低场核磁共振结合化学计量学方法快速检测掺假核桃油

以掺假核桃油样品为低场核磁共振检测对象,利用主成分分析法(PCA)和偏最小二乘回归法(PLSR)分析处理Carr-Purcell-Meiboom-Gill(CPMG)序列的核磁共振弛豫数据,旨在探求一种能快速检测核桃油品质的新方法。对几种常见掺假形式(掺入大豆油、玉米油、葵花油)的核桃油样品和纯核桃油样品进行检测和评价。实验结果表明:纯核桃油和掺入不同种类食用油的掺假核桃油在主成分得分图上可以得到很好的区分,且掺假样品随掺假比例在图中呈规律性分布;采用PLSR法对CPMG数据和实际掺假率进行回归,可实现对核桃油掺假水平的准确定量测定。方法快速、无损、准确,在食用油制品的品质控制及评价方面具有很大的应用潜力。     

Characterization of Biodiesel by Infrared Spectroscopy with Partial Least Square Discriminant Analysis

This paper reports a method to simultaneously classify 7% biodiesel and 93% diesel based on vegetable oil as the source of the biodiesel. Mafurra, moringa, and cotton biodiesel blends were characterized by infrared spectroscopy with partial least square discriminant analysis. The efficiency of model was evaluated based on the sensitivity and specificity. The model showed excellent results as all samples were correctly classified based on the raw material. Hence, the sensitivity and specificity parameters showed values of 1, which means 100% correct characterization of the samples in the calibration and prediction sets. Therefore, infrared spectroscopy with partial least square discriminant analysis is suitable for the characterization of biodiesel/diesel blends.     

Identification of gasoline adulteration using comprehensive two-dimensional gas chromatography combined to multivariate data processing

A method to detect potential adulteration of commercial gasoline (Type C gasoline, available in Brazil and containing 25% (v/v) ethanol) is presented here. Comprehensive two-dimensional gas chromatography with flame ionization detection (GCxGC-FID) data and multivariate calibration (multi-way partial least squares regression, N-PLS) were combined to obtain regression models correlating the concentration of gasoline on samples from chromatographic data. Blends of gasoline and white spirit, kerosene and paint thinner (adopted as model adulterants) were used for calibration; the regression models were evaluated using samples of Type C gasoline spiked with these solvents, as well as with ethanol. The method was also checked with real samples collected from gas stations and analyzed using the official method. The root mean square error of prediction (RMSEP) for gasoline concentrations on test samples calculated using the regression model ranged from 3.3% (v/v) to 8.2% (v/v), depending on the composition of the blends; in addition, the results for the real samples agree with the official method. These observations suggest that GCxGC-FID and N-PLS can be an alternative for routine monitoring of fuel adulteration, as well as to solve several other similar analytical problems where mixtures should be detected and quantified as single species in complex samples.     

Quality assessment of gasoline using comprehensive two‐dimensional gas chromatography combined with unfolded partial least squares: A reliable approach for the detection of gasoline adulteration

Comprehensive two‐dimensional gas chromatography and flame ionization detection combined with unfolded‐partial least squares is proposed as a simple, fast and reliable method to assess the quality of gasoline and to detect its potential adulterants. The data for the calibration set are first baseline corrected using a two‐dimensional asymmetric least squares algorithm. The number of significant partial least squares components to build the model is determined using the minimum value of root‐mean square error of leave‐one out cross validation, which was 4. In this regard, blends of gasoline with kerosene, white spirit and paint thinner as frequently used adulterants are used to make calibration samples. Appropriate statistical parameters of regression coefficient of 0.996–0.998, root‐mean square error of prediction of 0.005–0.010 and relative error of prediction of 1.54–3.82% for the calibration set show the reliability of the developed method. In addition, the developed method is externally validated with three samples in validation set (with a relative error of prediction below 10.0%). Finally, to test the applicability of the proposed strategy for the analysis of real samples, five real gasoline samples collected from gas stations are used for this purpose and the gasoline proportions were in range of 70–85%. Also, the relative standard deviations were below 8.5% for different samples in the prediction set.     

