Harmonic mode locking by synchronous optical pumping of a saturable absorber with the residual pump

An actively mode-locked fiber laser is demonstrated, for the first time to our knowledge, by modulation of a saturable-absorber mirror with the light used simultaneously for pumping the gain fiber. Stabilization of a harmonically passive mode-locked fiber laser that generates soliton pulses of 550-fs duration is obtained with this technique. The results indicate a reduction of supermode suppression by more than 55 dB. The timing jitter is improved by 9 dB.     

脉冲半导体激光器时基脉冲的实验对比测量

以脉冲半导体激光器为例，对3种测量激光脉冲时基抖动技术进行了对比实验。这3种测量技术分别是：基于宽带取样示波器的时基抖动测量技术;基于相位比较检相器的相位噪声测量技术和基于频谱仪的谐波频谱分析技术。对比研究发现：基于宽带取样示波器的时基抖动测量技术适用于脉冲宽带及脉冲抖动较大的光脉冲；基于频谱仪的谐波频谱分析技术适用于低重复频率光脉冲的抖动测量；基于相位比较检相器的相位噪声技术测量精度高、动态范围大、结果可靠，对于高重复频率的超短光脉冲，建议选用相位噪声测量技术测量激光脉冲的时基抖动。     

超导纳米线单光子探测系统的时间抖动

超导纳米线单光子探测(SNSPD)器件具有较低的时间抖动特性,可以实现低误码率的QKD和高精度的激光测距。文中对超导纳米线单光子探测系统的时间抖动进行了详细的分析和测量,分析了SNSPD系统各部分对系统抖动的贡献。使用时间相关的单光子计数技术(TCSPC)和示波器的抖动分析软件,分别测量了SNSPD系统的时间抖动,比较了两种方法的优劣。在两种测量方法下,系统总的时间抖动分别约为42ps和31ps,计算后得到单光子探测器件的抖动约为25ps。发现放大器的性能对系统时间抖动影响明显。通过使用不同放大器比较分析了测量得到的时间抖动。     

Pulse timing-jitter reduction by incoherent addition

A new technique is proposed and demonstrated for reducing the timing jitter of a mode-locked laser diode by use of fiber-optic interferometers with an optical path difference much longer than the laser's coherence length. At the output of the interferometer the intensities of the two pulse trains are incoherently added, giving rise to the cancellation of timing noise at specific Fourier frequencies determined by the path difference. The timing jitter of pulse trains emitted by a 19.444-GHz mode-locked laser is reduced to 0.991 and 0.874 ps for 100-kHz-18-MHz bandwidth after the pulse trains pass through a cascaded Mach-Zehnder and a ring interferometer, respectively.     

Timing noise measurement of 320 GHz optical pulses using an improved optoelectronic harmonic mixer

An improved optoelectronic harmonic mixer (OEHM) has been employed for measuring the timing noise of 320 GHz optical pulses that are generated from a 160 GHz mode-locked laser diode by the temporal Talbot effect. The OEHM makes use of a low-drive voltage LiNbO3 modulator and a W-band unitraveling carrier photodiode for converting the 320 GHz pulse intensity into a low-frequency electrical signal. The time domain demodulation technique has been used for the precise evaluation of phase noise power spectral density. The rms timing jitter has been estimated to be 311 fs for the 10 Hz-18.6 MHz bandwidth.     

Ultralow-jitter and -amplitude-noise semiconductor-based actively mode-locked laser

We report a semiconductor-based, low-noise, 10.24 GHz actively mode-locked laser with 4.65 fs of relative timing jitter and a 0.0365% amplitude fluctuation (1 Hz to 100 MHz) of the optical pulse train. The keys to obtaining this result were the laser's high optical power and the low phase noise of the rf source used to mode lock the laser. The low phase noise of the rf source not only improves the absolute and relative timing jitter of the laser, but also prevents coupling of the rf source phase noise to the pulse amplitude fluctuations by the mode-locked laser.     

Pulse-Width Jitter Measurement for Laser Diode Pulses

Theoretical analysis and experimental measurement of pulse-width fitter of diode laser pulses are presented. The expression of pulse power spectra with all amplitude jitter, timing jitter and pulse-width jitter is deduced. The power spectra with and without pulse-width fitter are that the pulse-width jitter will contribute considerably numerically simulated. The simulation results indicate noise to the pulse power spectrum while the product of pulse width and angular frequency is larger than 1. The experimental measurement of pulse-width fitter of a gain-switched Fabry-Perot laser diode with 2.4 GHz repetition rate is also reported. In comparison of the noise power spectra of the first, fourth and seventh harmonics of the pulse repetition rate, 2.3ps pulse-width jitter is obtained.     

