共振瑞利散射法对普萘洛尔特效适配体系的手性分析

本文提出了对于手性药物普萘洛尔手性识别和手性分析的新方法。 该方法引用基于氧化石墨烯的指数富集配体系统进化筛选技术(GO-SELEX),经过10轮优化筛选出对心血管药物普萘洛尔有高度亲和力的特效适配体。 然后通过共振瑞利散射光谱法(RRS)对反应体系进行特效性检测,实验表明S-普萘洛尔和R-普萘洛尔有迥然不同的光谱差异,S-普萘洛尔与特效适配体结合后的RRS显著增强,而R-普萘洛尔与适配体结合后的RRS几乎没有变化。 据此可以对心血管药物手性普萘洛尔进行有效的手性识别。 在考察反应体系和实验条件的基础上,可对S-普萘洛尔进行实验检测,同时对外消旋体中的R-普萘洛尔进行计算分析。 实验对S-普萘洛尔的线性范围为5~275 nmol/L,检测限为0.5 nmol/L。 方法应用于外消旋药片的分析检测,结果令人满意。 实验表明,RRS检测特效适配体结合的手性靶标体系会彰显不同的光谱差异,从而可对手性对映体进行手性识别,尤其是可利用其光谱差异实现同时测定的手性分析,方法可在特殊情形下不经分离而同时测定手性对映体,具有推广应用价值。     

直链淀粉-三[(S)-1-苯乙基氨基甲酸酯]手性固定相拆分布地奈德对映体及其制剂含量的测定

22R-布地奈德的药物活性比22S-布地奈德的强2~3倍,开发布地奈德对映体拆分和定量分析方法,可为其药物研发及质量控制提供重要依据。目前,主要以反相C₁₈固定相对布地奈德对映体进行拆分,而采用手性固定相对其进行拆分少有报道。通过考察固定相、流动相和柱温对布地奈德对映体拆分的影响,建立了基于直链淀粉-三[(S)-1-苯乙基氨基甲酸酯]手性固定相快速拆分和检测布地奈德对映体的高效液相色谱方法,其色谱条件如下:色谱柱为Chiralpak AS-RH色谱柱(150 mm×4.6 mm, 5.0 μm),流动相为乙腈-水(45∶55, v/v),柱温40 ℃,流速1.0 mL/min,二极管阵列检测器(DAD),检测波长246 nm,进样量10 μL。在该色谱条件下,布地奈德的两个对映体得到较好拆分,22R-布地奈德和22S-布地奈德的保留时间分别6.40 min和7.77 min,分离度为4.64; 22R-布地奈德和22S-布地奈德分别在各自范围内线性关系良好,相关系数(R²)均为0.9999,检出限分别为0.05 μg/mL和0.07 μg/mL,定量限分别为0.16 μg/mL和0.20 μg/mL; 4个添加水平的样品加标回收率为102.63%~104.17%,相对标准偏差(RSD)为0.08%~0.57%(n=6)。将该方法应用于1批次4个吸入用布地奈德混悬液实际样品进行检测,22R-布地奈德和22S-布地奈德的含量分别为283.15~284.63 μg/mL和259.86~261.51 μg/mL。该方法操作简便,分析时间短,重复性好,准确度高,可用于布地奈德对映体的拆分及其制剂的质量控制。     

分子对接研究β-受体阻滞剂及其类似物毛细管电泳手性识别机理

利用分子对接软件AutoDock程序计算了羟丙基-β-环糊精与β-受体阻滞剂心得安及5种类似物相互作用的结合自由能.结果表明:结合自由能的大小与迁移时间长短的顺序一致;结合自由能差异值的绝对值的大小与手性选择性因子、分离度大小顺序一致,正确反映了羟丙基-β-环糊精对β-受体阻滞剂心得安及5种类似物对映体的R/S识别顺序...     

基于手性配体交换反应立体选择性萃取分离氧氟沙星对映体

基于配体交换反应,研究了氧氟沙星对映体在含有Cu²⁺和N-n-十二烷基-L-脯氨酸手性配体(L)两相体系中的分配平衡.在不同pH条件下,考察了Cu²⁺在含有N-n-十二烷基-L-脯氨酸两相中的分布;研究了pH,Cu²⁺浓度,手性配体浓度等因素对氧氟沙星对映体在两相中的分配系数(K)和分离因子(α)的影响.实验结果表明,N-n-十二烷基-L-脯氨酸对R-氧氟沙星对映体萃取能力大于对S-对映体的萃取能力;pH对K和α的影响很大,在pH值小于3.5时,L₂Cu二元配合物的生成在热力学上看是不适宜的,萃取时pH宜大于3.5;手性配体和Cu²⁺摩尔比为2:1,K和α最佳;使用2×1中空纤维膜对氧氟沙星对映体进行萃取分离,出口水相氧氟沙星对映体浓度比值(S/R)约为1.72.     

