基于聚(2-甲基-2-■唑啉)和聚丙烯酸的混合刷在毛细管电泳在线富集溶菌酶中的应用

制备了一种对溶菌酶具有可控吸附性能的混合刷涂层毛细管,用于毛细管电泳在线富集溶菌酶以提高其检测灵敏度。首先,分别通过阳离子开环聚合和可逆加成-断裂链转移(RAFT)聚合合成聚(2-甲基-2-■唑啉)(PMOXA)和聚丙烯酸(PAA),然后将甲基丙烯酸缩水甘油酯(GMA)分别与PMOXA和PAA通过自由基共聚和RAFT聚合合成出聚(2-甲基-2-■唑啉)-r-甲基丙烯酸缩水甘油酯(PMOXA-r-GMA)和聚丙烯酸-b-聚甲基丙烯酸缩水甘油酯(PAA-b-PGMA)。将PMOXA-r-GMA和PAA-b-PGMA的混合溶液以一定比例加入到毛细管内,通过加热即可制备出基于PMOXA和PAA的混合刷涂层毛细管。X射线光电子能谱(XPS)对毛细管原材料的表面组成研究结果表明,当混合溶液质量浓度为20 g/L、PMOXA-r-GMA和PAA-b-PGMA质量比为1∶1时,所得涂层中羧基的含量随着PAA链长的增加而增加;异硫氰酸荧光素标记溶菌酶(FITC-溶菌酶)吸附实验结果显示,通过改变环境的pH和离子强度(I)可以调控涂层毛细管对溶菌酶的吸附和释放,在pH 7 (I=10~(-5) mol/L)条件下,毛细管可以吸附大量的溶菌酶,当条件变为pH 3 (I=10~(-1) mol/L)时,吸附的溶菌酶可以被释放出来。将这种具有溶菌酶可控吸附性能的涂层毛细管用于毛细管电泳在线富集溶菌酶,当PAA链长是PMOXA链长的2.2倍时,溶菌酶的灵敏度增强因子为17.69,检出限为8.7×10~(-5) g/L;同一天内对溶菌酶连续测定5次以及连续测定5天,峰面积的日内、日间相对标准偏差(RSD)分别为2.9%和4.1%,迁移时间的日内、日间RSD分别为0.9%和2.1%。涂层的制备只需一步,简单易行,而且涂层具有很好的稳定性。本研究为毛细管电泳分析痕量蛋白质提供了一种简单有效的方法。     

聚(2-甲基-2-噁唑啉)在毛细管电泳分离蛋白质中的应用

毛细管电泳作为一种常见的液相分离技术,因其分析速度快、分离效率高、样品消耗量少等特点,在蛋白质分离分析领域有广泛应用。然而,常用的熔融硅毛细管容易吸附蛋白质,导致电渗流不稳定,分离结果重现性变差;此外,商用毛细管电泳中常用的紫外检测器由于光程短,使得毛细管电泳的检测灵敏度往往不能达到低丰度蛋白质的直接分析要求。因此寻找能够阻止蛋白质吸附、同时能够提高检测灵敏度的涂层是毛细管电泳分离分析蛋白质的重要课题之一。聚（2-甲基-2-噁唑啉）（PMOXA）作为一种类肽类亲水性聚合物,具有与抗蛋白质吸附聚合物聚乙二醇类似的亲水性、抗蛋白质吸附性和生物相容性,而且其类肽结构使之具有较聚乙二醇更好的稳定性,因此近年来在生物质传递、药物载体和阻抗蛋白质吸附等领域得到越来越多的应用。该文主要从两个方面对聚（2-甲基-2-噁唑啉）在毛细管电泳中的应用进行了阐述。一是利用多巴胺作为黏合层将其涂覆在毛细管内壁作为抗蛋白质吸附涂层,这种涂层不仅能成功分离多种蛋白质的混合物（如溶菌酶、细胞色素C、核糖核酸酶A和α-胰凝乳蛋白酶原A）,而且在定量检测奶粉中三聚氰胺、乳铁蛋白的过程中,能阻抗其他蛋白质的非特异性吸附,提高了毛细管电泳对奶粉中三聚氰胺、乳铁蛋白的检测效率。二是将其与具有刺激响应性的聚合物（如聚丙烯酸）构成二元混合刷涂层,在一定的pH和离子强度条件下,涂层可吸附目标蛋白质（如牛血清白蛋白、溶菌酶）,在另一pH和离子强度条件下可将吸附的目标蛋白质全部释放,同时在释放过程中,处于涂层表面的聚（2-甲基-2-噁唑啉）会进一步阻止蛋白质的吸附,释放的蛋白质在电渗流和电泳的双重作用下快速迁移,到达检测器的蛋白质瞬时浓度大大增加,使目标蛋白质得到富集,目标蛋白质的检测信号得到放大,从而达到了提高低丰度蛋白质检测灵敏度的目的。此外,该文还对聚（2-甲基-2-噁唑啉）在毛细管电泳分离蛋白质中的未来发展趋势进行了展望。     