基于阿秒抖动光纤锁模激光器的时钟同步

光纤锁模激光器结构简单, 运转稳定, 且输出的超短脉冲序列具有极高的时钟稳定性, 在抽运探测、脉冲相干合成等要求高精度时钟同步的前沿领域有着广阔的应用前景. 本文通过激光器腔内的电光调制器进行反馈控制, 实现了两台光纤锁模激光器之间的紧密时钟信号同步; 并且通过平衡光学互相关方法, 对残余的时钟误差信号进行了测量, 分辨率达到了13 as. 通过优化激光器的腔内动力学过程及反馈环路的参数, 在[1 Hz, 10 MHz]的积分区间内得到了109 as的残余时钟误差, 对应单台激光器的平均时间抖动为77 as.     

光阴极微波电子枪中时间抖动对粒子动力学的影响

对光阴极微波电子枪粒子束性能起决定性影响的因素之一就是激光脉冲相对加速微波相位的时间抖动. 对这种时间抖动的测量和反馈控制进行了理论和实验分析, 并对时间抖动对束流品质的影响进行了模拟研究, 得到了利用锁相环回路降低激光脉冲相位噪声的实验经验, 为光阴极微波电子枪中激光与微波相位同步问题提出了解决方法.     

Measurement of Timing Jitter in Wavelength Tunable Femtosecond Soliton Pulses

We investigated the root mean square (RMS) timing jitter and RMS intensity noise of the wavelength tunable femtosecond soliton pulses using the technique of radio-frequency spectrum analysis. We obtained interesting results that the generated solitons have almost constant RMS timing jitter and RMS intensity noise of approximately 410 fs and 0.03% in the wavelength region of 1600-1750 nm. It is therefore believed that the magnitudes of the jitter and noise are not greatly increased in the process of wavelength tunable soliton pulse generation. The wavelength tunable soliton pulse is confirmed to be stable and useful for practical applications.     

Time-resolved chirp measurement for 100GBaud test systems using an ideal frequency discriminator

In this paper we present multi-channel chirp measurements of wide-band sources, using a programmable Fourier-domain optical processor (FDOP) as a near-perfect linear frequency discriminator element followed by a fast photodiode and electrical sampling oscilloscope. The electric field of a 10.7 Gbit/s phase-encoded data source and a directly modulated laser diode are simultaneously interrogated with this measurement system. The constellation diagram of the phase-encoded data source is demonstrated, and a comparison with another phase-sensitive measurement technique is performed. Additionally, an extension to this technique is demonstrated in which the time-resolved chirp of a picosecond-duration mode-locked laser diode with a 260 GHz spectral bandwidth is characterised using the FDOP and a high-bandwidth optical sampling oscilloscope. This measurement ensemble has sufficient temporal resolution to characterise random or repetitive data signals up to 100GBaud.     

增益开关半导体激光器在外光注入下脉冲抖动的实验研究

采用增益开关半导体激光器作为注入种子光源来降低另一个增益开关DFB或Fabry-Perot（FP ）半导体激光器的脉冲抖动.相位噪声测量技术表明：增益开关FP激光器在外部脉冲光注入 下，激光脉冲抖动（均方值）由1.2ps降低至830fs；增益开关DFB半导体激光器在外脉冲注 入下，脉冲抖动由12ps降低至1.8ps. 关键词： 半导体激光器 光脉冲产生 时间抖动 光子注入     

Equalization-enhanced phase noise induced timing jitter

In electronic digital signal processing based optical communication systems, digital equalization for chromatic dispersion interacts with local oscillator phase noise to produce equalization-enhanced phase noise (EEPN). In addition to both phase and intensity noises, EEPN also induces timing jitter to the equalized signal. For a 100?Gbit/s quadrature-phase-shift keying signal with laser linewidth of 300?kHz, the timing jitter is up to 20% of the symbol interval for a transmission distance of 1500?km.     

