Synthetic Bilayer Membranes: Molecular Design,Self-Organization,and Application

Lipid bilayers are a most central building block of the biological molecular organization. Their two-dimensional self-assembly is essential to the generation of biological shapes and sizes on the molecular level. The observation that a totally synthetic amphiphile in water is spontaneously assembled to a bilayer structure suggested that bilayer formation is a general physicochemical phenomenon that is not restricted to particular structures of biolipid molecules. Bilayer formation is now observed for a large variety of synthetic amphiphiles which contain one, two, three, or four alkyl tails. The flexible alkyl tail may be replaced by perfluoroalkyl chains. The supramolecular structures obtained therefrom can be related to the component's molecular structure in many cases. The structural variety and the ease of molecular design make the synthetic bilayer an attractive vehicle for organizing covalently bound functional units and guest molecules. In addition, stable monolayers on water, planar lipid membranes (BLM), and free-standing cast films are obtainable because of the self-assembling property of bilayer-forming compounds. These molecular organizations display common supramolecular features. The use of the cast film as a molecular template provides exciting potential for the production of novel two-dimensional materials.     

Spacer-dependent structural and physicochemical diversity in copper(II) complexes with salicyloyl hydrazones: a monomer and soluble polymers

Complexation of copper(II) with a series of heterodonor chelating Schiff bases (LL) of salicylic acid hydrazide and aliphatic or cycloaliphatic ketones affords soluble one-dimensional (1D) metallopolymers containing Schiff bases as bridging ligands. Single-crystal X-ray diffraction results reveal nanometer-sized metallopolymeric wires [Cu(μ-LL)(2)](n) with off-axis linkers and a zigzag geometry. Octahedrally coordinated copper centers, exhibiting a Jahn-Teller distortion, are doubly bridged by two Schiff-base molecules in the μ(2)-η(1),η(2) coordination mode. The use of dibutylketone with long alkyl chains as a component for Schiff base formation leads to a distorted square planar monomeric copper(II) complex [Cu(LL)(2)], as evidenced by its X-ray crystal structure. The compounds are characterized by elemental analyses and IR and UV-vis spectroscopy, as well as magnetic susceptibility and cyclic voltammetry measurements. Electrochemical studies on the complexes reveal an existence of polymeric and monomeric forms in solution and the dependence of Cu(II)/Cu(I) reduction potentials on alkyl groups of salicyloyl hydrazone ligands. Polymeric complexes form conducting films on Pt electrodes upon multicycle potential sweeps.     

Electron transfer through clay monolayer films fabricated by the Langmuir-Blodgett technique

Hybrid films composed of amphiphilic molecules and clay particles were constructed by the modified Langmuir-Blodgett (LB) method. Clays used were sodium montmorillonite (denoted as mont) and synthetic smectite containing Co(II) ions in the octahedral sites (denoted as Co). Two kinds of amphiphilic molecules were used-[Ru(dC(18)bpy)(phen)2](ClO4)2 (dC(18)bpy = 4,4'-dioctadecyl-2,2'-bipyridyl and phen = 1,10-phenanthroline) (denoted as Ru) and octadecylammonium choloride (ODAH+Cl- or denoted as ODAH). Three kinds of hybrid films (denoted as Ru-mont, Ru-Co, and ODAH-Co films) were prepared by spreading an amphiphilic molecule onto an aqueous suspension of a clay. Atomic force microscopy (AFM) analyses of the films deposited on silicon wafers indicated that closely packed films were obtained at 20 ppm for all the above three cases. Cyclic voltammetry (CV) was measured on an ITO electrode modified with a hybrid film or a monolayer film of pure Ru(II) complex salt (denoted as Ru film). The Ru(II) complexes incorporated in the Ru-mont film lost their redox activity, indicating that montmorillonite layers acted as a barrier against electron transfer. In contrast, the same complexes in the Ru-Co film were electrochemically active with the simultaneous appearance of the redox peaks due to the Co(II)/Co(III) (or Co(II)/Co(IV)) couple. The results implied that electron transfer through cobalt clay layers was possible via mediation by Co(II) ions in a clay sheet. For an aqueous solution containing nitrite ions (NO2-) at pH 3.0, a large catalytic oxidation current was observed for both the electrodes modified with the Ru-mont and Ru-Co films. The results were interpreted in terms of the mechanisms that the charge separation of an incorporated Ru(II) complex took place to produce a pair of a Ru(III) complex and an electron and that the generated Ru(III) complex was reduced by a nitrite ion before it recombined with the electron.     