纤维蛋白在聚(2-甲基-2-噁唑啉)/聚丙烯酸混合聚合物刷上的吸附-脱附行为

以聚多巴胺(PDA)为黏结剂,在硅、玻璃和金的表面制备了由具有抗蛋白质吸附功能的聚(2-甲基-2-噁唑啉)(PMOXA)和具有刺激响应性的聚丙烯酸(PAA)组成的混合聚合物刷.通过X-射线光电子能谱(XPS)、可变角光谱椭偏仪(VASE)对其进行了表征,并利用水接触角(WCA)研究了聚合物刷表面的亲/疏水性.选取pH?...     

流动注射电化学发光测定动物饲料中6-丙基-2-硫脲嘧啶含量的研究

基于6-丙基-2-硫脲嘧啶（PTU）对三联吡啶钌(Ru（bpy）₃²⁺)电化学发光（ECL）有强烈的增敏作用,建立了流动注射电化学发光（FI-ECL）检测PTU的新方法。通过考察影响体系电化学发光的因素(如电压信号类型及电位、缓冲溶液pH值、载液流速及Ru（bPY）₃²⁺浓度等),得到FI-ECL测定PTU的最佳条件,并提出了可能的反应机理。研究结果表明,在0.1 mol/L pH 12.0的H₃PO₄-NaOH缓冲介质中,控制恒电位为+1.50 V,Ru（bpy）₃²⁺浓度为1.0×10^-4mol/L,载液流速为1.5 mL/min,PTU对Ru（bpy）₃²⁺的电化学发光具有最大的增敏作用。在此条件下,测得PTU的线性范围为2.0×10^-71.0×10^-4mol/L（r²=0.998 6）,检出限（S/N=3）为1.3×10^-8mol/L,对7份浓度均为1.0×10^-6mol/L的PTU标准溶液进行测定,所得结果的相对标准偏差为1.2%。该方法简便、快速、灵敏,用于模拟动物饲料中PTU含量的检测,结果满意。     

铋(Ⅲ)-8-羟基喹啉-5-磺酸的吸附伏安法研究

探讨了8-羟基喹啉-5-磺酸(HQSA)和络合物Bi(Ⅲ)-HQSA的电化学性质,特别是它们在汞电极上的吸附性。在pH=7.0的磷酸盐底液中,Bi(Ⅲ)-HQSA有一灵敏还原峰,为反应物弱吸附,E_pc=-0.44V(vs.饱和Ag/AgCl)。据此建立了吸附伏安法测定铋的新方法,检测限为2.0×10^-9mol/L,线性范围5.0×10^-9～1.0×10^-6mol/L。     

