Copolymerization of methacrylic acid alkali metal salts and polyether-containing monomers in solid polymer electrolytes

Copolymerization of methacrylic acid alkali metal salts (MAAM; M = Li, Na, K, Rb or Cs) and oligo(oxyethylene) methacrylate (MEO) was carried out in bulk or in poly(oligo(oxyethylene) methacrylate) (PMEO) at 60°C. The copolymers of MAAM and MEO which were obtained by bulk polymerization showed a cation conductivity of around 1 × 10^?7 S/cm at room temperature. On the other hand, the copolymers obtained by radical polymerization in PMEO, showed a higher cation conductivity (10^?6–10^?5 S/cm). Furthermore, higher cation conductivity was observed for the copolymer systems containing alkali metal cations with a larger ion radius. This tendency was explained by the strength of the bond between alkali metal cation and ether oxygens. The degree of dissociation had little effect on this difference in the conductivity. The effective dissociation of methacrylic salts was enhanced in the copolymer compared to the homopolymer because of the suppression of the adjacent dissociative carboxylic acid groups. Arrhenius plots for ionic conductivity show the migration of ions along with the segmental motion of the polymer matrix.     

High ionic conductivity of all-solid polymer electrolytes based on polyorganophosphazenes

A series of all-solid polymer electrolytes were prepared by cross-linking new designed poly(organophosphazene) macromonomers. The ionic conductivities of these all-solid, dimensional steady polymer electrolytes were reported. The temperature dependence of ionic conductivity of the all-solid polymer electrolytes suggested that the ionic transport is correlated with the segmental motion of the polymer. The relationship between lithium salts content and ionic conductivity was discussed and investigated by Infrared spectrum. Furthermore, the polarity of the host materials was thought to be a key to the ionic conductivity of polymer electrolyte. The all-solid polymer electrolytes based on these poly(organophosphazenes) showed ionic conductivity of 10⁻⁴ S cm⁻¹ at room temperature.     

Synthesis and properties of all solid polymer electrolytes based on poly(vinyl acetate‐co‐acetyl ethylene oxide acrylate)

Poly(acetyl ethylene oxide acrylate‐co‐vinyl acetate) (P(AEOA‐VAc)) was synthesized and used as a host for lithium perchlorate to prepare an all solid polymer electrolyte. Introduction of carbonyl groups into the copolymer increased ionic conductivity. All solid polymer electrolytes based on P(AEOA‐VAc) at 14.3 wt% VAc with 12wt% LiClO₄ showed conductivity as high as 1.2 × 10^?4 S cm^?1 at room temperature. The temperature dependence of the ionic conductivity followed the VTF behavior, indicating that the ion transport was related to segmental movement of the polymer. FTIR was used to investigate the effect of the carbonyl group on ionic conductivity. The interaction between the lithium salt and carbonyl groups accelerated the dissociation of the lithium salt and thus resulted in a maximum ionic conductivity at a salt concentration higher than pure PAEO‐salts system. Copyright © 2010 John Wiley & Sons, Ltd.     

Ultraviolet-Cured Semi-Interpenetrating Network Polymer Electrolytes for High-Performance Quasi-Solid-State Lithium Metal Batteries

Solid polymer electrolytes with relatively low ionic conductivity at room temperature and poor mechanical strength greatly restrict their practical applications. Herein, we design semi-interpenetrating network polymer (SNP) electrolyte composed of an ultraviolet-crosslinked polymer network (ethoxylated trimethylolpropane triacrylate), linear polymer chains (polyvinylidene fluoride-co-hexafluoropropylene) and lithium salt solution to satisfy the demand of high ionic conductivity, good mechanical flexibility, and electrochemical stability for lithium metal batteries. The semi-interpenetrating network has a pivotal effect in improving chain relaxation, facilitating the local segmental motion of polymer chains and reducing the polymer crystallinity. Thanks to these advantages, the SNP electrolyte shows a high ionic conductivity (1.12 mS cm⁻¹ at 30 °C), wide electrochemical stability window (4.6 V vs. Li⁺/Li), good bendability and shape versatility. The promoted ion transport combined with suppressed impedance growth during cycling contribute to good cell performance. The assembled quasi-solid-state lithium metal batteries (LiFePO₄/SNP/Li) exhibit good cycling stability and rate capability at room temperature.     

