Measurement of acid-catalyzed isomerization of unsaturated aldehyde-2,4-dinitrophenylhydrazone derivatives by high-performance liquid chromatography analysis

Aldehyde-2,4-dinitrophenylhydrazones exist as (E)- and (Z)-geometrical isomers, and adventitious isomerization during sample preparation can cause analytical errors. Purified alkenal-2,4-dinitrophenylhydrazone derivatives comprise only the (E)-isomer. However, partial isomerization to the (Z)-isomer occurs upon addition of acid to attain an equilibrium isomer ratio. The UV-visible spectral properties of the isomers differ; the (Z)-isomer exhibiting a 6-10 nm lower absorption maximum compared to the (E)-isomer. Alkenal-2,4-dinitrophenylhydrazones having a CC double bond at the 2- or 3-position of the alkenal exhibited similar absorption maxima with an equilibrium isomer ratio (0.035) that was much lower than those of other alkenals. The CC double bond at the 3-position migrates to a position of conjugation with the CN double bond during hydrazone synthesis to form a stabilized molecular structure. Alkenal-2,4-dinitrophenylhydrazones having a double bond at the 4-position or greater exhibited a similar absorption maxima equilibrium isomer ratio (0.14) to alkanal-2,4-dinitrophenylhydrazones. The quantitative analysis of carbonyl compounds in air or water using DNPH is usually conducted in the presence of an acid catalyst. Consequently, the solution of the direct extract prepared for HPLC or GC analysis contains both (E)- and (Z)-isomers.     

Determination of delta4-3-ketosteroids based on oxime formation by difference circular dichroism spectroscopy

delta4-3-Ketosteroids exhibit an intensive negative Cotton effect on the circular dichroism (CD) spectra in the wavelength range for the n-pi* electronic transition (270-350 nm). With hydroxylamine hydrochloride, delta4-3-ketosteroid compounds can be transformed into oxime derivatives. Following oxime formation, positive ellipticity with low intensity can be registered in this wavelength range. The quantitative determination of delta4-3-ketosteroids is based on the considerable difference between the ellipticities before and after oxime formation. The difference ellipticity for the six ketosteroids examined (norethisterone, levonorgestrel, levonorgestrel acetate, methyltestosterone, testosterone phenylpropionate, nortestosterone phenylpropionate) varies linearly with the concentration in the interval 6 x 10(-6)-3 x 10(-3) mol/L. The method can be well applied to determination of delta4-3-ketosteroid contamination of norgestimate [(+)-13-ethyl-17-hydroxy-18,19-dinor-17alpha-pregn4-en-20-yn-3-one oxime acetate]; 0.02-10% impurity can be measured.     

反式白藜芦醇热稳定性与光致异构化的高效液相色谱和液相色谱-电喷雾离子化质谱研究

应用高效液相色谱(HPLC)及液相色谱-电喷雾离子化质谱(LC-ESI-MS)方法对反式白藜芦醇的长期热稳定性及光致顺反异构化反应进行了研究。色谱条件为:采用Hypersil-ODS色谱柱分离,流动相为甲醇-0.05%三氟乙酸水溶液(体积比为60∶40)(用于HPLC分析)及甲醇-5 mmol/L甲酸铵水溶液(含0.1%甲酸)（体积比为60∶40)(用于LC-ESI-MS分析),检测波长300 nm,进样量20　μL(HPLC)或10 μL(LC-ESI-MS);质谱检测中设定为负离子模式。在4~40     

Real-Time Distinguishing of the Xylene Isomers Using Photoionization and Dissociation Mass Spectra Obtained by Femtosecond Laser Mass Spectrometry (FLMS)

