Copolymerization of 2-Hydroxypropyl Methacrylate with Alkyl Met hacrylates

2-Hydroxypropyl methacrylate (2-HPMA) has been copolym-erized with ethyl methacrylate (EMA), n-butyl methacrylate (BMA), and 2-ethylhexyl methacrylate (EHMA) in bulk at 60°C using benzoyl peroxide as initiator. The copolymer composition has been determined from the hydroxyl content. The reactivity ratios have been calculated by the Yezrielev, Brokhina, and Raskin method. For copolymerization of 2-HPMA (M₁) with EMA (M₂), the reactivity ratios are r₁ = 1.807 ± 0.032 and r₂ = 0.245 ± 0.021; with BMA (M₂) they are n = 2.378 ± 0.001 and r₂ = 0.19 ± 0.01; and with EHMA the values are r₁ = 4.370 ± 0.048 and r₂ = 0.103 ± 0.006. Since reactivity ratios are the measure of distribution of monomer units in copolymer chain, the values obtained are compared and discussed. This enables us to choose a suitable copolymer for synthesizing thermoset acrylic polymers, which are obtained from cross-linking of hydroxy functional groups of HPMA units, for specific end-uses.     

Copolymerization of Tri-n-butyltin Acrylate and Tri-n-butyltin Methacrylate Monomers with Vinyl Monomers Containing Functional Groups

A new approach to obtaining thermoset organotin polymers, which permits control of crosslinking site distribution and, through it, a better control of properties of organotin antifouling polymers, is reported. Tri-n-butyltin acrylate and tri-n-butyltin methacrylate monomers were prepared and copolymerized, by the solution polymerization method with the use of free-radical initiators, with several vinyl monomers containing either an epoxy or a hydroxyl functional group. The reactivity ratios were determined for six pairs of monomers by using the analytical YBR method to solve the differential form of the copolymer equation. For copolymerization of tri-n-butyltin acrylate (M₁) with glycidyl acrylate (M₂), these reactivity ratios were n = 0.295 ± 0.053, r₂ = 1.409 ± 0.103; with glycidyl methacrylate (M₂) they were r₁ = 0.344 ± 0.201, r₂ = 4.290 ± 0.273; and with N-methylolacrylamide (M₂) they were r₁ = 0.977 ± 0.087, r₂ = 1.258 ± 0.038. Similarly, for the copolymerization of tri-n-butyltin methacrylate (Mi) with glycidyl aery late (M₂) these reactivity ratios were r₁ = 1.356 ± 0.157, r₂ = 0.367 ± 0.086; with glycidyl methacrylate (M₂) they were r₁ = 0.754 ± 0.128, r₂ = 0.794 ± 0.135; and with N-methylolacrylamide (M₂) they were r₁ ?4.230 ± 0.658, r₂ = 0.381 ± 0.074. Even though the magnitude of error in determination of reactivity ratios was small, it was not found possible to assign consistent Q,e values to either of the organotin monomers for all of its copolymerizations. Therefore, Q,e values were obtained by averaging all Q,e values found for the particular monomer, and these were Q = 0.852, e = 0.197 for the tri-n-butyltin methacrylate monomer; and Q = 0.235, e = 0.401 for the tri-n-butyltin acrylate monomer. Since the reactivity ratios indicate the distribution of the units of a particular monomer in the polymer chain, the measured values are discussed in relation to the selection of a suitable copolymer which, when cross-linked with appropriate crosslinking agents through functional groups, would give thermoset organotin coatings with an optimal balance of mechanical and antifouling properties.     

