Application of N-(ω-bromoalkyl)tetrazoles for the preparation of bitopic ligands containing pyridylazole chelators or azole rings as building blocks for iron(II) spin crossover polymeric materials

1-(3-Bromopropyl)tetrazole, 2-(3-bromopropyl)tetrazole, 1-(4-bromobutyl)tetrazole, and 2-(4-bromobutyl)tetrazole were synthesized with the aim to prepare flexible bitopic ligands contaning 1- or 2-substituted tetrazole ring linked through 1,3-propylene or 1,4-butylene spacer with pyridylazole or azole unit. Twenty-six novel ligands i.e., α-(pyridylazolyl)-ω-(tetrazolyl)alkanes, α-(tetrazolyl)-ω-(1,2,3-triazolyl)alkanes, and α-(tetrazol-1-yl)-ω-(tetrazol-2-yl)alkanes were prepared by an alkylation of sodium salts of 5-(2-pyridyl)tetrazole, 3-(2-pyridyl)-1,2,4-triazole, 3-(2-pyridyl)pyrazole, 1,2,3-triazole, and 1,2,3,4-tetrazole with N-(ω-bromoalkyl)tetrazoles. An alkylation of 5-(2-pyridyl)tetrazole, 1,2,3,4-tetrazole, and 1,2,3-triazole afforded both N1- and N2-regioisomer whereas in the case of 3-(2-pyridyl)-1,2,4-triazole and 3-(2-pyridyl)pyrazole only N1 isomers were isolated. The positions of alkylation were confirmed by X-ray diffraction studies of 1-(5-(2-pyridyl)tetrazol-2-yl)-4-(tetrazol-1-yl)butane, 1-(3-(2-pyridyl)-1,2,4-triazol-1-yl)-4-(tetrazol-2-yl)butane, 1-(3-(2-pyridyl)pyrazol-1-yl)-4-(tetrazol-1-yl)butane, and 1-(tetrazol-1-yl)-4-(1,2,3-triazol-1-yl)butane. Preliminary investigations of magnetic properties of iron(II) complex with 1-(3-(2-pyridyl)-1,2,4-triazol-1-yl)-4-(tetrazol-1-yl)butane revealed that obtained product exhibit thermally induced spin transition accompanied by the thermochromic effect.     

Cyclodextrin complexation of a stilbene and the self-assembly of a simple molecular device

(E)-4-tert-Butyl-4'-oxystilbene, 1(-), is thermally stable as the (E)-1(-) isomer but may be photoisomerized to the (Z)-1(-) isomer as shown by UV-vis and (1)H NMR studies in aqueous solution. When (E)-1(-) is complexed by alphaCD two inclusion isomers (includomers) form in which alphaCD assumes either of the two possible orientations about the axis of (E)-1(-) in alphaCD.(E)-1(-) for which (1)H NMR studies yield the parameters: k(1)(298 K)= 12.3 +/- 0.6 s(-1), DeltaH(1)(++)= 94.3 +/- 4.7 kJ mol(-1), DeltaS1(++)= 92.0 +/- 5.0 J K(-1) mol(-1), and k(2)(298 K)= 10.7 +/- 0.5 s(-1), DeltaH(2)(++)= 93.1 +/- 4.7 kJ mol(-1), DeltaS2(++)= 87.3 +/- 5.0 J K(-1) mol(-1) for the minor and major includomers, respectively. The betaCD.(E)-1(-) complex either forms a single includomer or its includomers interchange at the fast exchange limit of the (1)H NMR timescale. Complexation of 1(-) by N-(6(A)-deoxy- alpha-cyclodextrin-6(A)-yl)-N'-(6(A)-deoxy- beta-cyclodextrin-6(A)-yl)urea, results in the binary complexes 2.(E)-1(-) in which both CD component annuli are occupied by (E)-1(-) and which exists exclusively in darkness and 2.(Z)-1(-) in which only one CD component is occupied by (Z)-1(-) and exists exclusively in daylight at lambda > or = 300 nm. Irradiation of solutions of the binary complexes at 300 and 355 nm results in photostationary states dominated by 2.(E)-1(-) and 2.(Z)-1(-), respectively. In the presence of 4-methylbenzoate, 4(-), 2.(Z)-1(-) forms the ternary complex 2.(Z)-1(-).4(-) where 4(-) occupies the second CD annulus. Interconversion occurs between 2.(Z)-1(-).4(-) and 2.(E)-1(-)+4(-) under the same conditions as for the binary complexes alone. Similar interactions occur in the presence of 4-methylphenolate and 4-methylphenylsulfonate. The two isomers of each of these systems represent different states of a molecular device, as do the analogous binary complexes of N,N-bis(6(A)-deoxy- beta-cyclodextrin-6(A)-yl)urea, 3, [3.(E)-1(-) and 3.(Z)-1(-), where the latter also forms a ternary complex with 4(-).     

