Determination of DNA by Use of the Molecular “Light Switch” Complex of Ru(bipy)2(dppz)2+

 A novel fluorimetric method has been developed for selective determination of DNA with the molecular “Light Switch” complex of Ru(bipy)₂(dppz)²⁺. The maximum fluorescence intensity was produced in the pH range of 9.3–11.5, with the maximum excitation and emission wavelength of 471.8 nm and 599.8 nm, respectively. Under the optimum conditions, the fluorescence intensity was in proportion to the concentration of DNA. The linear range for calf thymus DNA salmon sperm DNA and herring sperm DNA reaches from the limit of determination to 1.5 μg/mL. The limits of determination for calf thymus DNA salmon sperm DNA and herring sperm DNA are 3.3 ng/mL, 2.8 ng/mL and 4.4 ng/mL, respectively. When the proposed method was used to determine DNA in the presence of some coexisting substances, a satisfactory result was obtained. Received December 29, 1998. Revision June 28, 1999.     

Influence of several factors on potential-modulated DNA cleavage by the Cu(en)2 and Cu(EDTA) complexes

Potential-modulated DNA cleavage in the presence of copper–ethylenediamine (en) and –ethylenediamine tetraacetic acid (EDTA) complexes was investigated at a gold electrode in a thin layer cell. DNA can be efficiently cleaved through production of active oxygen species at −0.50 V (vs. Ag/AgCl/KCl(sat)) by reducing Cu(en)₂²⁺ to Cu(en)₂⁺ or Cu(EDTA)²⁻ to Cu(EDTA)³⁻. The extent of DNA cleavage increased as the working potential was shifted more negative and the electrolysis time was increased in air-saturated solution. When a small flow of O₂ was passed through the solution during electrolysis, the extent of DNA cleavage was dramatically enhanced. In the absence of Cu(en)₂²⁺ or Cu(EDTA)²⁻ complex, slight DNA cleavage was observed at a more negative working potential due to the reduction of oxygen at the electrode. This observation suggests that potential-modulated DNA cleavage was caused mainly by electrochemical reduction of the Cu(en)₂²⁺ or Cu(EDTA)²⁻ complex in the presence of oxygen. The cleaved DNA fragments were separated by high performance liquid chromatography (HPLC). The experimental results proved that this method of potential-modulated DNA cleavage by Cu(en)₂²⁺ and Cu(EDTA)²⁻ complexes is simple, mild and highly efficient.     

Solid substrate-room temperature phosphorimetry for the determination of trace protein using ion association complex [Cu(BPY)2]·[(Fin)2] as a phosphorescent probe

Fluorescein (HFin) emitted strong and stable room temperature phosphorescence (RTP) on filter paper after set at 50 °C for 10 min using Li⁺ as the ion perturber. HFin existed as Fin⁻ when the pH value was in the range of 5.45–7.36. Fin⁻ could react with [Cu(BPY)₂]²⁺ (BPY: α,α-bipyridyl) to produce ion association complex [Cu(BPY)₂]²⁺·[(Fin)₂]²⁻, which could enhance the RTP signal of Hfin. In the presence of bovine serum albumin (BSA), the –COOH group of Fin⁻ in the [Cu(BPY)₂]²⁺·[(Fin)₂]²⁻ could react with the –NH₂ group of BSA to form the ion association complex [Cu(BPY)₂]²⁺·[(Fin-BSA)₂]²⁻, which contained –CO–NH– bond. This complex could sharply enhance the RTP signal of Hfin and the ΔI_p was directly proportional to the content of BSA. According to the facts above, a new solid substrate-room temperature phosphorimetry (SS-RTP) for the determination of trace protein had been established using the ion association complex [Cu(BPY)₂]²⁺·[(Fin)₂]²⁻as a phosphorescent probe. This method had wide linear range (0.40 × 10⁻⁹–280 × 10⁻⁹ mg l⁻¹), high sensitivity (the detection limit (LD) was 1.4 × 10⁻¹⁰ mg l⁻¹), good precision (RSD: 3.4–4.9%) and high selectivity (the allowed concentration of coexistent ions or coexistent materials was high). It had been applied to the determination of the content of protein in 10 kinds of real samples, and the result agreed well with pyrocatechol violet-Mo (VI) method (P.V.M.M.), which indicated it had high accuracy. Meanwhile, reaction mechanism for the determination of trace protein with [Cu(BPY)₂]²⁺·[(Fin)₂]²⁻ phosphorescent probe was also discussed. The academic thought of this research could not only be used to develop many kinds of ion association complex phosphorescent probes, but also provided a new way to promote the sensitivity of SS-RTP.     

