光敏共聚物P(St/VM-co-MA)自组装胶体粒子及其性能

以苯乙烯类光敏单体7-(4-乙烯基苄氧基)-4-甲基香豆素(VM)、苯乙烯(St)、马来酸酐(MA)为共聚单体,采用自由基聚合法制备了光敏性双亲共聚物P(St/VM-co-MA).在选择性溶剂(N,N-二甲基甲酰胺(DMF)/H2O)中对P(St/VM-co-MA)进行自组装,用透射电镜(TEM)和动态激光光散射(DLS)表征了自组装胶体粒子的形态、粒径大小及其分布.利用紫外光照使胶体粒子中香豆素基元发生光二聚反应,形成交联胶体粒子,并用紫外-可见光分光光度计(UV-Vis)跟踪其交联过程.用DLS研究了交联和未经交联胶体粒子的粒径和结构稳定性,用激光扫描共聚焦显微镜(LSCM)和光学显微镜考察了胶体粒子的乳化、包覆性能.结果表明:交联和未经交联胶体粒子均具有乳化性,且在乳化过程中可实现对油溶性染料的包覆.胶体粒子交联后,粒径有所减小,结构稳定性、乳化性能、包覆性能均有所提高.     

含氨基、羟基丙烯酸乳液聚合的稳定性

采用间歇及半连续乳液聚合方式,以过硫酸铵/亚硫酸钠为引发体系,合成了甲基丙烯酸甲酯/丙烯酸丁酯/甲基丙烯酸羟乙酯/甲基丙烯酸二氨基乙酯四元共聚物胶乳.系统研究了乳化剂种类和浓度、聚合温度、乳化单体进料方式及进料速率对聚合过程稳定性的影响.聚合温度降低,乳化单体进料速度减慢有利于聚合过程的稳定,采用种子半连续聚合方式比间歇聚合过程更稳定,乳化剂浓度的增加有利于聚合稳定性的提高和乳胶粒子的均匀化.     

肉桂酸改性透明质酸颗粒乳化剂的制备及性能

将具有紫外吸收性能的单体肉桂酸(CA)引入天然大分子透明质酸(HA)中,制得疏水性改性HA(HA-CA),然后在二甲亚砜与水的混合溶剂中自组装制备HA-CA胶体粒子,并以之为颗粒乳化剂稳定油水界面制备Pickering乳液。通过紫外、核磁、纳米粒度仪、透射电镜、光学显微镜等方法对HA-CA、HA-CA胶体粒子及其所稳定的乳液进行表征。结果表明,HA-CA可以在选择性溶剂中自组装形成粒径约为95nm的球形胶体粒子;所得的HA-CA胶体粒子可以有效地稳定油/水界面,制备水包油(O/W)型的Pickering乳液,且所得乳液具有良好的耐盐性和细胞相容性;此外该胶体粒子可稳定多种油/水体系,具有一定普适性。     

探索光敏性共聚物P(St/CS-alt-MA)的自组装及其乳化行为

以苯乙烯(St)、马来酸酐(MA)、香豆素苯乙烯醚化物(CS)为单体, 通过自由基溶液聚合合成了双亲性交替共聚物P(St/CS-alt-MA), 用凝胶渗透色谱、核磁共振等对聚合物结构进行表征, 并对其溶液自组装及组装体的乳化性进行了研究. 结果表明双亲性P(St/CS-alt-MA)可以在选择性溶剂中进行自组装形成马来酸酐单元为亲水微区、CS与苯乙烯单元为疏水微区的胶体粒子, 用紫外分光光度计, XPS, TEM研究了聚合物胶体粒子性质, 结果显示, P(St/CS-alt-MA)在水溶液中可以形成两亲性聚合物胶体粒子, 亲水单元在胶粒表面富集, 该两亲性聚合物胶体粒子具有良好的乳化性能.     

光敏性无规共聚物P(FA_2C-co-AA)的自组装及乳化性能

光敏性单体ε-己内酯改性丙烯酸酯肉桂酸酯(FA2C)与丙烯酸(AA)在偶氮二异丁腈(AIBN)的引发作用下,于N,N-二甲基甲酰胺(DMF)中发生自由基共聚反应,制备了具有光敏性的双亲无规共聚物P(FA2C-co-AA)。以红外光谱、凝胶渗透色谱、差示扫描量热和紫外光谱等分析测试手段对共聚产物进行了表征。P(FA2C-co-AA)在选择性溶剂DMF水溶液中自组装得到纳米粒径的胶体粒子。用紫外光引发胶体粒子内双键发生光交联反应,得到稳定的胶体粒子,并用动态激光光散射(DLS)表征了胶体粒子交联前后的粒径变化。结果表明:该胶体粒子具有良好的乳化性能。     

