含氟环形硅氧烷的立体异构和稳定性

文献曾报道, 1,3,5-三(3,3,3-三氟丙基)-1,3,5-三甲基环三硅氧烷(简称D^F~3)有两种立体异构体, 即顺式和反式。1,3,5,7-四(3,3,3-三氟丙基)-1,3,5,7-四硅氧烷(简称D^F~4)有四种异构体。但未报道其结构特点。本文试图进一步探讨D^F~3和D^F~4的立体异构体的结构和稳定性。     

A new efficient route for the synthesis of 4,4′,6,6′-tetra(azido) azo- 1,3,5-triazine

A new method for the synthesis of 4,4′,6,6′-tetra(azido)azo-1,3,5-triazine(TAAT)is described.The key intermediate 4,4′,6,6′- tetra(azido)hydrazo-1,3,5-triazine(TAHT)was synthesized by nucleophilic substitution in the case of sodium azide as nacleophile. N-Bromosuccinide(NBS)was used as oxidant to oxidize TAHT by a tractable operation under mild reaction condition.The target compound TAAT was obtained with a facile process and high overall yield of 81%.The structures of TAAT and its intermediates were identified by spectroscopic methods.     

Potentiometric microdetermination of 1,3,5-trinitro-1,3,5-triazacyclohexane and 1,3,5,7-tetranitro-1,3,5,7-tetrazacyclooctane in several solvents

Pyridine, tetramethylguanidine, and hexamethylphosphoramide were evaluated as solvents for the microdetermination of two weakly acidic compounds of ordnance interest, 1,3,5-trinitro-1,3,5-triazacyclohexane (RDX) and 1,3,5,7-tetranitro-1,3,5,7-tetrazacyclooctane (HMX). The titrant was tetrabutylammonium hydroxide in methanol/ toluene. Endpoints were determined potentiometrically by a glass/modified calomel electrode system or by two polarized platinum electrodes.The largest potentiometric break was found in the very basic solvent tetramethylguanidine. Endpoint detection using two polarized platinum electrodes significantly enhanced the precision of the analysis.     

Separation of 1,3,5,7‐tetranitro‐1,3,5,7‐tetraazacyclooctane and 1,3,5‐trinitro‐1,3,5‐ triazacyclohexane by molecularly imprinted solid‐phase extraction

Synthesis of 1,3,5,7‐tetranitro‐1,3,5,7‐tetraazacyclooctane and 1,3,5‐trinitro‐1,3,5‐triazacyclohexane by the Bachmann process leads to a mixture of both. The separation of 1,3,5,7‐tetranitro‐1,3,5,7‐tetraazacyclooctane and 1,3,5‐trinitro‐1,3,5‐triazacyclohexane from their mixture is difficult because the sizes and physical properties of these homologous compounds are similar. For this purpose, seven molecularly imprinted polymers have been synthesized for each explosive, and a selective solid‐phase extraction procedure has been developed. A molecularly imprinted polymer, synthesized with 1,3,5,7‐tetranitro‐1,3,5,7‐tetraazacyclooctane as the template, methacrylic acid as the monomer and trimethylolpropane trimethacrylate as the cross‐linking agent in a molar ratio of 1:8:8 showed the best separation capability. A packed cartridge containing this polymer can be reused for 23 solid‐phase extraction cycles without repacking, and the total separation capability toward 1,3,5,7‐tetranitro‐1,3,5,7‐tetraazacyclooctane reached 6.81 mg per gram of polymer. 1,3,5‐Trinitro‐1,3,5‐triazacyclohexane was not detected in the separated 1,3,5,7‐tetranitro‐1,3,5,7‐tetraazacyclooctane by high‐performance liquid chromatography and vice versa. This newly developed method had the advantages of high recovery (100%) and purity, environmental friendliness, and room temperature operability. This study showed that some molecularly imprinted polymers that cannot absorb target analytes well in the solvent in which the polymers were polymerized might have high‐binding capacity for the analytes and show imprinting effects in other solvents.     

