Reactivity of fluorostyrenes in cationic polymerization

Reactivity ratios relative for cationic copolymerization of three fluorostyrenes and styrene were studied. The values of r₁ and r₂ for various experimental conditions were determined. The influence of the nature of the solvent and of the polymerization temperature were studied in particular. Relative activation entropies and enthalpies were determined, and an isokinetic relationship was found for 2-, 3-, and 4-fluorostyrenes. There is a fairly linear correlation between the C8 chemical shift and the values of 1/r₂. All the experimental reactivities were correlated with the quantum chemistry parameters. From this correlation, interaction with C8 and also with C7 and F, was found to be possible, depending on the nature of the monomer.     

Quantifying and Controlling the Composition and ‘Randomness’ Distributions of Random Copolymers

The effect of disparity in the reactivity ratios of monomer pairs on the composition distribution and microstructure of the resultant copolymer formed through free‐radical polymerization is quantified computationally. This correlation has been determined for the monomer pairs of styrene/methyl methacrylate and styrene/2‐vinyl pyridine for a variety of monomer feed ratios. These monomer pairs were chosen as they represent systems that have been utilized to experimentally examine the importance of copolymer architecture on its ability to compatibilize an immiscible polymer blend. Moreover, their respective random copolymers show conflicting results for this examination. The results of this work show that the difference in the reactivity ratios of styrene and 2‐vinyl pyridine copolymer (r₁ = 0.5, r₂ = 1.3) significantly broadens the composition and randomness distribution of the resultant copolymer. This breadth is not easily avoided as it evolves even in the early stages of the copolymerization. Conversely, for the styrene/methyl methacrylate pair, the reactivity ratios are similar (r₁ = 0.46, r₂ = 0.52) and this results in a copolymer with a narrow composition distribution and sequence distribution dispersion. Stopping the polymerization at early conversion further narrows both distributions. The presented results, therefore, provide fundamental information that must be considered when planning an experimental procedure to evaluate the relative importance of sequence distribution and composition distribution of a random on its application.     

Emulsion polymerization and copolymerization of vinyl benzoate

Emulsion polymerization of vinyl benzoate and its copolymerization with vinyl acetate or styrene are described. The effect of the potassium persulfate initiator, and the sodium lauryl sulfate emulsifier concentration on the rate of vinyl benzote homopolymerization and the molecular weight of the polymers was determined. In copolymerization with vinyl benzoate, both comonomers, vinyl acetate and styrene, decrease the initial polymerization rate. With increasing amounts of styrene in the comonomer mixture the polymerization rate increases but with vinyl acetate an opposite effect is observed. Reactivity ratios of copolymerizations were determined. For the vinyl benzoate [M₁]-styrene [M₂] comonomer system a r₁ = 0.03 and a r₂ = 29.58 and for vinyl benzoate [M₁]-vinyl acetate [M₂], a r₁ = 1.93 and a r₂ = 0.20 was obtained. From the vinyl benzoate-styrene reactivity ratios the Qe parameters were calculated.     

Radical polymerization of butadiene-1-carboxylic acid

The homopolymerization and copolymerization of butadiene-1-carboxylic acid (Bu-1-Acid) (M₁) were studied in tetrahydrofuran at 50°C with azobisisobutyronitrile as an initiator. The initial rate of polymerization was proportional to [AIBN]^1/2 and [Bu-1-Acid]¹. The overall activation energy for the polymerization was 22.87 kcal/mole. For copolymerization with styrene (M₂) and acrylonitrile (M₂), the monomer reactivity ratios r₁, r₂ were determined by the Fineman-Ross method, as follows; r₁ = 5.55, r₂ = 0.08 (M₂ = styrene); r₁ = 11.0, r₂ = 0.03 (M₂ = acrylonitrile). Alfrey-Price Q-e values calculated from these values were 6.0 and +0.11, respectively. The Bu-1-Acid unit in the copolymer as well as the homopolymer was found from infrared and NMR spectral analyses to be composed of a trans-1,4 bond. The hydrogen-transfer polymerization of Bu-1-Acid leading to polyester was attempted with triphenylphosphine as initiator, but did not occur.     

