新型聚酰胺酰亚胺的合成及其热稳定性

L-丙氨酸与均苯四甲酸二酐经缩合反应制得手性酰亚胺(1);1与二苯基甲烷二异氰酸酯聚合制得新型的以L-丙氨酸为手性源的聚酰胺酰亚胺(2),其结构经1H NMR和FT-IR表征.用DSC和TGA研究了2的结晶性能和热稳定性,同时对2的溶解性能进行了探讨.结果表明,2的Tm为357.6℃,失重5％的分解温度为215℃;2在常温下溶于DMF,DMAc,DMSO和NMP.     

Note New Organic Polymers. 5. Synthesis of Poly(2-Vinyl-3-Substituted-4-Quinazolone)s

Heterocyclic polymers are well known for their outstanding thermal stability [I]. Sillion et al. [2, 31 reported that polyquinazolones prepared from 6,6′-bi(3,1-benzoxazin-4-one) substituted in the 2-position by a methyl or phenyl group and aromatic diamines are soluble in m-cresol and possess good thermal stability. The present paper deals with the synthesis of polyquinazolones from poly [l-(2-carboxyanilinocarbonyl)ethylene]. See Figs. 1 and 2.     

苯并双噁唑类聚合物的合成

详细介绍了以4,6-二氨基间苯二酚盐酸盐(DADHB)为原料,采用多聚磷酸法、三甲基硅烷基化法、中间相聚合法、单体成盐法合成聚对苯撑苯并双噁唑(PBO),还有以4,6-二硝基间苯二酚(DNR)为原料,先选择还原制得4-氨基-6-硝基间苯二酚盐酸盐,进而与对甲氧羰基苯甲酰氯进行缩环合获得苯并噁唑化合物,再催化加氢合成AB型PBO新单体2-(对甲氧羰基苯基)-5-氨基-6-羟基苯并噁唑,最后自缩聚反应制备PBO的新路线.另外,本文还介绍了直链烯烃型、直链脂肪烷烃型、稠环芳烃型、联苯取代基型、杂环型、聚醚型等苯并双噁唑类聚合物的合成方法.     

Heterocyclic Poly(Bismaleimide)s. II. Synthesis and Characterization of New Poly(Ether-Bismaleimide)s Containing Parabanic Rings

Abstract

New poly(ether-bismaleimide)s containing parabanic rings were obtained by the nucleophilic substitution reactions of 1,3-bis(4-dichloromaleimido-phenyl)parabanic acid (4) with various bisphenols. The structures of the resulting polymers were confirmed by IR and elemental analysis. The polymers are soluble in aprotic dipolar solvents and showed lower thermal stability than other polymers without parabanic rings.     

Synthesis and Characterization of Poly(Aryl Ether-Bissulfone)s

A series of poly(aryl ether-bissulfone)s were synthesized from bis-phenols, 4,4′-bis(4-chlorophenylsulfonyl)biphenyl, and 4,4′-bis(4-fluorophenylsulfonyl)biphenyl. The bishalide monomers were synthesized by reaction of 4,4′-bis(chlorosulfonyl)biphenyl with a suitable aryl halide. Potassium carbonate mediated reaction in di-methylacetamide gave high molecular weight polymers in excellent yield. The polymers are soluble in dipolar aprotic solvents. Unlike the corresponding monosulfone analogues, the poly(aryl ether-bissulfone)s exhibited poor solubility in chlorinated hydrocarbons. The glass transition temperatures of the polymers are among the highest known for poly(aryl ether)s (241-271 °C). In addition, the polymers exhibit excellent thermal stability and they produce clear, colorless tough films by solution casting or compression molding.     

Poly(difluorophosphazene): A New Intermediate for the Synthesis of Poly(organophosphazenes)

Although many poly(organophosphazenes) have been synthesized, new preparative pathways are needed, especially for polymers that contain alkyl side groups. A new development involves the use of poly(difluorophosphazene), (NPC1₂) instead of poly-(dichlorophosphazene), (NPC1²)_n, as a substrate for reactions with organometallic reagents. This approach has allowed the preparation of a new class of poly(organophosphazenes) that possess substituent groups linked to the skeleton through direct phosphorus-carbon bonds. The synthesis of uncrosslinked poly-(difluorophosphazene) and its reactions with alkoxides and amines are also reviewed.     

