Grafting of Vinyl Monomers onto Poly(Acryloyl-L-valine) Microspheres Containing Peroxyester Groups

Abstract

Poly(acryloyl-L-valine) microspheres containing peroxyester groups were prepared by copolymerization of acryloyl-L-valine with di-t-butyl peroxyfumarate in acetophenone. Graft copolymerization of some vinyl monomers onto the microspheres was carried out by photolysis or thermolysis of the peroxyester groups in the microspheres. When benzyl methacrylate (BzMA) was used as the second monomer, BzMA conversion and grafting efficiency were found to increase with time. This might be ascribed to long lifetime of the polymer radicals in the microspheres. In fact, the very stable propagating radical of BzMA was observed by ESR in the photoinduced graft copolymerization system of the microspheres and BzMA at room temperature. The copolymerization process was investigated by ESR.     

Graft Copolymerization of Methyl Methacrylate onto Poly(Ethylene Terephthalate) Fibers Using Benzoyl Peroxide

Abstract

The graft copolymerization of methyl methacrylate onto poly(ethylene terephthalate) fibers has been studied using benzoyl peroxide as initiator. The grafting reactions were carried out within the 70 to 90°C temperature range, and the variations of graft yield with monomer and initiator concentrations were also investigated. The overall activation energy for grafting was calculated as 34.1 kcal/mol. The results of dyeability with the disperse dye suggested that diffusion into the fiber structure was moderately difficult when the graft yield reached 14?15%. The maximum graft yield was obtained at a benzoyl peroxide concentration of 4.00 × 10^?3 M. The decomposition temperature values obtained from thermogravimetric analysis show that the thermal stability of poly(ethylene terephthalate) fibers decreased as a result of grafting. Further, such change in the properties of methyl methacrylate grafted fibers as density, diameter, and moisture regain were also determined.     

Graft Copolymerization of Methyl Methacrylate onto Chitosan Initiated by Potassium Ditelluratocuprate(III)

A novel redox system, potassium ditelluratocuprate(III) (DTC)–chitosan, was employed to initiate the graft copolymerization of methyl methacrylate (MMA) onto chitosan in alkali medium. The effects of reaction variables, such as the initiator concentration, ratio of monomer to chitosan, the pH value, as well as reaction temperature and time were investigated, and the grafting conditions were optimized. Graft copolymers with both high grafting efficiency (>90%) and percentage of grafting were obtained, and the rate of polymerization is higher, which indicated that the DTC–chitosan redox system is an efficient initiator for this graft copolymerization. The structures and the thermal property of chitosan and chitosan–g–PMMA were characterized by infrared spectroscopy (IR), X‐ray diffraction and thermogravimetric analysis (TGA). A mechanism is proposed to explain the generation of radicals and the initiation. The graft copolymer was used as the compatibilizer in blends of terpolyamide and chitosan. The scanning electron microscope (SEM) photographs indicated that the graft copolymer improved the compatibility of the blend.     

Graft Copolymerization of Methyl Methacrylate on Poly(phenyl Vinyl Sulfide)

Graft copolymer of poly(phenyl vinyl sulfide) and methyl methacrylate was obtained. The isolation of graft copolymer was carried out by the fractional precipitation method. The isolated polymer was confirmed to be a graft copolymer by IR spectra and T determinations. Graft copolymerizations of poly(phenyl vinyl sulfide) with vinyl acetate, acrylonitrile, acrylamide, and acrylic acid were also carried out, but the separation of graft copolymer in these cases was difficult, and satisfactory results could not be obtained.     