Copolymerization of glycidyl methacrylate with alkyl acrylate monomers

A newer approach to obtaining acrylic thermoset polymers with adequate hydrophilicity required for various specific end uses is reported. Glycidyl methacrylate (GMA) was copolymerized with n-butyl acrylate (n-BA), isobutyl acrylate (i-BA), and 2-ethylhexyl acrylate (2-EHA) in bulk at 60°C. with benzoyl peroxide as free radical initiator. The copolymer composition was determined from the estimation of epoxy group. Reactivity ratios were calculated by the Yezrielev, Brokhina, and Roskin method. For copolymerization of GMA (M₁) with n-BA (M₂) the reactivity ratios were r₁ = 2.15 ± 0.14, r₂ = 0.12 ± 0.03; with i-BA (M₂) they were r₁ = 1.27 ± 0.06, r₂ = 0.33 ± 0.031; and with 2-EHA (M₂) they were r₁ = 2.32 ± 0.14, r₂ = 0.13 ± 0.009. The reactivity ratios were the measure of distribution of monomer units in a copolymer chain; the values obtained are compared and discussed.     

A New Analytical Solution of the Binary Copolymer Composition Equation and Suggested Procedure for Deriving the Monomer Reactivity Ratios

Abstract

An absolute analytical procedure is found for obtaining the parameters of the differential, binary, copolymer composition equation, setting up a least-squares condition that places equal weight on all experimental lines of the Mayo-Lewis plot. The values of monomer reactivity ratios for the system ethyl methacrylate (M₁-vinylidene chloride (M₂), studied by Agron et al., are r₁ = 2.052 ± 0.043 and r₂ = 0.346 ± 0.052. These values, especially r₁, differ from the estimates by Agron et al. The new solution, however, appears to yield the estimate of maximum likelihood for the reactivity ratios based on the given experimental data.     

Studies on Synthesis and Characterization of Charge Transfer Polymerization of Styrene and Alkyl Methacrylates

Abstract

Copolymers involving styrene and homologues of alkyl methacrylates (viz., methyl, ethyl, and butyl methacrylates) were synthesized at 60°C by employing a mixture of n‐butylamine and carbontetrachloride as charge transfer (CT) initiators in dimethyl sulphoxide medium. The CT complex was characterized by UV spectroscopy while the respective copolymers were characterized by employing infrared (IR) and ¹H NMR spectroscopy. The copolymer compositions were determined by using ¹H NMR spectroscopy and the reactivity ratios were computed by Fineman–Ross (F–R) and Kelen–Tudos (K–T) methods. The reactivity ratios of Sty‐MMA and Sty‐EMA copolymers indicate that higher level of styrene is incorporated in the copolymer. On the other hand the Sty‐BMA system exhibits different behavior. The higher value of r ₂ is obtained denoting that BMA is more active than styrene and hence, more BMA is present in the copolymer chain. In Sty‐MMA and Sty‐BMA systems, the product of r ₁ and r ₂ is greater than 1, representing the formation of high degree of random copolymers. However, in the case of Sty‐EMA, the product of r ₁ and r ₂ is less than 1 indicating the formation of alternating copolymer.     

Homo‐ and Copolymerization of Phenacyl Methacrylate via the Atom Transfer Radical Polymerization Method

The homo‐ and copolymers via atom transfer radical (co)polymerization (ATRP) of phenacyl methacrylate (PAMA) with methyl methacrylate (MMA) and t‐butyl methacrylate (t‐BMA) was performed in bulk at 90°C in the presence of ethyl 2‐bromoacetate, cuprous(I)bromide (CuBr), and 2,2′‐bipyridine. The polymerization of PAMA was carried out at 70, 80, and 100°C. Also, free‐radical polymerization of PAMA was carried out at 60°C. Characterization using FT‐IR and ¹³C‐NMR techniques confirmed the formation of a five‐membered lactone ring through ATRP. The in situ addition of methylmethacrylate to a macroinitiator of poly(phenacyl methacrylate) [Mn=2800, Mw/Mn=1.16] afforded an AB‐type block copolymer [Mn=13600, Mw/Mn=1.46]. When PAMA units increased in the living copolymer system, the Mn values and the polydispersities were decreased (1.1<Mw/Mn<1.79). The monomer reactivity ratios were computed using Kelen‐Tüdös (K‐T), Fineman‐Ross (F‐R) and Tidwell‐Mortimer (T‐M) methods and were found to be r₁= 1.17; r₂= 0.76; r₁=1.16; r₂=0.75 and r₁=1.18; r₂=0.76, respectively (r₁=is monomer reactivity ratio of PAMA). The initial decomposition temperatures of the resulting copolymers were measured by TGA. Blends of poly(PAMA) and poly(MMA) obtained via the ATRP method have been characterized by differential thermal and thermogravimetric analyses.     