NO2 gas detection by Langmuir-Blodgett films of copper phthalocyanine multilayer structures

Copper (II) phthalocyanine derivatives with four alkyl chains were synthesized. Langmuir-Blodgett (LB) films of the following two compounds were deposited: Cu(II)[tetrakis(3,3-dimethyl-butoxycarbonyl)] phthalocyanine and Cu(II)[tetrakis(n-butoxycarbonyl)] phthalocyanine. Moreover, LB films from a 1:1 mixture of the two compounds were prepared. All isotherms and optical data were consistent with the molecules being stacked nearly edge-on to the substrate, with the molecular faces having a preferred orientation perpendicular to the dipping direction. The dynamic response characteristics of the electrical conductance of the LB films to different NO₂ concentrations in dry air are described. A relationship has been observed between the anisotropic molecular orientation and the electrical conductivity parallel to the substrate.     

Effect of acidity on the formation of solvent-free lipid bilayers

Glasses with hydrophobized surface are used to form “dry” bilayer lipid membranes (BLM). The contact angle on the silaned glass plates reaches 125°. Partitions of this kind, as opposed to polymer films, make a system more resistant to heat oscillations and mechanical perturbations generated when studying membranes properties. The specific capacitance of BLM (0.86 ± 0.04 μF cm^?2) testifies to the solvent absence in the bilayer. The dramatic drop of the capacitance (area) of the dry membranes with increasing pH is caused by a greater adsorption of lipid molecules on the hydrophobic substrate, which is probably due to changing conformation of their polar “head.”     

Fine-tuning of properties of bismacrocyclic dinuclear cyclidene receptors by N-methylation

N-Methylated bismacrocyclic Cu and Ni complexes were synthesised and structurally characterised in the solid state. Their properties in solution were analysed by using NMR and ESR spectroscopies and electrochemical methods. Face-to-face biscyclidenes linked through polymethylene chains form rectangular boxlike cations. These moieties can host some small guest molecules (water, pi-electron donating compounds) and are stabilised by a shell of neighbouring counterions. For the bismacrocyclic dinuclear complexes containing two nickel or two copper ions, the intramolecular interactions between the metallic centres are strengthened through methylation of the macrocyclic components, as compared with the nonmethylated species. We report the electron coupling created by two unpaired electrons coming from two copper centres observed by ESR spectroscopy. Methylation weakens the electron-acceptor properties of the complexes, which leads to less effective binding of the pi-electron-donating guests. It also increases the stability of the lower oxidation states. In the case of the copper complexes, both Cu(II)/Cu(I) and Cu(II)/Cu(III) reversible one-electron transfers are seen in the voltammograms. These changes in properties are interpreted as the consequences of steric repulsion between the methyl substituents and the macrocyclic ring.     

Self-assembled bilayers from the protein HFBII hydrophobin: nature of the adhesion energy

The hydrophobins are a class of amphiphilic proteins which spontaneously adsorb at the air/water interface and form elastic membranes of high mechanical strength as compared to other proteins. The mechanism of hydrophobin adhesion is of interest for fungal biology and for various applications in electronics, medicine, and food industry. We established that the drainage of free foam films formed from HFBII hydrophobin solutions ends with the appearance of a 6 nm thick film, which consists of two layers of protein molecules, that is, it is a self-assembled bilayer (S-bilayer), with hydrophilic domains pointing inward and hydrophobic domains pointing outward. Its formation is accompanied by a considerable energy gain, which is much greater than that typically observed with free liquid films. The experiments at different pH show that this attraction between the "hydrophilic" parts of the HFBII molecules is dominated by the short-range hydrophobic interaction rather than by the patch-charge electrostatic attraction.     

