Regular copolyamides. II. Preparation and characterization of regular aliphatic copolyoxamides

Regular copolyoxamides were prepared from diamine-oxamides and aliphatic diacid chlorides by interfacial and solution polymerization. Interfacial polymerization is preferred with diamineoxamides where the diamine portion has two to six methylene groups and the diamine-oxamides are readily soluble in water. Regular aliphatic polyoxamides from diamine-oxamides are readily soluble in water. Regular aliphatic polyoxamides from diamine-oxamides with more than six methylene groups in the diamine portion of the molecule are better prepared by solution polymerization in dimethyl acetamide. Regular aliphatic oxamides are soluble in trifluoroacetic acid and hexafluoroisopropanol and show a considerable alternation of the melting point behavior in the diamine portion of the polyamides with up to five methylene groups. Copolyoxamides with two and four methylene groups melt higher than the copolyoxamides with three and five methylene groups. Aliphatic copolyoxamides/adipamides melt at approximately 260°C and show a steady decrease in melting points to about 220°C for polyoxamides with twelve methylene groups.     

Regular Copolyamides. IX. Some Aliphatic Aromatic Copolyoxamides

Abstract

Aromatic/aliphatic regular copolyoxamides were prepared from aromatic diamine-oxamides and aliphatic diacid chlorides of various lengths of methylene groups by solution polymerization. The aromatic diamine oxamides, N,N′-bis(4-aminophenyl)oxamide and N,N′-bis(3-aminophenyl)oxamide were prepared and both were reacted with adipoyl chloride, suberoyl chloride, and sebacoyl chloride to form six new regular copolyoxamides. The polymers formed were soluble in sulfuric acid and also in some polar amide solvents. All copolyoxamides were high melting, with the meta-phenylene copolyoxamides melting from 346 to 373°C with decreasing length of the aliphatic diacid chloride, and the para-phenylene copolyoxamides decomposing prior to melting at near 400°C. The new polymers were characterized by UV spectrophotometry, differential scanning calorimetry, and thermal gravitational analysis.     

Novel ferrocene modified poly(amide ether amide)s and investigation of physical and thermal properties

A new diamine containing ferrocene group with preformed ether and amide units was prepared via reaction of 1,1′-ferrocenedicarbonyl chloride with two moles of 2,6-bis(5-amino-1-naphthoxy)pyridine. Polycondensation reactions of the prepared diamine with different aromatic and aliphatic diacid chlorides in the presence of trimethylchlorosilane (TMSCl) resulted in preparation of novel ferrocene modified poly(amide ether amide)s. The monomer and polyamides were characterized and the effect of trimethylchlorosilane (TMSCl) as activating agent on the polymerization reaction was studied. The physical and thermal properties of the polyamides including inherent viscosity, solubility, thermal stability and behavior, flame-retardancy and crystallinity of the polymers were studied. The polymers showed good thermal stability and flame-retardancy, and also improved solubility in polar aprotic solvents.     

Regular copolyamides. I. A facile method for the preparation of diamine-oxamides

α,ω-Diamine-oxamides with 2–12 CH₂ groups between the two amino groups were obtained by the reaction of the diamines and diethyl or dimethyl oxalate. Diethyl oxalate is added slowly to a substantial excess of diamine in the proper solvent over a period of time under controlled temperature conditions. All variables are very important for each individual diamine in order to obtain optimal conversions to the diamine-oxamides under the most favorable conditions. Diamine-oxamides were obtained in approximately 80% yield with only small amounts (5–10%) of the corresponding polyoxamides as the side product. Diamine-oxamides from diamines with less than six methylene groups are water-soluble. All diamine-oxamides show an alternation of their melting points and are useful intermediates for the preparation of regular copolyoxamides.     

Self-regulating polycondensations: Ordered aromatic polyamide-esters

The polycondensation of aminophenols with diacid chlorides was examined to determine if the amide-ester polymers obtained are random or ordered. All of the evidence obtained points to the conclusion that ordered copolymers indeed are prepared and that a “self-regulating” polymerization process is operating by virtue of the considerably greater reactivity of aromatic amino groups relative to phenol groups. The first step of the reaction involves the in situ preparation of a diphenol-amide which undergoes further condensation. The diphenol-amide intermediate may be isolated or reacted in situ. In addition to the ordered polymer from a given aminophenol and a single diacid chloride, ordered copolymers from two different diacid chlorides were prepared in which the diacid moieties appear in an alternating fashion; the structure of such polymers depends on the order of addition of the diacid chlorides. Corresponding polymers also may be prepared from the preformed diphenol-amide monomers. The molecular weights of certain of the polymers were sufficient for the preparation of films which could be hot-stretched severalfold. Interfacial polycondensations gave polymers of higher inherent viscosities than did solution polymerizations when aminophenols or diphenol-amide monomers were condensed with diacid chlorides.     