Abstract

Distinguishing chemicals and improvement on analytical methods has a direct impact on modern chemical analysis. In this work, the dissociative ionization of xylene isomers was investigated using a femtosecond laser mass spectrometry (FLMS) method with a custom-built linear time-of-flight (TOF) instrument. Laser beams at 800?nm and 400?nm were used and intensity-dependent analysis of the obtained mass spectra was performed using principal component analysis (PCA) to distinguish the xylene isomers, which give identical mass spectra in appearance that cannot be distinguished using normal mass spectrometry methods. The results show that there is a statistically highly significant difference between the xylene isomers for two principal components (1 ? α?>?99.99%) and minimal information loss (<5%) took place during the PCA procedure. Also, the use of the k-medoid clustering method showed that the isomers may be distinguished in real-time for a wide range of ionization laser pulse powers with approximately 99% accuracy. The results suggest that real-time isomer analysis by the FLMS method is suitable for mass spectral identification applications. The FLMS method has been shown to be an important alternative to other mass spectrometric methods that use different ionization mechanisms.     

ABSORBANCE and CIRCULAR DICHROISM SPECTRA OF 1-C1S PHOTOPRODUCT FORMED BY IRRADIATING FROG RHODOPSIN

Abstract— We showed by spectrophotometry and HPLC that a photoproduct having 7-cis retinal (1-cis photoproduct) can be derived from the photoisomerization of frog lumirhodopsin (L) and metarhodopsin I (M I). The efficiency of the isomerization was higher in M I than in L. The absorption maximum of the 1-cis photoproduct at -20°C is at 455 nm, and its maximum absorbance 1.1 times as large as that of rhodopsin. The photoproduct exhibited two positive CD bands at 450 nm α-band) and 320 nm (β-band); the molecular ellipticity at a-band ([θ] = 73000) being larger than that of rhodopsin ([θ] = 61000). Re-examination of the absorption spectra of rhodopsin intermediates gave the absorption maxima of L. M 1 and M 111 to be 522, 482 and 475 nm, respectively.     

Determination of Neurotoxin b-ODAP and Non-protein Amino Acids in Lathyrus Sativus by High-Performance Liquid Chromatography with Precolumn Derivatization with 6-Amino quinolyl-N-hydroxysuccinimidyl Carbamate (AQC)

A new method was developed for the quantitative determination of the neurotoxic non-protein amino acid, 3-N-oxalyl-L-2,3-diaminopropionic acid (b -ODAP), its nontoxic a -isomer and other non-protein amino acids in the plant samples of Lathyrus sativus after derivatization with 6-aminoquinolyl-N-hydroxysuccinimidyl carbamate (AQC) by reversed-phase high-performance liquid chromatography (HPLC). 2-Amino butyric acid (ABA) was used as an internal standard. The RP HPLC detection limit for both isomers is 1.8 ng with good response linearity. The results are compared with a colorimetric method.     

Comparison of shikimic acid determination by capillary zone electrophoresis with direct and indirect detection with liquid chromatography for varietal differentiation of red wines

Two capillary zone electrophoretic (CZE) methods for determination of shikimic acid in Chilean red wine were developed and compared with a HPLC method. Both electrophoretic methods were carried out by using a reversed electroosmotic flow induced by trimethyl(tetradecyl)ammoniumbromide (TTAB) with indirect detection at 260 nm using p-aminobenzoic acid as a UV-absorbing co-ion or by direct detection at 213 nm. In both cases, the separation was carried out in a 50 microm I.D. uncoated capillary with an effective length of 48 cm, a negative power supply of 30 kV, using a buffer based on bis[2-hydroxyethyl]imino-tris[hydroxymethyl]methane (Bis-Tris), pH 7.0 or 7.5 and hydrodynamic injection. The chromatographic separations were carried out on a C-18 reversed phase column followed by a sulfonyl-styrene-divinylbenzene (S-DVB) ion exclusion column at 70 degrees C with H2SO4 0.02 M as isocratic mobile phase and a flow rate of 0.5 mL min(-1). The three methods allowed the quantification of shikimic acid with quantification limits between 1.0 and 12.0 mg L(-1) and precision between 7.3 and 10.1%, however, only the concentrations obtained by CZE with direct detection were statistically similar to those of HPLC. This parameter was evaluated as analytical tool to verify varietal authenticity of red wines. In all cases, the Cabernet Sauvignon wines presented higher concentrations of shikimic acid, compared with Merlot or Carmenère wines.     