Aminobutadienes. VI. Polymerization and Copolymerization of 2-Phthalimido-1,3-butadiene

2-Phthalimido-1,3-butadiene (2-PB) was polymerized either radically or thermally in bulk and in solution. While the polymer obtained by solution polymerization was soluble in some solvents such as halogenated hydrocarbons, dioxane, and dimethylformamide and had a softening point in the range of 160–170°C., that obtained by polymerization in bulk was insoluble in any solvent and only swollen on being immersed in such solvents as above. The reduced viscosity of the soluble polymer obtained by solution polymerization was approximately 1.0, and this value remained almost unchanged with varying polymerization time. Likewise the cationic polymerization in acetylene tetrachloride or in chloroform at 20°C. with the use of cationic catalysts such as boron trifluoride and stannic chloride was attempted, but no formation of polymer was observed. This monomer preferentially reacted with acrylonitrile, methyl methacrylate, styrene, and N-vinylphthalimide to form the respective copolymers; it reacted somewhat less readily with vinyl acetate. The monomer reactivity ratios in the copolymerization with styrene were calculated by the Fineman and Ross method and found to be r₁ (2-PB) = 5.2 and r₂ (styrene) = 0.11, respectively, from which the Q, e parameters were successively evaluated to be Q = 5.0 and e = ?0.05. The fact that e value is close to zero, easily explains why this monomer can copolymerize well both with acrylonitrile, which has a highly positive value of e (1.2) and with styrene, for which e is considerably negative (-0.8).     

Organometallic polymers. XVI. Copolymerization of styrenetricarbonylchromium and the reaction of polystyrene with chromium hexacarbonyl

Styrenetricarbonylchromium (IV) has been synthesized. Monomer IV did not homopolymerize with free-radical initiation but copolymerized with styrene, methyl acrylate, and vinylcymantrene. The copolymerizations were carried out in benzene solutions at 70°C with azobisisobutyronitrile as the initiator. The relative reactivity ratios were determined for the styrene and methyl acrylate copolymerizations. They were (defining M₁ as monomer IV) r₁ ? 0, r₂ ? 1.39 for styrene copolymerizations and r₁ ? 0, r₂ ? 0.75 for methyl acrylate copolymerization. Polystyrene reacted with chromium-hexacarbonyl in refluxing DME to produce a polymer in which about 32% of the benzene rings were complexed with ? Cr(CO)₃ units. The use of a polystyrene of narrow molecular weight distribution in this reaction demonstrated that no decomposition of the polystyrene chains occurred.     

Styrene-butadiene copolymerization initiated by organopotassium compounds in hydrocarbon medium

The following values of monomer reactivity ratios were found: r_S = 3,3 ± 0,3; r_B = 0,12 ± 0,02 (cyclohexane, 25 °C). The comparison of the kinetic parameters obtained with Li, Na and K counter-ions shows that the great difference between coordination polymerization with Li and “typically anionic” polymerization with K is mainly determined by the variation of the cross-propagation rate constant k_BS with the nature of the counter-ion. No evidences for the specific role of the solvation of Li counter-ion with butadiene monomer were found.     

Photopolymerization with the use of titanocene dichoride as sensitizer

Titanocene dichloride sensitized photopolymerization of vinyl ethers and styrene but did not polymerize methyl methacrylate and vinyl acetate. In the case of 2-chloroethyl vinyl ether, polymerization started rapidly some time after the color of the liquid had changed from orange to green. Polymerization was also achieved by heating the monomer at 60°C after stopping the irradiation at the end of the induction period. On the basis of the reactivity of the monomers and the effect of additives, polymerization is considered to proceed cationically. In case of the polymerization of styrene, conversion increased linearly with time. The k/k_t value of 6.3 × 10^?5l./mole-sec obtained for the polymerization of styrene agrees well with the value reported for radical polymerization. The agreement of the value and ineffective inhibition of polymerization in the presence of pyridine indicates the polymerization follows a radical mechanism. Copolymerization of styrene (M₁) and 2-chloroethyl vinyl ether (M₂) proceeded radically, and the reactivity ratios were r₁ = 2.5 and r₂ = 0.6.     

