Grafting Vinyl Monomers onto Nylon 6 Fiber. IV. Graft Copolymerization of Ethyl Methacrylate onto Nylon 6 Fiber by Photoirradiation

Grafting of nylon 6 fiber was carried out using ethyl methacrylate (EMA) as the monomer in various water-alcohol systems (i.e., water-methanol, water-ethanol and water-n-propanol; water-alcohol ratio 1:1) at 70°C using a carbon arc lamp as the source of photochemical initiation. Percent graft add-on (% GAO) increases continuously and linearly with an increase in monomer concentration irrespective of the media used. The % GAO, however, decreases with an increase in the alkyl chain length of the alcohol used in the following order: water-methanol > water-ethanol > water-n-propanol. With an increase in the time period of grafting, % GAO and total polymer yield (% TPY) increase continuously in all three media whereas the grafting efficiency (GE) first increases and then falls after reaching a maximum level. Although a similar trend is maintained in the three systems, there is a decrease in overall % TPY and % GAO from the water-methanol system to the water-n-propanol system through the water-ethanol system.     

Grafting Vinyl Monomers onto Nylon 6 Fiber. III. Graft Copolymerization of Vinyl Monomers onto Nylon 6 Fiber in Water Medium in the Presence of Fructose

Nylon 6 fiber was grafted with various vinyl monomers e.g., methyl methacrylate (MMA), ethyl methacrylate (EMA), and n-butyl methacrylate (n-BMA), in water in the presence of fructose using a carbon arc lamp as the source of photoirradiation at 70°C and a liquor ratio of 1:26. The effects of various parameters, e.g., monomer concentration, time of grafting, and fructose concentration on grafting reactions, were studied individually for each monomer. The graft yield is greatly enhanced by increasing the monomer concentration and the time of grafting. However, the optimum fructose concentration is required for maximum grafting efficiency. The accelerating action of photopolymerization by fructose was attributed to the sensitizing action of fructose involving an energy transfer.     

Grafting Vinyl Monomers onto Tussah Silk Fiber. I. Graft Copolymerization of Methyl Methacrylate onto Nonmulberry Tussah Silk by Tetravalent Cerium Ion

The graft copolymerization of methyl methacrylate onto nonmulberry natural tussah silk fibers was investigated in aqueous solution using tetravalent cerium as initiator. The rate of grafting was determined by varying the monomer concentration, the cerium (IV) concentration, the temperature, and the nature of the silk. With increasing monomer concentration the graft yield increased (up to 0.657 M) and thereafter decreased. The graft yield also increased with increasing cerium (IV) concentration. The graft-on was influenced by chemical modification of the tussah silk prior to grafting. The effect of certain inorganic salts on the rate of grafting was investigated.     

Grafting Vinyl Monomers onto Wool Fibers. VII. Graft Copolymerization of Methyl Methacrylate onto Wool Using Peroxydiphosphate-Thiourea Redox System

Graft copolymerization of methyl methacrylate onto wool was investigated in aqueous solution using the potassium peroxy-diphosphate-thiourea redox system as the initiator. The rate of grafting was determined by varying the monomer, peroxydi-phosphate ion, temperature, and solvent. The graft yield increases with increasing peroxydiphosphate ion up to 80 × 10^?-⁴ mol/L, and with further increase of peroxydiphosphate ion the graft yield decreases. The graft yield increases with increasing monomer concentration. The percentage of grafting decreases with increasing thiourea concentration. The rate of grafting increases with an increase of temperature. The effect of acid and water-soluble solvent and certain salts on graft yield has been investigated and a suitable rate expression has been derived.     