含4-叔丁基环己基和烯烃共轭结构的双苯并噻唑类聚合物的合成及性能

一类新型的含4-叔丁基环己基和烯烃共轭结构的双苯并噻唑类聚合物PBTs III1,2由1,1’-双(4-氨基-3-巯基苯基)-4-叔丁基环己烷二盐酸盐(BAMPBCH?2HCl)与烯烃二元酸经过缩聚反应制备得到。聚合物的结构都经过了红外(IR)、核磁(NMR)、元素分析(EA)的表征。4-叔丁基环己基的引入提高了此类聚合物的溶解性并保持了较好的热稳定性,失重10%的温度在419 oC以上。相比聚苯撑苯并双噻唑(PBZT),PBTs III1,2的紫外吸收波长发生了蓝移,相对聚2,2’-对苯撑-6,6’-(4-叔丁基)环己基双苯并噻唑(PBT)则发生了红移,光学能带隙分别为2.56eV和2.53eV,大侧基和烯烃结构的引入扩大了苯并噻唑类聚合物光学能带隙的可调范围。PBTs III1,2的荧光发射波长较PBT发生了红移,大侧基的引入降低了固态时聚合物分子链的聚集程度。顺磁共振(EPR)的结果表明,PBTs III1,2都有明显的顺磁共振信号,顺磁中心是它们本身所固有的。     

3种新型聚苯基醚喹噁啉的合成

用4,4′-二氟代二苯甲酰与双酚A的溶液缩聚制得聚醚苯偶酰(PEB),经邻苯二胺改性后,通过两步法得到聚苯基醚喹噁啉（PEQ-1）。 在PEB的改性反应中加入质量分数分别为1.0%和1.3%的3,3′,4,4′-四胺基二苯醚,可有效增加聚苯基醚喹噁啉的相对分子质量,得到PEQ-2和PEQ-3（总收率≥90%）,其质均相对分子质量分别为7.492×104和1.486×105。 并用IR、 NMR等对这些聚合物进行了表征。 该法操作简便,具有潜在的应用价值。     

Synthesis of Methyl—substituted Phthalazinone—based Aromatic Poly（amide imide）s

A series of novel aromatic poly (amide imide)s containing phthalazinone moietics were prepared from 2-(4-aminophenyl)-4-[3-methyl-4-(4-aminophenoxy)-2,3-phthalazinone-1], a novel diamine 1 with our diimide-dicarboxylic acids by Yamazaki phosphorylation method with the inherent viscosity of 0.36-0.65 dL/g. These polymers had high glass transition temperatures above 300℃ and they lost 10% weight between 426-475℃ in N2. The structure of diamine 1 and the polymers was confirmed by IR,^1H NMR and MS. The obtained polymers were readily soluble in polar solvents such as NMP,m-cresol etc. and easily cast into tough,flexible films. The X-ray indicated that they are all amorphous.     

Synthesis and Properties of Novel Poly（amine ether）s

Using aromatic bis（4-bromophenyl） ether and various aromatic diamines as the monomers, a series of novel poly（amine ether）s （PAEs） have been synthesized via palladium-catalyzed aryl amination, which is the Hartwig-Buchwald polycondensation reaction. Their structures were characterized by means of elemental analysis, FT-IR, 1^H NMR and UV-Vis spectroscopy. The results show a good agreement with the proposed structures. Their general properties were studied by DSC and TG and it＇s obvious that they show high glass transition temperatures （Tg〉200 ℃）, good thermal stability with high decomposition temperatures （TD〉500℃） and excellent solubility. The mechanical behavior of these polymers suggested that they could be considered a new class of high-performance polymers.     

高Tg含萘聚芳醚酮的合成与性能

利用Friedel-Craft和去醚化反应成功地制备了具有对称取代结构的含萘双酚单体1,5-二(3-甲基)苯羰基-2,6-二羟基萘, 并且通过高温亲核取代反应制得了两种高分子量的芳香族聚合物, 对这两种新型聚合物的热性能、溶解性能、机械性能及介电常数等进行了表征.     

New ferrocene-containing structures: Poly(silyl ester)s

Two new polymeric structures containing ferrocene units along the chains, namely poly(silyl ester)s, have been synthesized and characterized: a geminal poly(silyl ester) (g-PSE) and one having a disiloxane spacer between the silyl ester groups (s-PSE). The condensation polymerization of AA/BB monomer systems in solution was used in both cases as preparation method involving a silicon-containing diol, (diphenylsilane diol or 1,3-bis(hydroxy)-tetramethyldisiloxane), and 1,1′-di(chlorocarbonyl)ferrocene. The polymers were investigated by differential pulse voltammetry in order to evaluate the redox behavior. Due to the presence of the silyl ester groups in the chain, these polymers are hydrolytically degradable.     