Electrodeposition of Lu on W and Al electrodes: Electrochemical formation of Lu–Al alloys and oxoacidity reactions of Lu(III) in the eutectic LiCl–KCl

The electrodeposition of lutetium on inert electrodes and the formation of lutetium–aluminium alloys were investigated in the eutectic LiCl–KCl in the temperature range 673–823 K. On a tungsten electrode, the electroreduction of Lu(III) proceeds in a single step and electrocrystalization plays an important role. Experimental current–time transients are in good agreement with theoretical models based on either instantaneous or progressive nucleation with three dimensional growth of the nuclei, depending on the working temperature. The diffusion coefficient of Lu(III) was determined by chronopotentiometry by applying the Sand equation. The activation energy for diffusion was found to be 31.5 ± 1.3 kJ mol⁻¹. Al₃Lu and mixtures of Al₃Lu and Al₂Lu, characterized by XRD analysis and SEM, were obtained from the LiCl–KCl melt containing Lu(III) by potentiostatic electrolysis using an Al electrode. The activity of Lu and the standard Gibbs energies of formation for Al₃Lu were estimated from open-circuit chronopotentiometric measurements. The E–pO²⁻(potential–oxoacidity) diagram for Lu–O stable compounds in LiCl–KCl at 723 K has been constructed by combining theoretical and experimental data. In this way, the apparent standard potential for the Lu(III)/Lu system has been determined by potentiometry. Potentiometric titrations of Lu(III) solutions with oxide donors, using a yttria stabilized zirconia membrane electrode “YSZME” as a pO²⁻ indicator electrode, have shown the stability of LuOCl and Lu₂O₃ in the melt and their solubility products have been determined at 723 K.     

An experimental study on the “sequential order” rules in generalized two-dimensional correlation spectroscopy

Following our theoretical analysis on the “sequential order” rules in generalized two-dimensional (2D) correlation spectroscopy (H. Huang, Anal. Chem. 79 (2007) 8281–8292), an experimental study was conducted to test the “sequential order” rules using the FT-NIR data of poly(3-hydroxybutyrate) (PHB)/poly(l-lactic acid) (PLA) blends under uniaxial elongation and parallel polarization. The local sequential order concept proposed for the generalized two-dimensional (2D) correlation spectroscopy is now more clearly stated; “the intensity change at ν1 occurs predominantly before ν2” means that the starting time of the intensity change at ν1 is prior to that at ν2. It is this local sequential order which reflects the real and intuitive sequential order between two events in generalized situations. It has been found that the integrated/overall sequential order results obtained from the 2D correlation analysis may be contradictory to the intuitive local sequential order. In addition, different integrated/overall sequential orders could be obtained by selection of different sampling intervals from a certain set of experimental data, or choosing different number of the contours for the same sampling interval. These new experimental findings are a perfect reinforcement to our previous theoretical study and have further demonstrated the uncertainty of applying the “sequential order” rules in generalized 2D correlation spectroscopy.     