Measurement of pulse width and amplitude jitter noises of gigahertz optical pulse trains by time-domain demodulation

We propose a technique for measuring both pulse width and amplitude jitter noises of high-repetition-rate optical pulse trains and the cross correlation between these noises as well. The technique is based on time-domain amplitude demodulation of three harmonic components of the detected pulse train. We applied this technique to characterize noises of a gigahertz optical pulse train generated by an actively mode-locked Er-doped fiber laser. Correlation between pulse width jitter and pulse amplitude jitter was observed at low frequencies in this laser. Unlike relaxation oscillation noise, low-frequency noise is free from pulse energy jitter. Owing to its ability to measure pulse width jitter in addition to amplitude and phase jitters, this technique is of great interest for characterizing noises of a wide variety of optical pulse train sources.     

Jitter Characterization in Optical Preamplifier Direct Detection System

１ＩｎｔｒｏｄｕｃｔｉｏｎＷｉｔｈｔｈｅｒｅｃｅｎｔａｄｖｅｎｔａｎｄｕｔｉｌｉｚａｔｉｏｎｏｆｖｅｒｙｈｉｇｈｂｉｔｒａｔｅｓｙｓｔｅｍｓｕｓｉｎｇｌａｒｇｅｄｉｓｔａｎｃｅｓｂｅｔｗｅｅｎｒｅｐｅａｔｅｒｓａｎｄｓｉｎｇｌｅｍｏｄｅｏｐｔｉｃａ...     

激光溅射法在射频离子阱中产生和囚禁低能多电荷离子

Timing jitter performance in binary optical preamplifier direct detection system is investigated through both the analytical method and computer simulation method. The presented analytical method is based on the moment generating function (MGF) and has taken into account the influence of optical filter on the optical pulse shape. It can be used to optimize the timing jitter performance for linear clock extraction scheme for any type of optical filter and narrow bandpass electrical filter. The presented computer simulation method is capable of dealing with any nonlinear clock extraction scheme and also the impact of laser phase noise on timing jitter performance.     

Synchronization of mode-locked femtosecond lasers through a fiber link

Two mode-locked femtosecond fiber lasers, connected via a 7 km fiber link, are synchronized to an rms timing jitter of 19 fs, observed over the entire Nyquist bandwidth (half of the 93 MHz repetition frequency). This result is achieved in two steps. First, active cancellation of the fiber-transmission noise reduces timing jitter caused by path length fluctuations to a record level of 16 fs. Second, using a wide bandwidth interactivity actuator, the slave laser is synchronized to the incoming stable pulse train from the reference laser to within 10 fs. These results are confirmed by an optical cross-correlation measurement performed independently of the feedback loop operated in the microwave domain.     

重复频率可调谐的超低抖动光窄脉冲源的研究

提出了一种新型的基于光电振荡器的重复频率可调谐的超低抖动光窄脉冲源. 光电振荡器系统可以产生超低相位噪声的微波信号; 被该信号调制的直调光经过两次相位调制之后, 使光脉冲的啁啾增强; 再通过一段色散补偿光纤, 光脉冲被进一步压窄. 实验中使用YIG可调滤波器, 可以得到8–12 GHz内步进为200 MHz的可调谐微波信号, 因此光脉冲的重复频率具有可调谐性. 当微波信号即脉冲重复频率为9.6 GHz时, 测得脉冲宽度为3.7 ps, 相位噪声为-130.1 dBc/Hz@10 kHz. 由此得出光脉冲的瞬时抖动为60.1 fs (100 Hz–1 MHz), 因此该方案产生的光窄脉冲源具有超低的抖动.     

Generation of Low Jitter Laser Diode Pulse With External Pulse Injection

One gain-switched laser diode(LD) was used as external injection seeding source, to reduce the timing jitter of another gain-switched LD, This technique can generate low jitter, frequency-free and wavelength tunable laser pulse.     

Quantum-mechanical calculation of frequency and timing jitter for optical pulses in dispersive fibers with losses

The noise of spontaneous emission of a short pulse propagating in a fiber with losses is translated into frequency jitter, causing exponential growth of jitter. This is in contrast with a classical treatment in which the jitter remains constant. Absorption-induced frequency noise continuously affects timing through group-velocity dispersion, and the accumulated timing jitter is therefore always larger than when it is evaluated classically. This numerical discrepancy is demonstrated to be considerable and points to the importance of including quantum effects in estimations of noise in high-bit-rate communications.