Mechanism of CO exchange on cis-[M(CO)2X2]- complexes (M=Rh,Ir;X=Cl, Br, or I)

The CO exchange on cis-[M(CO)2X2]- with M = Ir (X = Cl, la; X = Br, 1b; X = I, 1c) and M = Rh (X = Cl, 2a; X = Br, 2b; X = I, 2c) was studied in dichloromethane. The exchange reaction [cis-[M(CO)2X2]- + 2*CO is in equilibrium cis-[M(*CO)2X2]- + 2CO (exchange rate constant: kobs)] was followed as a function of temperature and carbon monoxide concentration (up to 6 MPa) using homemade high gas pressure NMR sapphire tubes. The reaction is first order for both CO and cis-[M(CO)2X2]- concentrations. The second-order rate constant, k2(298) (=kobs)[CO]), the enthalpy, deltaH*, and the entropy of activation, deltaS*, obtained for the six complexes are respectively as follows: la, (1.08 +/- 0.01) x 10(3) L mol(-1) s(-1), 15.37 +/- 0.3 kJ mol(-1), -135.3 +/- 1 J mol(-1) K(-1); 1b, (12.7 +/- 0.2) x 10(3) L mol(-1) s(-1), 13.26 +/- 0.5 kJ mol(-1), -121.9 +/- 2 J mol(-1) K(-1); 1c, (98.9 +/- 1.4) x 10(3) L mol(-1) s(-1), 12.50 +/- 0.6 kJ mol(-1), -107.4 +/- 2 J mol(-1) K(-1); 2a, (1.62 +/- 0.02) x 10(3) L mol(-1) s(-1), 17.47 +/- 0.4 kJ mol(-1), -124.9 +/- 1 J mol(-1) K(-1); 2b, (24.8 +/- 0.2) x 10(3) L mol(-1) s(-1), 11.35 +/- 0.4 kJ mol(-1), -122.7 +/- 1 J mol(-1) K(-1); 2c, (850 +/- 120) x 10(3) L mol(-1), s(-1), 9.87 +/- 0.8 kJ mol(-1), -98.3 +/- 4 J mol(-1) K(-1). For complexes la and 2a, the volumes of activation were measured and are -20.9 +/- 1.2 cm3 mol(-1) (332.0 K) and -17.2 +/- 1.0 cm3 mol(-1) (330.8 K), respectively. The second-order kinetics and the large negative values of the entropies and volumes of activation point to a limiting associative, A, exchange mechanism. The reactivity of CO exchange follows the increasing trans effect of the halogens (Cl < Br < I), and this is observed on both metal centers. For the same halogen, the rhodium complex is more reactive than the iridium complex. This reactivity difference between rhodium and iridium is less marked for chloride (1.5: 1) than for iodide (8.6:1) at 298 K.     

C- and O-Alkylation with α-Haloketones of the Adamantane Series

Reactions of 1-adamantyl bromomethyl ketone and 1-(1-adamantyl)-3-bromo-2-propanone with acetylacetone and ethyl acetoacetate in a mixture of dry diethyl ether with anhydrous methanol in the presence of sodium methoxide afforded 3-(1-adamantylcarbonylmethyl)-2,4-pentanedione, ethyl 2-(1-adamantylcarbonylmethyl)-3-oxobutanoate, 4-acetyl-1-(1-adamantyl)-2,5-hexanedione, and ethyl 2-acetyl-5-(1-adamantyl)-4-oxopentanoate. The Knoevenagel-Cope reactions of 1-adamantyl bromomethyl ketone and 1-(1-adamantyl)-3-bromo-2-propanone with diethyl malonate yielded, respectively, diethyl 1-(1-adamantyl)-2-bromoethylidenemalonate and diethyl 1-(1-adamantylmethyl)-2-bromoethylidenemalonate. O-Alkylation of ethyl acetoacetate with 1-adamantyl bromomethyl ketone gave ethyl 3-(1-adamantylcarbonylmethoxy)-2-butenoate. Carboxylic acids reacted with 1-adamantyl bromomethyl ketone to form the corresponding 2-(1-adamantyl)-2-oxoethyl carboxylates.     

Optically active antifungal azoles. XI. An alternative synthetic route for 1

New routes for the synthesis of the optically active antifungal triazoles 1-[(1R,2R)-2-(2,4-difluorophenyl)-2-hydroxy-1-methyl-3-(1H-1,2,4-triazol-1-yl)propyl]-3-[4-(1H-1-tetrazolyl)phenyl]-2-imidazolidinone (1b) and the 3-14-(1H-1,2,3-triazol-1-yl)phenyl]-2-imidazolidinone analog (1a) that possess an imidazolidine nucleus were established. The key synthetic intermediates, (2R,3R)-3-(2,2-diethoxvethyl)amino-2-(2,4-difluorophenyl)-1-(1H1,2,4-triazol-1-yl)-2-butanol (8) and (2R,3R)-2-(2,4-difiuorophenyl)-3-(2-h ydroxyethyl)amino-1-(1H-1,2,4-triazol-1-yl)-2-butanol (14), were prepared by the ring-opening reaction of the oxirane (2) with the corresponding 2-substituted ethylamines. The acetal (8) was converted to the imidazolidinones (1a, b) by condensation with the carbamates (10a, b) followed by treatment with hydrochloric acid and subsequent catalytic hydrogenation. The candidate selected for the clinical trials, 1b (TAK-456), was alternatively prepared from the hydroxyethylamino intermediate (14) via two reaction steps: condensation with the carbamate (10b) to the urea (15) and subsequent cyclization to the imidazolidinones. This newly developed synthetic route could be applied to a large scale preparation of 1b.     

