陈化体系组成对Ce0.65Zr0.35O2储氧材料性能的影响

采用共沉淀法制备了Ce_0.65Zr_0.35O₂(CZ)储氧材料, 在传统的水陈化体系中引入了乙醇, 研究了乙醇的加入对CZ储氧材料性能的影响. 对所制备样品进行了傅里叶变换红外(FTIR)光谱、X射线光电子能谱(XPS)、粉末X射线衍射(XRD)、扫描电镜(SEM)、N₂吸附-脱附、储氧量(OSC)和H₂程序升温还原(H₂-TPR)的表征, 并考察了以CZ储氧材料为载体制备的单钯催化剂的三效性能. 结果表明, 乙醇引入陈化体系对样品的结构和性能有显著影响. 以醇水共存体系陈化制备的CZ储氧材料颗粒小、堆积松散、孔径分布宽、孔容大, 具有优异的储氧性能和热稳定性, 经1000 °C焙烧后, 比表面积为29.3 m²·g^-1, 储氧量仍高达520 μmol·g^-1. 以此为载体制备的单钯催化剂, 空燃比操作窗口宽, 对C₃H₈、CO、NO的转化明显优于水陈化体系制备的储氧材料所制备的催化剂.     

制备方法对Co-MOR催化剂CH4选择还原NO性能的影响

采用离子交换法、浸渍法制备一系列的Co-MOR 催化剂, 并将其用于CH₄选择性催化还原 NO_x(CH₄-SCR)反应. 运用X 射线衍射(XRD)、X 射线荧光光谱(XRF)、扫描电子显微镜(SEM)、紫外-拉曼(UVRaman)光谱、X射线光电子能谱(XPS)、NO程序升温脱附(NO-TPD)等手段对催化剂进行了表征. 结果表明, 浸渍法制备的催化剂, Co以Co₃O₄形式存在; 而离子交换法制备的催化剂, Co以离子形式进入丝光沸石(MOR)骨架之中, 在催化剂上形成更多的Co²⁺和[Co-O-Co]²⁺, 形成更均匀NO吸附中心和CH₄-SCR反应活性中心. 催化剂活性评价表明离子交换法制备的催化剂具有更宽的活性温度区间, Co(0.30)-MOR 催化剂在327-450℃温度范围内NO转化率大于50%.     

磁性Co/TiB2室温高效催化氨硼烷产氢及串联降解有机污染物

通过熔盐法制备TiB₂载体,并采用简单的沉淀-沉积法制备了Co/TiB₂磁性可回收纳米催化剂,用于室温催化氨硼烷（NH₃BH₃）溶液产氢及串联降解对硝基苯酚（4-NP）及偶氮染料酸性橙7（AO7）、酸性红1（AR1）和甲基橙（MO）等有机污染物。采用X射线衍射、扫描电子显微镜、透射电子显微镜、X射线光电子能谱、振动样品磁强计等表征方法对催化剂的微观形貌和结构等进行分析。结果表明,Co纳米粒子均匀地分布在TiB₂载体表面,晶粒尺寸约为40 nm,并且被TiB₂载体包覆,具有典型的金属-载体强相互作用。Co/TiB₂表现出优异的室温催化NH₃BH₃溶液产氢活性,产氢速率为565.8 mol_H2·mol_cat^-1·h^-1。在串联降解有机污染物反应中,Co/TiB₂在7 min内催化4-NP氨基化的转化率接近100%,反应速率常数高达0.72 min^-1;降解AO7的反应速率常数在3种偶氮染料中最高（0.34 min^-1）。通过EPR-DMPO（EPR=电子顺磁共振,DMPO=5,5-二甲基-1-吡咯啉-N-氧化物）自由基捕获实验检测出Co/TiB₂+NH₃BH₃催化体系中产生大量的氢自由基（·H）。得益于·H的强还原性,Co/TiB₂+NH₃BH₃催化体系能够将4-NP氨基化为具有更高价值的对氨基苯酚（4-AP）,同时能够还原偶氮染料分子中的显色基团偶氮基（—N=N—）。     