A novel composite polymer electrolyte containing room-temperature ionic liquids and heteropolyacids for dye-sensitized solar cells

A novel composite polymeric gel comprising room-temperature ionic liquids (1-butyl-3-methyl-imidazolium-hexafluorophosphate, BMImPF₆) and heteropolyacids (phosphotungstic acid, PWA) in poly(2-hydroxyethyl methacrylate) matrix was successfully prepared and employed as a quasi-solid state electrolyte in dye-sensitized solar cells (DSSCs). These composite polymer electrolytes offered specific benefits over the ionic liquids and heteropolyacids, which effectively enhanced the ionic conductivity of the composite polymer electrolyte. Unsealed devices employing the composite polymer electrolyte with the 3% content of PWA achieved the solar to electrical energy conversion efficiency of 1.68% under irradiation of 50 mW cm⁻² light intensity, increasing by a factor of more than three compared to a DSSC with the blank BMImPF₆-based polymer electrolyte without PWA. It is expected that these composite polymer electrolytes are an attractive alternative to previously reported hole transporting materials for the fabrication of the long-term stable quasi-solid state or solid state DSSCs.     

Synthesis and characterization of a new network polymer electrolyte containing polyether in the main chains and side chains

A new network polymer electrolyte matrix with polyether in the side chains and main chains was synthesized by the azo-macroinitiator method and urethane reaction. The macroinitiator, polymer and network polymer were confirmed by Fourier-transform infrared (FT-IR) spectroscopy and ¹H NMR. FT-IR was also used to study the environment of lithium ions doped in these network polymer electrolytes. Three important groups are considered: N-H, carbonyl, and ether groups. The thermal properties of the polymer electrolytes were measured by differential scanning calorimetry and thermogravimetric analysis. The T_g value of this polymer is less than that of a general comb-like polymer. Added lithium ions interact with the oxygen atoms on ether groups, causing the T_g of the polymer electrolyte to increase. Moreover, the interaction between lithium ions and ether groups decreases the decomposition temperature of the polymer. The conductivity measured by AC impedance reached a maximum of 10⁻⁴ S cm⁻¹. A plot of conductivity vs. temperature fit the Vogel-Tamman-Fulcher equation, indicating that ionic mobility in this network polymer electrolyte is coupled to segmental chain movements.     

Ion conductivity studies of blends of poly(methyl methacrylate)-g-poly(ethylene glycol) and poly(ethylene glycol) complexed with LiCF3 SO3

Polymer electrolytes which are adhesive, transparent, and stable to atmospheric moisture have been prepared by blending poly(methyl methacrylate)-g-poly(ethylene glycol) with poly(ethylene glycol)/LiCF₃ SO₃ complexes. The maximum ionic conductivities at room temperature were measured to be in the range of 10⁻⁴ to 10⁻⁵ s cm⁻¹. The clarity of the sample was improved as the graft degree increased for all the samples studied. The graft degree of poly(methyl methacrylate)-g-poly(ethylene glycol) was found to be important for the compatibility between the poly(methyl methacrylate) segments in poly(methyl methacrylate)-g-poly(ethylene glycol) and the added poly(ethylene glycol), and consequently, for the ion conductivity of the polymer electrolyte. These properties make them promising candidates for polymer electrolytes in electrochromic devices. © 1996 John Wiley & Sons, Inc.     

A novel “inorganic salt-polymer salt” hybrid system as a solid state electrolyte

Poly{2-methacryloyl-3-[ω-methoxyoligo(oxyethylene)]propanesulfonate lithium} (PMMOEPLi), a new kind of polymer salt intended for “inorganic salt-polymer salt” hybrid systems, was synthesized. This polymer salt has high flexibility and high polarity. Upon addition of PMMOEPLi to LiClO₃ based electrolytes, ionic conductivities as high as 10⁻³ S/cm were obtained at ambient temperature. In the electrolyte studied Li⁺ dominates the conductivity, making this material a good candidate for application in lithium rechargeable batteries.     