Five new nortropane alkaloids and six new amino acids from the fruit of Morus alba LINNE growing in Turkey

Investigation of the constituents of the fruits of Morus alba LINNE (Moraceae) afforded five new nortropane alkaloids (1-5) along with nor-psi-tropine (6) and six new amino acids, morusimic acids A-F (7-12). The structures of the new compounds were determined to be 2alpha,3beta-dihydroxynortropane (1), 2beta,3beta-dihydroxynortropane (2), 2alpha,3beta,6exo-trihydroxynortropane (3), 2alpha,3beta,4alpha-rihydroxynortropane (4), 3beta,6exo-dihydroxynortropane (5), (3R)-3-hydroxy-12-[(1S,4S)-4-[(1S)-1-hydroxyethyl]-pyrrolidin-1-yll-dodecanoic acid-3-O-beta-D-glucopyranoside (7), (3R)-3-hydroxy-12-[(1S,4S)-4-[(1S)-1-hydroxyethyl]-pyrrolidin-1-yll-dodecanoic acid (8), (3R)-3-hydroxy-12-1(1R,4R,5S)-4-hydroxy-5-methyl-piperidin-1-yll-dodecanoic acid-3-O-beta-D-glucopyranoside (9), (3R)-3-hydroxy-12-[(1R,4R,5S)-4-hydroxy-5-methyl-piperidin-1-yll-dodecanoic acid (10), (3R)-3-hydroxy-12-[(1R,4R,5S)-4-hydroxy-5-hydroxymethyl-piperidin-1-yl]-dodecanoic acid-3-O-beta-D-glucopyranoside (11), and (3R)-3-hydroxy-12-[(1R,4S,5S)-4-hydroxy-5-methyl-piperidin-1-yl]-dodecanoic acid (12) on the basis of spectral and chemical data.     

Complete 1H and 13C NMR assignments of six saponins from Sapindus trifoliatus

Complete 1H and 13C spectral assignments are reported for six saponins from the pericarp of Sapindus trifoliatus (Hindi name: Reetha) collected from Madhya Pradesh and Maharashtra, India, using only 1D and 2D NMR methods. The structures of the compounds were elucidated as hederagenin 3-O-(3-O-acetyl-beta-D-xylopyranosyl)-(1-3)-alpha-L-rhamnopyranosyl-(1-2)-alpha-L-ara-binopyranoside, hederagenin 3-O-(4-O-acetyl-beta-D-xylop-yranosyl)-(1-3)-alpha-L-rhamnopyranosyl-(1-2)-alpha-L-arabinop-yranoside, hederagenin 3-O-(3,4-O-diacetyl-beta-D-xylopy-ranosyl)-(1-3)-alpha-L-rhamnopyranosyl-(1-2)-alpha-L-arabinopy-ranoside, hederagenin 3-O-(3,4-O-diacetyl-alpha-L-arabinop-yranosyl)-(1-3)-alpha-L-rhamnopyranosyl-(1-2)-alpha-L-arabinop-yranoside, hederagenin 3-O-(beta-D-xylopyranosyl)-(1-3)-alpha-L-rhamnopyranosyl-(1-2)-alpha-L-arabinopyranoside and he-deragenin 3-O-(alpha-L-arabinopyranosyl)-(1-3)-alpha-L-rhamno-pyranosyl-(1-2)-alpha-L-arabinopyranoside. It is concluded that saponins of this complexity approach the limit of structural complexity, which can be solved by NMR alone, precisely and quickly.     

Syntheses of Heterocycles from the Sodium Salts of 3-(1-Adamantyl)-1-hydroxy-1-propen-3-one and 4-(1-Adamantyl)-1-hydroxy-1-buten-3-one

The interaction of the sodium salts of 3-(1-adamantyl)-1-hydroxy-1-propen-3-one and 4-(1-adamantyl)-1-hydroxy-1-buten-3-one with hydroxylamine, hydrazine, and guanidine leads to the synthesis of 5-(1-adamantyl)-5-hydroxy- and 5-(1-adamantylmethyl)-5-hydroxy-2-isoxazolines, 3-(1-adamantyl)- and 3-(1-adamantylmethyl)pyrazoles, 3-(1-adamantyl)-2-phenylpyrazole, and 4-(1-adamantyl)-2-amino- and 4-(1-adamantylmethyl)-2-aminopyrimidines.     