Copolymerization of 2-sulfoethyl methacrylate

Copolymers of 2-sulfoethyl methacrylate, (SEM) were prepared with ethyl methacrylate, ethyl acrylate, vinylidene chloride, and styrene in 1,2-dimethoxyethane solution with N,N′-azobisisobutyronitrile as initiator. The monomer reactivity ratios with SEM (M₁) were: vinylidene chloride, r₁ = 3.6 ± 0.5, r₂ = 0.22 ± 0.03; ethyl acrylate, r₁ = 3.2 ± 0.6, r₂ = 0.30 ± 0.05; ethyl methacrylate, r₁ = 2.0 ± 0.4, r₂ = 1.0 ± 0.1; styrene, r₁ = 0.6 ± 0.2, r₂ = 0.37 ± 0.03. The values of the copolymerization parameters calculated from the monomer reactivity ratios were e = +0.6 and Q = 1.4. Comparison of the monomer reactivities indicates that SEM is similar to ethyl methacrylate with regard to copolymerization reactivity in 1,2-dimethoxyethane solution. The sodium salt of 2-sulfoethyl methacrylate, SEM^?Na^⊕, was copolymerized with 2-hydroxyethyl methacrylate (M₂) in water solution. Reactivity ratios of r₁ = 0.7 ± 0.1 and r₂ = 1.6 ± 0.1 were obtained, indicating a lower reactivity of SEM^?Na^⊕ in water as compared to SEM in 1,2-dimethoxyethane. This decreased reactivity was attributed to greater ionic repulsion between reacting species in the aqueous medium.     

Copolymerizations of alkyl methacrylates with vinyltriacetoxysilane

Copolymerizations of methyl methacrylate (MMA) and butyl methacrylate (BMA) with vinyltriacetoxysilane (VTAS) have been carried out in bulk at 70°. The compositions of the copolymers were determined from their silicon contents; the reactivity ratios were calculated by the Kelen-Tüdo&#x030B;s method. For MMA/VTAS, r₁ = 7.75 ± 0.31 and for BMA/VTAS, r₁ = 4.62 ± 0.15; in both systems, r₂ is zero, indicating that VTAS does not homopolymerize under the experimental conditions. The influence of the silicon comonomer on properties of the copolymers, such as solubility annd thermal behaviour, was studied.     

Copolymerization of 4-cyclopentene-1,3-dione with p-chlorostyrene and vinylidene chloride

The copolymerization of 4-cyclopentene-1,3-dione (M₂) with p-chlorostyrene and vinylidene chloride is reported. The copolymers were prepared in sealed tubes under nitrogen with azobisisobutyronitrile initiator. Infrared absorption bands at 1580 cm.^?1 revealed the presence of a highly enolic β-diketone and indicated that copolymerization had occurred. The copolymer compositions were determined from the chlorine analyses and the reactivity ratios were evaluated. The copolymerization with p-chlorostyrene (M₁) was highly alternating and provided the reactivity ratios r₁ = 0.32 ± 0.06, r₂ = 0.02 ± 0.01. Copolymerization with vinylidene chloride (M₁) afforded the reactivity ratios r₁ = 2.4 ± 0.6, r₂ = 0.15 ± 0.05. The Q and e values for the dione (Q = 0.13, e = 1.37), as evaluated from the results of the vinylidene chloride case, agree closely with the previously reported results of copolymerization with methyl methacrylate and acrylonitrile and confirm the general low reactivity of 4-cyclopentene-1,3-dione in nonalternating systems.     