芳香取代基结构对螺旋聚乙炔高效液相色谱手性固定相手性识别性能的影响

设计合成了3种源于脯氨酸的手性乙炔基单体——(S)-2-乙炔基-N-芳香胺基甲酰基吡咯烷. 在氯化降冰片二烯铑二聚体{[Rh(nbd)Cl]₂}-三乙胺催化下, 3种单体被转化为相应的光学活性螺旋聚合物. 用高效液相色谱评估了3种聚合物作为手性固定相(CSPs)对9种底物的手性识别性能. 以正己烷/异丙醇(体积比9∶1)为流动相时, 3种聚合物对3对种氢键给体分子苯偶姻(α=1.35~1.44)、 三氟-1-(9-蒽基)乙醇(α=1.11~1.53)、 2,2′-二羟基-1,1′-联萘(α=1.09~1.11)及乙酰丙酮钴(α=1.84~2.38)表现出很好的手性识别能力; 当以正己烷为流动相时, 3种聚合物都能立体选择性地识别氢键给体分子2,2-二甲基-1-苯基-1-丙醇(α=1.12~1.22), 聚[(S)-2-乙炔基-N-(2′-萘基胺基甲酰基)吡咯烷]能识别氢键受体分子2-苯基环己酮(α=1.11). 结合核磁共振波谱、 拉曼光谱、 旋光测试、 紫外吸收光谱和圆二色光谱及液相色谱等方法, 系统研究了芳香侧基结构与连接位置对聚合物螺旋构象和对映体选择性拆分能力的影响. 分子对接模拟结果表明, 1-萘基的空间位阻大于2-萘基且可促进形成更强的分子内氢键, 不利于大尺寸底物(如联萘酚)的手性拆分. 与苯基相比, 引入萘基有利于增强聚合物与底物间的π-π相互作用, 提高聚合物的立体选择性和手性识别能力.     

超分子手性聚苯胺-金复合纳米酶的构建及其对映选择性催化

对映选择性催化是生物体内普遍存在的反应,与生命的产生代谢有着非常紧密的联系。设计研发具有高对映选择性催化效果的纳米酶在各类生物医药相关领域都至关重要。目前,关于纳米酶的研究大都集中在提高其催化活性,而涉及纳米酶对映选择性的研究相对较少。已有对映选择性酶催化报道表明,手性纳米酶主要通过手性分子修饰纳米颗粒来构建。考虑到天然酶的选择性不仅仅取决于氨基酸等手性分子的手性,而且与蛋白质空间排列和折叠所产生的超分子手性微环境密切相关,因此构建具有超分子手性微环境的纳米酶也成为设计具有优异对映选择性纳米酶的有效途径。此外,为了进一步提高手性纳米酶的对映选择性,深入理解手性纳米酶选择性因子的影响因素也成为一个重要研究方向。基于此,本文构建了一种由不含任何手性分子的M-聚苯胺(M-PANI)扭曲纳米带和三种不同尺寸(3、10和16 nm)的金纳米颗粒(AuNPs)组成的超分子纳米复合材料。扫描电子显微镜、透射电子显微镜、紫外-可见吸收光谱和X射线光电子能谱结果证实了M-PANI-Au超分子纳米复合材料的成功制备。同时,圆二色光谱显示M-PANI-Au超分子复合材料具有清晰的手性信号,表明它们在手性纳米催化方面具有潜在应用。以手性R-/S-3, 4-二羟基苯丙氨酸(R-/S-DOPA)对映体的催化氧化为模型反应,该类纳米酶对R-DOPA的催化选择性均高于对S-DOPA。进一步研究表明,得益于超分子手性聚苯胺载体和3 nm AuNPs之间的强手性传递作用,3 nm Au NPs(2.59)负载的M-PANI比10 nm Au NPs(1.46)和16 nm NPs(1.58)负载的M-PANI具有更高的选择因子。这一发现阐明了手性转移是调控对映选择性催化的关键影响因素,为负载型超分子手性纳米酶的构建和设计提供了方向和指导。     