pH响应性含氟三嵌段共聚物的制备及性质研究

以苄醇(BzOH)与氢化钾(KH)反应形成的氧阴离子作为引发剂, 依次引发甲基丙烯酸-2-(N,N-二甲氨基)乙酯(DMAEMA, 简称DMA)、甲基丙烯酸-2-(N,N-二乙氨基)乙酯(DEAEMA, 简称DEA)和甲基丙烯酸-(2,2,3,3,4,4,5,5-八氟)戊酯(OFPMA)进行氧阴离子聚合, 获得含氟三嵌段共聚物PDMA-b-PDEA-b-POFPMA和PDEA-b-PDMA-b-POFPMA. 共聚物的化学结构可以通过不同单体的加料顺序和各种单体的投料量加以控制. 通过¹H NMR, ¹⁹F NMR和GPC测试, 研究聚合物的结构、分子量及分子量分布. 利用表面张力、荧光探针法、Zeta电位和透射电镜等测试方法, 研究共聚物在不同pH值的水溶液中的聚集行为.     

基于透明质酸生物活性自组装胶体粒子制备及乳化性能

用透明质酸(HA)和溶菌酶(Lys)静电自组装制备胶体粒子.研究了溶菌酶和透明质酸的质量比(WR)对胶体粒子性质的影响,得到最佳质量比下的胶体粒子.用纳米粒度仪和透射电镜对胶体粒子的尺寸和形貌进行表征.结果显示,形成的胶体粒子为球形结构,粒径约250 nm.此胶体粒子可二次组装在油水界面稳定水包油型类凝胶Pickeri...     

pH敏感纳米凝胶的制备及其在siRNA转染中的应用

通过分散聚合的方法,以改性了双键的葡聚糖(Dex-AA)作为交联剂,甲基丙烯酸二甲氨基乙酯(DMAEMA)作为单体,过硫酸铵(APS)和四甲基乙二胺(TEMED)分别作为引发剂和助引发剂,合成了不同交联度的、具有pH敏感内吞增强作用的葡聚糖纳米凝胶(DD-NGs),并测试了其复合siRNA进行转染的能力.实验结果表明,该纳米凝胶表面带有正电荷,具有较好的担载siRNA进入肿瘤细胞并沉默基因的能力,且具有pH响应粒径变化的性质.在pH=7.4的体液环境中,纳米凝胶与基因的复合物粒子较小;在肿瘤酸性(pH=6.8)条件下,纳米凝胶与基因的复合物粒子变大,显著地增强了肿瘤细胞对纳米凝胶与基因复合物的内吞.     

原子转移自由基聚合制备聚甲基丙烯酸(N-羟基琥珀酰亚胺)酯及其嵌段共聚物

以CuCl/N-苄基-2-吡啶基甲亚胺(NBPM)/2-溴异丁酸乙酯(EBrIB)作为引发催化体系,使甲基丙烯酸(N-羟基琥珀酰亚胺)酯(MASI)进行ATRP聚合,得到的聚甲基丙烯酸(N-羟基琥珀酰亚胺)酯(PMASI)具有较高的单体转化率(90%)、较窄PDI(~1.10)和较高的分子量。在整个聚合过程中,较强的C—Cl键仍使聚合物的端基保持活性,有利于与第二单体甲基丙烯酸(N,N-二甲氨基)乙酯(DMAEMA)嵌段共聚形成结构明确的嵌段共聚物P(MASI-b-DMAEMA)。当MASI的链长较短时,P(DMAEMA40-b-MASI16)具有水溶性并可自组装成直径均匀的核-壳型微胶束,间接证明了聚合过程的可控特征。     

水相光引发聚合诱导自组装制备CO_2响应性聚合物囊泡

本文以聚甲基丙烯酸甘油酯(PGMA)作为大分子RAFT试剂,甲基丙烯酸羟丙酯(HPMA)和甲基丙烯酸-2-(二甲氨基)乙酯(DMAEMA)作为单体,在室温下通过水相光引发聚合诱导自组装制备CO2响应聚合物囊泡。动力学研究表明聚合在可见光(405nm,0.5 mW/cm2)照射10min后,转化率可以达到100%。文中还探讨了DMAEMA对于聚合反应的影响。通过视觉观察、透射电子显微镜(TEM)以及核磁共振(NMR)对聚合物囊泡的二氧化碳响应特性进行了研究。     