Self-powdering and nonlinear optical domain structures in ferroelastic β′-Gd2(MoO4)3 crystals formed in glass

Ferroelastic β′-Gd₂(MoO₄)₃, (GMO), crystals are formed through the crystallization of 21.25Gd₂O₃–63.75MoO₃–15B₂O₃ glass (mol%), and two scientific curious phenomena are observed. (1) GMO crystals formed in the crystallization break into small pieces with a triangular prism or pyramid shape having a length of 50–500 μm spontaneously during the crystallizations in the inside of an electric furnace, not during the cooling in air after the crystallization. This phenomenon is called “self-powdering phenomenon during crystallization” in this paper. (2) Each self-powdered GMO crystal grain shows a periodic domain structure with different refractive indices, and a spatially periodic second harmonic generation (SHG) depending on the domain structure is observed. It is proposed from polarized micro-Raman scattering spectra and the azimuthal dependence of second harmonic intensities that GMO crystals are oriented in each crystal grain and the orientation of (MoO₄)²⁻ tetrahedra in GMO crystals changes periodically due to spontaneous strains in ferroelastic GMO crystals.     

Novel M(II)–Hg(II) coordination polymers generated from metal-containing building blocks M(2-pyrazinecarboxylate)2 · (H2O)2 (M=Cu, Ni, Co) and HgCl2

A new class of M(II)–Hg(II) (M=Cu(II), Co(II), Ni(II)) mixed-metal coordination polymers, Cu(2-pyrazinecarboxylate)₂HgCl₂ (4), [Co(2-pyrazinecarboxylate)₂(HgCl₂)₂] · 0.61H₂O (5) and [Ni(2-pyrazinecarboxylate)₂(HgCl₂)₂] · 0.77H₂O (6), have been prepared by self assembly of metal-containing building blocks, M(2-pyrazinecarboxylate)₂ · (H₂O)₂(M=Cu(II), Co(II), Ni(II)), with HgCl₂. Compounds 4–6 were characterized fully by IR, elemental analysis and single crystal X-ray diffraction. Compound 4 crystallized in the monoclinic space group C2/c, with a=17.916(5) Å, b=7.223(2) Å, c=13.335(4) Å, β=128.726(3)°, V=1346.2(6) ų, Z=4. It contains alternating Hg(II) and Cu(II) metal centers that are cross-linked by 2-pyrazinecarboxylate spacers and chlorine co-ligands to generate a unique three-dimensional Hg(II)–Cu(II) mixed metal framework. Compound 5 crystallized in the triclinic space group P , with a=6.3879(7) Å, b=6.6626(8) Å, c=13.2286(15) Å, α=96.339(2)°, β=91.590(2)°, γ=113.462(2)°, V=511.71(10) ų, Z=1. Compound 6 also crystallized in the triclinic space group P , with a=6.3543(8) Å, b=6.6194(8) Å, c=13.2801(16) Å, α=96.449(2)°, β=92.263(2)°, γ=113.541(2)°, V=506.67(11) ų, Z=1. Compounds 5 and 6 are isostructural and in the solid state the Hg(II)M(II)Hg(II) units are connected by Hg₂Cl₂ linkages to produce a novel M(II)–Hg(II) (M=Co(II), Ni(II)) zigzag mixed-metal chain, in which a new type of M–M′–M′–M array was observed. The metal containing building blocks, M(2-pyrazinecarboxylate)₂ · (H₂O)₂ (M=Cu(II), Co(II), Ni(II)), exhibit different connectivities to HgCl₂ depending on the metal cation contained within them.     

Optical properties of perturbed NO 2 − ions in KNO2 doped NaNO2 single crystals

Summary On the basis of high-resolution and time-resolved fluorescence spectra, a model is proposed for the interpretation of the fluorescence lines originating from various perturbed NO ₂ ^– centers situated in the neighbourhood of the K⁺ ion of the NaNO₂:KNO₂ crystal. Since their excited state energies are lower than that of the host, these perturbed NO ₂ ^– ions act as traps for the host singlet exciton. On the assumption that the perturbation giving rise to those traps results from an interaction of the impurity ion K⁺ with its nearest neighbours, the observed position of the energy levels of the various traps can be reconciled with crystal field calculations.     