Classification and quantification analysis of Radix scutellariae from different origins with near infrared diffuse reflection spectroscopy

A rapid near infrared spectroscopy analysis method was developed for the geographical origin discrimination and content determination of Radix scutellariae, a kind of Traditional Chinese Medicine (TCM). 81 R. scutellariae samples from six different origins were analyzed with HPLC-UV as reference method. The NIR spectra were collected in integrating-sphere diffused reflection mode and processed with different spectra pretreated methods. Discriminant analysis (DA) and discriminant partial least squares (DPLS) were applied to classify the geographical origins of those samples, and the latter had a better predictive ability with 100% accuracy after two exceptional samples eliminated from the calibration set. For the quantitative calibration, the samples were divided into calibration set and validation set by Kennard-Stone algorithm. The models of baicalin, wogonoside, baicalein, wogonin were established with partial least squares (PLS) algorithm and the optimal principal component (PC) numbers were selected with Leave-One-Out (LOO) cross-validation. The established models were evaluated with the root mean square error of prediction (RMSEP) and corresponding correlation coefficients. The correlation coefficients of all the four calibration models are above 0.920, and the RMSEPs of baicalin, wogonoside, baicalein and wogonin are 0.752%, 0.094%, 0.418% and 0.139%, respectively. This research indicated that the NIR diffuse reflection spectroscopy could be used for the rapid analysis of R. scutellariae, which is beneficial to the quality control of this raw material in TCM pharmaceutical factory, and will also help to solve analogous problems.     

Detection and quantification of honey adulteration via direct incorporation of sugar syrups or bee-feeding: preliminary study using high-performance anion exchange chromatography with pulsed amperometric detection (HPAEC-PAD) and chemometrics

Honey adulteration is a complex problem which currently has a significant economic impact and undeniable nutritional and organoleptic consequences. This paper describes the development of an effective anionic chromatographic method (HPAEC-PAD) for honey analysis and adulteration detection. The method relies on the use of chemometric methods to process chromatograms in order to achieve a better discrimination between authentic and adulterated honeys by linear discriminant analysis and to quantify adulteration levels by partial least squares analysis. This approach was investigated using honey samples adulterated from 10 to 40% with various industrial bee-feeding sugar syrups. Good results were obtained in the characterization of authentic and adulterated samples (96.5% of good classification) using linear discriminant analysis followed by a canonical analysis. The application of the partial least squares modeling method provided a corresponding linear regression model allowing the percentage of adulteration of new samples to be estimated directly from sample chromatograms.Additionally, a bee-feeding experiment on a small apiary was conducted in order to evaluate the effect of supplying hives with bee-feeding syrups. This practice is specific to the apicultural area. It has been demonstrated that bee-feeding can modify the sugar composition of the produced honey if it is conducted without safeguards.     

Characterization of Chickpea Flour by Near Infrared Spectroscopy and Chemometrics

Near infrared (NIR) spectrometry was used for the rapid characterization of quality parameters in desi chickpea flour (besan). Partial least square regression, principal component regression (PCR), interval partial least squares (iPLS), and synergy interval partial least squares (siPLS) were used to determine the protein, carbohydrate, fat, and moisture concentrations of besan. Spectra were collected in reflectance mode using a lab-built predispersive filter-based instrument from 700 to 2500?nm. The quality parameters were also determined by standard methods. The root mean square error (RMSE) for the calibration and validation sets was used to evaluate the performance of the models. The correlation coefficients for moisture, fat, protein, and carbohydrates in chickpea flour exceeded 0.96 using PLS and PCR models using the full spectral range. Wavelengths from 2100 to 2345?nm had the lowest RMSE for quality parameters by iPLS. The error was further decreased by 0.41, 0.1, and 1.1% for carbohydrates, fats, and proteins by siPLS. The NIR spectral regions yielding the lowest RMSE of prediction were 1620–2345?nm for carbohydrates, 1180–1590?nm and 1860–2094?nm for fat, and 1700–2345?nm for proteins. The study shows that chickpea flour quality parameters were accurately determined using the optimized wavelengths.     