Graft Copolymerization of Methyl Methacrylate onto Nylon 6 Using Thallium(III) Ions as Initiator

Abstract

Graft copolymerization of methyl methacrylate onto nylon 6 was investigated in aqueous perchloric acid medium using thallium(III) ions as initiator. The rate of grafting was evaluated by varying the concentrations of monomer, initiator, acid, and temperature. The rate of grafting was found to increase with an increase of both monomer and initiator concentrations. The graft yield was found to increase with an increase in the acid concentration up to 0.49 mL^?1, and beyond this concentration of perchloric acid the graft yield was found to decrease. It also increased with an increase of temperature. From the Arrhenius plot the overall activation energy was found to be 3.9 kcal/mol. The effects of inhibitors, various solvents, inorganic salts, and swelling agents on graft yield were studied. A suitable kinetic scheme has been proposed and a rate equation has been derived.     

Graft Copolymerization of (Dimethylamino)Ethyl Methacrylate onto Chitosan Initiated by Ceric Ammonium Nitrate

Abstract

(Dimethylamino)ethyl methacrylate (DMAEMA) was grafted onto chitosan using ceric ammonium nitrate as initiator in acetic acid solution. The effects of reaction variables on the grafting percentage and efficiency percentage were investigated, including the amounts of monomer and initiator, reaction time and reaction temperature. The grafted copolymers were confirmed by FTIR, thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The results of TGA and DSC indicated the improvement of thermal stability for chitosan‐g‐poly(PDMAEMA). Solubility test revealed the improved hydrophilicity of grafted chitosan in aqueous acetic acid solution, and its swelled behavior in mixtures of glacial acetic acid and anhydrous ethanol (the ratios of 1:1 and 1:2, v/v). The grafted copolymer possessed amphiphilic structure and exhibited properties of polymeric surfactant.     

Grafting of Poly(Methyl Methacrylate) onto Poly(Vinyl Chloride) through Benzodithioate Groups

The synthesis and the characterization of poly (methyl methacrylate) (PMMA) grafted to poly(vinyl chloride) (PVC) through benzodithioate groups are studied. Unlike results generally obtained with conventional free-radical initiators for systems involving PVC and MMA, high conversions, and grafting efficiencies are achieved with azobis-isobutyronitrile. The paper describes the synthesis of p-vinylbenzodithioate-containing PVC and the dependence of the characteristics of PVC-g-PMMA on the composition of the reaction mixture. Characterization of the graft copolymers includes UV and IR spectroscopy, GPC, and microstructure analysis by removal of PMMA side chains by aminolysis of dithioesters groups. Intrinsic viscosity, glass transition temperature, and thermal sensitivity were investigated to confirm the grafted nature of the copolymer.     

Improving the Structural Control of Graft Copolymers. Copolymerization of Poly(dimethylsiloxane) Macromonomer with Methyl Methacrylate Using RAFT Polymerization

Reversible addition‐fragmentation chain transfer was applied to the copolymerization of methyl methacrylate and a methacrylate‐terminated poly‐(dimethylsiloxane) macromonomer (PDMS‐MA). The relative reactivity of PDMS‐MA (1/r_MMA) was higher than in the conventional radical copolymerization and similar to that in the atom transfer radical copolymerization. The obtained graft copolymers had much lower polydispersities than those obtained in the conventional radical systems.     

Grafting Vinyl Monomers onto Wool Fibers: Graft Copolymerization of Methyl Methacrylate onto Wool Using Ferric Acetylacetonate Complex

The graft copolymerization of methyl methacrylate (MMA) onto native and reduced Indian Chokla wool fibers was studied in aqueous solution using an acetylacetonate complex of Fe(III). Perchloric acid was found to catalyze the reaction. The rate of grafting was investigated by varying the concentration of the monomer and the complex, the acidity of the medium, and the solvent composition of the reaction medium. The graft yield increases with increasing concentration of the initiator and with increasing temperature. An increase of monomer concentration up to 0.5634 mol/L and of the HClO4 concentration up to 0.01 mol/L increases the graft yield. Reduced and oxidized wools were found to be better substrates than untreated, esterified, cross-linked, and trinitrophenylated wools. Among the various monomers studied, MMA was found to be the most active. A suitable kinetic scheme is proposed. From the activation energy data, average molecular weight, and spectral studies, the reactivity of -SH groups, and the extent of chain transfer is ascertained.     