1-(2-Mercaptoethyl)phthalazines and related compounds

1-(2-Mercaptoethyl)phthalazine (VII) and its analogs such as S-2-(1-phthalazyl)ethyliso-thiuronium bromide (VI), sodium S-2-(1-phthalazyl)ethylthiosulfate (VIII), 1,3-bis-acetylthio-2-(1-phthalazyl)propane (XII), 2-(1-phthalazyl)-1,3-propanedithiol (XIII), disodium 2-(1-phthalazyl)-1,3-propanedithiosulfate (XIV), 3-dimethylamino-2-(1-phthalazyl)-1-propanethiol (XVII) and 3-(4-methyl-1-piperazinyl)-2-(1-phthalazyl)-1-propanethiol (XIX) have been prepared as potential radiation protection agents.     

Hydroxylation of phenolic compounds by a peroxodicopper(II) complex: further insight into the mechanism of tyrosinase

The dicopper(I) complex [Cu2(MeL66)]2+ (where MeL66 is the hexadentate ligand 3,5-bis-{bis-[2-(1-methyl-1H-benzimidazol-2-yl)-ethyl]-amino}-meth ylbenzene) reacts reversibly with dioxygen at low temperature to form a mu-peroxo adduct. Kinetic studies of O2 binding carried out in acetone in the temperature range from -80 to -55 degrees C yielded the activation parameters DeltaH1(not equal) = 40.4 +/- 2.2 kJ mol(-1), DeltaS1)(not equal) = -41.4 +/- 10.8 J K(-1) mol(-1) and DeltaH(-1)(not equal) = 72.5 +/- 2.4 kJ mol(-1), DeltaS(-1)(not equal) = 46.7 +/- 11.1 J K(-1) mol(-1) for the forward and reverse reaction, respectively, and the binding parameters of O2 DeltaH degrees = -32.2 +/- 2.2 kJ mol(-1) and DeltaS degrees = -88.1 +/- 10.7 J K(-1) mol(-1). The hydroxylation of a series of p-substituted phenolate salts by [Cu2(MeL66)O2]2+ studied in acetone at -55 degrees C indicates that the reaction occurs with an electrophilic aromatic substitution mechanism, with a Hammett constant rho = -1.84. The temperature dependence of the phenol hydroxylation was studied between -84 and -70 degrees C for a range of sodium p-cyanophenolate concentrations. The rate plots were hyperbolic and enabled to derive the activation parameters for the monophenolase reaction DeltaH(not equal)ox = 29.1 +/- 3.0 kJ mol(-1), DeltaS(not equal)ox = -115 +/- 15 J K(-1) mol(-1), and the binding parameters of the phenolate to the mu-peroxo species DeltaH degrees(b) = -8.1 +/- 1.2 kJ mol(-1) and DeltaS degrees(b) = -8.9 +/- 6.2 J K(-1) mol(-1). Thus, the complete set of kinetic and thermodynamic parameters for the two separate steps of O2 binding and phenol hydroxylation have been obtained for [Cu2(MeL66)]2+.     

Influence of terpyridine as pi-acceptor ligand on the kinetics and mechanism of the reaction of NO with ruthenium(III) complexes

The kinetics of the unusually fast reaction of cis- and trans-[Ru(terpy)(NH3)2Cl]2+ (with respect to NH3; terpy=2,2':6',2"-terpyridine) with NO was studied in acidic aqueous solution. The multistep reaction pathway observed for both isomers includes a rapid and reversible formation of an intermediate Ru(III)-NO complex in the first reaction step, for which the rate and activation parameters are in good agreement with an associative substitution behavior of the Ru(III) center (cis isomer, k1=618 +/- 2 M(-1) s(-1), DeltaH(++) = 38 +/- 3 kJ mol(-1), DeltaS(++) = -63 +/- 8 J K(-1) mol(-1), DeltaV(++) = -17.5 +/- 0.8 cm3 mol(-1); k -1 = 0.097 +/- 0.001 s(-1), DeltaH(++) = 27 +/- 8 kJ mol(-1), DeltaS(++) = -173 +/- 28 J K(-1) mol(-1), DeltaV(++) = -17.6 +/- 0.5 cm3 mol(-1); trans isomer, k1 = 1637 +/- 11 M(-1) s(-1), DeltaH(++) = 34 +/- 3 kJ mol(-1), DeltaS(++) = -69 +/-11 J K(-1) mol(-1), DeltaV(++) = -20 +/- 2 cm3 mol(-1); k(-1)=0.47 +/- 0.08 s(-1), DeltaH(++)=39 +/- 5 kJ mol(-1), DeltaS(++) = -121 +/-18 J K(-1) mol(-1), DeltaV(++) = -18.5 +/- 0.4 cm3 mol(-1) at 25 degrees C). The subsequent electron transfer step to form Ru(II)-NO+ occurs spontaneously for the trans isomer, followed by a slow nitrosyl to nitrite conversion, whereas for the cis isomer the reduction of the Ru(III) center is induced by the coordination of an additional NO molecule (cis isomer, k2=51.3 +/- 0.3 M(-1) s(-1), DeltaH(++) = 46 +/- 2 kJ mol(-1), DeltaS(++) = -69 +/- 5 J K(-1) mol(-1), DeltaV(++) = -22.6 +/- 0.2 cm3 mol(-1) at 45 degrees C). The final reaction step involves a slow aquation process for both isomers, which is interpreted in terms of a dissociative substitution mechanism (cis isomer, DeltaV(++) = +23.5 +/- 1.2 cm3 mol(-1); trans isomer, DeltaV(++) = +20.9 +/- 0.4 cm3 mol(-1) at 55 degrees C) that produces two different reaction products, viz. [Ru(terpy)(NH3)(H2O)NO]3+ (product of the cis isomer) and trans-[Ru(terpy)(NH3)2(H2O)]2+. The pi-acceptor properties of the tridentate N-donor chelate (terpy) predominantly control the overall reaction pattern.     

