CLASSICAL AND HOMOGENIZED EXPRESSIONS FOR BUCKLING SOLUTIONS OF FUNCTIONALLY GRADED MATERIAL LEVINSON BEAMS

The relationship between the critical buckling loads of functionally graded material(FGM) Levinson beams(LBs) and those of the corresponding homogeneous Euler-Bernoulli beams(HEBBs) is investigated. Properties of the beam are assumed to vary continuously in the depth direction. The governing equations of the FGM beam are derived based on the Levinson beam theory, in which a quadratic variation of the transverse shear strain through the depth is included.By eliminating the axial displacement as well as the rotational angle in the governing equations,an ordinary differential equation in terms of the deflection of the FGM LBs is derived, the form of which is the same as that of HEBBs except for the definition of the load parameter. By solving the eigenvalue problem of ordinary differential equations under different boundary conditions clamped(C), simply-supported(S), roller(R) and free(F) edges combined, a uniform analytical formulation of buckling loads of FGM LBs with S-S, C-C, C-F, C-R and S-R edges is presented for those of HEBBs with the same boundary conditions. For the C-S beam the above-mentioned equation does not hold. Instead, a transcendental equation is derived to find the critical buckling load for the FGM LB which is similar to that for HEBB with the same ends. The significance of this work lies in that the solution of the critical buckling load of a FGM LB can be reduced to that of the HEBB and calculation of three constants whose values only depend upon the throughthe-depth gradient of the material properties and the geometry of the beam. So, a homogeneous and classical expression for the buckling solution of FGM LBs is accomplished.     

THERMAL POST-BUCKLING OF FUNCTIONALLY GRADED MATERIAL TIMOSHENKO BEAMS

Analysis of thermal post-buckling of FGM (Functionally Graded Material) Timoshenko beams subjected to transversely non-uniform temperature rise is presented. By accurately considering the axial extension and transverse shear deformation in the sense of theory of Timoshenko beam, geometrical nonlinear governing equations including seven basic unknown functions for functionally graded beams subjected to mechanical and thermal loads were formulated. In the analysis, it was assumed that the material properties of the beam vary continuously as a power function of the thickness coordinate. By using a shooting method, the obtained nonlinear boundary value problem was numerically solved and thermal buckling and post-buckling response of transversely non-uniformly heated FGM Timoshenko beams with fixed-fixed edges were obtained. Characteristic curves of the buckling deformation of the beam varying with thermal load and the power law index are plotted. The effects of material gradient property on the buckling deformation and critical temperature of beam were discussed in details. The results show that there exists the tension-bend coupling deformation in the uniformly heated beam because of the transversely non-uniform characteristic of materials.     

功能梯度变曲率曲梁的几何非线性模型及其数值解

基于弹性曲梁平面问题的精确几何非线性理论,建立了功能梯度变曲率曲梁在机械和热载荷共同作用下的无量纲控制方程和边界条件,其中基本未知量均被表示为变形前的轴线坐标的函数.以椭圆弧曲梁为例,采用打靶法求解非线性常微分方程的两点边值问题,获得了两端固定功能梯度椭圆弧曲梁在横向非均匀升温下的热弯曲变形数值解,分析了材料梯度指数、温度参数、结构几何参数等对曲梁受力及变形的影响.     

功能梯度梁与均匀梁静动态解间的相似转换

基于Euler-Bernoulli 梁理论, 研究了功能梯度材料梁的弯曲、屈曲和自由振动. 通过分析和比较功能梯度材料梁 和均匀梁的控制方程, 得到了功能梯度材料梁与均匀梁的解之间的相似转换关系. 在给定功 能梯度材料梁的材料性质在横向按幂函数分布的情况下, 导出了解之间的相似转换系数的解 析表达式. 该系数集中反映了功能梯度梁的材料非均匀性. 因此, 可将功能梯度材料梁的静 动态问题的求解转换为同样载荷和边界条件下均匀梁的静动态问题求解以及相似转换系数的 计算.     

热荷载作用下Timoshenko功能梯度夹层梁的静态响应

在精确考虑轴线伸长和一阶横向剪切变形的基础上建立了Timoshenko功能梯度夹层梁在热载荷作用下的几何非线性控制方程.采用打靶法数值求解所得强非线性边值问题,获得了两端固支功能梯度夹层梁在横向非均匀升温作用下的静态热过屈曲和热弯曲变形数值解.分析了功能梯度材料参数变化、不同表层厚度和升温参数对夹层梁弯曲变形、拉-弯耦合变形的影响,并给出温度函数在夹层梁厚度方向的具体分布形式.     