PMMA colloid particles armored by clay layers with PDMAEMA polymer brushes

Poly[2‐(dimethylamino) ethyl methacrylate] (PDMAEMA) brushes on the surfaces of clay layers were prepared by in situ free‐radical polymerization. Poly (methyl methacrylate) (PMMA) colloid particles stabilized and initiated by clay layers with PDMAEMA polymer brushes were prepared by Pickering emulsion polymerization. Transmission electron microscopy was used to characterize the structure and morphology of the colloid particles. The X‐ray diffraction (XRD) results indicated that the intercalated structures of the clay layers were almost destroyed in Pickering emulsion polymerization, and clay layers with exfoliated structures were created. The surface of the colloid particles was analyzed by using X‐ray photoelectron spectroscopy (XPS). The XPS results provide direct evidence that the clay layers with PDMAEMA chains cover the PMMA colloid particles. © 2008 Wiley Periodicals, Inc. JPolym Sci Part A: Polym Chem 46: 2632–2639, 2008     

In situ synthesis of polystyrene/nano-CdSe core/shell microspheres in aqueous solution at room temperature

Polystyrene/nano-CdSe (PS/CdSe) core/shell microspheres were synthesized via in situ soap-free emulsion polymerization using various functional monomers such as 2-(dimethylamino)ethyl methacrylate, 1-vinylimidazole, 2-vinylpridine, and 4-vinylpridine. They were co-polymerized with styrene monomer and provided the location for coordinating with Cd²⁺ ions on the PS particle surfaces. Then, we used an alkaline selenium solution as a selenium source. Reaction of the alkaline selenium solution with the previous emulsion produced nanocrystalline CdSe onto the surface of PS particles at room temperature under atmospheric pressure. The different kinds of functional monomers and the amount of both Cd²⁺ ion and functional monomer were playing important roles to obtain stable and uniform morphologies of CdSe particles. Morphological observations were carried out by both scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Through the SEM and TEM microphotographs, we could confirm the formation of PS/nano-CdSe composite particles. Ultraviolet–visible absorption measurement indicated the quantum dot effect in the resulted PS/nano-CdSe core/shell microspheres.     

Study on controlling particle growth in seeded emulsion polymerization with regulated coagulation based on the electrostatic interactions

30wt% solid content, anionic seed copolymer latex P(methyl acrylate-co-methyl methacrylate) was prepared by conventional emulsion polymerization, and then the seeded emulsion polymerization was carried out accompanied with the electrostatic coagulation during the reaction in the presence of counter-ion species, such as cationic monomer and initiator. In this article, effects of cationic monomer (dimethyl aminoethyl methacrylate, DM) content, secondary monomer to seed polymer weight ratio, M/P and amount of emulsifier (polyoxyethylene nonylphenylether with 23 units of ethylene oxide, PEO23) were investigated on the effective particle growth and the stability of final latex. With 10wt% DM in monomer, M/P ratio at 2.0 were recommended. An optimal policy for handling the emulsifier content without the nucleation of secondary particles while achieving the controlled coagulative growth was proposed from the observations of polymer yield and particle size during the polymerization.     

Preparation of micrometer-sized, monodisperse "janus" composite polymer particles having temperature-sensitive polymer brushes at half of the surface by seeded atom transfer radical polymerization

Micrometer-sized, monodisperse polystyrene (PS)/poly[methyl methacrylate-(chloromethyl)styrene] [P(MMA-CMS)] composite particles having hemispherical structure were prepared by solvent evaporation from toluene droplets containing dissolved PS and P(MMA-CMS) dispersed in aqueous solution, which had been prepared using the membrane method. The formation of hemispherical ("Janus") morphology by phase separation between the PS and the P(MMA-CMS) was confirmed by both optical and electron microscopy. Atom transfer radical polymerization (ATRP) of 2-(dimethylamino)ethyl methacrylate (DM) was subsequently carried out in the presence of hemispherical PS/P(MMA-CMS) composite particles in an aqueous dispersed system. After polymerization, the morphology of the particles changed from spherical to "mushroom" shape as observed by scanning electron microscopy, indicating that DM polymerized inside or on the surface of half [P(MMA-CMS) phase] of the particles. 1H NMR spectra were consistent with chloromethyl functional groups in P(MMA-CMS) operating as ATRP initiators in the DM polymerization.     

Synthesis of polymeric core–shell particles using surface‐initiated living free‐radical polymerization

An easy and novel approach to the synthesis of functionalized nanostructured polymeric particles is reported. The surfactant‐free emulsion polymerization of methyl methacrylate in the presence of the crosslinking reagent 2‐ethyl‐2‐(hydroxy methyl)‐1,3‐propanediol trimethacrylate was used to in situ crosslink colloid micelles to produce stable, crosslinked polymeric particles (diameter size ～ 100–300 nm). A functionalized methacrylate monomer, 2‐methacryloxyethyl‐2′‐bromoisobutyrate, containing a dormant atom transfer radical polymerization (ATRP) living free‐radical initiator, which is termed an inimer (initiator/monomer), was added to the solution during the polymerization to functionalize the surface of the particles with ATRP initiator groups. The surface‐initiated ATRP of different monomers was then carried out to produce core–shell‐type polymeric nanostructures. This versatile technique can be easily employed for the design of a wide variety of polymeric shells surrounding a crosslinked core while keeping good control over the sizes of the nanostructures. The particles were characterized with scanning electron microscopy, transmission electron microscopy, optical microscopy, dynamic light scattering, and Raman spectroscopy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1575–1584, 2007     