Interfacial polycondensation reactions of the new monomer 1,1′-bis(β -aminoethyl)ferrocene

Condensation polymerizations of several ferrocenecontaining monomers have been investigated, using low temperature interfacial and solution techniques. 1, 1′-bis(β-aminoethyl)ferrocene was synthesized via a 6-step process starting with ferrocene. This monomer was then copolymerized with various aromatic and aliphatic diacid chlorides as well as with diisocyanates, leading to ferrocene-containing polyamides and polyureas having moderately high to low viscosities. Using the interfacial method, film formation occurred for the polyamides. The related monomer 1,1′-bis(β-hydroxyethyl)ferrocene reacted with diacid chlorides and diisocyanates to form ferrocenecontaining polyesters and polyurethanes, respectively, using the solution method. The ferrocenecontaining condensation polymers were characterized by IR spectroscopy and examined for possible liquid crystalline behavior.     

Extended-chain polyamides: Polyoxamides and polyfumaramides

The synthesis of polyamides from short-chain aliphatic diacids, such as oxalic and fumaric acids, is difficult because of the thermal instability and volatility of the intermediates and side reactions with the polymerization media. A variety of synthetic routes to these polymers has been explored. Several aromatic polyoxamides with high molecular weight were obtained in high yield by an acid chloride vapor-solvent-water interfacial process. Polyoxamides of intermediate molecular weight also were obtained by preparation of oligomers from diamines and oxalic diesters and condensing these oligomers further in a thermal polymerization step. Aromatic polyfumaramides and terephthalamidefumaramides were prepared by modified solution procedures in amide solvents. Another route to polyfumaramides was the synthesis of N,N′-bis(4-aminophenyl) fumaramide and its use as a diamine with diacid chloride. The 1,4-phenylene and benzidine polyfumaramides and oxamides have extended-chain structures in solution in sulfuric, chlorosulfonic, and fluorosulfonic acids. Some of the polymers were soluble enough to yield liquid crystalline solutions. High-tenacity high-modulus fibers from poly(1,4-phenylene fumaramide/terephthalamide)s are described.     

Novel pyridine-based ether ester diamine and resulting thermally stable poly (ether ester amide)s

A novel pyridine-based ether ester diamine was prepared in three steps. Reaction of 1,5-dihydroxy naphthalene with 4-nitrobenzoyl chloride afforded 5-hydroxy-1-naphthyl-4-nitrobenzoate (HNNB). Reduction of nitro group resulted in preparation of an amino compound named 5-hydroxyl-1-naphthyl-4-aminobenzoate (HNAB). The diamine was synthesized by nucleophilic substitution reaction of 5-hydroxyl-1-naphthyl-4-aminobenzoate with 2,6-dichloropyridine in the presence of K₂CO₃. The obtained diamine was fully characterized and used to prepare novel thermally stable poly (ether ester amide)s via polycondensation reaction with different aromatic and aliphatic diacid chlorides. All the polymers were characterized and their physical and thermal properties were studied.     

Syntheses and Investigation of Some New Polyarylates and Copolyarylates. Part I

By the interfacial condensation of acid chlorides I, II, and III, respectively, with bifunctional phenols (IV-X), soluble or mold-able thermostable polyarylates were obtained. Similarly, copolyarylates were prepared from a mixture of the acid chlorides I + II or I + III. With bisphenol-A (VIII), soluble polymers are usually obtained. Methylene dichloride and/or carbon tetra-chloride-water systems were the best media for interfacial condensations, and the polymers formed showed the highest reduced viscosity values.

Polyester films are useful in many industrial applications because of their broad range of mechanical, optical, and electrical properties. The aromatic polyesters‐polyarylates-dominate the field of industrial polyester films [1].

Polyarylates prepared from dihydric phenols and purely aromatic dicarboxylic acid chlorides are highly heat resistant materials [2], but they are insoluble and nonmoldable [3]. However, by the introduction of ether linkages in the aromatic dicarboxylic acid moiety, soluble and/or moldable polyamides were obtained [4].     

Preparation and properties of aromatic–aliphatic copolyamides from aromatic diisocyanates and dicarboxylic acids

Aromatic–aliphatic random copolyamides of high molecular weights were prepared by the high-temperature solution polycondensation from a combination of aromatic diisocyanates, 4,4′-methylenedi(phenyl isocyanate), and 2,4-tolylene diisocyanate, and a mixture of isophthalic acid and aliphatic dicarboxylic acids with 4–10 methylene groups. Reaction conditions, such as solvent, temperature, time, and catalyst were studied to determine the optimum conditions for the preparation of high molecular weight polymers. Glass transition temperatures of the copolyamides were in the range of 131–244°C and varied with combination and composition of the diisocyanates and dicarboxylic acids used. The copolyamides prepared from 2,4-tolylene diisocyanate had greater solubility and higher glass transition temperatures than those obtained from 4,4′-methylenedi(phenyl isocyanate).     