Complex compounds of tetracycline with WO 4 2− and MoO 4 2− ions. Investigation by pH-metric and conductometric methods

By using pH-metric and conductometric methods it has been found that tetracycline (H₃TC) forms with WO ₄ ^2– and MoO ₄ ^2– ions the following complex compounds: [WO₃HTC]^2–, [WO₃(H₂TC)₂]^2– and [MoO₃(H₂TC)₂]^2–. Stability constants log/gb ₁ ^k =7.86 and log ₁ ^k =7.80 for [WO₃HTC]^2– and [MoO₃HTC]^2–, respectively, have been calculated from pH-metric measurements.     

Determination of sulfur contents of SO3, S2O3 and S based on the electrocatalytic interaction with homogeneous mediator tris(2,2'-bipyridyl)Ru(II)

A sensitive voltammetric method has been developed for the determination of total or single species of sulfur anions containing sulfide, sulfite and thiosulfate. The method is based on the catalytic effect of tris(2,2'-bipyridyl)Ruthenium(II) (Ru(bpy)₂^+ 2) as a homogeneous mediator on the oxidation of those anions at the surface of a glassy carbon electrode. A reversible redox couple of Ru(II)/Ru(III) were observed as a solute in aqueous solution. Cyclic voltammetry study showed that the catalytic current of the system depends on the concentration of the anions. Optimum pH values for voltammetric determination of sulfite, thiosulfate and sulfide has been found to be 5.6, 10.0 and 10.0, respectively. Under the optimized conditions the calibration curves have been obtained linear in the concentration ranges of 0.8–500.0, 0.4–1000.0 and 0.5–5000.0 µmol L^− 1 of SO₃²⁻, S₂O₃²⁻ and S²⁻, respectively. The detection limits have been calculated to be 0.40, 0.17 and 0.33 µmol L^− 1 for SO₃²⁻, S₂O₃²⁻ and S²⁻, respectively. The diffusion coefficients of sulfite and thiosulfate have been estimated using chronoamperometry. The chronoamperometric method also has been used to determine the catalytic rate constant for catalytic reaction of the Ru(bpy)₂^+ 2 with sulfite and thiosulfate. Finally the proposed method has been used for the determination of total sulfur contents in real samples of water and wastewater. Moreover the sulfite content in sugar and sulfur dioxide in air has been determined with satisfactory results.     

Reaction potential map analysis of chemical reactivity—III

Reaction potential maps (RPM) have been introduced as a new tool for the study of molecular reactivity. The equipotential energy maps, which are created on given planes around a molecule, define reaction contours towards specific counter-reagent models and are evaluated by perturbation theory. Since the calculated interaction energy involves electrostatic, polarization, exchange, and charge transfer energies, the RPM's can be used to predict site selectivity in a variety of chemical reactions. We found that the calculated RPM's of the SCN^– anion explained well the experimental observations that it reacts at the S atom with soft electrophiles and at the N atom with hard electrophiles. The difference in reactivity between SCN^– and OCN^– was clearly shown by the RPM's of these anions. The ambident nucleophilic nature of the NO ₂ ^– and the CH₂CHO^– anions was also well represented by their RPM's.     

Zinc(II) Hydration in Aqueous Solution: A Raman Spectroscopic Investigation and An ab initio Molecular Orbital Study of Zinc(II) Water Clusters