An analytical study on the nonlinear vibration of functionally graded beams

Nonlinear vibration of beams made of functionally graded materials (FGMs) is studied in this paper based on Euler-Bernoulli beam theory and von Kármán geometric nonlinearity. It is assumed that material properties follow either exponential or power law distributions through thickness direction. Galerkin procedure is used to obtain a second order nonlinear ordinary equation with quadratic and cubic nonlinear terms. The direct numerical integration method and Runge-Kutta method are employed to find the nonlinear vibration response of FGM beams with different end supports. The effects of material property distribution and end supports on the nonlinear dynamic behavior of FGM beams are discussed. It is found that unlike homogeneous beams, FGM beams show different vibration behavior at positive and negative amplitudes due to the presence of quadratic nonlinear term arising from bending-stretching coupling effect.     

Nonlinear stability and vibration of pre/post-buckled microstructure-dependent FGPM actuators

The present study deals with the study of the nonlinear stability and small free vibration of microstructure-dependent functionally graded piezoelectric material (FGPM) beams in pre/post-buckling regimes. The Timoshenko beam theory with various inplane and out-of-plane boundary conditions are considered under different types of mechanical and thermal loads. The beam is assumed to be under inplane mechanical, thermal, and electrical excitations. Each thermo-electro-mechanical property of the beam is graded across the thickness (i.e., height) of the beam, based on a power law model. The von Kármán type geometric nonlinearity is included to account for the large deflection behavior of the beam under inplane loads. The modified couple stress theory is included to account for the size effects. A weak-form, displacement-based, finite element formulation is developed to discretize the equations of motion. The resulting system of nonlinear algebraic equations is solved using Newton’s iterative method. The numerical results of frequencies and lateral deflections as a function of load parameters reveal the existence of bifurcation or critical states in some cases. The effects of load type, microstructural dependency, boundary conditions, beam geometry, composition rule of the constituents, and actuator voltage are discussed through the various parametric studies.     

非保守功能梯度弹性组合曲梁的精确模型及其数值解

基于直法线假设,采用可伸长梁的几何非线性理论,建立了功能梯度材料弹性组合曲梁受切线均布随从力作用下的静态大变形数学模型。该模型不仅计及了轴线伸长,同时也精确地考虑了梁的初始曲率对变形的影响以及轴向变形与弯曲变形之间的耦合效应。用打靶法数值求解了由金属和陶瓷两相材料所构成的一种FGM组合曲梁在沿轴线均布切向随动载荷作用下的非线性平面弯曲问题,给出了不同梯度指标下FGM弹性曲梁随载荷参数大范围变化的平衡路径,并与金属和陶瓷两种单相材料曲梁的相应特性进行了比较。     

考虑前屈曲耦合变形时功能梯度简支梁的稳定性分析

在某些边界条件下,功能梯度材料（FGM）梁会由于拉弯耦合产生前屈曲耦合变形,而该变形对FGM梁的稳定性有影响。本文假设FGM梁的材料性质只沿厚度方向进行变化,基于经典非线性梁理论和物理中面概念,推导出FGM梁的平衡方程以及包含前屈曲耦合变形影响的屈曲控制方程,并用打靶法进行数值求解。讨论了前屈曲耦合变形、梯度指数以及材料性质的温度依赖等因素对FGM梁非线性变形和稳定性的影响。     

经典梁热过屈曲问题的解析解

基于非线性经典梁理论,建立了控制轴向和横向变形的基本方程,将两个非线性方程化简为一个关于横向挠度的四阶非线性积分-微分方程。对于本文所考虑的三类边界条件,该方程与相应的边界条件构成了微分特征值问题;直接求解该问题,得到热过屈曲构形的解析解,该解是外加热载荷的函数。为考察热载荷以及边界条件的影响,根据得到的解析解给出了一些数值算例,讨论了梁过屈曲行为的性质。本文得到的解析解可用于验证或改进各类近似理论和数值方法。     

热载荷作用下梯度多孔材料梁弯曲及过屈曲力学行为的研究

基于Bernoulli-Euler梁理论,引入物理中面解耦了复合材料结构的面内变形与横向弯曲特性,研究了梯度多孔材料矩形截面梁在热载荷作用下的弯曲及过屈曲力学行为．假设沿梁厚度方向材料的性质是连续变化的,利用能量法推导了矩形截面梁的控制微分方程和边界条件,并用打靶法对无量纲化的控制方程进行数值求解．利用计算得到的结果分析了材料的性质、热载荷、边界条件对矩形截面梁非线性力学行为的影响．结果表明,对称材料模型下,固支梁与简支梁均显示出了典型的分支屈曲行为特征,而其临界屈曲热载荷值均会随着孔隙率系数的增加而单调增加．非对称材料模型下,固支梁仍显示出分支屈曲行为特征,但其临界屈曲热载荷不再随着孔隙率系数的变化而单调变化;而对于两端简支梁,发生了弯曲变形,弯曲挠度随载荷的增大而增大．     