Grafting Vinyl Monomers onto Wool Fibers: Graft Copolymerization of Methyl Methacrylate onto Wool Using Ferric Acetylacetonate Complex

The graft copolymerization of methyl methacrylate (MMA) onto native and reduced Indian Chokla wool fibers was studied in aqueous solution using an acetylacetonate complex of Fe(III). Perchloric acid was found to catalyze the reaction. The rate of grafting was investigated by varying the concentration of the monomer and the complex, the acidity of the medium, and the solvent composition of the reaction medium. The graft yield increases with increasing concentration of the initiator and with increasing temperature. An increase of monomer concentration up to 0.5634 mol/L and of the HClO4 concentration up to 0.01 mol/L increases the graft yield. Reduced and oxidized wools were found to be better substrates than untreated, esterified, cross-linked, and trinitrophenylated wools. Among the various monomers studied, MMA was found to be the most active. A suitable kinetic scheme is proposed. From the activation energy data, average molecular weight, and spectral studies, the reactivity of -SH groups, and the extent of chain transfer is ascertained.     

Grafting Vinyl Monomers onto Silk Fibers. V. Graft Copolymerization of Methyl Methacrylate onto Silk with Potassium Permanganate as Initiator

The graft copolymerization of methyl methacrylate onto silk fibers in aqueous solution with the use of manganese (IV) ions as initiator was investigated. The rate of grafting was determined by varying monomer, acidity of the medium, temperature, nature of silk, and the reaction medium. The graft yield increases significantly with increase of manganese (IV) concentration up to 15 meq/liter; with further increase of manganese (IV) concentration, the graft yield decreases. The effect of the increase of monomer concentration brings about a significant enhancement in the graft yield up to 7%, and with further increase of monomer concentration the graft yield decreases. The graft yield is considerably influenced by chemical modification prior to grafting. The effect of some inorganic salts and anionic surfactants on the rate of grafting has been investigated.     

Grafting Vinyl Monomers onto Silk Fibers. XI. Graft Copolymerization of Methyl Methacrylate onto Silk Using Fe3+-Thiourea Redox System

The results of some investigations into the synthesis and characterization of a new class of oligomers and polymers, the polyselenoacetals, are described.     

Grafting of Vinyl Monomers onto Nylon

Polymer chemists have been successful in applying polymerization techniques to develop copolymers of natural and synthetic macromolecules [l]. The literature abounds with examples of the successful formation of copolymers from natural and synthetic macromolecules [2–5]. Copolymerization is attractive to chemists as a means of modifying macromolecules since, in general, degradation can be minimized. Despite the heterogeneity and complexity of these copolymers, much has been achieved in their characterization. The desirable properties of the polymer are retained and additional properties are acquired through the added polymer. The desired material may be formed in situ by polymerization of a monomer or monomers, by condensation of reactants, or by the decomposition of a preformed polymer.     

Grafting Vinyl Monomers onto Wool Fibers. X. Graft Copolymerization of Methyl Methacrylate onto Wool Using Acetylacetonato Complex of Manganese(lII)

The graft copolymerization of methyl methacrylate onto wool fibers was investigated in aqueous solution using the acetylacetonato complex of manganese(III). The rate of grafting was determined by varying the monomer, the complex, the temperature, the acidity of the medium, the nature of the wool, and the reaction medium. The graft yield increases with increasing monomer and complex concentrations. The graft yield also increases with increasing temperature. The grafting is considerably influenced by chemical modification of wool prior to grafting. A suitable mechanism has been proposed and a rate equation has been derived.     

Grafting Vinyl Monomers onto Silk Fibers: Graft Copolymerization of Vinyl Monomers onto Silk Using the Vanadyl Acetylacetonate Complex

Abstract

The graft copolymerization of methyl methacrylate (MMA) onto mulberry silk fibers was studied in aqueous solution using the acetylacetonate oxovanadium (IV) complex. The rate of grafting was investigated by varying the concentration of the monomer and the complex, the acidity of the medium, the solvent composition of the reaction medium, the surfactants, and the inhibitors. The graft yield increases with increasing concentration of the initiator up to 8.75 × 10^?5 mol/L, of the monomer up to 0.5634 mol/L, and thereafter it decreases. Among the various vinyl monomers studied, MMA was found to be most suitable for grafting. Grafting increases with increasing concentration of HCIO₄ and with increasing temperature. Inhibitors like picryl chloride and hydroquinone significantly decrease the extent of grafting. Alcoholic solvents at a solvents/water ration of 10:90 seem to constitute the most favorable medium for grafting. A suitable reaction scheme has been proposed, and the activation energy calculated from the Arrhenius plots.     