Raman spectra of aqueous Zn(II)–perchlorate solutions were measured over broad concentration (0.50–3.54 mol-L^–1) and temperature (25–120°C) ranges. The weak polarized band at 390 cm^–1 and two depolarized modes at 270 and 214 cm^–1 have been assigned to ₁(a _1g), ₂(e _g), and ₅(f _2g) of the zinc–hexaaqua ion. The infrared-active mode at 365 cm^–1 has been assigned to ₃(f _1u). The vibrational analysis of the species [Zn(OH₂) ₂ ⁺ ] was done on the basis of O _h symmetry (OH₂ as point mass). The polarized mode ₁(a _1g)-ZnO₆ has been followed over the full temperature range and band parameters (band maximum, full width at half height, and intensity) have been examined. The position of the ₁(a _1g)-ZnO₆ mode shifts only about 4 cm^–1 to lower frequencies and broadens by about 32 cm^–1 for a 95°C temperature increase. The Raman spectroscopic data suggest that the hexaaqua–Zn(II) ion is thermodynamically stable in perchlorate solution over the temperature and concentration range measured. These findings are in contrast to ZnSO₄ solutions, recently measured by one of us, where sulfate replaces a water molecule of the first hydration sphere. Ab initio geometry optimizations and frequency calculations of [Zn(OH₂) ₂ ⁺ ] were carried out at the Hartree–Fock and second-order Møller–Plesset levels of theory, using various basis sets up to 6-31 + G*. The global minimum structure of the hexaaqua–Zn(II) species corresponds with symmetry T _h. The unscaled vibrational frequencies of the [Zn(OH₂) ₂ ⁺ ] are reported. The unscaled vibrational frequencies of the ZnO₆, unit are lower than the experimental frequencies (ca. 15%), but scaling the frequencies reproduces the measured frequencies. The theoretical binding enthalpy for [Zn(OH₂) ₂ ⁺ ] was calculated and accounts for ca. 66% of the experimental single-ion hydration enthalpy for Zn(II).Ab initio geometry optimizations and frequency calculations are also reported for a [Zn(OH₂) ₂ ¹⁸ ] (Zn[6 + 12]) cluster with 6 water molecules in the first sphere and 12 in the second sphere. The global minimum corresponds with T symmetry. Calculated frequencies of the zinc [6 + 12] cluster correspond well with the observed frequencies in solution. The ₁-ZnO₆ (unscaled) mode occurs at 388 cm^–1 almost in perfect correspondence to the experimental value. The theoretical binding enthalpy for [Zn(OH₂) ₂ ¹⁸ ] was calculated and is very close to the experimental single ion-hydration enthalpy for Zn(II). The water molecules of the first sphere form strong hydrogen bonds with water molecules in the second hydration shell because of the strong polarizing effect of the Zn(II) ion. The importance of the second hydration sphere is discussed.     

Thermodynamic Model for the Solubility of Cr(OH)3(am) in Concentrated NaOH and NaOH–NaNO3 Solutions

The main objective of this study was to develop a thermodynamic model for predicting Cr(III) behavior in concentrated NaOH and in mixed NaOH–NaNO₃ solutions for application to developing effective caustic leaching strategies for high-level nuclear waste sludges. To meet this objective, the solubility of Cr(OH)₃(am) was measured in 0.003 to 10.5 m NaOH, 3.0 m NaOH with NaNO₃ varying from 0.1 to 7.5 m, and 4.6 m NaNO₃ with NaOH varying from 0.1 to 3.5 m at room temperature (22 ± 2°C). A combination of techniques, X-ray absorption spectroscopy (XAS) and absorptive stripping voltammetry analyses, were used to determine the oxidation state and nature of aqueous Cr. A thermodynamic model, based on the Pitzer equations, was developed from the solubility measurements to account for dramatic increases in aqueous Cr with increases in NaOH concentration. The model includes only two aqueous Cr species, Cr(OH) ₄ ^– and Cr₂O₂(OH) ₄ ^– (although the possible presence of a small percentage of higher oligomers at >5.0 m NaOH cannot be discounted) and their ion–interaction parameters with Na⁺. The logarithms of the equilibrium constants for the reactions involving Cr(OH) ₄ ^– [Cr(OH)₃(am) + OH^– Cr(OH) ₄ ^– ] and Cr₂O₂(OH) ₄ ^2– [2Cr(OH)₃(am) + 2OH^– Cr₂O₂(OH) ₄ ^2– + 2H₂O] were determined to be –4.36 ± 0.24 and –5.24 ± 0.24, respectively. This model was further tested and provided close agreement between the observed Cr concentrations in equilibrium with Cr(OH)₃(am) in mixed NaOH–NaNO₃ solutions and with high-level tank sludges leached with and primarily containing NaOH as the major electrolyte.     