Synthesis, redox, and amphiphilic properties of responsive salycilaldimine-copper(II) soft materials

Hydrolysis of the asymmetric pyridine- and phenol-containing ligand HL (1) (2-hydroxy-4-6-di- tert-butylbenzyl-2-pyridylmethyl)imine) led to the use of bis-(3,5-di -tert-butyl-2-phenolato-benzaldehyde)copper(II), [Cu (II)(L (SAL)) 2] ( 1) as a precursor for bis-(2,4-di- tert-butyl-6-octadecyliminomethyl-phenolato)copper(II), [Cu (II)(L (2)) 2] ( 3), bis-(2,4-di- tert-butyl-6-octadecyl aminomethyl-phenolato)copper(II), [Cu (II)(L (2A)) 2] ( 3'), and bis-(2,4-di- tert-butyl-6-[(3,4,5-tris-dodecyloxy-phenylimino)-methyl]-phenolato)copper(II), [Cu (II)(L (3)) 2] ( 4). These complexes exhibit hydrophilic copper-containing head groups, hydrophobic alkyl and alkoxo tails, and present potential as precursors for redox-responsive Langmuir-Blodgett films. All systems were characterized by means of elemental, spectrometric, spectroscopic, and electrochemical techniques, and their amphiphilic properties were probed by means of compression isotherms and Brewster angle microscopy. Good redox activity was observed for 3 with two phenoxyl radical processes between 0.5 and 0.8 V vs Fc (+)/Fc, but this complex lacks amphiphilic behavior. To attain good balance between redox response and amphiphilicity, increased core flexibility in 3' and incorporation of alkoxy chains in 4 were attempted. Film formation with collapse at 14 mN.m (-1) was observed for the alkoxy-derivative but redox-response was seriously compromised. Core flexibility improved Langmuir film formation with a higher formal collapse and showed excellent cyclability of the ligand-based processes.     

Encapsulation of tris(4,7-diphenyl-1,10-phenanthroline)ruthenium(II) complex linked with dendrons in sol-gels: Stable optical sensing membranes for dissolved oxygen

To circumvent the leaching problem of optical sensing membranes used for dissolved oxygen (DO) measurements, the encapsulation of Ru(II) complexes linked with bulky dendron(s) in a sol-gel matrix was investigated. A dendron, readily formed via chemical transformations such as amidation and catalytic reduction, was covalently incorporated into tris(4,7-diphenyl-1,10-phenanthroline)ruthenium(II) complex, leading to an increase in the size and lipophilicity of dye molecules. Sol-gel-based sensing membranes encapsulating these Ru(II) complexes displayed a strong luminescence emission at 590 nm induced by radiation at 480 nm, and showed excellent DO sensing properties and stability for repeated measurements in aqueous solution. The encapsulation of the dendron-incorporated Ru(II) complexes in sol-gels prevented the dyes from leaching out of the membranes.     

Poorly water-soluble drug nanoparticles via an emulsion-freeze-drying approach

In this paper, we examine, by dissipative particle dynamics (DPD) simulation, the interactions between nanoparticles and block copolymer bilayer membranes. The bilayer has a hydrophobic core and hydrophilic head groups on both sides of the core. Nanoparticles without or with a grafted homopolymer are considered. For the conditions investigated, the single nanoparticles and small aggregates are located at the interfaces of the membrane, namely the interfaces between the hydrophilic domains of the membrane and the solvent as well as at the interface between the hydrophobic and hydrophilic domains of the membrane. The large aggregates are located in the hydrophilic domains. By increasing the length of the homopolymer grafted on the nanoparticles, the size of the aggregates in the membrane decreases. At relatively short DPD step times, the particles aggregate in the solvent. As the time increases, the single particles and aggregates penetrate into the membrane.     

Cu(bpy)22+—Nafion聚合物膜修饰电极研究

在目前的聚合物膜修饰电极领域中引起人们极大的研究兴趣,这是因为用离子交换方法可将许多电化学或电催化活性的阳离子物种固定于Nafion膜中,构成具有离子导电功能和特定电化学性质的膜合物膜修饰电极。     

Supramolecular Assembly and Headgroup Effect in Interfacial Organized Films (I): A Study of Some Bolaamphiphiles

Two bola form Schiff bases derivatives with different substituted head groups have been designed and their interfacial phase behaviors and coordination with Cu(II) ions were investigated. It has been found that while one molecule with benzene headgroup formed dotted aggregations at the air/water interface, another with naphthyl moiety as head group formed crystalline multilayer films on water surface. When on the sub phase containing Cu(II) ions, both of the Schiff bases can coordinate with Cu(II) in situ in the spreading films with the obvious conformational change of alkyl chains. The in situ Cu(II)-coordinated films could be transferred onto solid substrates and subsequently characterized by various spectroscopic methods such as UV-vis and Fourier transform infrared spectra as well as the morphological character with atomic force microscopy measurement. In comparison, the ex situ coordination process at the liquid/solid interface have also been investigated by continuous spectral measurement. Depending on the different head groups, these amphiphiles showed different aggregation behaviors in the Langmuir-Blodgett films. Particularly, during the coordination process of ligand with Cu(II) ions in organized molecular films, great conformational change of the alkyl chains was observed. At the same time, a rational explanation about the head group effect on regulating the aggregation behaviors was discussed.     