Monomer reactivity ratio and Q–e values for copolymerization of hydroxyalkyl acrylates and 2-(1-aziridinyl)ethyl methacrylate with styrene

Copolymers of 2-hydroxyethyl acrylate, hydroxypropyl acrylate, and 2(1-aziridinyl)-ethyl methacrylate (M₂) with styrene (M₁) were prepared in benzene solution at 60°C. Benzoyl peroxide, 0.1–0.2 mole-%, was used as initiator. Copolymer samples with the molar concentrations of M₂ feed ranging from 0.10 to 0.85 were used to determine the reactivity ratios. Elemental analysis and nuclear magnetic resonance spectroscopy (NMR) were used to determine copolymer compositions. There was a solubility problem when the latter technique was applied. When samples which were completely soluble were analyzed, the results obtained from NMR and elemental analysis were in excellent agreement. The monomer reactivity ratios and the corresponding parameters for the copolymerization of (M₁) with 2-hydroxyethyl acrylate are: r₁ = 0.38 ± 0.02, r₂ = 0.34 ± 0.03; Q₂ = 0.85, e₂ = 0.64; with hydroxypropyl acrylate are: r₁ = 0.45 ± 0.03, r₂ = 0.36 ± 0.03; Q₂ = 0.75, e₂ = 0.56; with 2(1-aziridinyl)ethyl methacrylate are: r₁ = 0.53 ± 0.02, r₂ = 0.63 ± 0.04; Q₂ = 0.82, e₂ = 0.25.     

Synthesis and Characterization of Novel Methacrylic Copolymers: Determination of Monomer Reactivity Ratios

A new methacrylic monomer, 4‐nitro‐3‐methylphenyl methacrylate (NMPM) was prepared by reacting 4‐nitro‐3‐methyl phenol dissolved in methyl ethyl ketone (MEK) in the presence of triethylamine as a catalyst. Copolymerization of NMPM with methyl methacrylate (MMA) has been carried out in methyl ethyl ketone (MEK) by free radical solution polymerization at 70±1°C utilizing benzoyl peroxide (BPO) as initiator. Poly (NMPM‐co‐MMA) copolymers were characterized by FT‐IR, ¹H‐NMR and ¹³C‐NMR spectroscopy. The molecular weights (M_w and M_n) and polydispersity indices (M_w/M_n) of the polymers were determined using a gel permeation chromatograph. The glass transition temperatures (T_g) of the copolymers were determined by a differential scanning calorimeter, showing that T_g increases with MMA content in the copolymer. Thermogravimetric analysis of the polymers, performed under nitrogen, shows that the stability of the copolymer increases with an increase in NMPM content. The solubility of the polymers was tested in various polar and non‐polar solvents. Copolymer compositions were determined by ¹H‐NMR spectroscopy by comparing the integral peak heights of well separated aromatic and aliphatic proton peaks. The monomer reactivity ratios were determined by the Fineman‐Ross (r₁ =7.090:r₂=0.854), Kelen‐Tudos (r₁=7.693: r₂=0.852) and extended Kelen‐Tudos methods (r₁=7.550: r₂= 0.856).     

Characterisation of glycidylmethacrylate/methacrylonitrile copolymers by NMR spectroscopy

Glycidylmethacrylate/methacrylonitrile (G/M) copolymers of different compositions were prepared and a copolymer composition was obtained from quantitative ¹³C NMR spectroscopy. Reactivity ratios for comonomers were calculated using the Kelen–Tudos (KT) and non linear error in variable (EVM) methods. The reactivity ratios obtained from KT and EVM are r_G=1.14±0.1, r_M=0.76±0.06 and r_G=1.12, r_M=0.75, respectively. Complete spectral assignment of ¹³C- and ¹H-NMR spectra were done with the help of Distortionless Enhancement by Polarization Transfer (DEPT) and 2D ¹³C–¹H heteronuclear single quantum coherence (HSQC).     

