivative [V₄(O)₄(μ-OCH₂CEt₂CH₂O)₂(OCH₂CEt₂CH₂O)₄] (18). All of these derivatives were characterized by elemental analysis, molecular weight measurements, FT-IR, and ¹H NMR (and wherever possible, by ²⁷Al or ⁵¹V NMR) spectroscopic studies. The derivatives [Zr₂(OCMe₂CH₂CH(Me)O)₂(OCMe₂CH₂CH(Me)OH)₄] (9 and 18) were additionally characterized by single-crystal X-ray structure analysis.     

介孔硅铝酸盐的合成及其在傅克反应中的催化性能

采用溶胶凝胶法合成了一系列有序性好且酸性较强的介孔硅铝酸盐材料。利用X射线粉末衍射(XRD)、透射电镜(TEM)、27Al核磁共振(27Al NMR)、氨气程序升温脱附(HN3-TPD)及吡啶吸附红外光谱(Py-FT-IR)对制备的介孔硅铝酸盐材料的结构和性能进行表征,并考察了材料在苯甲醚和苯甲醇的傅克烷基化反应中的催化活性。实验结果表明:合成过程中,表面活性剂的用量、硅铝物质的量之比会影响材料结构的有序性,醋酸用量对材料结构有序性影响很小;进一步研究结果表明,nSi/nAl比会影响材料的酸催化活性,当nSi/nAl=10时材料的酸催化活性最高。氨气程序升温脱附和吡啶吸附红外光谱表明nSi/nAl=10的材料含有最多的B酸酸量。