聚β-羟基丁酸酯接枝顺丁烯二酸酐的研究

接枝共聚反应;聚β-羟基丁酸酯接枝顺丁烯二酸酐的研究     

Grafting Vinyl Monomers onto Wool Fibers. X. Graft Copolymerization of Methyl Methacrylate onto Wool Using Acetylacetonato Complex of Manganese(lII)

The graft copolymerization of methyl methacrylate onto wool fibers was investigated in aqueous solution using the acetylacetonato complex of manganese(III). The rate of grafting was determined by varying the monomer, the complex, the temperature, the acidity of the medium, the nature of the wool, and the reaction medium. The graft yield increases with increasing monomer and complex concentrations. The graft yield also increases with increasing temperature. The grafting is considerably influenced by chemical modification of wool prior to grafting. A suitable mechanism has been proposed and a rate equation has been derived.     

Photoinduced Graft Copolymerization. V. Graft Copolymerization of Methyl Methacrylate onto Cellulose in the Presence of N-Bromosuccinimide as Initiator

Abstract

The photoinduced graft copolymerization of methyl methacrylate onto cellulose was studied using N-bromosuccinimide as the photoinitiator. The formation of graft copolymer increases with an increasing amount of cellulose. The graft copolymerization increases with increasing initiator concentration up to 1,25 × 10^?2 M and thereafter it decreases. The percentage of graft increases with increasing monomer concentration up to 46.9 × 10^?2 M and thereafter it decreases. The percentage graft-on increases with increasing temperature. The overall activation energy was computed to be 8.40 kcal/mol. The percentage graft was investigated using different water-miscible organic solvents. The graft copolymerization was also investigated using differently modified cellulose. A possible mechanism for the photo-graft copolymerization onto cellulose is suggested.     

分散聚合法制备甲基丙烯酸甲酯-苯乙烯共聚物微球

以聚乙烯吡咯烷酮(PVP)为分散剂,以偶氮二异丁腈(AIBN)为引发剂,在甲醇／水混合溶剂中,采用分散聚合法制备出微米级的甲基丙烯酸甲酯一苯乙烯共聚物微球,研究了分散介质组成、单体组成、引发剂浓度、分散剂浓度、反应温度等反应条件对聚合产物粒径及粒径分布的影响。     

Grafting Vinyl Monomers onto Cellulose. IX. Graft Copolymerization of Methyl Methacrylate onto Cellulose Using Peroxydiphosphate-Fe(ll) and Mn(ll) Redox Systems

The vacuum or inert-atmosphere condensation of diphenyl isophthalate and 2,2′,3,3′-tetraaminobiphenyl to poly-2,2′-(m-phenylene)-5,5′-bibenzimidazole has been investigated. Evidence from polymer and model compound (diphenylbibenzimidazole) spectral studies, elemental analysis, and analysis of volatile effluent indicates that the prepolymer formed at 260 to 300°C contains both benzimidazole and hydroxybenzimidazoline but is essentially free from phenoxybenzimidazole structures. A mechanism involving loss of phenol initially, followed by evolution of water to give benzimidazole structures, is established from experimental evidence. Polymerization in vacuum to 400°C gives the polybenzimidazole.     

Grafting Vinyl Monomers onto Wool Fibers. VII. Graft Copolymerization of Methyl Methacrylate onto Wool Using Peroxydiphosphate-Thiourea Redox System

Graft copolymerization of methyl methacrylate onto wool was investigated in aqueous solution using the potassium peroxy-diphosphate-thiourea redox system as the initiator. The rate of grafting was determined by varying the monomer, peroxydi-phosphate ion, temperature, and solvent. The graft yield increases with increasing peroxydiphosphate ion up to 80 × 10^?-⁴ mol/L, and with further increase of peroxydiphosphate ion the graft yield decreases. The graft yield increases with increasing monomer concentration. The percentage of grafting decreases with increasing thiourea concentration. The rate of grafting increases with an increase of temperature. The effect of acid and water-soluble solvent and certain salts on graft yield has been investigated and a suitable rate expression has been derived.     