Quantification of Corn Adulteration in Wet and Dry-Processed Peaberry Ground Roasted Coffees by UV–Vis Spectroscopy and Chemometrics

In this present research, a spectroscopic method based on UV–Vis spectroscopy is utilized to quantify the level of corn adulteration in peaberry ground roasted coffee by chemometrics. Peaberry coffee with two types of bean processing of wet and dry-processed methods was used and intentionally adulterated by corn with a 10–50% level of adulteration. UV–Vis spectral data are obtained for aqueous samples in the range between 250 and 400 nm with a 1 nm interval. Three multivariate regression methods, including partial least squares regression (PLSR), multiple linear regression (MLR), and principal component regression (PCR), are used to predict the level of corn adulteration. The result shows that all individual regression models using individual wet and dry samples are better than that of global regression models using combined wet and dry samples. The best calibration model for individual wet and dry and combined samples is obtained for the PLSR model with a coefficient of determination in the range of 0.83–0.93 and RMSE below 6% (w/w) for calibration and validation. However, the error prediction in terms of RMSEP and bias were highly increased when the individual regression model was used to predict the level of corn adulteration with differences in the bean processing method. The obtained results demonstrate that the use of the global PLSR model is better in predicting the level of corn adulteration. The error prediction for this global model is acceptable with low RMSEP and bias for both individual and combined prediction samples. The obtained RPD_p and RER_p in prediction for the global PLSR model are more than two and five for individual and combined samples, respectively. The proposed method using UV–Vis spectroscopy with a global PLSR model can be applied to quantify the level of corn adulteration in peaberry ground roasted coffee with different bean processing methods.     

Determination of total sulfur in diesel fuel employing NIR spectroscopy and multivariate calibration

A method for sulfur determination in diesel fuel employing near infrared spectroscopy, variable selection and multivariate calibration is described. The performances of principal component regression (PCR) and partial least square (PLS) chemometric methods were compared with those shown by multiple linear regression (MLR), performed after variable selection based on the genetic algorithm (GA) or the successive projection algorithm (SPA). Ninety seven diesel samples were divided into three sets (41 for calibration, 30 for internal validation and 26 for external validation), each of them covering the full range of sulfur concentrations (from 0.07 to 0.33% w/w). Transflectance measurements were performed from 850 to 1800 nm. Although principal component analysis identified the presence of three groups, PLS, PCR and MLR provided models whose predicting capabilities were independent of the diesel type. Calibration with PLS and PCR employing all the 454 wavelengths provided root mean square errors of prediction (RMSEP) of 0.036% and 0.043% for the validation set, respectively. The use of GA and SPA for variable selection provided calibration models based on 19 and 9 wavelengths, with a RMSEP of 0.031% (PLS-GA), 0.022% (MLR-SPA) and 0.034% (MLR-GA). As the ASTM 4294 method allows a reproducibility of 0.05%, it can be concluded that a method based on NIR spectroscopy and multivariate calibration can be employed for the determination of sulfur in diesel fuels. Furthermore, the selection of variables can provide more robust calibration models and SPA provided more parsimonious models than GA.     

Screening of adulteration in packaging biocomposites by infrared spectroscopy and chemometrics

Fourier transform infrared spectroscopy coupled with chemometrics was employed to detect packaging polylactic acid-based biocomposite samples adulterated with polypropylene (PP) 30–45% and linear low-density polyethylene 2–10%. Principal component analysis, soft independent modeling of class analogy (SIMCA) and partial least square discriminate analysis (PLS-DA) chemometric techniques were utilized to classify samples in different classes. Totally, 362 samples were modeled in three different classes (two adulterated and one non-adulterated). The obtained results revealed that PLS-DA is the most suitable chemometric approach for prediction of probable adulteration in biocomposite samples with reliable specificity and selectivity. It could provide 99% correct class prediction rate between non-adulterated biocomposite samples and adulterated ones, while SIMCA methods provided 73.33% prediction accuracy in classification.     

