Chemiluminescence method for determination of benzoyl peroxide in solution

The chemiluminescence reaction of benzoyl peroxide with triethylamine is used to quantify benzoyl peroxide. The method is rapid with a detection limit for benzoyl peroxide in chloroform of 0.07 μg ml^?1 and a relative standard deviation of 4% at 1 μg ml^?1. The technique is applied to the determination of benzoyl peroxide in pharmaceutical preparations.     

Catalytic and inhibiting effects of ferrocene on the bulk radical–coordination polymerization of methyl methacrylate from the standpoint of formal kinetics

The kinetic curves and rates of bulk radical–coordination polymerization of methyl methacrylate initiated by the benzoyl peroxide–ferrocene system at 293–373 K, initial benzoyl peroxide concentrations of 10^–4–10^–1 mol/L, and a constant initial ferrocene concentration of 10^–3 mol/L have been calculated using a mathematical model in which the process is considered from the standpoint of formal kinetics. The calculations have demonstrated that, at low methyl methacrylate conversions, ferrocene catalyzes the process at any benzoyl peroxide concentration; at medium and high methyl methacrylate conversions, deficient amounts of ferrocene with respect to benzoyl catalyze the process as well, while excess ferrocene inhibits the process. The observed effect is explained by the specific ferrocene–benzoyl peroxide interaction, which, depending on the ferrocene: benzoyl peroxide ratio, either increases or decreases the concentration of radicals in the reaction mass.     

Comparison of isothermal and non-isothermal chemiluminescence and differential scanning calorimetry experiments with benzoyl peroxide

Difference in the kinetics of chemiluminescence (CL) and differential scanning calorimetry records for decomposition of originally solid benzoyl peroxide continuing as a melt reaction was outlined. While the main portion of heat measured by DSC is released in the spontaneous decomposition of benzoyl peroxide starting as a homolytic scission of peroxidic bonds, the CL light emission in oxygen comes presumably from the subsequent disproportionation reaction of polyphenyl peroxyl radicals and monitors the induced decomposition of peroxide. Thermogravimetry revealed that oxygen remains partially bound to the products of benzoyl peroxide decomposition.     

多壁碳纳米管表面过氧化苯甲酰印迹复合材料的制备及固相萃取应用

以过氧化苯甲酰(BOP)为模板分子,甲基丙烯酸(MAA)为功能单体,乙二醇二甲基丙烯酸酯(EGDMA)为交联剂,偶氮二异丁腈(AIBN)为引发剂,采用热聚合法在多壁碳纳米管(MWNTs)表面制备印迹聚合物(MWNTs-MIPs)。采用红外和热重分析等技术对聚合物结构进行表征。采用液相色谱考察该分子印迹聚合物对过氧化苯甲酰的吸附特性。结果表明该印迹聚合物对过氧化苯甲酰表现出特异性吸附,该印迹聚合物对模板分子存在一种结合位点,其最大表观结合量为56.20 µmol/g。该印迹聚合物成功应用于固相萃取富集面粉中微量过氧化苯甲酰,浓度富集因子为526。     

The Influence of Monomers upon Microemulsions with Short Chain Cosurfactant

Several monomers (i.e., acrylonitrile (ACN), ethyl acrylate (EtA), acrylate of 2 ethylhexyl (EHA), butyl acrylate (BuA), vinyl acetate (VAc), methyl methacrylate (MMA) and styrene (St)) were investigated in order to study their capacities to form microemulsions. The surfactant was nonyl phenol ethoxylate with 25 moles ethylene oxide and ethanol was used as the cosurfactant. The phase diagrams prove that the capacity for microemulsion formation varies in the following sequence: ACN = EtA > VAc > BuA > MMA > St > EHA. Conductometric and refractometric studies allowed us to evidence the formation of microemulsions with W/O, bicontinuous or O/W structure. Fluorescence studies give interesting informations on the stabilization capacity of the monomers dispersed by interaction with hydrophobic chain of the cosurfactant. H-NMR studies suggest that the monomers in microemulsions lie in regions with various polarities as function of their chemical nature. In polymerization initiated with benzoyl peroxide the minimum conversions were obtained in zones of composition where the initial microemulsions possess a bicontinuous microstructure. The reactions of degradative transfer of the increasing macroradicals account for these conversion modifications. For initiation with ammonium persulphate, its rate of decomposition depends on its ability to displace the proton bonded to the substituted vinylic carbon of the monomer. The productivity of this initiator varies within the sequence MMA > EtA > BuA > St > ACN > VAc. The consumption of the initiator, as induced by the monomer, depends on its chemical nature and on the solubilization site of the microemulsions.     