Catalytic methanol decomposition to carbon monoxide and hydrogen over Pd/CeO2-ZrO2-La2O3 with different Ce/Zr molar ratios

The catalytic behaviors of Pd (1.4 wt%) catalysts supported on CeO₂-ZrO₂-La₂O₃ mixed oxides with different Ce/Zr molar ratios were investigated for methanol decomposition. Nitrogen adsorption-desorption (BET), X-ray photoelectron spectroscopy (XPS), H₂ temperature-programmed reduction (H₂-TPR), X-ray diffraction (XRD) and Pd dispersion analysis were used for their characterization. Pd/Ce_0.76Zr_0.18 La_0.06O_1.97 catalyst showed the highest BET surface area, best Pd dispersion capability and strongest metal-support interaction. Moreover, XPS showed that there was lattice defect oxygen or mobile oxygen. According to the result of O 1s measurements the lattice defect oxygen or mobile oxygen helped to maintain Pd in a partly oxidized state and increased the activity for methanol decomposition. The Pd/Ce_0.76Zr_0.18La_0.06O_1.97 catalyst exhibited the best activity. A 100% conversion of methanol was achieved at around 260 °C, which was about 20-40 °C lower than other catalysts     

焙烧温度对MnOx-CeO2-WO3-ZrO2催化剂上NH3选择性还原NO的影响

采用共沉淀法制备了MnO_x-CeO₂-WO₃-ZrO₂催化剂,考察了催化剂焙烧温度对O₂和H₂O存在下NH₃选择性催化还原（NH₃-SCR） NO的影响,并利用低温N₂吸附、X射线衍射（XRD）、透射电镜（TEM）、X射线光电子能谱（XPS）、NH₃程序升温脱附（NH₃-TPD）和CO脉冲反应对催化剂进行了表征. 结果表明在NH₃-SCR反应中,催化剂的低温活性随焙烧温度的提高而降低,这是由于催化剂表面化学吸附氧和酸性位减少引起的;催化剂的高温活性随焙烧温度的提高先增加后减小,这与催化剂表面最易释放氧数量的变化趋势相反. 700 ℃焙烧的催化剂具有良好的低温活性和最宽的反应温度窗口,在空速为90000 h^-1的条件下,该催化剂的起燃温度（50% NO转化率）为189 ℃,且反应温度在218-431 ℃范围内,NO转化率可达到80%-100%.     

Synthesis and characterization of a cationic oxorhenium(V) complex containing the pentadentate N3O2-donor ligand bis ( N -methylsalicylideneiminopropyl)amine

The complex salt [ReO(bsa)]PF₆ (H₂bsa?=?bis(N-methylsalicylideneiminopropyl)amine) was prepared from the reaction of cis-[ReO₂I(PPh₃)₂] with H₂bsa in toluene. The dianionic pentadentate ligand bsa is coordinated to the ReO³⁺ moiety via one secondary amino and two imino nitrogens, and two anionic phenolate oxygens. The complex was characterized by spectroscopy and analytical data, and the structure has been determined by single-crystal X-ray diffraction analysis.     

多孔SiO_2·xH_2O负载RuB纳米粒子催化喹啉加氢反应

通过水解,聚乙烯吡咯烷酮(PVP)保护,NaOH刻蚀等方法制备了多孔及富含表面羟基的SiO2·xH2O负载的RuB催化剂RuB/SiO2·xH2O,并用X射线衍射(XRD)、X射线光电子能谱(XPS)、透射电子显微镜(TEM)、傅里叶变换红外(FT-IR)光谱和BET(Brunauer-Emmett-Teller)等手段对该催化剂进行了表征.结果表明该催化剂具有良好的抗中毒能力,在3.0MPa的H2压力和80℃的温和反应条件下,喹啉的转化率高于95%,生成1,2,3,4-四氢喹啉的选择性高于97%.并系统研究了表面羟基和溶剂对催化剂性能的影响,发现以水为溶剂时,RuB/SiO2·xH2O对喹啉加氢反应展示出较高的活性和对1,2,3,4-四氢喹啉较高的选择性,催化剂能够多次循环使用.这一体系的优异催化性能归属于载体表面羟基和水的协同作用.     