RESONANCE RAMAN EVIDENCE FOR 15-cis TO MA,-trans PHOTOISOMERIZATION OF SPIRILLOXANTHIN BOUND TO A REDUCED FORM OF THE REACTION CENTER OF Rhodospirillum rubrum SI

The reaction center (RC) of Rhodospirillum rubrum SI, which was prepared by ultrafiltration, showed one peak in molecular-sieve HPLC, but it showed two peaks in diethylaminoethyl (DEAE) ion-exchange HPLC; they were named as RC-α and RC-β in the order of elution, Nonequilibrated isoelectric electrophoresis, together with DEAE ion-exchange HPLC, showed that RC-β is electronically more negative than RC-α. Oxidation of RC-β by addition of ferricyanide caused its transformation into RC-α, while reduction of RC-α by adding ascorbate and subsequent illumination caused its transformation into RC-β. Resonance Raman spectroscopy of the RC at liquid nitrogen temperature detected the all-trans and the 15-cis isomers in a ratio of 1:1, but HPLC analyses of the carotenoid extracted from the RC before and after the Raman measurements detected the pair of isomers in a ratio of 1:6. Thus, the 15-cis to all-trans isomerization takes place during irradiation at liquid nitrogen temperature, while the reverse isomerization takes place in the dark. The isolated RC-α and RC-β exhibited the bleaching of the 868 nm band, and contained the H, M and L subunits and 1.2-1.4 molecules of ubiquinone-10 per RC. Each RC slowly equilibrated in the dark toward a mixture of RC-α and RC-β. Generation of the all-trans isomer in the light was found not in RC-α but in RC-β.     

Electrospray and atmospheric pressure chemical ionization tandem mass spectrometric behavior of eight anabolic steroid glucuronides

Mass spectrometric and tandem mass spectrometric behavior of eight anabolic steroid glucuronides were examined using electrospray (ESI) and atmospheric pressure chemical ionization (APCI) in negative and positive ion mode. The objective was to elucidate the most suitable ionization method to produce intense structure specific product ions and to examine the possibilities of distinguishing between isomeric steroid glucuronides. The analytes were glucuronide conjugates of testosterone (TG), epitestosterone (ETG), nandrolone (NG), androsterone (AG), 5alpha-estran-3alpha-ol-17-one (5alpha-NG), 5beta-estran-3alpha-ol-17-one (5beta-NG), 17alpha-methyl-5alpha-androstane-3alpha,17beta-diol (5alpha-MTG), and 17alpha-methyl-5beta-androstane-3alpha,17beta-diol (5beta-MTG), the last four being new compounds synthesized with enzyme-assisted method in our laboratory. High proton affinity of the 4-ene-3-one system in the steroid structure favored the formation of protonated molecule [M + H]+ in positive ion mode mass spectrometry (MS), whereas the steroid glucuronides with lower proton affinities were detected mainly as ammonium adducts [M + NH4]+. The only ion produced in negative ion mode mass spectrometry was a very intense and stable deprotonated molecule [M - H]- . Positive ion ESI and APCI MS/MS spectra showed abundant and structure specific product ions [M + H - Glu]+, [M + H - Glu - H2O]+, and [M + H - Glu - 2H2O]+ of protonated molecules and corresponding ions of the ammonium adduct ions. The ratio of the relative abundances of these ions and the stability of the precursor ion provided distinction of 5alpha-NG and 5beta-NG isomers and TG and ETG isomers. Corresponding diagnostic ions were only minor peaks in negative ion MS/MS spectra. It was shown that positive ion ESI MS/MS is the most promising method for further development of LC-MS methods for anabolic steroid glucuronides.     

CHARACTERIZATION OF CIS- AND TRANS-DINITROBIS-(l-CYCLOHEXANEDIAMINE)-COBALT(III) CHLORIDE1

Abstract

Two geometrical isomers of [Co(l-chxn)₂(No₂)₂]Cl have been isolated. The trans-isomer is eluted first from a cellulose ion exchange column as a single isomer. The cis-isomer corresponds to the complex previously reported as the trans-isomer. The cis-isomer with the same CD sign pattern as for the trans-isomer is stereoselectively favored, but a small amount of the second cis-isomer separates using Cellex CM ion exchange cellulose. The CD spectra of the cis- and trans- isomers are similar to those of the corresponding isomers of the l-pn complex.     