Polymerization of N-vinylcarbazole. II. Kinetic studies on polymerizations involving azoisobutyronitrile and benzoyl peroxide

The polymerization of N-vinylcarbazole at 60°C in benzene has been initiated with azoisobutyronitrile, benzoyl peroxide, and their mixtures. The kinetics indicate that the azonitrile and the peroxide promote polymerizations of fundamentally different types. The resulting polymers have been examined by gel-permeation chromatography. The polymer produced with benzoyl peroxide contains a small amount of a high molecular weight fraction which, from the point of view of end groups, resembles the polymer made by use of the azonitrile. It is concluded that benzoyl peroxide in this system gives rise to two types of polymerization which occur simultaneously.     

过氧化苯甲酰的安全性研究

利用分子结构特性对过氧化苯甲酰的分解原理进行了分析,并通过热分析、撞击感度和爆发点试验对其安全性进行了评价,得到相关的安全数据。     

胶束毛细管电泳在线吹扫富集技术测定面粉中的增白剂过氧化苯甲酰

建立了测定面粉中过氧化苯甲酰含量的一种新方法。面粉用甲醇超声萃取,过滤,直接进样分析。在电泳缓冲液为0.02 mol/L硼砂-硼酸缓冲液（含0.04 mol/L十二烷基硫酸钠）(pH 9.0)、紫外检测波长为214 nm、分离电压为10 kV的条件下,富集倍数可达150倍以上,过氧化苯甲酰的质量浓度和其色谱峰高呈良好的线性关系,过氧化苯甲酰的线性 范围为0.002～0.012 g/L(r=0.9998),最低检测限为2 mg/L。将该法用于面粉中过氧化苯甲酰的分析,样品无需繁琐的预处理过程便可直接定量,缩短了分析周期,简单方便,重现性好。     

60Co-initiated polymerization of styrene,vinyl acetate,and their mixtures in the presence of a radical initiator

Styrene and vinyl acetate have been polymerized by γ-radiation in the presence of α,α′-azobisisobutyronitrile or benzoyl peroxide. Benzoyl peroxide does not affect the vinyl acetate polymerization, but the rate of polymerization is greatly increased by the action of the initiator in the case of the following systems: styrene–α,α′-azobisisobutyronitrile, styrene–benzoyl peroxide, and vinyl acetate–α,α′-azobisisobutyronitrile. For these three systems, the experimental results are in good agreement with a kinetic scheme obtained by assuming an energy transfer process from monomer excited molecules to the initiator; this process does not occur in the first system, and the initiation rate is determined only by the vinyl acetate concentration. In the case of the polymerization of mixtures of the two monomers, the action of α,α′-azobisisobutyronitrile and that of benzoyl peroxide are practically the same; that is, the shape of the polymerization curve may be understood on the basis of an energy transfer from styrene excited molecules to the initiator.     

过氧化苯甲酰的测定与应用研究

本文提出了一种以丙酮为溶剂,柠檬酸为催化剂和掩蔽剂的间接磺量法以测定过氧化苯甲酰。该方法简便易行,重现性好,准确度高,测定结果令人满意。     

The Role of a Metallocene Additive in Radically Initiated Polymerization when Solving Direct and Inverse Kinetic Problems