Reactivity investigations of some chosen peroxo-vanadium(V), manganese(III) and chromium(VI) compounds

An interpretative account of the results of reactions in aqueous medium of a highly peroxygenated vanadium(V) complex, K [V(O_{2 3}]·3H₂O, with different organic and inorganic substrates is presented. The reactions were monitored by solution EPR spectroscopy and isolation of products at different stages of the reactions. Redox reactions between diperoxide, K[VO(O₂)₂(H₂O)] and VOSO₄ were conducted. The results of the investigation suggest that secondary oxygen exchange-reaction occurs which not only depends on but also utilises the intermediates in the primary reaction during diperoxovanadate-dependent oxidation of VOSO₄. In an interesting reactiontris(acetylacetonato)-manganese(III), Mn(acac)₃, on being reacted with a hydrogen peroxide adduct, KF·H₂O₂, and bpy and phen afforded crystalline [Mn(acac)₂(bpy)] and [Mn(acac)₂(phen)], respectively. The X-ray structural analysis of [Mn(acac)₂(phen)] showed that the compound crystallised in orthorhombic space groupPbcn. The structure consists of a pseudooctahedral Mn(II) ion being bound to two acac⁻(C₅H₅O ₂ ⁻ ) and a phen ligand with the molecule lying on two-fold axis. Reactivity profiles of two new chromium(VI) reagents viz., pyridinium fluorochromate, C₅H₅NH[CrO₃F] (PFC), and quinolinium fluorochromate C₉H₇NH [CrO₃F] (QFC), have been presented. The compounds are capable of acting as both electron-transfer and oxygen-atom-transfer agents. The X-ray analysis of PFC crystals reveals that the compound crystallises in the orthorhombic space group CmcZ₁. The structure consists of discrete pyridinium cations and CrO₃ F anions with no significant hydrogen bonding. This results in total disorder of the pyridinium cation. The tetrahedral [CrO₃ F]⁻ ion lies on a crystallographic mirror plane.     

Synthesis of N-(4′-Benzo[15-crown-5])thiophenoxyphenylaminoglyoxime and its complexes with some transition metals

4-(Chloroacetyl)diphenyl thioether (1) was synthesized from chloroacetyl chloride and diphenyl thioether in the presence of AlCl₃ as catalyst in a Friedel-Crafts reaction. Subsequently, its keto oxime (2) and glyoxime (3) derivatives were prepared. N-(4′-Benzo[15-crown-5]thiophenoxyphenylaminoglyoxime (H₂L) and its sodium chloride complex (H₂L · NaCl) were prepared from 4-(thiophenoxy)chlorophenylglyoxime (3), 4′-aminobenzo[15-crown-5] and sodium bicarbonate or sodium bicarbonate and sodium chloride. Ni(II), Co(II) and Cu(II) complexes of H₂L and H₂L · NaCl have a metal–ligand ratio of 1:2 and the ligand coordinates through the two N atoms, as do most of the vic-dioximes. The BF₂-capped Ni(II) mononuclear complex of the vic-dioxime was prepared. The macrocyclic ligands and their transition metal complexes were characterized on the basis of FT-IR, ¹H NMR, ¹³C NMR spectroscopy and elemental analyses data.     