CATIONIC CONDUCTIVITY FOR THE CROSSLINKED P [OLIGO (OXYETHYLENE) METHACRYLATE-COoMETHACRYLOYL ALKYLSULFONIC ACID LITHIUM]

Crosslinked copolymers with single Li~+-ionic conductivity were prepared from oligo (oxyethylene) methacrylate (MEO_n), methacryloyl alkylsulfonic acid lithium (SAMLi), and oligo (oxyethylene) dimethacrylate (DMEO_n). Li~+-ionic conductivity of the copolymer is improved by crosslinking and presented as a function of polymerization degree (n) in MEO_n, comonomeric salt concentration (O/Li), and crosslinking degree. The crosslinked copolymer P (0.7 MEO_(14)-0.3DMEO_(14)-SHMLi) without other small molecular additives exhibits an optimum Li~+-ionic conductivity of 1.2×10~(-6) S/cm at 25℃. Dc polarization test in the cell composed of Li/copolymer/Li shows a constant dc ionic conductivity which closes gradually to the ac one with decreasing dc polarization potential.     

P(VAc-MMA)为基体的聚合物电解质研究

以醋酸乙烯酯(VAc)和甲基丙烯酸甲酯(MMA)为单体, 采用半连续种子乳液聚合法制备了无规共聚物聚(醋酸乙烯酯-甲基丙烯酸甲酯)[P(VAc-MMA)], 并以此聚合物为基体制备了聚合物电解质. 用红外光谱(FTIR)、核磁共振氢谱(¹H NMR)、扫描电镜(SEM)、差热/热重分析(DSC/TG)、X射线衍射(XRD)、机械性能测试和电化学交流阻抗等方法对聚合物和聚合物电解质的性质进行了研究. 测试结果表明: VAc和MMA聚合生成P(VAc-MMA); 聚合物膜含有大量微孔结构, 利于离子传输; 聚合物电解质膜具有优良的热稳定性和机械强度; 25 ℃下, 最高的离子电导率达到了1.27× 10^－3 S•cm^－1; 离子电导率随着温度的升高而迅速增加, 电导率-温度曲线符合Arrhenius方程.     

Electroactive block copolymers

Synthesis, characterization and properties of microphase separated mixed (ionic and electronic) conducting or MIEC block copolymers are reported. Poly{[ω-methoxyocta(oxyethylene) methacrylate]-block-(4-vinylpyridine)}, abbreviated as P[MG8–4VP], and poly{(3-methylthiophene)-block-[(ω-methoxyocta(oxyethylene) methacrylate]}, abbreviated as P[3MT-MG8], have been synthesized. Differential scanning calorimetry (DSC) studies indicate that the polymers form a microphase separated structure. P[3MT-MG8] can be doped with I₂ and LiClO₄ to generate electronic and ionic conducting microdomains, respectively. For the P[3MT-MG8] series, bulk electronic conductivity as high as 1×10⁻³ S cm⁻¹ and bulk ionic conductivity as high as 6.6×10⁻⁷ S cm⁻¹ is observed at 30°C. This work represents a new concept in the area of electroactive polymers and should impact the microelectrochemical device industry.     

Effect of ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide on the properties of poly(glycidyl methacrylate) based solid polymer electrolytes

A free standing polymer electrolytes films, containing poly(glycidyl methacrylate) (PGMA) as the polymer host, lithium perchlorate (LiClO₄), and ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl) imide [Bmim][TFSI] as a plasticizer was successfully prepared via the solution casting method. The XRD analysis revealed the amorphous nature of the electrolyte. ATR-FTIR and thermal studies confirmed the interaction and complexation between the polymer host and the ionic liquid. The maximum ionic conductivity of the solid polymer electrolyte was found at 2.56 × 10^–5 S cm^–1 by the addition of 60 wt % [Bmim][TFSI] at room temperature and increased up to 3.19 × 10^–4 S cm^–1 at 373 K, as well as exhibited a transition of temperature dependence of conductivity: Arrhenius-like behavior at low and high temperatures.     

Anionic Conduction in Blends of Poly(Pyridinium Ethyl Methacrylate Perchloride) and Poly[Oligo(Oxyethylene) Methacrylate-Co-Acrylamide]

Abstract

Blends of poly(pyridinium ethyl methacrylate perchloride) and poly[oligo(oxyethylene) methacrylate-co-acrylamide] were prepared, and the ionic conductivity and mobility of the blends were investigated. Results indicate that both the transference of perchlorate anion and the dissociation of the polymeric salt in the comblike polyether obey the thermoactivation mechanism, and that the perchlorate anion in the blends is free.     