手性固定相Chirex 3001对安息香和联萘酚及其类似物的分子识别

利用分子力学方法, 建立了苯基甘氨酸型手性固定相Chirex 3001的简化模型, 并探讨了手性固定相Chirex 3001与安息香和联萘酚及其类似物的识别机制. 模拟结果表明, 固定相主体与手性客体分子识别作用的推动力主要来自于它们之间的π-π堆积、氢键和范德华等作用. 主体与(S)-构型的客体1～3结合能力强于(R)-构型的客体, 而对于客体4～6, 则是与(R)-构型的结合强于(S)-构型, 这与高效液相色谱拆分实验结果相符. 客体1～3对映体在Chirex 3001柱上的分离因子分别为1.02, 1.04和1.11, (R)-构型先被洗脱; 客体4～6对映体的分离因子分别为1.23, 1.26和1.09, (S)-构型先被洗脱.     

手性钌螯合催化剂的合成及在α⁃羟基酯的动态动力学氢化反应中的应用

设计并合成了一系列基于(R)-2-(二苯基膦基)-1-苯基-N-(2′-吡啶甲基)-1-乙胺及其衍生物的手性钌螯合催化剂. 采用核磁共振波谱及高分辨质谱对其进行表征, 并给出单晶结构. 以α-羟基酯类化合物为研究对象, 通过酯的动态动力学氢化还原反应, 发展了一种合成手性二醇的方法.研究结果表明, 该催化体系能有效实现酯的氢化还原, 并获得一定的对映选择性.     

基于半刚性乳酸衍生物的单一手性配位聚合物的合成、 结构与性质

在溶剂热反应条件下, 用预先合成的乳酸衍生物(R)-H₂CBA和(S)-H₂CBA分别与含氮辅助配体(E)-1,2-二(4-吡啶基)乙烯(DPEE)和1,4-二(1H-咪唑-1-基)苯(1,4-DIB)组合, 制备出2对不同结构的单一手性配位聚合物[Cd₂((R)-CBA)₂(DPEE)(H₂O)₂]_n(1-D), [Cd₂((S)- CBA)₂(DPEE)(H₂O)₂]_n(1-L), [Cd((R)-CBA)(1,4-DIB)]·H₂O(2-D)和[Cd((S)-CBA)(1,4-DIB)]·H₂O(2-L). 其中1-D和1-L是由梯形Cd-CBA链和DPEE配体连接成的二维框架结构; 而2-D和2-L是三维超分子框架结构, 包含3种不同类型的对映手性螺旋链. 对上述化合物进行了粉末X射线衍射、 热重分析和圆二色谱分析, 并对其荧光性质进行了讨论.     

手性樟脑衍生的共价有机骨架材料用作高效液相色谱固定相分离手性化合物

共价有机骨架材料（COFs）作为一种新型的晶体多孔材料,其手性共价骨架材料在手性分离领域具有良好的应用前景。本文以1,3,5-三醛基间苯三酚（Tp）和3,3′-二硝基联苯胺（BD）反应合成出TpBD（NH₂）₂,并以此作为基本共价有机骨架。用（1S）-（+）-10-樟脑磺酰氯对该骨架进行衍生修饰,制备出手性共价有机骨架材料TpBD（NH₂）₂的（1S）-（+）-10-樟脑磺酰氯（Cam）衍生物（TpBD-1S-（+）-Cam）。结果表明,制备的手性共价有机骨架材料TpBD-1S-（+）-Cam能够分离华法林、马来酸氯苯那敏、阿替洛尔、美托洛尔、佐匹克隆、1-（9-蒽基）-2,2,2-三氟乙醇、1,2-二苯乙醇酮、酮洛芬、盐酸美西律和噻吗洛尔共10种外消旋体以及o,m,p-溴苯胺、o,m,p-碘苯胺2种苯系位置异构体,分离效果较好。该材料用作高效液相色谱固定相具有良好的开发潜力和应用价值。     

基于手性固定相的超高效液相色谱-串联质谱法检测小麦及其加工制品中的腈菌唑对映体

建立了手性超高效液相色谱-串联质谱检测小麦及其加工制品中腈菌唑对映体残留的分析方法.样品经乙腈提取,N-丙基乙二胺(PSA)和C18净化,手性色谱柱Lux Cellulose-1(150 mm×2.0 mm,3μm)分离,质谱电喷雾正离子扫描(ESI+),多反应监测(MRM)模式进行检测.为准确定量,考察了小麦籽粒及其...     