表面助剂改性对Cu/ZnO/Al2O3甲醇合成催化剂性能的影响

采用共沉淀-后浸渍方法制备了表面助剂改性的Cu/ZnO/Al₂O₃ (CZA)甲醇合成催化剂, 在固定床反应器上以合成气为原料分别考察了三种助剂(Zr、Ba和Mn)对CZA催化剂性能的影响; 以Zr为助剂时反应温度的影响; 并进行了催化稳定性试验. 利用粉末X射线衍射(XRD)、低温氮气吸脱附(N₂-sorption)、氧化亚氮(N₂O)反应吸附技术、X射线光电子能谱(XPS)、氢气程序升温吸脱附(H₂-TPD)、扫描电子显微镜(SEM)和高分辨透射电子显微镜(HR-TEM)技术对催化剂进行了表征.结果显示: 以Zr或Ba作为助剂能够明显提高CZA催化剂耐热前后的甲醇时空收率(STY); Mn的引入降低了CZA催化剂的耐热前活性; Zr的引入降低了CZA催化剂最高活性温度点, 增强了CZA催化剂的催化稳定性; 还原态CZA催化剂表面Cu⁰和ZnO都能吸附活化氢气, Cu⁰与ZnO的强相互作用有利于提高催化剂的性能, 耐热后催化剂性能的降低归因于Cu晶粒的长大. 在实验和表征结果基础上,提出了CZA催化剂上合成气制甲醇的“双向同步催化反应历程”.     

Fe3O4@SiO2@ADMPT/H6P2W18O62: a novel Wells–Dawson heteropolyacid-based magnetic inorganic–organic nanohybrid material as potent Lewis acid catalyst for the efficient synthesis of 1,4-dihydopyridines

A novel Wells–Dawson heteropolyacid-based magnetic Inorganic–organic nanohybrid, Fe₃O₄@SiO₂@ADMPT/H₆P₂W₁₈O₆₂, was fabricated and used as a green, efficient, eco-friendly, and highly recyclable catalyst for the one-pot and multi-component synthesis of 1,4-Dihydopyridine (1,4-DHP) derivatives from the reaction of various aromatic aldehydes with ethyl acetoacetate and ammonium acetate with good to excellent yields and in a short span of time. The nanohybrid catalyst was prepared by the chemical anchoring of Wells–Dawson heteropolyacid H₆P₂W₁₈O₆₂ onto the surface of functionalized Fe₃O₄ nanoparticles with 2,4-bis(3,5-dimethylpyrazol)-triazine (ADMPT) linker. These nanocatalysts were identified by using scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), infrared spectroscopy (IR) and vibrating sample magnetometer (VSM). This protocol is developed as a safe, cost-effective and convenient alternate method for the synthesis of 1,4-DHP derivatives utilizing an eco-friendly, and a highly reusable catalyst.     

MoO3-C3N4复合光催化剂的可见光下高效催化降解甲基橙

以钼酸铵和C₃N₄为前驱体,利用浸渍法成功制备了高性能MoO₃-C₃N₄复合光催化剂,利用X射线衍射（XRD）、傅里叶红外（FT-IR）、高分辨电镜（HRTEM）及N₂吸附-脱附曲线等测试手段对所得MoO₃-C₃N₄光催化剂进行了结构和形貌表征。以可见光下光催化降解甲基橙反应表征MoO₃-C₃N₄的光催化活性。实验结果表明,MoO₃-C₃N₄光催化剂具有非常好的光催化降解性能,且MoO₃含量对反应活性产生显著影响。当MoO₃含量为1.6%（w/w）时光催化活性最好,其速率常数达到C₃N₄的50倍。通过研究发现该复合催化剂的高活性来自于其Z型光生载流子传输过程,抑制了光生电子空穴对的复合并延长了引入MoO₃产生的载流子的寿命。     