Exceptional affinity of nanostructured organic-inorganic hybrid materials towards dioxygen: confinement effect of copper complexes

We report the exceptional reactivity towards dioxygen of a nanostructured organic-inorganic hybrid material due to the confinement of copper cyclam within a silica matrix. The key step is the metalation reaction of the ligand, which can occur before or after xerogel formation through the sol-gel process. The incorporation of a Cu(II) center into the material after xerogel formation leads to a bridged Cu(I)/Cu(II) mixed-valence dinuclear species. This complex exhibits a very high affinity towards dioxygen, attributable to auto-organization of the active species in the solid. The remarkable properties of these copper complexes in the silica matrix demonstrate a high cooperative effect for O(2) adsorption; this is induced by close confinement of the two copper ions leading to end-on mu-eta(1):eta(1)-peroxodicopper(II) complexes. The anisotropic packing of the tetraazamacrocycle in a lamellar structure induces an exceptional reactivity of these copper complexes. We show for the first time that the organic-inorganic environment of copper complexes in a silica matrix fully model the protecting role of protein in metalloenzymes. For the first time an oxygenated dicopper(II) complex can be isolated in a stable form at room temperature, and the reduced Cu(2) (I,I) species can be regenerated after several adsorption-desorption cycles. These data also demonstrate that the coordination scheme and reactivity of the copper cyclams within the solid are quite different from that observed in solution.     

Synthesis of ultrathin polymer films by self assembly

Recent progresses in the self assembly of ultrathin polymer films are described. Bilayer membranes of polymeric hydrogen-bond networks are formed in water. Two-dimensional networks of organic and inorganic polymers are formed in cast films of synthetic bilayer membranes to give stable multilayer films upon removal of the matrices. The monolayer at the air-water interface constitutes suitable templates for 2D polymer networks, and it may be either removed or part of the 2D film. Successive adsorption of polycations and polyanions under carefully controlled conditions produces layered polyion complexes in the stepwise manner. Various polymer chains are epitaxially adsorbed onto graphite. All these results indicate that molecularly defined 2D polymer structures are readily available.     

Self‐Assembled Aggregates and Molecular Bilayer Films of a Double‐Chain Fullerene Lipid: Structure and Electrochemistry

The self‐aggregation behavior of C₆₀ fullerenes that bear two octadecyl chains (lipid 1 ) as well as the structures and electrochemical properties of cast films of 1 are described. We also examined the self‐aggregation behavior in organic solvents of three previously reported compounds: C₆₀ with three each of hexadecyl (lipid 2 ), tetradecyl (lipid 3 ), or dodecyl (lipid 4 ) chains. The fullerene lipids in alcohols spontaneously formed spherical aggregates, whose diameters are related to the alkyl‐chain lengths, concentrations of the fullerene lipids, and the solvent polarity. The morphologies of the aggregates showed temperature dependence. Cast films of 1 formed multimolecular bilayer structures that undergo a phase transition typical of lipid bilayer membranes. The electrochemistry of cast films of 1 on an electrode in aqueous medium exhibits temperature dependence.     

Incorporation of Na(+),K(+)-ATP-ase into the thiolipid biomimetic assemblies via the fusion of proteoliposomes