Synthesis of Graft Polymers by Copolymerization of Macromonomers. II. Copolymerization Kinetics of Styrene-and Methacrylate-Terminatedpoly(2-Acetoxyethyl Methacrylate) Macromonomers

Styrene-terminated poly(2-acetoxyethyl methacrylate) macromonomer (EBA), methacrylate-terminated poly(2-acetoxyethyl methacrylate) macromonomer (MPA), and methacrylate-terminated poly(methyl methacrylate) macromonomer (MPM) were synthesized and subjected to polymerization and copolymerization by a free-radical polymerization initiator (AIBN). EBA and MPA were homopolymerized at various concentrations. EBA exhibited higher reactivity than styrene. The reactivity of MPA, however, was almost equal to that of glycidyl methacrylate. Cumulative copolymer compositions were determined by GPC analysis of copolymerization products. The reactivity ratios estimated were r_a = 0.95 and r_b , = 0.90 for EBA macromonomer (a)-methyl methacrylate (b) copolymerization. These values were not consistent with literature values for the styrene-methyl methacrylate and p-methoxy-styrene-methyl methacrylate systems. The reactivity ratios estimated for MPA and 2-bromoethyl methacrylate were r_a - 0.95 and r_b , = 0.98; equal to the glycidyl methacrylate-2-bromoethyl methacrylate system. MPA or MPM was also copolymerized with styrene, and the reactivity ratios were r_a = 0.40, r_a = 0.60 and r_a = 0.39, r_a = 0.58, respectively. These estimates were in good agreement with the reactivity ratios for glycidyl methacrylate and styrene. Thus, no effect of molecular weight was observed for both copolymerization systems.     

Homo‐ and copolymerization of norbornene with styrene catalyzed by a series of copper(II) complexes in the presence of methylaluminoxane

Vinyl‐type polymerization of norbornene as well as random copolymerization of norbornene with styrene was studied using a series of copper complexes‐MAO. The precatalysts used here are copper complexes with β‐ketoamine ligands based on pyrazolone derivatives and the molecular structure of complex 4 was determined using X‐ray analysis. All of these catalyst systems are moderately active for the vinyl‐type polymerization of norbornene and random copolymerization of norbornene with styrene. The random copolymers obtained suggest that only one type of active species is present. Gel permeation chromatography (GPC) and NMR indicate that the copolymers are ‘true’ copolymers. The copolymerization reactivity ratios (r_NBE = 20.11 and r_Sty = 0.035) indicate a much higher reactivity of norbornene, which suggests a coordination polymerization mechanism. The solubility and processability of the copolymers are improved relative to polynorbornene and the thermostability of the copolymers is improved relative to polystyrene. Copyright © 2006 John Wiley & Sons, Ltd.     

Reactive polymers incorporating silyl enol ether groups. I. synthesis by radical polymerization of 2-(trimethylsiloxy)-butadiene and 2-(tert)-butyldimethylsiloxy butadiene

2-(Trimethylsiloxy)butadiene (TMSBD) and 2-(tert-butyldimethylsiloxy)butadiene (TBMSBD) were copolymerized with styrene (St) and methyl methacrylate (MMA) under free-radical conditions. The obtained polymers were found to contain reactive silyl enol ether groups in a ratio identical to the TMSBD or TBMSBD molar fraction in the copolymer. All investigated samples displayed only 1,4- and 3,4-microstructures. The influence of several experimental factors on the yields, rates of polymerization, microstructures, and copolymer compositions were examined. Monomer reactivity ratios r₁ and r₂ at 60°C were determined from copolymer composition curves at low conversions. The homopolymerization of TBMSBD was also investigated and results were compared with those previously obtained for TMSBD. A slight increase in rates was observed and was rationalized on the basis of the higher viscosity resulting from the structural change in the monomer. Thermal stabilities of the synthesized polymers were investigated by TGA and their glass transition temperatures were determined by DSC. All measurements are compatible with a possible use of TMSBD and TBMSBD copolymers as reactive polymers. © 1996 John Wiley & Sons, Inc.     

Facile synthesis of blocky styrene(1,3)‐butadiene copolymers having stereoregular monomeric sequences

Half titanocenes (CpCH₂CH₂O)TiCl₂ 1 and (CpCH₂CH₂ OCH₃)TiCl₃ 2 , activated by methylaluminoxane are tested in styrene–1,3‐butadiene copolymerization. The titanocene 1 is able to copolymerize styrene and 1,3‐butadiene, with a facile procedure, to give products with high molecular weight. The analysis of microstructure by ¹³C‐NMR reveals that the styrene homosequences in copolymers are in syndiotactic arrangement, while the butadiene homosequences are, prevailingly, in 1,4‐cis configuration, according with behavior of 1 in the homopolymerizations of styrene and 1,3‐butadiene, respectively. The reactivity ratios of copolymerization are estimated by diad composition analysis. All obtained copolymers have r₁ × r₂ values much larger than 1, indicating blocky nature of homosequences. The structural characterization by wide‐angle X‐ray powder diffraction and differential scanning calorimetry indicates that all copolymers are crystalline, with T_m varying from 171 to 239 °C, depending on the styrene content. The titanocene 2 did not succeed in styrene–1,3‐butadiene copolymerization, giving rise to a blend of homopolymers. Compounds 1 and 2 were also tested in the polymerization of several conjugated dienes, and the obtained results were very useful to rationalize the behavior of both catalysts in the copolymerization of styrene and butadiene. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 815–822, 2010     