聚(2-甲基-2-■唑啉)在毛细管电泳分离蛋白质中的应用

毛细管电泳作为一种常见的液相分离技术,因其分析速度快、分离效率高、样品消耗量少等特点,在蛋白质分离分析领域有广泛应用。然而,常用的熔融硅毛细管容易吸附蛋白质,导致电渗流不稳定,分离结果重现性变差;此外,商用毛细管电泳中常用的紫外检测器由于光程短,使得毛细管电泳的检测灵敏度往往不能达到低丰度蛋白质的直接分析要求。因此寻找能够阻止蛋白质吸附、同时能够提高检测灵敏度的涂层是毛细管电泳分离分析蛋白质的重要课题之一。聚(2-甲基-2-■唑啉)(PMOXA)作为一种类肽类亲水性聚合物,具有与抗蛋白质吸附聚合物聚乙二醇类似的亲水性、抗蛋白质吸附性和生物相容性,而且其类肽结构使之具有较聚乙二醇更好的稳定性,因此近年来在生物质传递、药物载体和阻抗蛋白质吸附等领域得到越来越多的应用。该文主要从两个方面对聚(2-甲基-2-■唑啉)在毛细管电泳中的应用进行了阐述。一是利用多巴胺作为黏合层将其涂覆在毛细管内壁作为抗蛋白质吸附涂层,这种涂层不仅能成功分离多种蛋白质的混合物(如溶菌酶、细胞色素C、核糖核酸酶A和α-胰凝乳蛋白酶原A),而且在定量检测奶粉中三聚氰胺、乳铁蛋白的过程中,能阻抗其他蛋白质的非特异性吸附,提高了毛细管电泳对奶粉中三聚氰胺、乳铁蛋白的检测效率。二是将其与具有刺激响应性的聚合物(如聚丙烯酸)构成二元混合刷涂层,在一定的pH和离子强度条件下,涂层可吸附目标蛋白质(如牛血清白蛋白、溶菌酶),在另一pH和离子强度条件下可将吸附的目标蛋白质全部释放,同时在释放过程中,处于涂层表面的聚(2-甲基-2-■唑啉)会进一步阻止蛋白质的吸附,释放的蛋白质在电渗流和电泳的双重作用下快速迁移,到达检测器的蛋白质瞬时浓度大大增加,使目标蛋白质得到富集,目标蛋白质的检测信号得到放大,从而达到了提高低丰度蛋白质检测灵敏度的目的。此外,该文还对聚(2-甲基-2-■唑啉)在毛细管电泳分离蛋白质中的未来发展趋势进行了展望。     

基于分子印迹聚合物的SPR传感器用于牛血清蛋白的检测

以牛血清蛋白（BSA）为模板分子、多巴胺为功能单体和交联剂、高碘酸钠为氧化剂，制备了BSA表面印迹表面等离子共振（SPR）生物传感器。通过聚丙烯酸（PAA）与BSA的氢键作用预先固定BSA，增加印迹效率，同时在聚多巴胺表面非印迹区域修饰部分水解的聚（2-甲基-2-噁唑啉）（PMOXA-EI）抵抗蛋白质的非特异性吸附。通过X射线光电子能谱、原子力显微镜、可变角光谱椭偏仪和静态水接触角对制备的BSA表面印迹SPR生物传感器进行表征。对质量浓度为0.1～10μg/mL的BSA水溶液进行SPR吸附研究，检测限和定量限分别达到了53 ng/mL和161 ng/mL。以β-乳球蛋白、卵白蛋白、溶菌酶和细胞色素C为参比蛋白进行选择性研究，相应的选择性系数分别达到了4.43、3.45、3.17和3.64。上述5种蛋白混合溶液中BSA的检测回收率为97.5%～102.5%。     

镓-水杨基荧光酮伏安络合吸附波的研究

在pH为3.0的0.2mol/L邻苯二甲酸氢钾-HCI和5.0×10^-6mol/L水杨基荧光酮底液中,线性扫描可得灵敏的Ga-SAF络合物吸附波,峰电位为-0.93V(vsSCE).镓在7.5×10^-9～3.8×10^-7mol/L浓度范围内与峰高成正比关系.     

非离子聚(N-乙烯基-2-吡咯烷酮)凝胶在线型聚(丙烯酸)溶液中的溶胀特性

研究了在线型聚 (丙烯酸 ) (PAA)溶液中链长、pH、离子强度和水 /二甲亚砜混合溶剂组成对非离子聚 (N-乙烯基 - 2 -吡咯烷酮 ) (PVP)水凝胶溶胀特性的影响 .发现聚酸浓度的变化引起凝胶显著的体积相变 ,这是因为凝胶和聚合物通过氢键形成了大分子间凝胶 -聚合物复合物 .凝胶的溶胀特性取决于聚酸的链长而不是离子强度 .随着pH值和水 /二甲亚砜混合溶剂组成的变化 ,凝胶的溶胀率 (SR)发生变化     