Grafting Vinyl Monomers onto Cellulose. IX. Graft Copolymerization of Methyl Methacrylate onto Cellulose Using Peroxydiphosphate-Fe(ll) and Mn(ll) Redox Systems

The vacuum or inert-atmosphere condensation of diphenyl isophthalate and 2,2′,3,3′-tetraaminobiphenyl to poly-2,2′-(m-phenylene)-5,5′-bibenzimidazole has been investigated. Evidence from polymer and model compound (diphenylbibenzimidazole) spectral studies, elemental analysis, and analysis of volatile effluent indicates that the prepolymer formed at 260 to 300°C contains both benzimidazole and hydroxybenzimidazoline but is essentially free from phenoxybenzimidazole structures. A mechanism involving loss of phenol initially, followed by evolution of water to give benzimidazole structures, is established from experimental evidence. Polymerization in vacuum to 400°C gives the polybenzimidazole.     

Graft Copolymerization of Vinyl Monomers onto Silk Fibers

Modification of the properties of textile fibers in order to get a fiber of improved textile performance is the subject of study of several groups of scientists and technologists [1–4]. Of the several methods available, grafting promises to be a potentially effective means of altering the fiber properties through the added polymer formed in situ without destroying the basic properties of the parent fiber. Copolymerization is attractive to chemists as a means of modifying macromolecules since, in general, degradation can be minimized. The desirable properties of the polymer are retained and copolymerization provides additional properties through the added polymer. The added polymer may be formed in situ by polymerization of a monomer or monomers, by condensation of reactants, or by the deposition of preformed polymer.     

Photoinduced Graft Copolymerization. V. Graft Copolymerization of Methyl Methacrylate onto Cellulose in the Presence of N-Bromosuccinimide as Initiator

Abstract

The photoinduced graft copolymerization of methyl methacrylate onto cellulose was studied using N-bromosuccinimide as the photoinitiator. The formation of graft copolymer increases with an increasing amount of cellulose. The graft copolymerization increases with increasing initiator concentration up to 1,25 × 10^?2 M and thereafter it decreases. The percentage of graft increases with increasing monomer concentration up to 46.9 × 10^?2 M and thereafter it decreases. The percentage graft-on increases with increasing temperature. The overall activation energy was computed to be 8.40 kcal/mol. The percentage graft was investigated using different water-miscible organic solvents. The graft copolymerization was also investigated using differently modified cellulose. A possible mechanism for the photo-graft copolymerization onto cellulose is suggested.     

Grafting onto Gelatin. II. Graft Copolymerization of Ethyl Acrylate and Methyl Methacrylate onto Gelatin in the Presence of Ce4+ as Redox Initiator

In order to initiate a comprehensive study of graft copolymerization of vinyl monomers onto soluble protein-gelatin, we have studied grafting of ethyl acrylate (EA) and methyl methacrylate (MMA) onto gelatin using eerie ammonium nitrate (CAN) and eerie ammonium sulfate (CAS) as the redox initiator in an aqueous medium. A small amount of mineral acid (HNO₃ with CAN and H2SO4 with CAS) was found to catalyze the graft copolymerization. Graft copolymerization reactions were carried out at different temperatures. Maximum grafting occurred at 65°C both with EA and MMA. Percentage grafting has been determined as function of 1) concentration of monomer (EA and MMA), 2) concentration of initiator (CAN and CAS), 3) concentration of acid (HNO3 and H2SO4), 4) time, and 5) temperature.     

Graft Copolymerization of Methyl Methacrylate onto Nylon 6 Using Thallium(III) Ions as Initiator

Abstract

Graft copolymerization of methyl methacrylate onto nylon 6 was investigated in aqueous perchloric acid medium using thallium(III) ions as initiator. The rate of grafting was evaluated by varying the concentrations of monomer, initiator, acid, and temperature. The rate of grafting was found to increase with an increase of both monomer and initiator concentrations. The graft yield was found to increase with an increase in the acid concentration up to 0.49 mL^?1, and beyond this concentration of perchloric acid the graft yield was found to decrease. It also increased with an increase of temperature. From the Arrhenius plot the overall activation energy was found to be 3.9 kcal/mol. The effects of inhibitors, various solvents, inorganic salts, and swelling agents on graft yield were studied. A suitable kinetic scheme has been proposed and a rate equation has been derived.     