功能梯度材料梁自由振动的线性与非线性振动

基于数值模拟和理论分析两种方法,研究了功能梯度材料(functional gradient materials,FGM) 梁自由振动下的线性与非线性振动问题。通过解析法求解了FGM梁在经典理论下以及一阶剪切理论下的力学行为,得到了FGM梁在简支和固端约束下的固有频率。理论分析了不同边界条件、不同梁理论下、梯度指数、长细比等因素对于FGM梁固有频率的影响;不论经典梁理论还是一阶剪切理论,随着梯度指数的增加,FGM梁的固有频率都随之减小。通过ABAQUS 仿真模拟,得到FGM梁数值模拟下的非线性固有频率。将理论解与数值解进行对比,完善力学模型。在多种理论下,利用解析法和数值模拟的方法,给出FGM梁结构振动响应的线性与非线性解。

     

Free vibration of functionally graded material beams with surface-bonded piezoelectric layers in thermal environment

Free vibration of statically thermal postbuckled functionally graded material （FGM） beams with surface-bonded piezoelectric layers subject to both temperature rise and voltage is studied. By accurately considering the axial extension and based on the Euler-Bernoulli beam theory, geometrically nonlinear dynamic governing equations for FGM beams with surface-bonded piezoelectric layers subject to thermo-electro- mechanical loadings are formulated. It is assumed that the material properties of the middle FGM layer vary continuously as a power law function of the thickness coordinate, and the piezoelectric layers are isotropic and homogenous. By assuming that the amplitude of the beam vibration is small and its response is harmonic, the above mentioned non-linear partial differential equations are reduced to two sets of coupled ordinary differential equations. One is for the postbuckling, and the other is for the linear vibration of the beam superimposed upon the postbuckled configuration. Using a shooting method to solve the two sets of ordinary differential equations with fixed-fixed boundary conditions numerically, the response of postbuckling and free vibration in the vicinity of the postbuckled configuration of the beam with fixed-fixed ends and subject to transversely nonuniform heating and uniform electric field is obtained. Thermo-electric postbuckling equilibrium paths and characteristic curves of the first three natural frequencies versus the temperature, the electricity, and the material gradient parameters are plotted. It is found that the three lowest frequencies of the prebuckled beam decrease with the increase of the temperature, but those of a buckled beam increase monotonically with the temperature rise. The results also show that the tensional force produced in the piezoelectric layers by the voltage can efficiently increase the critical buckling temperature and the natural frequency.     

Thermal post-buckling and nonlinear vibration analysis of FGM beams based on physical neutral surface and high order shear deformation theory

Thermal post-buckling and nonlinear vibration behaviors of FGM beams are analyzed by using concept of physical neutral surface, von Kármán strain-displacement relationships and high order shear deformation theory. Material properties are assumed to be temperature dependent and vary along the thickness. The prominent character of physical neutral surface higher-order shear deformation beam theory is that stretching-bending couplings are eliminated in constitutive equations, and governing equations have the similar forms as homogeneous isotropic beams. Approximate solutions are given out by Ritz method, and influences played by different supported boundaries, thermal environmental conditions and volume fraction index are discussed in detail.     

Series solution for large deflections of a cantilever beam with variable flexural rigidity

In this paper large deflection and rotation of a nonlinear Bernoulli-Euler beam with variable flexural rigidity and subjected to a static co-planar follower loading is studied. It is assumed that the angle of inclination of the force with respect to the deformed axis of the beam remains unchanged during deformation. The governing equation of this problem is solved analytically for the first time using a new kind of analytical technique for nonlinear problems, namely the Homotopy Analysis Method (HAM). The present solution can be used for the analysis of a wide range of loads, material/cross section properties and lengths for beams undergoing large deformations. The results obtained from HAM are compared with results reported in previous works. Finally, the load–displacement characteristics of a uniform cantilever beam with different material properties under a follower force applied normal to the deformed beam axis are presented.     