Radical polymerization of new functional monomer: Methacryloyl isocyanate containing 4‐chloro‐1‐phenol

New functional monomer methacryloyl isocyanate containing 4‐chloro‐1‐phenol (CPHMAI) was prepared on reaction of methacryloyl isocyanate (MAI) with 4‐chloro‐1‐phenol (CPH) at low temperature and was characterized with IR, ¹H, and ¹³C‐NMR spectra. Radical polymerization of CPHMAI was studied in terms of the rate of polymerization, solvent effect, copolymerization, and thermal properties. The rate of polymerization of CPHMAI has been found to be smaller than that of styrene under the same conditions. Polar solvents such as dimethylsulfoxide (DMSO) and N,N‐dimethyl formamide (DMF) were found to slow the polymerization. Copolymerization of CPHMAI (M₁) with styrene (M₂) in tetrahydrofuran (THF) was studied at 60°C. The monomer reactivity ratio was calculated to be r₁ = 0.49 and r₂ = 0.66 according to the method of Fineman—Ross. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 469–473, 2000     

Polymerization of aromatic aldehydes. IV. Cationic copolymerization of phthalaldehyde isomers and styrene

Copolymerizations of three phthalaldehyde isomers (M₂) with styrene (M₁) were carried out in methylene chloride or in toluene with BF₃OEt₂ catalyst. The monomer reactivity ratios were r₁ = 0.77, r₂ = 0 for the meta isomer and r₁ = 0.60, r₂ = 0 for the para isomer. The second aldehyde group of both isomers did not participate in polymerization and acted simply as the electron-withdrawing group, thus reducing the cationic reactivity of these monomers. Copolymerization behaviors of the ortho isomer (o-PhA) were quite different between 0°C and ?78°C. At ?78°C, o-PhA preferentially polymerized to yield “living” cyclopolymers, until an equilibrium concentration of o-PhA monomer was reached. Then, styrene propagated from the living terminal rather slowly. The block structure of the copolymer was confirmed by the chemical and spectroscopic means. In the copolymerization at 0°C, the o-PhA unit in copolymer consisted both of cyclized and uncyclized units. This copolymer seemed to contain short o-PhA sequences. The variation of the o-PhA-St copolymer structure with the polymerization temperature was explained on the basis of whether the polymerization was carried out above or below the ceiling temperature (?43°C) of the homopolymerization of o-PhA.     

Emulsion copolymerization of styrene and methyl methacrylate

Chain transfer constants to monomer have been measured by an emulsion copolymerization technique at 44°C. The monomer transfer constant (ratio of transfer to propagation rate constants) is 1.9 × 10^?5 for styrene polymerization and 0.4 × 10^?5 for the methyl methacrylate reaction. Cross-transfer reactions are important in this system; the sum of the cross-transfer constants is 5.8 × 10^?5. Reactivity ratios measured in emulsion were r₁ (styrene) = 0.44, r₂ = 0.46. Those in bulk polymerizations were r₁ = 0.45, r₂ = 0.48. These sets of values are not significantly different. Monomer feed compcsition in the polymerizing particles is the same as in the monomer droplets in emulsion copolymerization, despite the higher water solubility of methyl methacrylate. The equilibrium monomer concentration in the particles in interval-2 emulsion polymerization was constant and independent of monomer feed composition for feeds containing 0.25–1.0 mole fraction styrene. Radical concentration is estimated to go through a minimum with increasing methyl methacrylate content in the feed. Rates of copolymerization can be calculated a priori when the concentrations of monomers in the polymer particles are known.     