基于氨基酸描述符SVHEHS的ACE抑制肽QSAR研究

收集20种天然氨基酸的457种理化性质,按照疏水、电性特征、氢键贡献和立体特征分类后,对它们分别进行主成分分析(Principal component analysis,PCA),得到一个新的氨基酸残基结构描述符SVHEHS.用该描述符分别对血管紧张素转化酶(AngiotensinⅠconverting enzyme,ACE)抑制二肽、三肽、四肽进行序列表征,并用来与生物活性建立偏最小二乘(Partial least square regression,PLS)模型.ACE抑制二肽、三肽、四肽模型的相关系数、交叉验证相关系数、 均方根误差、外部验证相关系数分别为0.607,0.507,0.587,0.783;0.852,0.813,0.232,0.839;1,1,0,0.935.由此说明,采用SVHEHS描述符建立的PLS模型拟合、预测能力均较好,可用于血管紧张素转化酶抑制肽的定量构效关系研究.     

Composition Profiling and Authenticity Assessment of Camellia Oil Using High Field and Low Field 1H NMR

Camellia oil (CA), mainly produced in southern China, has always been called Oriental olive oil (OL) due to its similar physicochemical properties to OL. The high nutritional value and high selling price of CA make mixing it with other low-quality oils prevalent, in order to make huge profits. In this paper, the transverse relaxation time (T₂) distribution of different brands of CA and OL, and the variation in transverse relaxation parameters when adulterated with corn oil (CO), were assessed via low field nuclear magnetic resonance (LF-NMR) imagery. The nutritional compositions of CA and OL and their quality indices were obtained via high field NMR (HF-NMR) spectroscopy. The results show that the fatty acid evaluation indices values, including for squalene, oleic acid, linolenic acid and iodine, were higher in CA than in OL, indicating the nutritional value of CA. The adulterated CA with a content of CO more than 20% can be correctly identified by principal component analysis or partial least squares discriminant analysis, and the blended oils could be successfully classified by orthogonal partial least squares discriminant analysis, with an accuracy of 100% when the adulteration ratio was above 30%. These results indicate the practicability of LF-NMR in the rapid screening of food authenticity.     

基于化学模式识别技术的枳实HPLC定量指纹图谱研究

建立了枳实的高效液相色谱(HPLC)指纹图谱分析方法.色谱柱为Tnature-ACCHROM C18色谱柱(4.6 mmx250 mm,5 μm);以乙腈-0.5％甲酸水溶液为流动相进行梯度洗脱,结合液相色谱-四极杆飞行时间质谱(HPLC-QTOF-MS)联用技术对枳实指纹图谱中的共有峰进行鉴定;采用相似度评价、聚类分...     

Chemometric Techniques Applied for Classification and Quantification of Binary Biodiesel/Diesel Blends

In this paper, three different types of biodiesel, which were synthesized from peanut, corn, and canola oils, were characterized by positive-ion electrospray ionization (ESI) and Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS). Different biodiesel/diesel blends containing 2–90% (V/V) of each biodiesel type were prepared and analyzed by near infrared spectroscopy (NIR). In the next step, the chemometric methods of hierarchical clusters analysis (HCA), principal component analysis (PCA), and support vector machines (SVM) were used for exploratory analysis of the different biodiesel samples, and the SVM was able to give the best classification results (correct classification of 50 peanut and 50 corn samples, and only one misclassification out of 49 canola samples). Then, partial least squares (PLS) and multivariate adaptive regression splines (MARS) models were evaluated for biodiesel quantification. Both methods were considered equivalent for quantification purposes based on the values smaller than 5% for the root mean square error of calibration (RMSEC) and root mean square of validation (RMSEP), as well as Pearson correlation coefficients of at least 0.969. The combination of NIR to the chemometric techniques of SVM and PLS/MARS was proven to be appropriate to classify and quantify biodiesel from different origins.     