Polymer solid electrolytes from the PEG-PMMA-LiCF3SO3 system

Highly conductive solid polymeric electrolytes based upon low molecular weight poly(ethylene glycol) and ethylene oxide/propylene oxide copolymers blended with up to 50% by volume of poly(methyl methacrylate) have been synthesized using LiCF₃SO₃ (25:1 ether oxygen to cation ratio). Room-temperature ionic conductivities were measured to be in the range 10^?4 to 10^?5 S/cm for poly(methyl methacrylate) concentrations up to 30% by volume. In some cases, the addition of the poly(methyl methacrylate) enhanced the conductivity. All of the electrolytes studied were either amorphous or crystallized below 0°C. The variation of conductivity with temperature and polymer composition was measured and the results were analyzed in terms of effective medium theory and semiempirical considerations. Ionic transport is coupled to the structural relaxation of the polymer segments. At lower temperatures activated processes were required. Both charge carrier mobility and charge concentration were found to contribute to conduction. The effective medium theory quantitatively describes conductivities of amorphous heterogenous systems of limited miscibility (microphase separation) quite well. For miscible or partially crystalline systems other effects not incorporated in this theory play an important role, and conductivities are measured to be higher than theoretically predicted. © 1994 John Wiley & Sons, Inc.     

Conductivity–modulus–Tg relationships in solvent-free,single lithium ion conducting network electrolytes

A model system of single-ion conducting network electrolytes with acrylic backbone, ethylene oxide (EO) side chains, tethered fluorinated anions, and mobile Li cations was designed and synthesized to investigate structure–property relationships. By systematically tuning four molecular variables, one at a time, we investigated how crosslinker length, mol% of crosslinker added, Li:EO ratio and side-chain length affect conductivity, T_g, and modulus. Ionic conductivity at 90 °C varied by two orders of magnitude (and by three orders of magnitude at room temperature) depending on the molecular details, while a 70 °C span in glass transition temperature (T_g) was observed. The range of crosslinking, which can be achieved without impacting conductivity was also elucidated, and the modulus of the electrolyte can be increased by a factor of 8, up to 2.4 MPa, without impacting ion transport. Changes in conductivity due to crosslink density and crosslinker length are fully explained in terms of T_g shifts, while comonomer length cannot be accounted for by such a shift. The best performing network exhibited 10⁻⁵ S/cm at high temperature, which is comparable to other single-ion conductors reported in the literature, while the modulus is higher due to crosslinking. Adding 10 wt% propylene carbonate further increased this value to 10⁻⁴ S/cm. This work provides insights into the structure–property relationships of solid-state polymer electrolytes, which retain conductivity but can potentially help suppress dendrites.     

Evaluating the electrochemical properties of PEO‐based nanofibrous electrolytes incorporated with TiO2 nanofiller applicable in lithium‐ion batteries

In the present work, nanofibrous composite polymer electrolytes consist of polyethylene oxide (PEO), ethylene carbonate (EC), propylene carbonate (PC), lithium perchlorate (LiClO₄), and titanium dioxide (TiO₂) were designed using response surface method (RSM) and synthesized via an electrospinning process. Morphological properties of the as‐prepared electrolytes were studied using SEM. FTIR spectroscopy was conducted to investigate the interaction between the components of the composites. The highest room temperature ionic conductivity of 0.085 mS.cm^?1 was obtained with incorporation of 0.175 wt. % TiO₂ filler into the plasticized nanofibrous electrolyte by EC. Moreover, the optimum structure was compared with a film polymeric electrolyte prepared using a film casting method. Despite more amorphous structure of the film electrolyte, the nanofibrous electrolyte showed superior ion conductivity possibly due to the highly porous structure of the nanofibrous membranes. Furthermore, the mechanical properties illustrated slight deterioration with incorporation of the TiO₂ nanoparticles into the electrospun electrolytes. This investigation indicated the great potential of the electrospun structures as all‐solid‐state polymeric electrolytes applicable in lithium ion batteries.     