EPR and optical study of Mn2+ doped ammonium tartrate single crystals

EPR study of Mn2+ doped ammonium tartrate single crystals is carried out at room temperature. The spin Hamiltonian parameters are: gx=1.9225+/-0.0002, gy=1.9554+/-0.0002, gz=2.1258+/-0.0002, A=(78+/-2) x 10(-4) cm(-1), B=(75+/-2) x 10(-4) cm(-1), D=(191+/-2) x 10(-4) cm(-1), E=(61+/-2) x 10(-4) cm(-1) and a=(22+/-1) x 10(-4) cm(-1) for site I and gx=1.9235+/-0.0002, gy=1.9574+/-0.0002, gz=2.0664+/-0.0002, A=(78+/-2) x 10(-4) cm(-1), B=(75+/-2) x 10(-4) cm(-1), D=(180+/-2) x 10(-4) cm(-1), E=(57+/-2) x 10(-4) cm(-1) and a=(22+/-1) x 10(-4) cm(-1) for site II, respectively. The observed optical bands are fitted with inter-electronic repulsion parameters (B and C), crystal field parameter (Dq) and Trees correction (alpha) and the values found are B=752, C=2438, Dq=765 and alpha=76 cm(-1). The data obtained are further used to discuss the surrounding crystal field and the nature of metal-ligand bonding in the crystal.     

Mechanistic diversity covering 15 orders of magnitude in rates: cyanide exchange on [M(CN)(4)](2-) (M = Ni, Pd, and Pt)

Kinetic studies of cyanide exchange on [M(CN)(4)](2-) square-planar complexes (M = Pt, Pd, and Ni) were performed as a function of pH by (13)C NMR. The [Pt(CN)(4)](2-) complex has a purely second-order rate law, with CN(-) as acting as the nucleophile, with the following kinetic parameters: (k(2)(Pt,CN))(298) = 11 +/- 1 s(-1) mol(-1) kg, DeltaH(2) (Pt,CN) = 25.1 +/- 1 kJ mol(-1), DeltaS(2) (Pt,CN) = -142 +/- 4 J mol(-1) K(-1), and DeltaV(2) (Pt,CN) = -27 +/- 2 cm(3) mol(-1). The Pd(II) metal center has the same behavior down to pH 6. The kinetic parameters are as follows: (k(2)(Pd,CN))(298) = 82 +/- 2 s(-1) mol(-1) kg, DeltaH(2) (Pd,CN) = 23.5 +/- 1 kJ mol(-1), DeltaS(2) (Pd,CN) = -129 +/- 5 J mol(-1) K(-1), and DeltaV(2) (Pd,CN) = -22 +/- 2 cm(3) mol(-1). At low pH, the tetracyanopalladate is protonated (pK(a)(Pd(4,H)) = 3.0 +/- 0.3) to form [Pd(CN)(3)HCN](-). The rate law of the cyanide exchange on the protonated complex is also purely second order, with (k(2)(PdH,CN))(298) = (4.5 +/- 1.3) x 10(3) s(-1) mol(-1) kg. [Ni(CN)(4)](2-) is involved in various equilibrium reactions, such as the formation of [Ni(CN)(5)](3-), [Ni(CN)(3)HCN](-), and [Ni(CN)(2)(HCN)(2)] complexes. Our (13)C NMR measurements have allowed us to determine that the rate constant leading to the formation of [Ni(CN)(5)](3-) is k(2)(Ni(4),CN) = (2.3 +/- 0.1) x 10(6) s(-1) mol(-1) kg when the following activation parameters are used: DeltaH(2)() (Ni,CN) = 21.6 +/- 1 kJ mol(-1), DeltaS(2) (Ni,CN) = -51 +/- 7 J mol(-1) K(-1), and DeltaV(2) (Ni,CN) = -19 +/- 2 cm(3) mol(-1). The rate constant of the back reaction is k(-2)(Ni(4),CN) = 14 x 10(6) s(-1). The rate law pertaining to [Ni(CN)(2)(HCN)(2)] was found to be second order at pH 3.8, and the value of the rate constant is (k(2)(Ni(4,2H),CN))(298) = (63 +/- 15) x10(6) s(-1) mol(-1) kg when DeltaH(2) (Ni(4,2H),CN) = 47.3 +/- 1 kJ mol(-1), DeltaS(2) (Ni(4,2H),CN) = 63 +/- 3 J mol(-1) K(-1), and DeltaV(2) (Ni(4,2H),CN) = - 6 +/- 1 cm(3) mol(-1). The cyanide-exchange rate constant on [M(CN)(4)](2-) for Pt, Pd, and Ni increases in a 1:7:200 000 ratio. This trend is modified at low pH, and the palladium becomes 400 times more reactive than the platinum because of the formation of [Pd(CN)(3)HCN](-). For all cyanide exchanges on tetracyano complexes (A mechanism) and on their protonated forms (I/I(a) mechanisms), we have always observed a pure second-order rate law: first order for the complex and first order for CN(-). The nucleophilic attack by HCN or solvation by H(2)O is at least nine or six orders of magnitude slower, respectively than is nucleophilic attack by CN(-) for Pt(II), Pd(II), and Ni(II), respectively.     