茂基稀土胺化物的合成及其作为单组份引发剂引发极 性单体聚合的研究

综述了近年来我们在茂基稀土胺化物的合成、结构及其催化极性单体,包括甲基丙烯酸甲酯、甲基丙烯酸N,N-二甲氮乙酯、异氰酸苯酯的聚合和ε-己内酯开环聚合的研究结果。讨论了茂基稀土胺化物的结构与催化活性的关系,提出了可能的聚合反应机理。     

Synthesis and polymerization of phosphorus‐containing acrylates

Novel phosphorus‐containing acrylate monomers were synthesized by two different routes. The first involved the reaction of ethyl α‐chloromethyl acrylate and t‐butyl α‐bromomethyl acrylate with diethylphosphonoacetic acid. The monomers were bulk‐ and solution‐polymerized at 56–64 °C with 2,2′‐azobisisobutyronitrile. The ethyl ester monomer showed a high crosslinking tendency under these conditions. The selective hydrolysis of the ethyl ester phosphonic ester compound was carried out with trimethylsilyl bromide, producing a phosphonic acid monomer. In the second route, ethyl α‐hydroxymethyl acrylate and t‐butyl α‐hydroxymethyl acrylate were reacted with diethylchlorophosphate. The bulk homopolymerization and copolymerization of these monomers with methyl methacrylate and 2,2′‐azobisisobutyronitrile gave soluble polymers. The attempted hydrolysis of the monomers was unsuccessful because of the loss of the diethylphosphate group. The relative reactivities of the monomers in the photopolymerizations were also compared. The ethyl α‐hydroxymethyl acrylate/diethylphosphonic acid monomer showed higher reactivity than the other monomers, which may explain the crosslinking during the polymerization of this monomer. The reactivities of other derivatives were similar, but the rates of polymerization were slow in comparison with those of methyl methacrylate. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3221–3231, 2002     

Vinyl polymerization. 410. Polymerizations of vinyl monomers initiated by poly(styrene-co-sodium acrylate) or poly(methyl methacrylate-co-sodium methacrylate). A verification of the concept of hard and soft hydrophobic areas and monomers

It was found that the copolymers of sodium acrylate (AA-Na) with styrene (St) and of sodium methacrylate (MAA-Na) with methyl methacrylate (MMA) could polymerize vinyl monomers in an aqueous phase without the usual initiator. Interestingly, there was a definite composition of the copolymer for the polymerization of a given monomer; for example, when poly(St-co-AA-Na) was used, St, MMA, vinyl acetate, ethyl acrylate, methyl acrylate, and acrylonitrile were polymerized by the copolymer having mole ratios of AA-Na:St of 0.61:0.29, 0.47:0.53, 0.38:0.62, 0.30:0.70, 0.24:0.76, and 1.00:0, respectively. The copolymers of various compositions can form hydrophobic areas (HAs) in the water phase. As has been repeatedly reported, the polymerization proceeds in the HAs, and the following new hypothesis was recently proposed that the hard (the less hydrophilic) HA prefers to incorporate the hard monomer and the soft (the less hydrophobic or the more hydrophilic) HA prefers to incorporate the soft monomer. The results mentioned above support this hypothesis.     

Cross-linking of cationic block copolymer micelles by silica deposition

Diblock copolymer micelles comprising cationic poly(2-(dimethylamino)ethyl methacrylate) (PDMA) coronas and hydrophobic poly(2-(diisopropylamino)ethyl methacrylate) (PDPA) cores are used as nanosized templates for the deposition of silica from aqueous solution at pH 7.2 and 20 degrees C. Both noncross-linked and shell cross-linked (SCL) micelles can be coated with silica without loss of colloid stability. Under optimized conditions, the silica deposition is confined to the partially quaternized cationic PDMA chains, leading to hybrid copolymer-silica particles of around 35 nm diameter with well-defined core-shell morphologies. 1H NMR studies confirmed that the PDPA cores of these copolymer-silica particles became protonated at low pH and deprotonated at high pH, which suggests possible encapsulation and controlled release applications. Moreover, in situ silica deposition effectively stabilizes the PDPA-PDMA micelles, which remain intact on lowering the solution pH (whereas the original noncross-linked PDPA-PDMA micelles dissociate in acidic solution). This suggests a convenient route to silica-stabilized SCL micelles under mild conditions.