Grafting onto Wool. IX. Graft Copolymerization of Vinyl Monomers by Use of Vanadium Oxyacetylacetonate as Initiator

Methyl methacrylate (MMA), acrylic acid (AAc), and vinyl acetate (VAc) were graft copolymerized onto Himachali wool in an aqueous medium by using vanadium oxyacetyl acetonate as initiator. Graft copolymerization was studied at 45, 55, 65, and 75°C for various reaction periods. The percentage of grafting was determined as functions of concentration of monomers, concentration of initiator, time, and temperature. The maximum percentage of grafting with each monomer occurred at 55°. Several grafting experiments were carried out in the presence of various additives which include HNO3, DMSO, and pyridine. Nitric acid was found to promote grafting of MMA. All these additives had adverse effects on grafting of VAc and AAc. MMA, VAc, and AAc were found to differ in reactivity toward grafting and followed the order MMA > AAc > VAc.     

Grafting onto Starch. IV. Graft Copolymerization of Methyl Methacrylate by Use of AIBN as Radical Initiator

Grafting of poly(methyl methacrylate) onto starch has been investigated in aqueous medium by using AIBN as radical initiator. Starch-g-PMMA has been characterized by determination of starch in the graft copolymer. Percentage of grafting has been determined as functions of concentration of monomer, concentration of initiator, reaction time, and temperature. From scanning electron microscopic studies, evidence for grafting of PMMA onto starch has been presented.     

Graft Copolymerization of Vinyl Monomers onto Cellulose and Cellulosic Materials

Abstract

Graft copolymerization is a novel method which has wide application in synthesizing new forms of polymeric materials and also in modifying the properties of natural polymers [1,2]. Much research has been done on grafting polymeric molecules on to cellulose to produce materials of new properties intermediate between those of cellulose and those of synthetics. A variety of property changes can be imparted to cellulose through grafting without destroying the crystallinity or crystallization potential of the substrate or reducing its melting point. Some of the most dramatic changes in properties which have been brought about by grafting to cellulose are viscoelasticity, stereoregularity, hygroscopicity, water repellency, improved adhesion to a variety of substances, settability, soil resistance, bacteriocidal properties, and thermal stability.     

Grafting onto Wool. XXVII. Graft Copolymerization of MixeD Vinyl Monomers by Use of Ceric Ammonium Nitrate as Redox Initiator

In order to ascertain the effect of a donor monomer, vinyl acetate (VAc), on the graft copolymerization of acceptor monomers, ethyl acrylate (EA) and butyl acrylate (BA), grafting of mixed vinyl monomers (EA + VAc) and (BA + VAc) was carried out on Himachali wool in aqueous medium using ceric ammonium nitrate (CAN) as a redox initiator. Graft copolymerization was carried out at different temperatures for various reaction periods. Percent grafting and percent efficiency were determined as functions of 1) concentration of mixed vinyl monomers, 2) concentration of CAN, 3) concentration of HNO₃ 4) temperature, and 5) reaction time. VAc, the donor monomer, was found to decrease percent grafting of EA and BA onto wool.     

Graft Copolymerization of Pyrrolidone onto Copolymers of N-Acryloyl Pyrrolidone and Vinyl Monomers

The copolymerizations of N-acryloyl pyrrolidone (NAP) with vinyl monomers methyl methacrylate (MMA), acrylonitrile (AN) and acrylamide (AA) were carried out in dimethylformamide at 65°C using 2,2′-azobisisobutyronitrile(AIBN) as an initiator. The resulting copolymers were used as a polymeric initiator of the anionic graft copolymerization of 2-pyrrolidone. The percent grafting of 2-pyrrolidone onto vinyl copolymer backbone chain involving N-acyllactam groups was found best with copoly(NAP-co-MMA) when the KOH concentration was 0.03 M. The presence of crown ether increased the viscosity of graft copolymers and accelerated the initial rate of anionic graft copolymerization.