Grafting Vinyl Monomers onto Poly(ethylene Terephthalate) (PET). IV. Graft Copolymerization of Methyl Methacrylate onto PET Fibers Using Acetyl Acetonate Complexes of Mn(III), Co(III), and Fe(III)

The graft copolymerization of methyl methacrylate onto poly-(ethylene terephthalate) using metal complexes of Mn³⁺, Co³⁺, and Fe³⁺ as initiators was studied. The rate of polymerization, R_p, increased with increasing complex concentrations.

The rate of polymerization was also studied by varying monomer concentrations. Increasing monomer concentrations, the rate of polymerization increases significantly. The graft yield increases with increasing temperature within the range 60–75°C. The graft yield is medium dependent. A suitable kinetic scheme has been pictured and rate equations have been derived.     

羟丙基甲基纤维素的接枝共聚及其在复合材料中的应用研究

在水溶液中以KMnO4／草酸／硫酸(氧化-还原引发体系)引发甲基丙烯酸甲酯在羟丙基甲基纤维素上的乳液接枝共聚。研究了引发剂组成、反应温度、反应介质的H^ 浓度等对接枝率的影响。结果表明：反应温度和引发剂组成对接枝率有显著影响。接枝纤维素经IR和DTA表征。用接枝纤维素填充聚氯烯(PVC)所得PVC复合材料的拉伸强度提高了20％。     

Graft Copolymerization of 2-Hydroxy Ethyl Methacrylate onto Chitosan with Cerium (IV) Ion. I. Synthesis and Characterization

Graft copolymerization of 2-Hydroxy ethyl methacrylate (HEMA) on to chitosan was studied using cerium (IV) as the initiator. Optimization of the grafting was worked out by varying the reaction time and monomer concentration. Under controlled conditions, up to 685% grafting with a grafting yield of 92.4% was achieved. FTIR, thermal and XRD techniques were used to confirm the formation of the grafted copolymer. Grafting caused a marginal decrease in the mechanical strength in the dry conditions and a significant decrease under wet conditions for the resultant polymer. The products showed significantly improved swelling at pH 7.4 and pH 1.98 compared to the original chitosan. Grafted polymer showed enhanced Tg and decomposition temperature. The grafting also resulted in improved hydrophilicity as is evident from the contact angle studies of the films.     

Grafting Vinyl Monomers onto Silk Fibers. XI. Graft Copolymerization of Methyl Methacrylate onto Silk Using Fe3+-Thiourea Redox System

The results of some investigations into the synthesis and characterization of a new class of oligomers and polymers, the polyselenoacetals, are described.     

DIMENSIONS OF ATACTIC POLY（α-METHYLSTYRENE） CHAINS WITH SIDE GROUPS

An improved configurational-confomational statistical method is developed and the mean-square radius of gyration for atactic poly(α-methylstyrene)(PαMS)chains is studied,in which the effect of large side groups is considered. The deduced formulas,based on the rotational isomer state theory,are used to investigate the configuration-dependent properties of the atactic polymer chain,and the statistical correlation of the unperturbed polymer chain dimension and structure parameters are calculated.For the fraction of meso dyads w_m=0.4,the dependence of the radius of gyration R_g and the intrinsic viscosity[η]on the molecule mass M are R_g=2.63×10~(-2) M~(0.50) nm and[η]=7.36×10~(-2) M~(0.497),respectively, which are in agreement with the previous experimental data for the PαMS samples.A small hump is detected in the curve of the characteristic ratio of the unperturbed mean-square radius of gyration versus the chain length for short PαMS chains.The R_g increases linearly with the temperature T,and the effects of the chain length and the tacticity on the temperature coefficient are remarkable.These are quite different from the results for PαMS chains not considering side groups or for the monosubstituted polystyrene chain.