Ni2+-胆红素和Ni2+-2,2'联吡啶-胆红素的单扫描极谱研究

本文研究了Ni²⁺-胆红素和Ni²⁺-2,2'联吡啶-胆红素在微碱性介质中的单扫描极谱行为和电极反应机理.在Ni²⁺-胆红素体系中.于-1.0V处产生络合物的催化前波;而在Ni²⁺-2,2'联吡啶-胆红素体系中,则于-1.5V处产生催化氢波.这2个体系的线性范围分别为1×10^-6～5×10^-6mol/L和2×10^-7～8×10^-6mol/L.     

PMOXA/PAA Brushes toward on-Line Preconcentration for BSA in Capillary Electrophoresis

In this work, a binary-mixed-brushes-coated (BBC) capillary with switchable protein adsorption/desorption properties was developed and applied for on-line preconcentration of proteins. Firstly, amine-terminated poly(2-methyl-2-oxazoline) (PMOXA-NH₂) and thiolterminated poly(acrylic acid) (PAA-SH) were synthesized by using cationic ring-opening polymerization (CROP) and reversible addition fragmentation chain transfer (RAFT) polymerization, respectively. Then, the BBC capillary based on poly(2-methyl-2-oxazoline) (PMOXA) and poly(acrylic acid) (PAA) was prepared by sequentially grafting of PMOXA-NH₂ and PAA-SH onto fused-silica capillary inner surface through poly(dopamine) (PDA) as an anchor. The obtained PMOXA/PAA coating formed on the capillary or capillary's raw material was characterized in terms of the thickness, surface chemical composition by using scanning electron microscope (SEM) and X-ray photoelectron spectrum (XPS). The switchable protein adsorption/desorption performance of the BBC capillary was investigated by using fluorescence microscope under di erent solutions with certain pH and ionic strength(I). The results showed that bovine serum albumin (BSA) could be adsorbed on BBC capillary at pH=5.0 (I=10^-5 mol/L), and then the adsorbed BSA could be released at pH=9.0 (I=0.1 mol/L). This switchable protein adsorption/desorption property of coated capillary was then used to preconcentrate proteins on-line for increasing the detection sensitivity of BSA in capillary electrophoresis (CE). With this method, a sensitivity enhancement factor (SEF) more than 5000 for BSA detection was obtained.     

The preparation of a novel polydopamine-graft-poly(2-methyl-2-oxazoline) protein-resistant coating and its applications in protein separation

A novel polydopamine-graft-poly(2-methyl-2-oxazoline)(PDA-g-PMOXA) coating was prepared by immobilizing poly(2-methyl-2-oxazoline)(PMOXA) onto material surfaces through polydopamine (PDA) anchored coating for the first time.And then,the chemical composition,hydrophilicity,and protein-resistant properties of the PDA-g-PMOXA coating were studied using X-ray photoelectron spectroscopy(XPS),contact angel(CA) test,surface plasmon resonance(SPR),and quartz crystal microbalance with dissipation(QCM-D) measurement.Finally,the coating was applied to the capillary inner surface for protein separation by capillary electrophoresis(CE).     

Preparation and properties of poly(alkyl vinyl ether-2-ethyl-2-oxazoline) diblock copolymers

A method for the synthesis of well-defined poly(alkyl vinyl ether–2-ethyl-2-oxazoline) diblock copolymers with hydrolytically stable block linkages has been developed. Monofunctional poly(alkyl vinyl ether) oligomers with nearly Poisson molecular weight distributions were prepared via a living cationic polymerization method using chloroethyl vinyl ether together with HI/ZnI₂ as the initiating system and lithium borohydride as the termination reagent. Using the resultant chloroethyl ether functional oligomers in combination with sodium iodide as macroinitiators, 2-ethyl-2-oxazoline was polymerized in chlorobenzene/NMP to afford diblock copolymers. A series of poly(methyl vinyl ether–2-ethyl-2-oxazoline) diblock materials were found to have polydispersities of ≈ 1.3–1.4 and are microphase separated as indicated by two T_g's in their DSC thermograms. These copolymers are presently being used as model materials to study fundamental parameters important for steric stabilization of dispersions in polar media. © 1993 John Wiley & Sons, Inc.     