粘贴压电层功能梯度材料Timoshenko梁的热过屈曲分析

研究了上下表面粘贴压电层的功能梯度材料Timoshenko梁在升温及电场作用下的过屈曲行为。在精确考虑轴线伸长和一阶横向剪切变形的基础上,建立了压电功能梯度Timoshenko层合梁在热-电-机械载荷作用下的几何非线性控制方程。其中,假设功能梯度的材料性质沿厚度方向按照幂函数连续变化,压电层为各向同性均匀材料。采用打靶法数值求解所得强非线性边值问题,获得了在均匀电场和横向非均匀升温场内两端固定Timoshenko梁的静态非线性屈曲和过屈曲数值解。并给出了梁的变形随热、电载荷及材料梯度参数变化的特性曲线。结果表明,通过施加电压在压电层产生拉应力可以有效地提高梁的热屈曲临界载荷,延缓热过屈曲发生。由于材料在横向的非均匀性,即使在均匀升温和均匀电场作用下,也会产生拉-弯耦合效应。但是对于两端固定的压电-功能梯度材料梁,在横向非均匀升温下过屈曲变形仍然是分叉形的。     

Free vibration of functionally graded beams based on both classical and first-order shear deformation beam theories

The free vibration of functionally graded material （FGM） beams is studied based on both the classical and the first-order shear deformation beam theories. The equations of motion for the FGM beams are derived by considering the shear deforma- tion and the axial, transversal, rotational, and axial-rotational coupling inertia forces on the assumption that the material properties vary arbitrarily in the thickness direction. By using the numerical shooting method to solve the eigenvalue problem of the coupled ordinary differential equations with different boundary conditions, the natural frequen- cies of the FGM Timoshenko beams are obtained numerically. In a special case of the classical beam theory, a proportional transformation between the natural frequencies of the FGM and the reference homogenous beams is obtained by using the mathematical similarity between the mathematical formulations. This formula provides a simple and useful approach to evaluate the natural frequencies of the FGM beams without dealing with the tension-bending coupling problem. Approximately, this analogous transition can also be extended to predict the frequencies of the FGM Timoshenko beams. The numerical results obtained by the shooting method and those obtained by the analogous transformation are presented to show the effects of the material gradient, the slenderness ratio, and the boundary conditions on the natural frequencies in detail.     

Geometrical nonlinear analysis of thin-walled composite beams using finite element method based on first order shear deformation theory

Based on a seven-degree-of-freedom shear deformable beam model, a geometrical nonlinear analysis of thin-walled composite beams with arbitrary lay-ups under various types of loads is presented. This model accounts for all the structural coupling coming from both material anisotropy and geometric nonlinearity. The general nonlinear governing equations are derived and solved by means of an incremental Newton–Raphson method. A displacement-based one-dimensional finite element model that accounts for the geometric nonlinearity in the von Kármán sense is developed to solve the problem. Numerical results are obtained for thin-walled composite beam under vertical load to investigate the effects of fiber orientation, geometric nonlinearity, and shear deformation on the axial–flexural–torsional response.     

Analysis for the thermoelastic bending of a functionally graded material cylindrical shell

An analytic study for thermoelastic bending of a functionally graded material (FGM) cylindrical shell subjected to a uniform transverse mechanical load and non-uniform thermal loads is presented. Based on the classical linear shell theory, the equations with the radial deflection and horizontal displacement are derived out. An arbitrary material property of the FGM cylindrical shell is assumed to vary through the thickness of the cylindrical shell, and exact solution of the problem is obtained by using an analytic method. For the FGM cylindrical shell with fixed and simply supported boundary conditions, the effects of mechanical load, thermal load and the power law exponent on the deformation of the FGM cylindrical shell are analyzed and discussed.     

Free vibration analysis of functionally graded material beams based on Levinson beam theory

Free vibration response of functionally graded material (FGM) beams is studied based on the Levinson beam theory (LBT). Equations of motion of an FGM beam are derived by directly integrating the stress-form equations of elasticity along the beam depth with the inertial resultant forces related to the included coupling and higherorder shear strain. Assuming harmonic response, governing equations of the free vibration of the FGM beam are reduced to a standard system of second-order ordinary differential equations associated with boundary conditions in terms of shape functions related to axial and transverse displacements and the rotational angle. By a shooting method to solve the two-point boundary value problem of the three coupled ordinary differential equations, free vibration response of thick FGM beams is obtained numerically. Particularly, for a beam with simply supported edges, the natural frequency of an FGM Levinson beam is analytically derived in terms of the natural frequency of a corresponding homogenous Euler-Bernoulli beam. As the material properties are assumed to vary through the depth according to the power-law functions, the numerical results of frequencies are presented to examine the effects of the material gradient parameter, the length-to-depth ratio, and the boundary conditions on the vibration response.