Thermal and optical properties of highly fluorinated copolymers of methacrylates

Copolymers of pentafluorophenylhexafluoroisopropyl methacrylate (FPPMA) with trifluoroethyl methacrylate (TFEMA) were prepared in THF solution and in bulk using azobisisobutyronitrile as a free radical initiator. The monomer reactivity ratios of TFEMA (M₁) and FPPMA (M₂) were calculated as r₁ = 0.55 and r₂ = 0.07. The refractive indices of poly(TFEMA) and poly(FPPMA) are very similar as 1.435 and 1.430, respectively, at 532 nm, and the copolymer films were transparent. The glass transition temperatures (T_g) of the copolymers were in the range of 80–90°C and showed a negative deviation from the Gordon–Taylor equation. The thermal decomposition temperature (T_d) was increased with the content of FPPMA in copolymers. Low water absorption for 1:1 FPPMA/TFEMA copolymer was detected. Copolymers of FPPMA with hexafluoroisopropyl methacrylate (HFPMA) were also prepared. The monomer reactivity ratios of HFPMA (M₁) and FPPMA (M₂) were calculated as r₁ = 0.43 and r₂ = 0.10. The T_gs of the copolymers were in the range of 88–95°C and showed also a negative deviation from the Gordon–Taylor equation. T_g and T_d of the copolymers were increased with the content of FPPMA. The refractive index of poly(HFPMA) (1.384 at 532 nm) is much lower than that of FPPMA homopolymer, but copolymer films obtained were clear and transparent. Copyright © 2013 John Wiley & Sons, Ltd.     

Radical copolymerization behavior of a highly fluorinated cyclic olefin with vinyl ether

The copolymerization of a highly fluorinated cyclic monomer, octafluorocyclopentene (OFCPE, M₁), with ethyl vinyl ether (EVE, M₂) was investigated with a radical initiator in bulk. Despite the poor homopolymerizability of each monomer, the copolymerization proceeded successfully, and the molecular weights of the copolymers reached up to more than 10,000. Incorporation of the OFCPE units into the copolymer led to an increase in the glass‐transition point. The copolymer composition was determined from ¹H NMR spectra and elemental analysis data. The molar fraction of the OFCPE unit in the copolymer increased and approached but did not exceed 0.5. The monomer reactivity ratios were estimated by the Yamada–Itahashi–Otsu nonlinear least‐squares procedure as r_1,OFCPE = ?0.008 ± 0.010 and r_2,EVE = 0.192 ± 0.015. The reactivity ratios clearly suggest that the copolymerization proceeds alternatively in the case of an excessive feed of OFCPE. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1151–1156, 2002     

Anionic copolymerization of optically active α-methylbenzyl methacrylate and trityl methacrylate. I. Reactivity of monomers

The monomer reactivity ratios were determined in the anionic copolymerization of (S)- or (RS)-α-methylbenzyl methacrylate (MBMA) and trityl methacrylate (TrMA) with butyllithium at ?78°C, and the stereoregularity of the yielded copolymer was investigated. In the copolymerization of (S)-MBMA (M₁) and TrMA (M₂) in toluene the monomer reactivity ratios were r₁ = 8.55 and r₂ = 0.005. On the other hand, those in the copolymerization of (RS)-MBMA with TrMA were r₁ = 4.30 and r₂ = 0.03. The copolymer of (S)-MBMA and TrMA prepared in toluene was a mixture of two types of copolymer: one consisted mainly of the (S)-MBMA unit and was highly isotactic and the other contained both monomers copiously. The same monomer reactivity ratios, r₁ = 0.39 and r₂ = 0.33, were obtained in the copolymerizations of the (S)-MBMA–TrMA and (RS)-MBMA–TrMA systems in tetrahydrofuran (THF). The microstructures of poly[(S)-MBMA-co-TrMA] and poly-[(RS)-MBMA-co-TrMA] produced in THF were similar where the isotacticity increased with an increase in the content of the TrMA unit.     