Complete separation of the geometical isomers of linolenic acid by high performance liquid chromatography with a silver ion column

A method has been developed for separation of linolenic acid and its seven isomers by HPLC on a silver-ion-loaded column. The standard 18:3 isomers, isolated from a heated linseed oil or prepared by isomerization of linolenic acid, were converted into phenacyl esters and detected by UV at 238 nm. The use of low temperature (10 °C) combined with a gradient of dichloromethane and methanol enabled separation of all the cis/trans isomers. The peaks were identified by comparison of ECL values with those of a standard mixture, by chromatographing collected HPLC fractions on a polar GC column. HPLC quantification was compared with GC analysis. There was satisfactory agreement between the tow methods. This method could be used for seperation, collection and quantification of 18:3 fatty acids with trans double bonds in different oils and foods.     

Theoretical Study on Mechanism of C5H7·+O2 Reaction

The potential energy surface (PES) for the reaction of E,E-pentadienyl with molecular oxygen was theoretically studied at the G3B3//B3LYP/6-311G(d,p) level of theory. The first step of the reaction was found to be the direct adduction of molecular O2 on either the C1 or the C3 atoms of E,E-pentadienyl, forming two C5H7O2· isomers. These two C5H7O2· isomers undergo a series of isomerization processes through either the hydrogen-transfer or cyclization pathway. In the final step, the hydrogen-transferred and cyclized isomers decompose into unsaturated aldehydes, unsaturated ketones, and hydroxyl radicals. Involves 20 stable species and 14 transition states, and the energies and structures of all reactants, products and transition states were calculated. Based on the calculated barriers and heats of formation, the authors suggest that the C2H3O·+C3H4O formation channel is the dominant channel for the C5H7·+O2 reaction. The possible existence of C5H7O2· radicals as long lifetime intermediates is also proposed, which is consistent with the recent photoionization mass spectrometric experiments by Zils et al.     

Determination of rimantadine in pharmaceutical preparations by capillary zone electrophoresis with indirect detection or after derivatization

Summary Rimantadine is synthetic analog of amantadine; both are antiviral agents used for prophylaxis and treatment of influenza A. A capillary zone electrophoretic (CZE) procedure for the determination of rimantadine has been developed. As the direct determination of rimantadine is poorly sensitive because the compound is almost transparent in the UV/Vis range, several indirect methods were studied. Two were found to be the particularly useful: (a) indirect detection using 5 mM 4-methylbenzylamine in 1:4 methanol-water as absorbing background electrolyte, with detection at 210 nm, and (b) derivatization of rimantadine with 1,2-naphthoquinone-4-sulfonic acid in alkaline medium and subsequent determination of the derivative by CZE (40 mM tetraborate, pH 9.2, detection at 280 nm). Uncoated capillary tubing, 44 cm length ×75 μM i.d., was used for both determinations. The detection limits were 0.1 and 2 ppm for methods a and b, respectively. The methods were used to determine rimantadine in pharmaceutical products and for dissolution testing of Flumadin^? tablets.     

Determination of the pesticide naptalam and its degradation products by positive and negative ion mass spectrometry

N-1-Naphthylphtalamic acid (naptalam) and its degradation products, 1-naphthylamine and N-(1-naphthyl) phthalimide were simultaneously determined in river water by two independent mass spectrometric (MS) methods. These were negative ion MS (NIMS) and programmable temperature vaporizer gas chromatography mass spectrometry (PTV-GC MS) with electron impact ionization (positive ions). Prior to the NIMS analysis, the samples were preconcentrated by solid phase extraction (SPE) of C18 membrane discs. The PTV-GC MS studies were performed without any preconcentration procedure. Selected ion monitoring (SIM) and internal standardization with naphthalene were applied in both methods. The limits of determination (LOD) of NIMS studies were 230, 270 and 260 ng L-1 for naptalam, 1-naphthylamine and N-(1-naphthyl) phthalimide, respectively, with relative standard deviation (RSD) < 1% (n = 5) and of PTV-GC MS 17, 11 and 15 ng L-1 (RSD < 0.7%, n = 5). The LOD, linearity, RSD and time required for these methods are far better than for HPLC analyses.     