Application of Fourier transform infrared (FT-IR) spectroscopy combined with chemometrics for authentication of cod-liver oil

Some vegetable oils such as canola (CaO), corn (CO), soybean (SO), and walnut (WO) oils have similar color with cod liver oil (CLO), therefore, the presence of these oils was difficult to detect using naked eye. For this reason, Fourier transform infrared (FTIR) spectroscopy using horizontal attenuated total reflectance (HATR) as sampling accessory and in the combination with chemometrics was developed for detection and quantification of these vegetable oils as adulterants in CLO. The quantification of vegetable oils was carried out by using multivariate calibrations of partial least squares (PLS) and principle component regression (PCR), while the classification between pure CLO and CLOs adulterated with CaO, CO, SO, and WO was performed using discriminant analysis (DA). PLS with FTIR normal spectra was more suitable compared with PCR for quantification purposes with coefficient of determination (R²) higher than 0.99 and root mean square error of calibration (RMSEC) in the range of 0.04-0.82% (v/v). The PLS model was further used to predict the levels of these vegetable oils in independent samples for validation/prediction purpose. The root mean square error of prediction (RMSEP) values obtained were of 1.75% (v/v) (CaO), 1.39% (v/v) (CO), 1.35% (v/v) (SO), and 1.37% (v/v) (WO), respectively. The classification using DA revealed that the developed method can classify CLO and that mixed with these vegetable oils using 9 principal components.     

Discrimination of Polygoni Multiflori radix and Cynanchi Auriculati radix using ultra‐high performance liquid chromatography fingerprints and chemical pattern recognition

In this work, a strategy was proposed to discriminate Polygoni Multiflori Radix (PMR) and its adulterant (Cynanchi Auriculati Radix, CAR). Ultra‐high performance liquid chromatography (UHPLC) fingerprints were established to analyze samples containing PMR, CAR and mixtures simultaneously. Multivariate classification methods were applied to analyze the obtained UHPLC fingerprints, including principal component analysis (PCA), partial least square discriminant analysis (PLS‐DA), soft independent modeling of class analogy (SIMCA), support vector machine discriminant analysis (SVMDA) and counter‐propagation artificial neural network (CP‐ANN). A plot of PCA score showed that PMR and CAR samples belonged to separate clusters (PMR class and CAR class), and samples of mixtures were located near PMR or CAR classes. Analysis by PLS‐DA, SVMDA and CP‐ANN performed well for recognition and prediction in terms of PMR and CAR samples. Moreover, the PLS‐DA method performed best in the detection of adulterated samples, even if the adulterant was about 25%.     

Accurate discrimination of Gastrodia elata from different geographical origins using high‐performance liquid chromatography fingerprint combined with boosting partial least‐squares discriminant analysis

Gastrodia elata from different geographical origins varies in quality and pharmacological activity. This study focused on the classification and identification of Gastrodia elata from six producing areas using high‐performance liquid chromatography fingerprint combined with boosting partial least‐squares discriminant analysis. Before recognition analysis, a principal component analysis was applied to ascertain the discrimination possibility with high‐performance liquid chromatography fingerprints. And then, boosting partial least‐squares discriminant analysis and conventional partial least‐squares discriminant analysis were applied in this study. Experimental results indicated that the adaptive iteratively reweighted penalized least‐squares algorithm could eliminate the baseline drift of high‐performance liquid chromatography chromatograms effectively. And compared with partial least‐squares discriminant analysis, the total recognition rates using high‐performance liquid chromatography fingerprint combined with boosting partial least‐squares discriminant analysis for the calibration sets and prediction sets were improved from 94 to 100% and 86 to 97%, respectively. In conclusion, high‐performance liquid chromatography combined with boosting partial least‐squares discriminant analysis, which has such advantages as effective, specific, accurate, non‐polluting, has an edge for discrimination of traditional Chinese medicine from different geographical origins. And the proposed methodology is a useful tool to classify and identify Gastrodia elata from different geographical origins.     