Spectrophotometric study of thiocyanato complexation of cobalt(II) and nickel(II) ions in micellar solutions of a nonionic surfactant triton X-100

Complexation of cobalt(II) and nickel(II) with thiocyanate ions has been studied by precise spectrophotometry in aqueous and micellar solutions of a nonionic surfactant Triton X-100 of varying concentrations (20–100 mmol-dm^–3). With regard to cobalt(II), the formation of [Co(NCS)]⁺, [Co(NCS)₂], and [Co(NCS)₄]^2– was established. The formation constant of [Co(NCS)₄]^2–, is increased with increasing concentration of the surfactant, suggesting that the [Co(NCS)₄]^2– complex is formed in micelles. In contrast, the formation constants of [Co(NCS)]⁺ and [Co(NCS)₂] are remained practically unchanged. On the other hand, with nickel(II), the formation of sole [Ni(NCS)]⁺ and [Ni(NCS)₂] was established in both aqueous and micellar solutions examined, their formation constants being also remained unchanged. Interestingly, no higher complex was confirmed in the nickel(II) system, unlike cobalt(II). The unusual affinity of the [Co(NCS)₄]^2– complex with micelles will be discussed from thermodynamic and structural points of view.     

Chromium(III) Hydroxide Solubility in The Aqueous Na+-OH?-H2PO?4-HPO2?4-PO3?4-H2O System: A Thermodynamic Model

Chromium(III)-phosphate reactions are expected to be important in managing high-level radioactive wastes stored in tanks at many DOE sites. Extensive studies on the solubility of amorphous Cr(III) solids in a wide range of pH (2.8–14) and phosphate concentrations (10^–4 to 1.0 m) at room temperature (22±2)°C were carried out to obtain reliable thermodynamic data for important Cr(III)-phosphate reactions. A combination of techniques (XRD, XANES, EXAFS, Raman spectroscopy, total chemical composition, and thermodynamic analyses of solubility data) was used to characterize solid and aqueous species. Contrary to the data recently reported in the literature,⁽¹⁾ only a limited number of aqueous species [Cr(OH)₃H₂PO^–₄, Cr(OH)₃(H₂PO₄)^2–₂), and Cr(OH)₃HPO^2–₄] with up to about four orders of magnitude lower values for the formation constants of these species are required to explain Cr(III)-phosphate reactions in a wide range of pH and phosphate concentrations. The log K^o values of reactions involving these species [Cr(OH)₃(aq)+H₂PO^–₄⇌Cr(OH)₃H₂PO^–₄; Cr(OH)₃(aq)+2H₂PO^–₄⇌Cr(OH)₃(H₂PO₄)^2–₂; Cr(OH)₃(aq)+HPO^2–₄⇌Cr(OH)₃HPO^2–₄] were found to be 2.78±0.3, 3.48±0.3, and 1.97±0.3, respectively.     

Theoretical Evidence of Aromaticity in X3 − (X = B, Al, Ga) Species

We investigated the electronic structure and chemical bonding of the B₃ ^–, Al₃ ^–, and Ga₃ ^– anions, and the gas phase NaB₃, NaAl₃, and NaGa₃ molecules. We found that the ground state of the neutral gas phase salts contains an equilateral triangular anion interacting with a Na⁺ cation. The B₃ ^–, Al₃ ^–, and Ga₃ ^– anions possess two delocalized electrons and are found to be aromatic. The triangular anions have been shown to be related to recently synthesized organometallic compound containing an aromatic -Ga₃ ^2– unit, but they are differ from them by four valence electrons. The reason for earlier appearance of the -orbital in the B₃ ^–, Al₃ ^–, and Ga₃ ^– anions is discussed.     