Enhanced ionic conductivity in PEO/PMMA glassy miscible blends: Role of nano‐confinement of minority component chains

AC impedance spectroscopy was used to investigate the ionic conductivity of solution cast poly(ethylene oxide) (PEO)/poly(methyl methacrylate) (PMMA) blends doped with lithium perchlorate. At low PEO contents (below overlap weight fraction w^*), ionic conductivities are almost low. This could be due to nearly distant PEO chains in blend, which means ion transportation cannot be performed adequately. However, at weight fractions well above w^*, a significant increase in ionic conductivity was observed. This enhanced ionic conductivity mimics the PEO segmental relaxation in rigid PMMA matrix, which can be attributed to the accelerated motions of confined PEO chains in PMMA matrix. At PEO content higher than 20 wt % the conductivity measured at room temperature drops due to crystallization of PEO. However by increasing temperature to temperatures well above the melting point of PEO, a sudden increase of conductivity was observed which was attributed to phase transition from crystalline to amorphous state. The results indicate that some PEO/PMMA blends with well enough PEO content, which are structurally solid, can be considered as an interesting candidate for usage as solid‐state electrolytes in Lithium batteries. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 2065–2071, 2010     

Poly(oxyethylene methacrylate)–poly(4-vinyl pyridine) comb-like polymer electrolytes for solid-state dye-sensitized solar cells

Poly(oxyethylene methacrylate)–poly(4-vinyl pyridine) (POEM–P4VP) comb-like copolymers with 3:7, 5:5, and 6:4 wt ratio were synthesized via atom transfer radical polymerization and confirmed by ¹H-NMR and FT-IR spectroscopy. The copolymers were quaternized with 1-iodopropane to convert the pyridine groups into pyridinium ions, i.e., POEM–qP4VP. Transmission electron microscopy showed that strongly segregated microphase separation in POEM–P4VP was less prominent upon quaternization due to interactions between the ether oxygens of POEM and the quaternized pyridine groups of qP4VP, as confirmed by FT-IR spectroscopy. The energy conversion efficiencies of dye-sensitized solar cells (DSSCs) with quaternized polymer electrolytes were always greater than those with pristine electrolytes due to greater ionic conductivity and concentrations of free iodide ions. The maximum energy conversion efficiency of a DSSC employing POEM–qP4VP electrolyte reached 3.0% at 100 mW/cm² when a 6:4 wt.% of POEM–qP4VP was used.     

Single-Li~+ conductivity in ionomeric network

Ionomeric networks(IN)with lithium sulfate and sait-solvating oligo(oxyethylene)chainwere synthesized on the purpose of improving the conductivity of single-Li~+-ionic conductors.Li~+-ionicconductivity depends considerably on the salt content of the INs although the apparent degree of cross-linking is fixed in a constant of 10 mol%.As salt content(Li/O value)equals 0.0467,conductivity ofthe IN containing neither small-molecular salt nor low molecular weight plasticizer reaches a maximumof 7×10~(-6) S/cm at 25℃.Temperature-conductivity relationship of the INs shows curved Arrheninsplots,suggesting that the ionic conduction is primarily influenced by segmental motion of the polymerhost.In addition,WLF(Williams-Landel-Ferry)equation is used to analyze the conductivity data,from which the related WLF parameters are determined.     

THERMAL BEHAVIOR AND IONIC CONDUCTIVITY OF POLY[LITHIUM-N(4-SULFO-PHENYL) MALEIMIDE -CO-METHOXY OLIGO(OXYETHYLENE) METHACRYLATE]

Poly[lithium-N(4-sulfophenyl) maleimide -co- methoxy oligo-(oxyethylene) methacrylates] [P(LiSMOE_n)s] with three different oligoether side chains and different salt concentrations were synthesized. The copolyelectrolytes are essentially random in structure, with blocks of methoxy oligo(oxyethylene) meth-acrylate (MOE_nM) recurring sporadically in between the salt units of N(4-sulfophenyl) maleimide. They all show two glass transitions in the temperature range of ?100 to 100°C. The first one below ?30°C is assigned to the oligo(oxyethylene) side chain (T _g1), while the second one located between 20 and 50°C is attributed to the main chain of the polymer host (T _g2). The maximum ionic conductivity of the copolymer electrolytes, 1.6 × 10^?7 S cm^?1 at 25°C, occurs at lithium salt concentration [Li⁺]/[EO] = 2.2 mol%. The ionic conductive behavior of the copolyelectrolytes follows the Vogel-Tammann-Fulcher (VTF) equation. Moreover, a special VTF behavior exists in the copolymers with shorter oligoether side chain and higher salt concentration. Sweep voltammetric results indicate that these copolyelectrolytes have a good electrochemical stability window.