Quantitative analysis of two adulterants in Cynanchum stauntonii by near-infrared spectroscopy combined with multi-variate calibrations

Authentication of traditional Chinese medicines (TCMs) has become important because they can be adulterated with relatively cheap herbal medicines similar in appearance. Detection of such adulterated samples is needed because their presence is likely to reduce the pharmacological potency of the original TCM and, in the worst cases, the samples may be harmful. The aim of this study was to develop a rapid near-infrared spectroscopy (NIRS) analytical method which was supported by multi-variate calibration, e.g. partial least squares regression (PLSR) and radial basis function artificial neural networks (RBF-ANN), in order to quantify the TCM and the adulterants. In this work, Cynanchum stauntonii (CS), a commonly used TCM, in mixtures with one or two adulterants ?? two morphological types of TCM, Cynanchum atrati (CA) and Cynanchum paniculati (CP), were determined using NIR reflectance spectroscopy. The three sample sets, CS adulterated with CA or CP, and CS with both CA and CP, were measured in the range of 800?C2500 nm. Both PLSR and RBF-ANN calibration models provided satisfactory results, even at an adulteration level of 5 mass %, but the RBF-ANN models with better root mean square error of prediction (RMSEP) values for CS, CA, and CP arguably performed better. Consequently, this work demonstrates that the NIR method of sampling complex mixtures of similar substances such as CS adulterated by CA and/or CP is capable of producing data suitable for the quantitative analysis of mixtures consisting of the original TCM adulterated by one or two similar substances, provided the spectral data are interrogated by multi-variate methods of data analysis such as PLS or RBF-ANN.     

Boosting partial least‐squares discriminant analysis with application to near infrared spectroscopic tea variety discrimination

In the present study, boosting has been combined with partial least‐squares discriminant analysis (PLS‐DA) to develop a new pattern recognition method called boosting partial least‐squares discriminant analysis (BPLS‐DA). BPLS‐DA is implemented by firstly constructing a series of PLS‐DA models on the various weighted versions of the original calibration set and then combining the predictions from the constructed PLS‐DA models to obtain the integrative results by weighted majority vote. Coupled with near infrared (NIR) spectroscopy, BPLS‐DA has been applied to discriminate different kinds of tea varieties. As comparisons to BPLS‐DA, the conventional principal component analysis, linear discriminant analysis (LDA), and PLS‐DA have also been investigated. Experimental results have shown that the inter‐variety difference can be accurately and rapidly distinguished via NIR spectroscopy coupled with BPLS‐DA. Moreover, the introduction of boosting drastically enhances the performance of an individual PLS‐DA, and BPLS‐DA is a well‐performed pattern recognition technique superior to LDA. Copyright © 2012 John Wiley & Sons, Ltd.     

Adulteration of diesel/biodiesel blends by vegetable oil as determined by Fourier transform (FT) near infrared spectrometry and FT-Raman spectroscopy

In this work it has been shown that the routine ASTM methods (ASTM 4052, ASTM D 445, ASTM D 4737, ASTM D 93, and ASTM D 86) recommended by the ANP (the Brazilian National Agency for Petroleum, Natural Gas and Biofuels) to determine the quality of diesel/biodiesel blends are not suitable to prevent the adulteration of B2 or B5 blends with vegetable oils. Considering the previous and actual problems with fuel adulterations in Brazil, we have investigated the application of vibrational spectroscopy (Fourier transform (FT) near infrared spectrometry and FT-Raman) to identify adulterations of B2 and B5 blends with vegetable oils. Partial least square regression (PLS), principal component regression (PCR), and artificial neural network (ANN) calibration models were designed and their relative performances were evaluated by external validation using the F-test. The PCR, PLS, and ANN calibration models based on the Fourier transform (FT) near infrared spectrometry and FT-Raman spectroscopy were designed using 120 samples. Other 62 samples were used in the validation and external validation, for a total of 182 samples. The results have shown that among the designed calibration models, the ANN/FT-Raman presented the best accuracy (0.028%, w/w) for samples used in the external validation.