Polymerization of 1,3‐dienes with functional groups. II. Free‐radical polymerization of N‐(2‐methylene‐3‐butenoyl)piperidine

The free‐radical homopolymerization and copolymerization behavior of N‐(2‐methylene‐3‐butenoyl)piperidine was investigated. When the monomer was heated in bulk at 60 °C for 25 h without an initiator, about 30% of the monomer was consumed by the thermal polymerization and the Diels–Alder reaction. No such side reaction was observed when the polymerization was carried out in a benzene solution with 1 mol % 2,2′‐azobisisobutylonitrile (AIBN) as an initiator. The polymerization rate equation was found to be R_p ∝ [AIBN]^0.507[M]^1.04, and the overall activation energy of polymerization was calculated to be 89.5 kJ/mol. The microstructure of the resulting polymer was exclusively a 1,4‐structure that included both 1,4‐E and 1,4‐Z configurations. The copolymerizations of this monomer with styrene and/or chloroprene as comonomers were carried out in benzene solutions at 60 °C with AIBN as an initiator. In the copolymerization with styrene, the monomer reactivity ratios were r₁ = 6.10 and r₂ = 0.03, and the Q and e values were calculated to be 10.8 and 0.45, respectively. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1545–1552, 2003     

Living Carbocationic Polymerization of Styrene in the Presence of Proton Trap

Abstract

The living polymerization of styrene was achieved with the 2,4,4-trimethyl-2-pentyl chloride/TiCl₄/MeCl:methylcyclohexane 40:60 v:v/?80°C polymerization system in the presence of di-tert-butylpyridine in concentrations comparable to the concentration of protic impurities. It was determined that the living nature of the polymerization is not due to carbocation stabilization. The polymerization is second order in TiCl₄. Side reactions, namely polymerization by direct initiation and intermolecular alkylation, are operational, and a careful selection of experimental conditions is necessary to minimize their effect and obtain apparently living behavior. Polymerization by direct initiation can be minimized by increasing the initiator concentration, and intermolecular alkylation can be reduced by quenching the polymerization system when the conversion reaches close to 100%.     

Sulfur-Containing Vinyl Monomers. XIX. Radical Polymerization of 2-Mercaptobenzothiazolyl Methacrylate

2-Mercaptobenzothiazolyl methacrylate (MBTM) was synthesized by the reaction of 2-mercaptobenzothiazole and methacrylyl chloride in tetrahydrofuran at -18°C. MBTM was found to polymerize in the presence of 2,2′-azobisisobutyronitrile (AIBN), n-BuLi, and UV light. From the kinetic studies of radical polymerization of MBTM with AIBN in benzene at 60°C, the overall activation energy was determined to be 18.9 kcal/mole, and the rate of polymerization (R) was expressed as R_p = k[AIBN]^0.5 [MBTM], where k is the overall polymerization rate constant. From these results this polymerization was confirmed to proceed via an ordinary radical mechanism. This monomer (M₂) was also copolymerized radically with styrene (M₁) at 60°C, and the resulting copolymerization parameters were determined as r₁ = 0.042, r₂ = 0.20, Q₂ = 4.09, and e₂ = 1.39. The thermal stability and the photodegradation behavior of the polymers were examined, and they were compared with those of the related polymers.     

Copolymerization of isopropenyl and isopropylidene oxazolones with styrene

2-Isopropenyl-4-isopropyl-2-oxazolin-5-one (M₂), was copolymerized with styrene (M₁), and the monomer reactivity ratios were determined to be r₁ = 0.31 ± 0.03, r₂ = 1.12 ± 0.10. New isomerized oxazolones (M₂), 2-isopropylidene-4-methyl-3-oxazolin-5-one, 2-isopropylidene-4-isopropyl-3-oxazolin-5-one, and 2-isopropylidene-4-isobutyl-3-oxazolin-5-one were prepared and copolymerized with styrene. The monomer reactivity ratios were: r₁ = 0.36 = 0.07, r₂ = 0.0; r₁ = 0.39 ± 0.06, r₂ = 0.00 ± 0.10; r₁ = 0.39 ± 0.10, r₂ = 0.0, respectively. The isomerized oxazolones showed no tendency towards homopolymerization by radical initiator. From the results of infrared and NMR spectra and hydrolysis of the copolymer, it was indicated that the isomerized oxazolones participated in copolymerization in the form of 1–4 polymerization of the conjugated dienes (exo double bond at C₂ and the C?N in the ring). Copolymers reacted with nucleophilic reagents such as amines and alcohols.