Copolymerization of styrene and methyl methacrylate. Reactivity ratios from conversion–composition data

A method for the determination of reactivity ratios from conversion–composition data has been outlined. The conversion–composition changes during the copolymerization of styrene (M₁) and methyl methacrylate (M₂) have been studied at 60°C. By a method of graphical intersection, the integrated form of Skeist's equation has been used to determine the reactivity ratios (r₁ = 0.54 ± 0.02 and r₂ = 0.50 ± 0.06) in reasonably good agreement with values reported in the literature. The area of intersection was used as a measure of the precision of the data.     

Copolymerization of ethyl α-(hydroxymethyl)acrylate with maleimide and characterization of the resulting copolymer

Copolymerization of maleimide (MI) and ethyl α-(hydroxymethyl)acrylate (EHMA) was performed at 60°C with AIBN as the initiator in THF. The monomer reactivity ratios were determined as r₁ (MI) = 0.13 and r₂ (EHMA) = 2.20. As the molar fraction of MI in the monomer feed increased, the initial rate of copolymerization decreased. TGA diagrams suggested the crosslinking reaction of the copolymer on heating. DSC and WAXD results suggested the existence of incomplete crystallinity in the copolymer. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1291–1299, 1998     

Free Radical Copolymerization of N‐(4‐Carboxyphenyl)maleimide with Hydropropyl Methacrylate

Abstract

The free radical copolymerization of N‐(4‐carboxyphenyl)maleimide (CPMI) (M₁) with hydropropyl methacrylate (HPMA) (M₂) was carried out with 2,2′‐azobis(isobutyronitrile) (AIBN) as an initiator in ethyl acetate at 75°C. The composition of copolymer prepared at low conversion was determined by elemental analysis. The monomer reactivity ratios were found to be r ₁?=?0.31 and r ₂?=?1.11 as determined by the YBR equation. The number‐average molecular weight and polydispersity were determined by gel permeation chromatography (GPC). Furthermore, the solvent effect on this copolymerization system was also investigated. The resulting copolymer was characterized by FTIR and ¹H‐NMR spectroscopy. The thermal stability of copolymers was determined by thermogravimetric analysis (TGA). It was found that the copolymer shows step‐by‐step degradation, the initial decomposition temperature (T _i), and final decomposition temperature (T _f) increased with increasing the component of CPMI in copolymer.     

Free-radical homopolymerization and copolymerization of ethyl α-hydroxymethylacrylate in tetrahydrofuran

Ethyl α-hydroxymethylacrylate (EHMA) was polymerized in a 3 mol/L tetrahydrofuran solution at 50°C, using 2–2' azobisisobutyronitrile as initiator. The kinetic behavior indicates a higher polymerization rate for EHMA than for methyl methacrylate (MMA). Copolymerization reaction between MMA and EHMA, under the same experimental conditions, was carried out and values of r_MMA = 1.264 and r_EHMA = 1.285 were found for the reactivity ratios. The comparison of triad sequences as determined from Bernouillian statistic to those calculated from the experimental spliting of O-methyl and α-methyl ¹H-NMR signals of the copolymers confirm the obtained results. © 1992 John Wiley & Sons, Inc.     

Synthesis,Characterization, and Reactivity Ratios of Phenyl Methacrylate-N-vinyl-2-pyrrolidone Copolymers

Free radical solution copolymerization of phenyl methacrylate and N-vinyl-2-pyrrolidone was carried out using benzoyl peroxide in 2-butanone solution at 70°C. The composition of the copolymer was determined using ¹H-NMR spectra by comparing the intensities of aromatic protons to that of total protons. The results were used to calculaie the copolymerization reactivity ratios by both the Fineman-Ross (F-R) and Kelen-Tüdös (K-T) methods. The reactivity ratios are r ₁ = 4.49 ± 1.27 and r ₂ = 0.05 ± 0.09 as determined by the K-T method. These values are in good agreement with those determined by the F-R method. The FT-infrared and ¹³C-NMR spectra of the copolymer are discussed.