Poly(cyclodiborazane)s

This paper summarizes our recent works on the synthesis and properties of the organoboron polymers, especially poly(cyclodiborazane)s. The polymers consist of boron–nitrogen four-membered rings, and are highly stable against air and moisture. The obtained polymers exhibited interesting properties as a novel type of π-conjugated polymers with intramolecular charge transfer structure. Their stability and potential as functional materials would be important and informative both in industry and boron chemistry.     

Poly(thioester)s

Syntheses and properties of aliphatic and aromatic polythioesters (PTEs) were reviewed including polythiocarbonates and polythiourethanes. The content is subdivided into the following sections: PTEs of aliphatic α‐mercapto carboxylic acid, PTEs of ω‐mercapto carboxylic acids, PTEs derived from α,ω‐dimercapto alkanes, aromatic poly(thioester)s, aliphatic poly(thiocarbonate)s, aliphatic poly(thiourethane)s and aromatic polythiocarbonates. The synthetic strategies reviewed in this article include anionic and cationic ring‐opening polymerizations, polycondensations in bulk, polycondensations in solutions, interfacial polycondensations and in vitro enzymatic polycondensations.     

New Semiconducting Poly(arylene sulfide)s: Synthesis,Characterization, and Optical Properties

New semiconducting soluble poly(arylene sulfide)s were synthesized by Wittig polycondensation. The arylene moieties consist of distyrylbiphenyl (P1) and distyrylbithiophene (P2) π-conjugated systems. The polymers are fully amorphous and show good thermal stability. The absorption and photoluminescence properties of the polymers were investigated. P1 film has an optical gap of 2.95 eV and exhibits green-blue fluorescence. P2 shows a longer effective conjugation length with a gap of 2.42 eV and emits in the orange region. The HOMO/LUMO energy levels were estimated by cyclic voltammetry measurements. Single-layer diodes were fabricated and show relatively low turn-on voltages.     

Poly(diarylsilmethylene)s,I. Synthesis and characterization

Poly(diarylsilmethylene)s with phenyl or tolyl substituents on Si atoms were synthesized by ring-opening polymerization of corresponding 1,1,3,3-tetraaryl-1,3-disilacyclobutanes, and were characterized by means of DSC, x-ray diffraction and melt viscosity measurements. Three preparative routes including catalytic and noncatalytic polymerization methods were examined to see differences in properties of the resulting polymers. The polymers thus obtained were crystalline and soluble in limited solvents such as diphenyl sulfone at tem-peratures above 250°C. Poly(diphenylsilmethylene) exhibited a melting temperature of about 350°C, whereas those of polymers with tolyl groups were observed in a temperature range between 310 and 330°C. The melt viscosity of the poly(diarylsilmethylene)s was measured to obtain insight into the molecular weights of the polymers, and the results indicated that the molecular weights are modifiable by varying the monomer-to-catalyst ratio when solution polymerization is employed. The DSC and x-ray studies were also carried out with focusing on the melting and crystallization behavior of these polymers. © 1995 John Wiley & Sons, Inc.     

Synthesis and Characterization of New Functional Poly(ester-anhydride)s Based on Succinic and Sebacic Acids

Summary: New functional poly(ester-anhydride)s with allyl pendant groups in the side chains were obtained by polycondensation of sebacic acid (SBA) and poly(3-allyloxy-1,2-propylene succinate) (OSAGE) terminated with carboxyl groups. The carboxyl groups in OSAGE and in SBA were converted to mixed anhydride groups by acetylation with acetic anhydride. After that, prepolymers obtained were condensed in vacuum to yield higher molecular weight poly(ester-anhydride)s. The influence of SBA and OSAGE content in poly(ester-anhydride)s on their selected properties e.g. molecular weight, thermal and solubility characteristics as well as degradation rate and mode, were examined. Poly(ester-anhydride)s were degraded in aqueous buffer of pH 7.4 at 37 °C. The hydrolytic degradation was monitored by determination of weight loss of samples and by determination of ester to anhydride groups ratio.     

三元共聚物聚甲基乙撑-环己撑碳酸酯的合成与表征

报道了三元共聚物聚甲基乙撑-环己撑碳酸酯的制备与性能研究. 实验采用高活性的负载戊二酸锌作为催化剂, 在不添加任何溶剂的情况下, 以二氧化碳和环氧丙烷、环氧环己烷为原料, 制备了不同环己撑碳酸酯含量的三元共聚物, 并对其结构和热性能、力学性能进行了表征和分析. 结果表明这些三元共聚物具有较高的分子量, 且玻璃化转变温度随着主链上的环己撑碳酸酯含量增加而逐渐升高. 同时三元共聚物表现出比二元共聚物更好的力学性能.