Polymerization of methyl methacrylate, initiated by benzoyl peroxide in the presence of titanocene dichloride, is considered from the point of view of formal kinetics. Based on the kinetic scheme of the process (which includes the reactions of classical radical polymerization, the reaction of benzoyl peroxide with titanocene dichloride, the reactions of the controlled radical polymerization of organometallic mediated radical polymerization (OMRP) and atom transfer radical polymerization (ATRP), the reaction of the formation of a coordinating active site and the coordinating chain propagation on a mathematical model of the kinetics of the process is created. This model also makes it possible to calculate the molecular-mass characteristics of poly(methyl methacrylate). As a result of the solution of the inverse kinetic problem at a temperature of 343 K, the values of the reaction rate constants of the kinetic scheme are found under which the discrepancy between the calculated models and experimental data is minimal. Using the developed model of the kinetics of the process, a numerical experiment is performed (i.e., a direct kinetic problem is solved). This problem revealed the following regularities of the process. (1) An increase in the initial concentration of titanocene dichloride at a constant initial concentration of benzoyl peroxide leads to an increase in the rate of consumption of benzoyl peroxide but not to an increase in the initial rate of the process compared to classical radical polymerization. (2) With an increase in the initial concentration of titanocene dichloride, the lifetime of the macroradicals at the initial stage of the process is reduced, and hence the molecular weight of the resulting polymethyl methacrylate is less than that of the polymethyl methacrylate obtained in the absence of titanocene dichloride, and it will increase during the process of approaching the final values. (3) During the polymerization of methyl methacrylate, initiated by benzoyl peroxide in the presence of titanocene dichloride, a smoothing gel effect (as in the case of the polymerization of methyl methacrylate initiated by benzoyl peroxide in the presence of ferrocene) does not occur since titanocene dichloride forms stable complexes with methyl methacrylate and, consequently, it participates in reactions consuming macroradicals to a lesser degree than ferrocene.     

Kinetics and Mechanism of Oxidation of Dimethyl Sulfoxide with Benzoyl Peroxide in Superbasic Media

Oxidation of dimethyl sulfoxide with benzoyl peroxide in some dipolar aprotic solvents and superbasic media was studied. The kinetic parameters were correlated with the main physicochemical characteristics of solvents. The oxidation rate grows with increasing donor number and polarizability of the solvent. A two-step scheme of dimethyl sulfoxide oxidation with benzoyl peroxide in superbasic media was suggested, involving preliminary cleavage of the peroxide to perbenzoate with the base. In the reaction, sodium tert-butylate is preferable over sodium hydroxide.     

气相色谱法测定小麦粉中过氧化苯甲酰的不确定度分析

利用小麦粉中的过氧化苯甲酰定量检测方法和有代表性的小麦粉样品的实验数据,通过不确定度来源的分析,运用现代误差理论,研究了气相色谱法测定小麦粉中的过氧化苯甲酰的不确定度的评价方法.实验表明小麦粉中过氧化苯甲酰的浓度为0.068 5 g/kg,扩展因子k为2时,总不确定度UC为0.013 1 g/kg.     

过氧化苯甲酰的光敏电荷转移分解反应及引发甲基丙烯酸甲酯的聚合

过氧化苯甲酰(BPO)的光诱导分解曾为许多工作者所注意。Walling和Gibian认为:以二苯酮为敏化剂时,BPO的敏化光解是通过三重态的能量转移过程。Encinas和Lissi则认为敏化是通过单重激发态使激发能转移至过氧化物基态的热振动态,从而导致过氧化物的分解。Tokumarur是最早提出过氧化苯甲酰光敏化诱导分解过程中存在着激基复合物(Exciplex)的可能性。最近他们又进一步研究以BPO为猝灭剂去猝     

过氧化苯甲酰的光敏电荷转移分解反应及引发甲基丙烯酸甲酯的聚合

The mechanism of photosensitized decomposition of benzoyl peroxide by several anthracene derivatives has been studied. It comfirms that the photosensitized process is carried out by electron transfer.It is discovered that benzoyl peroxide can be decomposed by sensitizer of different anthracene derivatives which are used either electron donor or acceptor and the active radical which produces in this reaction can initiate the polymerization of MMA. It is considered that the BPO with positive charge in the charge transfer complex is easier to decompose into radical than that with negative charge,so the rate (Rp) of polymerzation of MMA in-itiated by the system of DCA/BPO has higher value than others.     

柱后衍生-高效液相色谱-荧光检测法测定面粉中的过氧化苯甲酰

利用过氧化苯甲酰能够在氯化血红素的催化下将底物对羟基苯乙酸氧化成具有荧光的二聚体的性质,建立了柱后衍生-高效液相色谱-荧光检测法测定面粉中过氧化苯甲酰的方法。优化了色谱分离条件和柱后衍生条件,结果表明:催化剂氯化血红素的浓度为8μmol/L,底物对羟基苯乙酸的浓度为80μmol/L,衍生化试剂的pH 10.5,衍生温度为35℃时衍生效率最高。在优化条件下,过氧化苯甲酰的线性范围为0.5～100 mg/L;样品的检出限为1 mg/kg,样品的加标回收率为98.5%～99.5%。本方法与现有的高效液相色谱法相比,检测面粉中过氧化苯甲酰具有抗干扰能力强,灵敏度高。     

过氧化苯甲酰的热分解研究

The thermal decomposition process of benzoyl peroxide was investigated by Accelerating Rate Calorimeter. The curves of thermal decomposition temperature and pressure versus time for the systems were obtained. The curves of temperature rising-rate versus thermal decomposition temperature were also obtained. After the data revision disposal and analysis processing, thermal decomposition parameters and kinetic data of benzoyl peroxide were calculated, respectively.     