The black lipid membranes (BLMs) are artificial membrane systems that have been widely used in the study of different biological processes. In this paper the planar bilayer lipid membranes have been used to study the behavior of thiolipid molecules-dipalmitoyl-phosphatidyl-ethanolamine-mercaptopropionamide (DPPE-MPA) and cholesteryl 3-mercaptopropionate (Chs-MPA)-as compared to classical BLM made of natural lipids. We present our experiments on black thiolipid bilayer (BTM) formation from a thiolipid solution and basic results of pump currents generated by sodium-potassium pump-Na(+),K(+)-ATP-ase-introduced to such bilayer systems via proteoliposome adsorption with subsequent fusion. Our results imply that no substantial difference exists between BLMs formed from classical lipids and those made from thiolipids used in this study. The same thiolipid molecules were subsequently used for the formation of covalently bound, tethered bilayer lipid membranes (t-BLMs) on polycrystalline gold electrodes. Similarly, as in the case of BLMs, we took advantage of proteoliposome adsorption/fusion to obtain a t-BLM system with reconstituted enzyme. The vesicle fusion on hydrophobic or hydrophilic substrates is one of the main ways to obtain a bilayer system with incorporated biological species. In this paper we present also our preliminary results of electrochemical experiments using rapid solution exchange technique on such t-BLMs systems and their comparison with painted solid supported membranes (SSMs) and BLMs. We have also followed the process of vesicles fusion onto thiolipid monolayer by means of in situ atomic force microscopy in tapping mode (TM-AFM). On the basis of these experiments, we conclude that DPPE-MPA and Chs-MPA molecules used in our experiments preserve lipid properties, allowing for at least partial reconstitution of Na(+),K(+)-ATP-ase into such t-BLMs. On the other hand, the relatively compact organization on polycrystalline gold and the hydrophobic nature of the first monolayer of tethered thiolipids slows down the proteoliposome fusion onto such monolayers and consequently hinders the protein insertion. However, this effect can be overcome by mechanical stimulus that facilitates proteoliposome delamination onto the self-assembled monolayer.     

Neutron reflectivity study of lipid membranes assembled on ordered nanocomposite and nanoporous silica thin films

Single bilayer membranes of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) were formed on ordered nanocomposite and nanoporous silica thin films by fusion of small unilamellar vesicles. The structure of these membranes was investigated using neutron reflectivity. The underlying thin films were formed by evaporation induced self-assembly to obtain periodic arrangements of silica and surfactant molecules in the nanocomposite thin films, followed by photocalcination to oxidatively remove the organics and render the films nanoporous. We show that this platform affords homogeneous and continuous bilayer membranes that have promising applications as model membranes and sensors.     

Novel oxygen sensitive complexes for optical oxygen sensing

Novel optical sensing films for oxygen based on highly luminescent iridium (III) and ruthenium (II) complexes have been developed. These demonstrate excellent long-term photostability (several months) when incorporated into polystyrene membranes. The influence of different plasticizers on the specific luminescence quantum yield, the Stern-Volmer constant, the reversibility and the response time were evaluated. Additionally the sensing films can be sterilized by chemical cleaning and gamma-ray irradiation.     

Isomer‐dependent properties of poly(vinyl pyridine)‐based films grown on copper surfaces

The effect of poly(2‐vinyl pyridine) (P2VP) and poly(4‐vinyl pyridine) (P4VP) isomers on the growth of surface films on copper substrates was studied by electrochemical, spectroscopic, thermogravimentric, and microscopic methods. In acid environment (3% v/v acetic acid) and in the presence of KSCN, electrochemically generated copper cations reacted rapidly with SCN^? and P2VP or P4VP, yielding coordination compounds, which deposited onto copper surfaces as films. The characteristics of such polymer–metal complexes (films) were markedly isomer‐dependent. Cu(I)/P2VP/SCN^? complexes with monovalent cations and sulfur‐coordinated thiocyanate were obtained in the presence of P2VP, whereas the formation of Cu(II)/P4VP/SCN^? complexes with divalent cations and nitrogen‐coordinated thiocyanate was observed in the presence of P4VP. Interestingly, similar physical–chemical properties (electronic structure, stoichiometry, and thermal behavior) were observed for materials synthesized by electrochemical and chemical methods. These results suggest, therefore, that control over the surface properties of copper substrates can be achieved using electrosynthesized films based on different PVP isomers. Besides acting as effective protective barriers against aggressive media and thus reducing the metal dissolution (corrosion) kinetics, these materials are potentially attractive for other applications in which surface properties are paramount, such as in catalysis. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 215–225, 2009     

Proton transport into a tethered bilayer lipid membrane

Tethered bilayer lipid membranes (tBLMs) are increasingly used to study biological membranes, membrane proteins and a variety of related topics. A tBLM is formed by binding a lipid bilayer to a metal surface (usually gold) via a hydrophilic tether (usually an ethyleneoxy chain). In this report we present an electrochemical study on ubiquinone in a tBLM which has provided insights into the properties of this hydrophilic layer, which has a very limited capability of storing and releasing protons. It is concluded that the often observed decrease in tBLM resistance upon addition of ionophores (or protonophores) could be due to the penetration of ions (or protons) into the membrane rather than transport through the membrane.