Photoisomerization and photodissociation of toluene in molecular beam

The photodissociation of isotope-labeled toluene C(6)H(5)CD(3) and C(6)H(5)(13)CH(3) molecules at 6.4 eV under collision-free conditions was studied in separate experiments by multimass ion imaging techniques. In addition to the major dissociation channels, C(6)H(5)CD(3) --> C(6)H(5)CD(2) + D and C(6)H(5)CD(3) --> C(6)H(5) + CD(3), the respective photofragments CD(2)H, CDH(2), and CH(3) and their heavy fragment partners C(6)H(4)D, C(6)H(3)D(2), and C(6)H(2)D(3) were observed from C(6)H(5)CD(3) dissociation. Photofragments (13)CH(3) and CH(3), and their heavy fragment partners C(6)H(5) and (13)CC(5)H(5), were also observed from C(6)H(5)(13)CH(3) dissociation. Our results show that 25% of the excited toluene isomerizes to a seven-membered ring (cycloheptatriene) and then rearomatizes prior to dissociation. The isomerization pathway competes with direct C-C bond and C-H bond dissociation. The significance of this isomerization is that the carbon atoms and hydrogen atoms belonging to the alkyl group are involved in an exchange with those atoms in the aromatic ring during isomerization. The dissociation rate of toluene at 193 nm is measured to be (1.17 +/- 0.1) x 10(6) s(-)(1).     

Tetrathiafulvalenenaphthalenophanes: planar chirality and cis/trans photoisomerization

A cyclophane incorporating one 1,5-dioxynaphthalene ring system and one tetrathiafulvalene (TTF) unit bridged by [SCH(2)CH(2)O] linkages has been synthesized. In this cyclophane, the TTF unit can adopt either cis or trans configurations. In addition, the 1, 5-dioxynaphthalene ring system imposes one element of planar chirality on this cyclophane. A second element of planar chirality is introduced by the trans form of the TTF unit. Thus, the cyclophane exists in diastereoisomeric forms as three pairs of enantiomers. The enantiomeric pairs associated with the cis form of the TTF unit, as well as one of those associated with the trans form, have been isolated by crystallization, and their structures assigned in the solid state by single-crystal X-ray analyses. In solution, cis/trans isomerization occurs when either the cis or the trans form of the cyclophane is exposed to light. The photoisomerization reaction can be followed by (1)H NMR and UV-vis spectroscopies, as well as by HPLC. The photoisomerization quantum yield has been measured at two different excitation wavelengths (406 and 313 nm). In both cases, the trans --> cis process (Phi = 0.20 at 406 nm) is much more efficient than the reverse cis --> trans process (Phi = 0.030 at 406 nm). Since the absorption spectra of the trans and cis isomers are different and the quantum yield of the trans --> cis photoisomerization reaction depends on the excitation wavelength, the mole fraction of the two diastereoisomers present at the photostationary state depends on the wavelength of the exciting light. No isomerization occurs when the solutions, regardless of the mole fraction of the two diastereoisomers, are stored in the dark.     

Pyrazolylazophenyl Ether-Based Photoswitches: Facile Synthesis, (Near-)Quantitative Photoconversion,Long Thermal Half-Life,Easy Functionalization,and Versatile Applications in Light-Responsive Systems

Molecular photoswitches (e.g., azobenzenes) can reversibly interconvert between their thermodynamically stable and metastable isomers upon light irradiations. However, it remains challenging to integrate both high bidirectional photoconversion and long metastable-state lifetime into a photoswitchable functionality. Here, we introduce pyrazolylazophenyl ethers ( pzAzo ethers ) as a class of azo photoswitches that provides quantitative (>98 %) trans–cis photoisomerization (365 nm light), near-quantitative (95–96 %) reverse isomerization (532 nm light), and a long cis-isomer half-life of three months. They can be easily synthesized in high yields and readily functionalized at one or both sides with a broad scope of substituent groups. Molecular systems incorporating pzAzo ethers can be endowed with high responsiveness, robust reversibility, and long persistent metastable states. Such superior yet pragmatic azo switches hold high promise for upgraded photoregulation in many light-responsive applications.     