基于场放大进样和石墨烯量子点双重富集毛细管电泳分离检测三聚氰胺和双氰胺

通过热解法制备了硫掺杂的石墨烯量子点(S-GQDs),同石墨烯量子点(GQDs)相比,S原子的引入有效改善了GQDs的表面状态和化学特性、增强其对正电荷的捕获能力,使其更易与阳离子相互作用.以S-GQDs为载体,结合电堆积富集技术,发展了一种基于场放大进样(FASI)和S-GQDs放大的双重富集毛细管电泳(CE)分离检...     

Latices of poly(fluoroalkyl mathacrylate)‐b‐poly(butyl methacrylate) copolymers prepared via reversible addition–fragmentation chain transfer polymerization

Poly(fluoroalkyl mathacrylate)‐block‐poly(butyl methacrylate) diblock copolymer latices were synthesized by a two‐step process. In the first step, a homopolymer end‐capped with a dithiobenzoyl group [poly(fluoroalkyl mathacrylate) (PFAMA) or poly(butyl methacrylate) (PBMA)] was prepared in bulk via reversible addition–fragmentation chain transfer (RAFT) polymerization with 2‐cyanoprop‐2‐yl dithiobenzoate as a RAFT agent. In the second step, the homopolymer chain‐transfer agent (macro‐CTA) was dissolved in the second monomer, mixed with a water phase containing a surfactant, and then ultrasonicated to form a miniemulsion. Subsequently, the RAFT‐mediated miniemulsion polymerization of the second monomer (butyl methacrylate or fluoroalkyl mathacrylate) was carried out in the presence of the first block macro‐CTA. The influence of the polymerization sequence of the two kinds of monomers on the colloidal stability and molecular weight distribution was investigated. Gel permeation chromatography analyses and particle size results indicated that using the PFAMA macro‐CTA as the first block was better than using the PBMA RAFT agent with respect to the colloidal stability and the narrow molecular weight distribution of the F‐copolymer latices. The F‐copolymers were characterized with ¹H NMR, ¹⁹F NMR, and Fourier transform infrared spectroscopy. Comparing the contact angle of a water droplet on a thin film formed by the fluorinated copolymer with that of PBMA, we found that for the diblock copolymers containing a fluorinated block, the surface energy decreased greatly, and the hydrophobicity increased. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 471–484, 2007     

Reversible Protein Adsorption on PMOXA/PAA Based Coatings: Role of PAA

In this study we report design of stimuli-responsive coating based on poly(2-methyl-2-oxazoline-random-glycidyl methacrylate)(PMOXA-r-GMA) comb copolymer and poly(acrylic acid)-block-poly(glycidyl methacrylate)(PAA-b-PGMA) block copolymers and scrutinize its ability to control protein adsorption. Firstly, PMOXA/PAA based coatings were prepared by simply spin coating the mixture of PMOXA-r-GMA and PAA-b-PGMA copolymer solutions onto silicon substrates followed by annealing at 110 °C.Then coatings were rigorously characterized by X-ray photoelectron spectroscopy(XPS), the static water contact angle(WCA) test,ellipsometry and atomic force microscopy(AFM). After that, the relationship of switchable behavior of PMOXA/PAA based coatings with PAA content and chain length was investigated through the change of thickness and WCA upon pH and ionic strength(I) trigger,which indicated that the change in thickness and WCA was triggered when PAA contents were increased as well as by increasing chain length of PAA in PMOXA/PAA based coatings. Finally, real-time adsorption/desorption of lysozyme(Lyso) on PMOXA/PAA based coatings was monitored using quartz crystal microbalance with dissipation monitoring(QCM-D). The results showed that the Lyso adsorption amount was increased upon increasing chain length and contents of PAA in PMOXA/PAA based coatings. The adsorbed Lyso was then efficiently desorbed by changing pH and I of medium with the maximum desorption( 90% desorption percentage) observed for the suitable ratio of PMOXA and PAA while chain length of PAA was kept longer than that of PMOXA. Furthermore, the prepared coatings were found to repeatedly adsorb and desorb Lyso for four successive cycles of adsorption/desorption, which confirmed the stability of prepared coatings.     