Theoretical calculations of95Mo-NMR chemical shifts for compounds [MoO4−n S n ]2−

Summary Theoretical calculation of⁹⁵Mo-NMR chemical shifts for [MoO_4–n S _n ]^2– (n=0–4) compounds is reported here for the first time on the basis of Fenske-Hall method and Sum-Over-State (SOS) perturbation theory. A systematic decrease in shielding of⁹⁵Mo nuclei with increase of number of sulfur in [MoO_4–n S _n ]^2–, which is observed experimentally, can be reasonably explained by our calculation. A good linear relationship between chemical shifts of calculation and experiment is obtained. The electronic structure and bonding in these compounds are also discussed.Supported by Nature Science Foundation of China     

Electron spin resonance spectra observed in the course of grafting iron carbonyls on sodium-Y zeolites

The adsorption and/or decomposition pathway of Fe₂(CO)₉ or Fe₃(CO)₁₂ on hydrated or dehydrated NaY zeolites has been studied by an ESR technique. The adsorption resulted in the formation of three paramagnetic species withg _iso=2.0450, 2.0378, and 2.0016, which were attributable to Fe₃(CO)₁₁ ^–, Fe₂(CO)₈ ^–, and Fe(CO)₄ ^– anion radicals, respectively. These radicals have been suggested as intermediates in the formation of HFe₃(CO)₁₁ ^– on the hydrated NaY zeolite and Fe₃(CO)₁₂ on the dehydrated NaY zeolite.     

A kinetic fluorometric method for the determination of nucleic acids using a ternary equilibrium system of nucleic acids—iron (III) tetracarboxy phthalocyanine-poly-lysine coupled with the oxidation reaction between hydrogen peroxide and dl-tyrosine

Using the oxidation reaction between hydrogen peroxide and dl-tyrosine as fluorescence indication, the evident tuning effect of nucleic acids on catalytic activity of mimetic enzyme iron (III) tetracarboxy phthalocyanine (FeC₄Pc) in the presence of poly-lysine was observed and studied. The oxidation reaction between hydrogen peroxide and dl-tyrosine with FeC₄Pc as catalyst gave an intensively fluorescent compound, which has an excitation wavelength of 325 nm and an emission wavelength of 418 nm. The fluorescence was quenched by a proper concentration of poly-lysine due to its association with FeC₄Pc and consequently the descent of the catalytic activity of FeC₄Pc, but recovered by addition of nucleic acids. Under optimal conditions, the recovered fluorescence is proportional to the concentration of nucleic acids. Based on the fact, a kinetic fluorescent method was developed for the determination of nucleic acids. The calibration graphs are linear over the range 10-2000 ng/mL both for fish sperm DNA (FS DNA) and calf thymus DNA (CT DNA). The corresponding detection limits are 1.04 ng/mL for FS DNA and 1.18 ng/mL for CT DNA, respectively. Four synthetic and three real nucleic acid samples were determined with satisfactory results.     

Synthesis of Schiff bases and benzylamino derivatives containing [1-B<Subscript>10</Subscript>H<Subscript>9</Subscript>NH<Subscript>3</Subscript>]<Superscript>−</Superscript> anion

Reactions of an amino derivative of the closo-decaborate anion [1-B₁₀H₉NH₃]^– with aromatic aldehydes afforded Schiff bases [1-B₁₀H₉NH=CHAr]^– (Ar=Ph, C₆H₄-2-OMe, or C₆H₄-4-NHCOMe). The reduction of the latter with sodium borohydride gave the corresponding benzylamino derivatives [1-B₁₀H₉NH₂CH₂Ar]^–.Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 2004–2007, September, 2004.