Determination of 17-oxosteroid sulphates in serum by ion-pair extraction, prelabelling with dansylhydrazine and high-performance liquid chromatography with fluorescence detection

A new high-performance liquid chromatographic (HPLC) method with fluorescence detection is described for the direct determination of four serum 17-oxosteroid sulphates. Each serum sample was deproteinated with methanol, the methanol was evaporated and 17-oxosteroid sulphates in the residue were extracted with benzene as ion pairs in the presence of tetrapentylammonium ion. The ion pairs were labelled with dansylhydrazine and the hydrazones were separated by HPLC on a Capcell-Pak C8 (silicone polymer-coated silica gel modified with octyl groups) reversed-phase column using methanol-0.5% (w/v) sodium acetate-50% (v/v) acetic acid (57:42:1, v/v/v) as the mobile phase. The eluent was monitored with a fluorometric detector at an excitation wavelength of 330 nm and an emission wavelength of 540 nm.     

Isomerization of urocanic acid after ultraviolet radiation is influenced by skin pigmentation

Exposure to ultraviolet (UV) radiation may induce erythema, DNA damage and suppression of immune responses. Melanin pigmentation offers protection against the first two of these effects, but immunosuppression seems to occur irrespective of the subject's pigmentation. Cis-urocanic acid (cis-UCA), produced by isomerization of trans-UCA in the stratum corneum on UV exposure, initiates some of the immunomodulatory effects of UV radiation. In the present study the relationship between skin pigmentation and UCA isomerization has been examined in 28 healthy individuals of skin types I-IV. Pigmentation is measured in five areas of not recently exposed back skin before irradiation with 0, 0.45, 0.9, 1.8 and 3.6 standard erythema dose (SED) of filtered broadband UV-B (1 SED = 10 mJ cm-2 at 298 nm). The concentration of UCA isomers is measured immediately after the irradiation. With 3.6 SED, the relative production of cis-UCA is close to the maximum obtainable, irrespective of skin type. A significant negative correlation is found between pigmentation and relative production of cis-UCA at 0.45 and 1.8 SED, and between pigmentation and absolute production of cis-UCA at 0.45 SED. At doses of 0.45 and 0.9 SED the relative and absolute production of cis-UCA are higher in the group with skin types I and II when compared with the group with skin types III and IV. The higher isomerization in the lightly pigmented subjects than in the more pigmented ones may indicate that people with fair skin are at a relatively higher risk of immunosuppression when exposed to low doses of UV radiation.     

The Preparation and Characterization of Conjugated Linolenic Acid

Conjugated Linolenic Acid (CLN) has recently been shown to have a more strong cytotoxic effect on various human tumor cell lines than CLA. In CLN, all the three double bonds are conjugated, whereas they are methylene-interrupted in LN. Some seed oil, such as tung oil and pomegranate seed oil, principally consist of CLN, accounting for 76.5% and 75.5%, respectively.CLN can be characterized using the combination of gas chromatography (GC), highperformance liquid chromatography (HPLC) and UV /VIS spectrophotomea-ic analysis. GC can separate the CLN from other fatty acids and HPLC can separate the individual CLN isomers.The conjugated triene formation has a maximum absorbency at 268 nm and the conjugated diene formation has an absorbency at 235 nm in UV spectrum.CLN was prepared from linseed oil by isomerization reaction in our present study. By treating at was isomerized and the product was purified by recrystallizing in the methanol. The GC and UV /VIS spectrophotometric analysis were used to characterize the obtained products. It was found that the a-LN in the linseed oil was converted to the corresponding conjugated diene acids and CLN. The GC analysis also showed that there formed about 20% CLN when reacting for 10h with 40% KOH/ethylene glycol.