Synthesis of four stereoisomers of the higher dipteran juvenile hormone III bisepoxide

The 6S,7S,10R-, 6S,7S,10S-, 6R,7R,10S-, and 6R,7R,10R-stereoisomers of the juvenile hormone III bisepoxide from higher Dipteran insects have been synthesised in high stereoisomeric purity. The route involves Sharpless epoxidation of geraniol to enantiomeric epoxyalcohols, which are each elaborated via separable diastereomeric bromohydrins.     

Synthesis, isolation and structural characterization of optically active planar chiral cyclomercurated ferrocenylimines

Asymmetric cyclomercuration of chiral ferrocenylimines (+)-(R)-2 and (−)-(S)-2 with mercuric acetate and subsequent treatment by lithium chloride gave two different pairs of diastereomeric cyclomercurated ferrocenylimines. The four enantiomerically pure compounds with both planar and central chirality were isolated from the two pairs by thin layer chromatography. The structures and absolute configurations of these complexes were determined by single-crystal X-ray analysis and characterized by IR, ¹H NMR, specific rotation and elemental analysis.     

Unprecedented base effect on the synthesis of chiral phosphinate esters: A new route to P-chiral phosphine oxides of high enantiomeric purity

The stereochemical outcome of the reaction of chiral secondary alcohols with a phosphinyl chloride was found to be highly dependent on the achiral base used. Thus, the reaction of the readily available sugar derived carbinols, 1 and 2, with methylphenylphosphinyl chloride in the presence of triethylamine yields stereoselectively the corresponding Snp-phosphinates 3Sp and 5Sp in 94 and 92% diastereomeric excess (de). Simply changing the base from triethylamine to pyridine affords Rp-phosphinates 4Rp and 6Rp epimers to 3Sp and 5Sp at the phosphinyl phosphorus in 50 and 40% de respectively. These phosphinate esters were found to be good P-chiral transferring intermediates, they react with Grignard reagents under very mild conditions to give the corresponding phosphine oxides. Both enantiomers Sp- and Rp-o-anisylmethylphenylphosphine oxide (PAMPO) as well Sp- and Rp- methylphenylpropyl phosphine oxide were obained enantiomerically pure in high yields     

Convenient diastereospecific synthesis of a rociverine precursor and its resolution by lipase-catalyzed transesterification

(±)-1-Cyclohexyl-c-2-hydroxymethyl-r-1-cyclohexanol 3, a precursor of the antimuscarinic drug Rociverine 1, was obtained diastereospecifically in very high yield, from the Grignard reaction between C₆H₁₁MgCl and an appropriately protected 2-(hydroxymethyl)cyclohexanone. The preparation of enantiomerically enriched cis diol (+)-(1R,2S)-3 and the corresponding 2-acetoxymethyl derivative (+)-(1S,2R)-12 was achieved by lipase PPL-catalyzed transesterification of racemic diol (±)-3.     

Stereoselective synthesis of (1R,2S)-2-amino-1,3-diols from (R)-cyanohydrins

Vinyl substituted (1R,2S)-amino alcohols 5 were obtained by addition of vinyl magnesium bromide to the corresponding cyanohydrin O-trimethylsilyl ethers (R)-2. The O- and N-protected vinyl amino alcohols 6 were ozonized at −78°C in methanol yielding (1R,2S)-2-amino-1,3-diols7 in high enantiomeric and diastereomeric excesses. For purification, compounds 7 in some cases were acetylated to give the derivatives (1R,2S)-8. Racemic 6a was converted by oxidative ozonolysis at −78°C in methanolic NaOH solution to the corresponding methyl N-acetyl-β-hydroxy propanoate 9a. The configuration of (1R,2S)-8a was confirmed by x-ray crystallographic analysis.     