Synthesis of derivatives of 1-phenylhydropyrimidines

The synthesis has been effected, via the corresponding N-phenyl-ß-aminopropionic acids, of 1-(o-methoxyphenyl)-, 1-(o-ethoxyphenyl)-, and 1-(o-tolyl)dihydrouracils and also of 1-(o-methoxyphenyl)-, 1-(o-ethoxyphenyl)-, and 1-(o-tolyl)-2-thiodihydrouracils. The dihydrouracits and thiodihydrouracils obtained have been reduced with LiAlH₄ to the corresponding 2-oxohexahydro-, and 2-thioxohexahydropyrimidines. By the action of bromine and the subsequent splitting out of HBr, the dihydrouracils have been converted into 1-(o-methoxyphenyl)-, 1-(o-ethoxyphenyl)-, and 1-(o-tolyl)uracils.     

Stereoselective synthesis of optically active disilanes and selective functionalization by the cleavage of silicon-naphthyl bonds with bromine

Optically active disilanes with one chiral silicon center, (R)-1,2-dimethyl-1-(naphth-1-yl)-1,2,2-triphenyldisilane and (R)-1,2,2-trimethyl-2-(4-methoxynaphth-1-yl)-1-(naphth-1-yl)-1-phenyldisilane, were obtained by the reaction of (S)-methyl(naphth-1-yl)phenylchlorosilane (> 99% ee) with methyldiphenylsilyllithium or by the reaction of methyldiphenylchlorosilane with optically active (S)-methyl(naphth-1-yl)phenylsilyllithium and by the reaction of (S)-methyl(naphth-1-yl)phenylchlorosilane (> 99% ee) with dimethyl(4-methoxynaphth-1-yl)silyllithium. Under the optimized conditions, the reactions proceeded with almost complete inversion for the cholorosilanes and retention for the silyl anions. Optically active disilanes with two chiral centers, (1R,2R)-1,2-dimethyl-1,2-di(naphth-1-yl)-1,2-diphenyldisilane and (1S,2S)-1,2-di(4-methoxynaphth-1-yl)-1,2-dimethyl-1,2-diphenyldisilane, were obtained in high optical purity by the reactions of corresponding optically active halogenosilanes (Cl or F) with optically active silyllithiums. The silicon-silicon bond and the silicon-naphthyl bond of (R)-1,1,2-trimethyl-1,2-di(naphth-1-yl)-2-phenyldisilane and (1R,2R)-1,2-dimethyl-1,2-di(naphth-1-yl)-1,2-diphenyldisilane were cleaved without selectivity on bromination. The silicon-(4-methoxynaphth-1-yl) bond of (R)-1,2,2-trimethyl-2-(4-methoxynaphth-1-yl)-1-(naphth-1-yl)-1-phenyldisilane was regiospecifically cleaved, followed by the stereoselective cleavage of the remaining chiral silicon-naphthyl bond (94% inversion). Although the silicon-(4-methoxynaphth-1-yl) bonds of (1S,2S)-1,2-di(4-methoxynaphth-1-yl)-1,2-dimethyl-1,2-diphenyldisilane (> 99% ee) were regioselectively cleaved without silicon-silicon bond scission, remarkable racemization could not be avoided during the one-pot reaction.     

Synthesis of 1,2,4-triazol-5-ylidenes and their interaction with acetonitrile and chalcogens

Two new, more convenient methods for the synthesis of 1,2,4-triazol-5-ylidenes are described. Four new 1,2,4-triazol-5-ylidenes have been prepared using these methods: 1-(1-adamantyl)-3,4-diphenyl-1,2,4-triazol-5-ylidene (2a), 1-(1-adamantyl)-3-phenyl-4-(p-bromophenyl)-1,2,4-triazol-5-ylidene (2b), 1-(1-adamantyl)-3-phenyl-4-(alpha-naphthyl)-1,2,4-triazol-5-ylidene (2c), and 1-(1-adamantyl)-3,4-di(p-bromophenyl)-1,2,4-triazol-5-ylidene (2d). The X-ray crystal structures of 2d and the precursor salt 1-(1-adamantyl)-3,4-di(p-bromophenyl)-1,2,4-triazolium bromide (1e) are described. Compound 2a reacts with CH(3)CN via C-H insertion to form 1-(1-adamantyl)-3,4-diphenyl-5-cyanomethyl-5H-1,2,4-triazoline (3), and 2a and 2d react with elemental sulfur and elemental selenium, respectively, to form the corresponding thione (4) and selenone (5).     