New polymer syntheses XII. Polyketones based on diarylidenecycloalkanones

Two new series of polyketones containing diarylidene links was synthesized by the Friedel-Crafts polymerization of diarylidenecyclopentanone or diarylidenecyclohexanone with aromatic diacid chlorides, azodibenzoyl chlorides, or aliphatic diacid chlorides. The resulting polymers had inherent viscosities in the range 0.76-1.18 dl/g and showed poor solubilities to common organic solvents excepts strong acids. The thermal stabilities of these polymers were evaluated and correlated to their structural units by thermogravimetric analysis (TGA), DTG and DSC measurements. The TGA data revealed 10% weight losses at 190-300 °C. Moreover, the crystallinity of some polymers were tested by X-ray analyses and the UV-visible spectra showed characteristic absorption bands in the range 240-350 nm.     

Synthesis and characterization of novel soluble triphenylamine‐containing aromatic polyamides based on N,N′‐bis(4‐aminophenyl)‐N,N′‐diphenyl‐1,4‐phenylenediamine

A new triphenylamine‐containing aromatic diamine, N, N′‐bis(4‐aminophenyl)‐N, N′‐diphenyl‐1,4‐phenylenediamine, was prepared by the condensation of N,N′‐diphenyl‐1,4‐phenylenediamine with 4‐fluoronitrobenzene, followed by catalytic reduction. A series of novel aromatic polyamides with triphenylamine units were prepared from the diamine and various aromatic dicarboxylic acids or their diacid chlorides via the direct phosphorylation polycondensation or low‐temperature solution polycondensation. All the polyamides were amorphous and readily soluble in many organic solvents such as N, N‐dimethylacetamide and N‐methyl‐2‐pyrrolidone. These polymers could be solution cast into transparent, tough, and flexible films with good mechanical properties. They had useful levels of thermal stability associated with relatively high glass‐transition temperatures (257–287 °C), 10% weight‐loss temperatures in excess of 550 °C, and char yields at 800 °C in nitrogen higher than 72%. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2810–2818, 2002     

Heterocyclic Polyimides

This paper presents the synthesis of certain polyimides which contain one of the following heterocycles: oxadiazole, benzox-azinone, benzthiazole. Their properties, particularly thermal stability and hydrolytic stability, are compared to fully aromatic polyimides. Poly-1,3,4-oxadiazole-imides have been synthesized either by the reaction of ditetraeole monomers which contain preformed imide cycles with diacid chlorides, or by the reaction of an aromatic diamine containing a preformed oxadiazole ring with diacid chlorides containing preformed imide rings. Polybenz-oxazinone-imides have been synthesized by polycondensation of a bis(amino acid), 4,4′-diaminodiphenylmethane-3,3′-dicarboxylic acid, with diacid chlorides containing preformed imide rings. Polybenzthiazole-imides have been obtained by polycondensation of aromatic diamines containing a preformed benzthiazole ring with diacid chlorides containing preformed imide rings. Thermal stabilities of these heterocyclic polyimides are similar and in certain cases are higher than those of fully aromatic polyimides. It was also found that the hydrolytic stability of heterocyclic polyimides is definitely superior to that of aromatic polyimides.     

Poly(sulfone ether amide amide)s as a new generation of soluble, thermally stable polymers

A new sulfone ether amide diamine was synthesized via three steps, starting from reaction of 4-aminophenol with 4-nitrobenzoyl chloride in the presence of propylene oxide afforded N-(4-hydroxy phenyl)-4-nitrobenzamide (HPNB). In the next step, reduction of nitro group resulted in preparation of 4-amino-N-(4-hydroxy phenyl) benzamide (AHPB). Final step in the preparation of diamine was the reaction of AHPB with bis(4-chlorophenyl) sulfone in the presence of K₂CO₃. All the materials were characterized using conventional spectroscopic methods. Poly(sulfone ether amide amide)s were synthesized by polycondensation reactions of prepared diamine with different diacid chlorides (aromatic and aliphatic ones). The obtained polymers were fully characterized and their physical properties including thermal behavior, thermal stability, solubility, and inherent viscosity were studied.     