Preliminary studies on the synthesis of rancinamycins from nitrosugars: first total synthesis of (3S,4S,5S,6R)-5-benzyloxy-6-hydroxy-3,4-(isopropylidendioxy)-cyclohex-1-enecarbaldehyde

The first total synthesis of (3S,4S,5S,6R)-5-benzyloxy-6-hydroxy-3,4-(isopropylidendioxy)-cyclohex-1-enecarbaldehyde from d-glucose is described. The key steps of this synthesis are the stereoselective Michael addition of 2-lithio-1,3-dithiane to 3-O-benzyl-5,6-dideoxy-1,2-O-isopropylidene-6-nitro--d-xilo-hex-5-enofuranose followed by the enantioselective two-step transformation of 3-O-benzyl-5,6-dideoxy-5-C-(1,3-dithian-2-yl)-6-nitro-β-l-idofuranose into (1S,2S,3S,4S,5S,6R)-5-benzyloxy-6-hydroxy-3,4-(isopropylidendioxy)-2-nitro-cyclohexanecarbaldehyde propylene dithioacetal, which was finally converted into the target compound.     

Chiral C2-symmetric 2,3-disubstituted aziridine and 2,6-disubstituted piperidine as chiral ligands in the addition reaction of diethylzinc with arylaldehydes

Chiral C₂-symmetric 2,3-disubstituted aziridines and 2,6-disubstituted piperidines having a β-amino alcohol moiety have been successfully synthesized and their catalytic chiral induction properties have been examined in the asymmetric addition reactions of diethylzinc with arylaldehydes in hexane. When N-(2,2-diphenyl-2-hydroxyethyl)-(S,S)-2,3-bis(methoxymethyl)aziridine 11 was used as a catalytic chiral ligand, sec-alcohols having (S)-configuration formed in high yields of 86–92% but low enantiomeric excesses (ee's) of 11–13%. However, when N-(2,2-diphenyl-2-hydroxyethyl)-(R,R)-2,6-disubstituted piperidine derivatives 16 and 20 were used as the chiral ligands under the same reaction conditions, the ee's of the corresponding sec-alcohols were 20–30 and 5–6%, respectively, along with the inversion of absolute configuration. A plausible mechanism for this inversion is proposed.     

多孔有机笼毛细管电色谱手性柱的制备及应用

多孔有机笼(POCs)是一种新型的具有稳定有序三维空腔结构的多孔材料。通过2-羟基-1,3,5-均苯三甲醛与1R,2R-1,2-二苯基乙二胺发生席夫碱的缩合反应,合成了一种具有羟基功能基团的单一手性POCs材料;将其均匀涂敷在毛细管壁上制成色谱柱,利用电色谱柱成功拆分了二氢黄酮、吡喹酮、萘普生和3,5-二硝基-N-(1-苯乙基)苯甲酰胺4种手性化合物。探究了分离电压、缓冲溶液浓度及其pH值等因素对手性拆分的影响,获得了4种手性物质在POCs色谱柱上的最佳拆分条件。实验研究表明,二氢黄酮、吡喹酮、萘普生和3,5-二硝基-N-(1-苯乙基)苯甲酰胺获得优化分离效果所需的工作电压分别为13、14、14和12 kV;二氢黄酮适宜Tris-H₃PO₄缓冲溶液浓度为0.075 mol/L,吡喹酮、萘普生和3,5-二硝基-N-(1-苯乙基)苯甲酰胺适宜Tris-H₃PO₄缓冲溶液浓度为0.100 mol/L; 4种手性物质得到最佳分离效果时的pH值均为3.51。二氢黄酮、吡喹酮、萘普生和3,5-二硝基-N-(1-苯乙基)苯甲酰胺均达到基线分离,分离度分别为2.99、2.10、2.58和3.59。该POCs色谱柱还成功拆分了o,m,p-碘苯胺、o,m,p-硝基苯胺两种位置异构体。该研究表明POCs手性电色谱柱具有良好的手性识别能力,是一种优秀的手性分离材料,具有很大的电色谱手性分离应用前景。     

A Gibbs free energy correlation for automated docking of carbohydrates

Thermodynamic information can be inferred from static atomic configurations. To model the thermodynamics of carbohydrate binding to proteins accurately, a large binding data set has been assembled from the literature. The data set contains information from 262 unique protein-carbohydrate crystal structures for which experimental binding information is known. Hydrogen atoms were added to the structures and training conformations were generated with the automated docking program AutoDock 3.06, resulting in a training set of 225,920 all-atom conformations. In all, 288 formulations of the AutoDock 3.0 free energy model were trained against the data set, testing each of four alternate methods of computing the van der Waals, solvation, and hydrogen-bonding energetic components. The van der Waals parameters from AutoDock 1 produced the lowest errors, and an entropic model derived from statistical mechanics produced the only models with five physically and statistically significant coefficients. Eight models predict the Gibbs free energy of binding with an error of less than 40% of the error of any similar models previously published.