多孔超薄g-C3N4纳米片负载Pt复合材料的制备及其光催化性能

以三聚氰胺为前驱体,通过热氧化刻蚀法制备多孔超薄g-C₃N₄纳米片（CNHS）,将其与氯铂酸钾溶液混合后采用原位光化学还原法成功制备了CNHS负载Pt光催化剂（Pt-CNHS）。使用粉末X射线衍射、场发射扫描电子显微镜、X射线光电子能谱、透射电子显微镜、紫外可见漫反射光谱和N₂吸附-脱附测试等技术对所制备样品的结构、形貌、光吸收特性、光电化学性能和比表面积等进行系统分析。并以气相甲苯为目标降解物,研究其光催化性能。结果表明,相对于体相g-C₃N₄（CNB）和CNHS,Pt的引入可以有效增强催化剂对可见光的吸收能力、响应范围及载流子分离效率。与纯g-C₃N₄和CNHS相比,Pt-CNHS在紫外和可见光照射下均表现出更高的光催化降解气相甲苯的活性。此外,也对Pt-CNHS光催化剂在可见光照射下降解气相甲苯的反应历程做了初步研究。     

A simple conversion of azlactones into indenones via H3PW12O40/Al2O3 catalyzed intramolecular Friedel-Crafts reaction

A rapid and simple procedure for the synthesis of the indenone derivatives, N-(1-oxo-1H-inden-2-yl)benzamides, via intramolecular Friedel-Crafts (IFC) reaction of (Z)-4-arylidene-2-phenyl-5(4)-oxazolones (azlactones) catalyzed by H₃PW₁₂O₄₀ supported on neutral alumina under microwave irradiation has been developed. The reaction is straightforward and allows easy isolation of the product. The catalyst could be re-used up to four times after simple filtration.     

Synthesis and characterization of cobalt sulfide nanocrystals in the presence of thioglycolic acid via a simple hydrothermal method

Co₃S₄ nanocrystals were synthesized via a hydrothermal technique by adding thioglycolic acid and Co(CH₃COO)₂·4H₂O as the precursors. The effect of some parameters, such as the reaction time and temperature and concentration of reactants, on the growth and morphology of the nano-structures has been studied. The products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), photoluminescence (PL) spectroscopy and Fourier transform infrared (FT-IR) spectra.     

Uniform AMoO4:Ln (A=Sr, Ba; Ln=Eu, Tb) submicron particles: Solvothermal synthesis and luminescent properties

Rare-earth ions (Eu³⁺, Tb³⁺) doped AMoO₄ (A=Sr, Ba) particles with uniform morphologies were successfully prepared through a facile solvothermal process using ethylene glycol (EG) as protecting agent. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectra (XPS), Fourier transform infrared spectroscopy (FT-IR), photoluminescence (PL) spectra and the kinetic decays were performed to characterize these samples. The XRD results reveal that all the doped samples are of high purity and crystallinity and assigned to the tetragonal scheelite-type structure of the AMoO₄ phase. It has been shown that the as-synthesized SrMoO₄:Ln and BaMoO₄:Ln samples show respective uniform peanut-like and oval morphologies with narrow size distribution. The possible growth process of the AMoO₄:Ln has been investigated in detail. The EG/H₂O volume ratio, reaction temperature and time have obvious effect on the morphologies and sizes of the as-synthesized products. Upon excitation by ultraviolet radiation, the AMoO₄:Eu³⁺ phosphors show the characteristic ⁵D₀–⁷F_1–4 emission lines of Eu³⁺, while the AMoO₄:Tb³⁺ phosphors exhibit the characteristic ⁵D₄–⁷F_3–6 emission lines of Tb³⁺. These phosphors exhibit potential applications in the fields of fluorescent lamps and light emitting diodes (LEDs).     