Synthesis of inherently dissymmetric polyamides,

The preparation of polyamides from derivatives of optically active biphenic acid is described. The diacid chlorides chosen were 2,2′-dinitro-6,6′-dimethylbiphenyl-4,4′-dicarbonyl chloride and 2,2′-dichloro-6,6′-dimethylbiphenyl-4,4′-dicarbonyl chloride, the diamines were phenyldiamines (o-, m-, p-) piperazine, trans-2,5-dimethylpiperazine, and 1,2-piperaazolidine. Polymerization was carried out by the method of interfacial polycondensation. The polymers of aromatic diamines were insoluble in common organic solvents but soluble in dimethylformamide containing 5% lithium chloride, triesters of phosphoric acid, and methanesulfonic acid. The polymers of aliphatic diamines were also insoluble in common organic solvents but soluble in trifluoroethanol. All polymers had melting points higher than 280°C.     

Aromatic Polyamides of 2,6-Naphthalenedicarboxylic Acid

Wholly aromatic polyamides have been prepared by the interfacial polycondensation of 2,6-naphthalenedicarboxylic acid chloride with m-phenylenediamine. Also, copolyamides with isophthaloyl or terephthaloyl chlorides and the naphthalene diacid chloride were synthesized. The resultant polyamides were amorphous or slightly crystalline as determined by x-ray diffraction, had tensile properties characteristic of hard, strong materials, and were more thermally stable than aromatic polyamides prepared solely from benzene diacid chlorides.     

Sulfur-containing polymers. II. Preparation and properties of polycarbamoylsulfenamides

Polycarbamoylsulfenamides have been prepared by interfacial and solution polycondensation of chlorocarbonylsulfenyl chloride with diamines. In preparing the polycarbamoylsulfenamides, the following types of diamines were used: primary aliphatic diamines, a mixed primary-secondary aliphatic diamine, primary aromatic diamines, and secondary aromatic diamines. The properties of the resulting polymers depended primarily on the kind of diamines used. Transparent, tough films were obtained from the polymer based on N,N′-dimethyl-4,4′-diaminodiphenylmethane. The photochemical decomposition of the polymers has been studied.     

Synthesis and characterization of random poly(amide-sulfonamide)s. II. Polymers from unsymmetrical diamine monomers

Novel poly(amide-sulfonamide)s have been prepared by reacting terephthalic, isophthalic, and sebacic acid and their acid chlorides with variously substituted diamines containing preformed sulfonamide linkages utilizing solution polymerization techniques. Inherent viscosities of the prepared polymers varied from 0.22 to 1.21 dL/g. Those having inherent viscosities greater than 0.4 dL/g formed clear, tough, flexible films. Glass transition temperatures ranged from 87 to 273°C. Thermogravimetric analyses of the polymers showed moderate thermal stability.     

Soluble,thermally stable,flame retardant quinoline-based poly(ester amide)s

A new diamine was prepared via reaction between 8-hydroxy-5-nitroquinoline and 4-nitrobenzoyl chloride, followed by reduction of the nitro groups of the resulted compound. Novel quinoline-based poly(ester-amide)s were produced through polycondensation reactions of the prepared diamine with different diacid chlorides. The monomer and poly(ester-amide)s were characterized and properties of the polymers including solution viscosity, thermal behavior and stability, solubility, and crystallinity were studied.

High thermal stability and improved solubility was observed for the polymers, indicating successful designing of monomer and related polymers for overcoming the main issue of thermally stable polymers, i.e. the problem of increasing solubility versus high thermal stability.

Also, by changing the diacid chlorides for the preparation of poly(ester-amide)s, the structure-property relations were investigated.     

Preparation of sulfonyl aromatic polyamides and copolyamides by means of di- or triphenyl phosphite

High molecular-weight aromatic polyamides were obtained by the direct polycondensation reaction of 4,4′-sulfonyldibenzoic acid (SDA) with various aromatic diamines, by means of di- (DPP) or triphenyl phosphite (TPP) in N-methyl-2-pyrrolidone (NMP)-pyridine solution containing metal salts such as LiCl and CaCl₂. The factors affecting the phosphorylation reaction were investigated, in particular for the reaction of SDA and 4,4′-oxydianiline (ODA). For the polymerization by means of TPP, the optimum conditions are: molar ratio of TPP to diacid, higher than 2.3; concentration of metal salts, 8 wt % LiCl or 6 wt % CaCl₂; reaction temperature, 100°C; and monomer concentration, 0.4 mol/L. For the polymerization by means of DPP, the optimum conditions are: molar ratio of DPP to diacid, higher than 3.8; concentration of metal salts of 8 wt % LiCl or 10 wt % CaCl₂; reaction temperature, 110°C; and monomer concentration, 0.4 mol/L. Copolyamides were also prepared from the reaction of ODA with the mixed diacids of SDA and other dicarboxylic acids such as terephthalic acid, isophthalic acid, and 2,6-naphthalene dicarboxylic acid by using TPP and DPP as the condensing agents.