Studies of the kinetics and thermochemistry of the forward and reverse reaction Cl + C6H6 = HCl + C6H5

The laser flash photolysis resonance fluorescence technique was used to monitor atomic Cl kinetics. Loss of Cl following photolysis of CCl4 and NaCl was used to determine k(Cl + C6H6) = 6.4 x 10(-12) exp(-18.1 kJ mol(-1)/RT) cm(3) molecule(-1) s(-1) over 578-922 K and k(Cl + C6D6) = 6.2 x 10(-12) exp(-22.8 kJ mol(-1)/RT) cm(3) molecule(-1) s(-1) over 635-922 K. Inclusion of literature data at room temperature leads to a recommendation of k(Cl + C6H6) = 6.1 x 10(-11) exp(-31.6 kJ mol(-1)/RT) cm(3) molecule(-1) s(-1) for 296-922 K. Monitoring growth of Cl during the reaction of phenyl with HCl led to k(C6H5 + HCl) = 1.14 x 10(-12) exp(+5.2 kJ mol(-1)/RT) cm(3) molecule(-1) s(-1) over 294-748 K, k(C6H5 + DCl) = 7.7 x 10(-13) exp(+4.9 kJ mol(-1)/RT) cm(3) molecule(-1) s(-1) over 292-546 K, an approximate k(C6H5 + C6H5I) = 2 x 10(-11) cm(3) molecule(-1) s(-1) over 300-750 K, and an upper limit k(Cl + C6H5I) < or = 5.3 x 10(-12) exp(+2.8 kJ mol(-1)/RT) cm(3) molecule(-1) s(-1) over 300-750 K. Confidence limits are discussed in the text. Third-law analysis of the equilibrium constant yields the bond dissociation enthalpy D(298)(C6H5-H) = 472.1 +/- 2.5 kJ mol(-1) and thus the enthalpy of formation Delta(f)H(298)(C6H5) = 337.0 +/- 2.5 kJ mol(-1).     

C-hydroxyalkylation of N-adamantylanilines by hexafluoroacetone and methyl trifluoropyruvate

N-(1-Adamantyl)-4-(1-hydroxy-1-trifluoromethyl- 2,2,2- trifluoroethyl)aniline (III) and N-(1-adamantyl)-4-(1-hydroxy-1-methoxycarbony 1-2,2,2-trif luoroethyl) aniline (IV) were obtained by the reaction of N-(1-adamantyl)aniline with ketone (I) and ketoester (II). Analogous procedures gave N-(2-adamantyl)- 4- (1-hydroxy- 1-trifluoromethyl- 2, 2,2-trifluoroethyl)aniline (V) and N-(2-adamantyl)-4-(1-hydroxy-1-methoxycarbonyl-2,2,2-trifluoroethyl)aniline (VI). The action of hydrogen peroxide on (III) in the presence of sodium tungstenate gave N- (1- adamantyl)- 4- (1- hydroxy- 1- trifluoromethyl- 2,2,2- trifluoroethyl)aniline N-oxide (VII).Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 10, pp. 2348–2350, October, 1989.     

Energetics of hydroxybenzoic acids and of the corresponding carboxyphenoxyl radicals. Intramolecular hydrogen bonding in 2-hydroxybenzoic acid