A novel capillary microliter droplet sample injection-chemiluminescence detector and its application to the determination of benzoyl peroxide in wheat flour

A novel capillary microliter order droplet injection-chemiluminescence (CL) system is proposed. In this system, the liquid sample microdrops, automatically formed at the end of a capillary tip by the effect of the gravity and the gas pressure, repeatedly drop into the miniature reaction cell and reacts with CL reagent to generate CL signal. The phenomena of sample zone dilution and spreading are eliminated as the capillary is used as the sample channel and gas pressure is used as driving force without the liquid carrier stream. Therefore, a high sensitivity is obtained. To evaluate the applicability of the proposed method, a determination of benzoyl peroxide (BP) is examined. The system shows that the benzoyl peroxide is detected linearly in the concentration range from 5×10⁻¹⁰ to 1×10⁻⁶ g ml⁻¹. The detection limit (signal-to-noise ratio=3) is 1.4×10⁻¹⁰ g ml⁻¹ for benzoyl peroxide (mass concentration is 1.1 pg, i.e., 4.5 fmol), which is the best result reported so far. The relative standard deviation (n=11) is 1.5% for 2.0×10⁻⁸ g ml⁻¹ BP. The proposed detector for the detection of benzoyl peroxide offers the advantages of sensitivity, simplicity, rapidity, automation and miniaturization. The proposed method has been applied satisfactorily to the determination of benzoyl peroxide in wheat flour.     

Thermal decomposition of p-methyl-p'-nitrobenzoyl and bis-p-nitrobenzoyl peroxides

Differential enthalpic analysis was carried out below the melting point as well as at regular increases of temperature over the melting point of peroxides. From these measurements it follows that the thermal stabilities of peroxides in the solid state increase with their melting points. The rise in the melting point of the peroxide due to changed chemical structure is accompanied by a rise in the melting points of products which in turn affects the isothermal autocatalytic decomposition. The common feature of the thermal decomposition of the peroxides studied below their melting points is a very high apparent activation energy of the initiation of a chain decomposition reaction which is several times higher than that of a spontaneous thermal decomposition of peroxide in solution or in a melt of peroxide. p]From the study of the decomposition of nitro derivatives of benzoyl peroxide in solution it is known¹ that the electron attracting nitro-substituents have a retarding effect on the spontaneous decomposition of peroxides. The introduction which accompanies its thermal decomposition in solution². However not only the substitution of nitro groups in the molecule but also the presence of nitro compounds accelerates the decomposition of benzoyl peroxide³. This indicates that the decomposition reaction may be influenced not only by an intramolecular rearrangement of electrons but also by an intermolecular interaction of nitro compounds with the peroxidic compounds or radicals generated by them. The substitution of methyl groups for hydrogen in aromatic rings does not produce any marked changes in the decomposition reactions of benzoyl peroxide². p]Among other changes produced by substitution, the physical changes—in particular, the changes in the melting points of investigated substances—are of importance to out study of the thermal decomposition of nitro derivatives of nitro derivatives of benzoyl peroxide. These data are interesting mainly because the decomposition of peroxides is influenced by the state of aggregation of the decomposing substances.     

Ferrocenyl-containing iron(ii) clathrochelate-benzoyl peroxide, a new initiating system for radical polymerization of methyl methacrylate

Radical polymerization of methyl methacrylate initiated by the benzoyl peroxide — macrobicyclic bis-ferrocenylboron-capped iron(ii) tris-1,2-cyclohexanedione dioximate system was studied. The ferrocenyl-containing macrobicyclic complex and benzoyl peroxide forms an efficient initiating system that allows one to perform the polymerization process at a high rate with substantially reduced amounts of the initiator and the metal complex component at 30–75 °C and to influence the molecular-weight characteristics of poly(methyl methacrylate) produced.