Cu对K-LaZrO2异丁醇合成催化剂的影响

采用X射线衍射(XRD)、程序升温脱附(TPD)、X射线光电子能谱(XPS)、傅里叶变换红外(FTIR)光谱技术及富集法考察了K-LaZrO₂和K-CuLaZrO₂催化剂结构、CO和H₂在锆基催化剂上的吸附行为及异丁醇合成活性的影响. 结果表明, 催化剂添加Cu后, 与Zr形成较好的固溶体, 促进了CuO的分散, 且抑制了ZrO₂结晶, 增强Cu-Zr相互作用, 提高了催化活性. CO-TPD结果显示, 引入Cu后, 催化剂表面CO吸附量明显增加, 有利于碳链增长; H₂-TPD结果显示, 与活性相关的低温脱附氢量也明显增加. 另外, FTIR及富集法结果发现, Cu的引入促进了表面C₁物种的形成, 增加了表面C₁物种含量, 促进了碳链增长, 明显改善了异丁醇的选择性. 在p=10.0 MPa, 空速(GHSV)=3000 h^-1, T=360℃, V(H₂)/V(CO)=1:1条件下,异丁醇选择性达到48.5%.     

中空管状g-C3N4/Ag3PO4复合催化剂的制备及其可见光催化性能

用化学沉淀法制备中空管状g-C₃N₄/Ag₃PO₄复合催化剂。通过X射线衍射(XRD)、扫描电子显微镜(SEM)、紫外可见漫反射光谱(UV-Vis DRS)和荧光光谱对其结构、形貌和光学性能进行了表征。结果表明：Ag₃PO₄纳米颗粒均匀地分散在中空管状g-C₃N₄表面,两者紧密结合形成异质结。研究复合催化剂在可见光照射下降解盐酸四环素(TC)的光催化活性。结果显示：复合催化剂在80 min内对TC的降解率为98%,其降解反应速率常数是纯相Ag₃PO₄的3倍。经过5次循环实验后复合催化剂对于TC的降解率仍保持87%,具有优良的循环稳定性。捕获实验表明空穴(h⁺)和超氧负离子(·O^-₂)是光催化反应过程中的主要活性物种。根据能带理论,提出了复合催化剂异质结的Z型光催化机理。     

Spirooxindole-fused pyrazolo pyridine derivatives: NiO–SiO2 catalyzed one-pot synthesis and antimicrobial activities

We describe here a one-pot synthesis of 13 spirooxindole-fused pyrazolo pyridine derivatives using NiO–SiO₂ catalyst via three-component reaction of isatin, 5-amino-3-methylpyrazole, and malononitrile. This multicomponent one-pot protocol also features shorter reaction time, good yield, and simple work-up using a recoverable and reusable solid acid heterogeneous catalyst. The NiO–SiO₂ catalyst was characterized using different instrumental techniques such as X-ray diffraction study, surface area analysis, transmission electron microscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, UV-DRS (diffuse reflectance spectroscopy), and energy dispersive X-ray analysis (EDX). The new compounds were tested for in-vitro anti-microbial activity.     

偏硼酸锶催化剂光催化还原CO2合成CH4

采用溶胶-凝胶法制备出偏硼酸锶(SrB₂O₄)光催化剂. 紫外光催化还原CO₂合成CH₄(在液相水中)的实验证明: SrB₂O₄催化剂的光催化活性略高于TiO₂(P25). 利用X射线电子衍射谱(XRD)、傅里叶变换红外(FTIR)光谱、X射线光电子能谱(XPS)、透射电子显微镜(TEM)、荧光(PL)光谱和紫外-可见(UV-Vis)漫反射吸收光谱等技术, 研究了SrB₂O₄ 催化剂的晶体结构、形貌和能带结构. 结果表明: SrB₂O₄ 的价带为2.07 V (vs normalhydrogen electrode (NHE)), 低于(H₂O/H⁺)的氧化还原电位E_redox^o (0.82 V (vs NHE)); 而导带为-1.47 V (vsNHE), 高于(CO₂/CH₄)的氧化还原电位E_redox^o (-0.24 V (vs NHE)). 因此, SrB₂O₄催化剂可以有效地光催化还原CO₂生成CH₄. 与TiO₂(P25)相比, SrB₂O₄催化剂具有相对较高导带, 光生电子的还原能力强于TiO₂(P25), 更有利于CH₄的生成, 从而决定了SrB₂O₄催化剂光催化还原CO₂合成CH₄具有较高的光催化活性.