The energetics of the phenolic O-H bond in the three hydroxybenzoic acid isomers and of the intramolecular hydrogen O-H- - -O-C bond in 2-hydroxybenzoic acid, 2-OHBA, were investigated by using a combination of experimental and theoretical methods. The standard molar enthalpies of formation of monoclinic 3- and 4-hydroxybenzoic acids, at 298.15 K, were determined as Delta(f)(3-OHBA, cr) = -593.9 +/- 2.0 kJ x mol(-1) and Delta(f)(4-OHBA, cr) = -597.2 +/- 1.4 kJ x mol(-1), by combustion calorimetry. Calvet drop-sublimation calorimetric measurements on monoclinic samples of 2-, 3-, and 4-OHBA, led to the following enthalpy of sublimation values at 298.15 K: Delta(sub)(2-OHBA) = 94.4 +/- 0.4 kJ x mol(-1), Delta(sub)(3-OHBA) = 118.3 +/- 1.1 kJ x mol(-1), and Delta(sub)(4-OHBA) = 117.0 +/- 0.5 kJ x mol(-1). From the obtained Delta(f)(cr) and Delta(sub) values and the previously reported enthalpy of formation of monoclinic 2-OHBA (-591.7 +/- 1.3 kJ x mol(-1)), it was possible to derive Delta(f)(2-OHBA, g) = -497.3 +/- 1.4 kJ x mol(-1), Delta(f)(3-OHBA, g) = -475.6 +/- 2.3 kJ x mol(-1), and Delta(f)(4-OHBA, cr) = -480.2 +/- 1.5 kJ x mol(-1). These values, together with the enthalpies of isodesmic and isogyric gas-phase reactions predicted by density functional theory (B3PW91/aug-cc-pVDZ, MPW1PW91/aug-cc-pVDZ, and MPW1PW91/aug-cc-pVTZ) and the CBS-QMPW1 methods, were used to derive the enthalpies of formation of the gaseous 2-, 3-, and 4-carboxyphenoxyl radicals as (2-HOOCC(6)H(4)O(*), g) = -322.5 +/- 3.0 kJ.mol(-1) Delta(f)(3-HOOCC(6)H(4)O(*), g) = -310.0 +/- 3.0 kJ x mol(-1), and Delta(f)(4-HOOCC(6)H(4)O(*), g) = -318.2 +/- 3.0 kJ x mol(-1). The O-H bond dissociation enthalpies in 2-OHBA, 3-OHBA, and 4-OHBA were 392.8 +/- 3.3, 383.6 +/- 3.8, and 380.0 +/- 3.4 kJ x mol(-1), respectively. Finally, by using the ortho-para method, it was found that the H- - -O intramolecular hydrogen bond in the 2-carboxyphenoxyl radical is 25.7 kJ x mol(-1), which is ca. 6-9 kJ x mol(-1) above the one estimated in its parent (2-OHBA), viz. 20.2 kJ x mol(-1) (theoretical) or 17.1 +/- 2.1 kJ x mol(-1) (experimental).     

Thermodynamic and kinetic studies of H atom transfer from HMo(CO)3(eta(5)-C5H5) to Mo(N[t-Bu]Ar)3 and (PhCN)Mo(N[t-Bu]Ar)3: direct insertion of benzonitrile into the Mo-H bond of HMo(N[t-Bu]Ar)3 forming (Ph(H)C=N)Mo(N[t-Bu]Ar)3

Synthetic studies are reported that show that the reaction of either H2SnR2 (R = Ph, n-Bu) or HMo(CO)3(Cp) (1-H, Cp = eta(5)-C5H5) with Mo(N[t-Bu]Ar)3 (2, Ar = 3,5-C6H3Me2) produce HMo(N[t-Bu]Ar)3 (2-H). The benzonitrile adduct (PhCN)Mo(N[t-Bu]Ar)3 (2-NCPh) reacts rapidly with H2SnR2 or 1-H to produce the ketimide complex (Ph(H)C=N)Mo(N[t-Bu]Ar)3 (2-NC(H)Ph). The X-ray crystal structures of both 2-H and 2-NC(H)Ph are reported. The enthalpy of reaction of 1-H and 2 in toluene solution has been measured by solution calorimetry (DeltaH = -13.1 +/- 0.7 kcal mol(-1)) and used to estimate the Mo-H bond dissociation enthalpy (BDE) in 2-H as 62 kcal mol(-1). The enthalpy of reaction of 1-H and 2-NCPh in toluene solution was determined calorimetrically as DeltaH = -35.1 +/- 2.1 kcal mol(-1). This value combined with the enthalpy of hydrogenation of [Mo(CO)3(Cp)]2 (1(2)) gives an estimated value of 90 kcal mol(-1) for the BDE of the ketimide C-H of 2-NC(H)Ph. These data led to the prediction that formation of 2-NC(H)Ph via nitrile insertion into 2-H would be exothermic by approximately 36 kcal mol(-1), and this reaction was observed experimentally. Stopped flow kinetic studies of the rapid reaction of 1-H with 2-NCPh yielded DeltaH(double dagger) = 11.9 +/- 0.4 kcal mol(-1), DeltaS(double dagger) = -2.7 +/- 1.2 cal K(-1) mol(-1). Corresponding studies with DMo(CO)3(Cp) (1-D) showed a normal kinetic isotope effect with kH/kD approximately 1.6, DeltaH(double dagger) = 13.1 +/- 0.4 kcal mol(-1) and DeltaS(double dagger) = 1.1 +/- 1.6 cal K(-1) mol(-1). Spectroscopic studies of the much slower reaction of 1-H and 2 yielding 2-H and 1/2 1(2) showed generation of variable amounts of a complex proposed to be (Ar[t-Bu]N)3Mo-Mo(CO)3(Cp) (1-2). Complex 1-2 can also be formed in small equilibrium amounts by direct reaction of excess 2 and 1(2). The presence of 1-2 complicates the kinetic picture; however, in the presence of excess 2, the second-order rate constant for H atom transfer from 1-H has been measured: 0.09 +/- 0.01 M(-1) s(-1) at 1.3 degrees C and 0.26 +/- 0.04 M(-1) s(-1) at 17 degrees C. Study of the rate of reaction of 1-D yielded kH/kD = 1.00 +/- 0.05 consistent with an early transition state in which formation of the adduct (Ar[t-Bu]N)3Mo...HMo(CO)3(Cp) is rate limiting.