Determination of pepsin by capillary electrophoresis using mixed polymer coated capillary with switchable properties toward protein adsorption/desorption

In this work, a simple online preconcentration method for quantitative detection of pepsin was realized by using the binary mixed polymer brushes coated capillary with switchable properties toward protein adsorption. Firstly, the binary mixed polymer brushes were prepared by grafting poly(2-methyl-2-oxazoline) and poly(4-vinylpyridine) onto the inner wall of the capillary through a polydopamine anchor. Then the coatings were characterized by X-ray photoelectron spectrometer and electroosmotic flow measurement. The results indicated that the composition of coating could be controlled by varying the feed ratio of poly(2-methyl-2-oxazoline) to poly(4-vinylpyridine) and the inner surface charge could be tuned toward the change of pH and ionic strength. The results showed that when the poly(2-methyl-2-oxazoline)/poly(4-vinylpyridine) mass ratio was 80/20, the highest online preconcentration effect was obtained and the sensitivity enhancement factor was 6.3. Moreover, satisfactory sensitivity (limit of detection: 7.5 ng/mL) and good repeatability were obtained with the online preconcentration method. The polymer-coated capillary was still stable for online preconcentration and detection of pepsin after 50 consecutive runs. Last, the proposed method was used successfully to online preconcentrate pepsin in the saliva matrix.     

Synthesis and characterization of amphiphilic copolymer of linear poly(ethylene oxide) linked with [poly(styrene‐co‐2‐hydroxyethyl methacrylate)‐graft‐poly(ε‐caprolactone)] using sequential controlled polymerization

A well‐defined amphiphilic copolymer of ‐poly(ethylene oxide) (PEO) linked with comb‐shaped [poly(styrene‐co‐2‐hydeoxyethyl methacrylate)‐graft‐poly(ε‐caprolactone)] (PEO‐b‐P(St‐co‐HEMA)‐g‐PCL) was successfully synthesized by combination of reversible addition‐fragmentation chain transfer polymerization (RAFT) with ring‐opening anionic polymerization and coordination–insertion ring‐opening polymerization (ROP). The α‐methoxy poly(ethylene oxide) (mPEO) with ω,3‐benzylsulfanylthiocarbonylsufanylpropionic acid (BSPA) end group (mPEO‐BSPA) was prepared by the reaction of mPEO with 3‐benzylsulfanylthiocarbonylsufanyl propionic acid chloride (BSPAC), and the reaction efficiency was close to 100%; then the mPEO‐BSPA was used as a macro‐RAFT agent for the copolymerization of styrene (St) and 2‐hydroxyethyl methacrylate (HEMA) using 2,2‐azobisisobutyronitrile as initiator. The molecular weight of copolymer PEO‐b‐P(St‐co‐HEMA) increased with the monomer conversion, but the molecular weight distribution was a little wide. The influence of molecular weight of macro‐RAFT agent on the polymerization procedure was discussed. The ROP of ε‐caprolactone was then completed by initiation of hydroxyl groups of the PEO‐b‐P(St‐co‐HEMA) precursors in the presence of stannous octoate (Sn(Oct)₂). Thus, the amphiphilic copolymer of linear PEO linked with comb‐like P(St‐co‐HEMA)‐g‐PCL was obtained. The final and intermediate products were characterized in detail by NMR, GPC, and UV. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 467–476, 2006     

First aldehyde-functionalized poly(2-oxazoline)s for chemoselective ligation

A protected aldehyde-functionalized 2-oxazoline, 2-[3-(1,3)-dioxolan-2-ylpropyl]-2-oxazoline (DPOx), was synthesized from commercially available compounds in high yields. The polymerization of DPOx with different initiators proceeds via a living ionic mechanism; thus, the polymers were of low polydispersity and the degree of polymerization could be precisely adjusted. Copolymerization with 2-methyl-2-oxazoline gave water-soluble statistical copolymers. Hydrolysis of the homo- and copolymers resulted in well-defined, aldehyde-bearing poly(2-oxazoline)s. The aldehyde side functions reacted quantitatively with an amino-oxy compound to form the corresponding oxime.