Synthesis and characterization of permethylated 1,3,5-tri- and 1,3,5,7-tetracarbonyl compounds

Permethylated 1,3,5-tri- and 1,3,5,7-tetracarbonyl compounds were prepared and structurally characterized. 2,2,4,4-Tetramethyl-3,5-dioxoesters were prepared by condensation of 1,3-bis(trimethylsilyloxy)-1,3-butadienes with acid chlorides and subsequent reaction with methyl iodide. 2,2,4,4,6,6-Hexa-substituted 3,5-dioxopimelates were prepared by condensation of 1,3-bis(trimethylsilyloxy)-1,3-butadienes with methyl 3-chloro-3-oxopropanoate and subsequent methylation. The use of caesium carbonate as the base for the methylation proved to be important to achieve good yields. The conformation of the products was studied by experimental and theoretical methods (DFT calculations).     

Detection of the cyclic nitramine explosives hexahydro-1,3,5-trinitro- 1,3,5-triazine (RDX) and octahydro- 1,3,5,7-tetranitro- 1,3,5,7-tetrazine (HMX) and their degradation products in soil environments

The cyclic nitramine explosives hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) and octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazine (HMX) were examined in field and microcosm soil samples to determine their patterns of degradation and environmental fates. A number of analytical techniques, including solid-phase microextraction with on-fiber derivatization, gas chromatography-mass spectrometry, gas chromatography with electron-capture detection, liquid chromatography-mass spectrometry, and micellar electrokinetic chromatography were required for the analyses. Two different classes of intermediates were detected, both of which lead ultimately to the formation of nitrous oxide (N2O) and carbon dioxide (CO2). The first class was identified as the nitroso derivatives formed by the sequential reduction of -NO2 functional groups. The second class of intermediates, which was favored at higher humidities and in the presence of anaerobic sludge amendments, consisted of ring cleavage products including bis-(hydroxymethyl)-nitramine and methylenedinitramine. Rye-grass (Lolium perenne) present in field samples was found to extract and accumulate HMX from soil without further degradation. In all cases (excepting the plant samples), the indigenous microbes or amended domestic anaerobic sludge consortia degraded the cyclic nitramine explosives eventually to produce N2O and CO2.     

Solubility of 1,3,5,7-tetra azatricyclo[3.3.1.1]decane (HMT) in water from 275.15 K to 313.15 K

The water solubility of 1,3,5,7-tetra azatricyclo[3.3.1.1^3,7]decane, hexamethylenetetramine (HMT) or urotropine was determined at temperatures between 275.15 K and 313.15 K. Van’t Hoff graphs of ln m_sat versus 1/T gave three different straight lines, suggesting the existence of three different forms of the substance in the temperature region studied.

Previous work reported both increasing and decreasing solubility with temperature. This work found the solubility does not have a simple behavior.     

Solid phase microextraction-high performance liquid chromatographic determination of octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) and hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) in the presence of sodium dodecyl sulfate surfactant

A simple and sensitive method has been developed using preconcentration technique solid phase microextraction (SPME) and analytical technique HPLC-UV for the determination of octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) and hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) from the environmental samples. Aqueous solution of anionic surfactant SDS was used for the extraction of both nitramine high explosives, viz., HMX and RDX from soil samples which were subsequently sorbed on SPME fiber. The static desorption was carried out in the desorption chamber of the SPME-HPLC interface in the presence of mobile phase ACN/methanol/water (30:35:35) and the subsequent chromatographic analysis at a flow rate of 0.5 mL/min and detection at 230 nm. For this purpose, a C(18), 5 microm RP analytical column was used as a separation medium in this method. Several parameters relating to SPME, e.g., adsorption/desorption time, concentration of salt, stirring rate, etc., were optimized. The method was linear over the range of 20-400 ng/mL for HMX and RDX standards in the presence of surfactant in aqueous phase, respectively. The correlation coefficient (R(2)) for HMX and RDX are 0.9998 and 0.9982, respectively. With SPME, the detection limits (S/N = 3) in ng/mL are 0.05 and 0.1 for HMX and RDX, respectively in the presence of the SDS surfactant. The developed method has been applied successfully to the analysis of real environmental samples like bore well water, river water, and ground alluvial soil.     

Enhanced extraction of octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) and hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) in the presence of sodium dodecyl sulphate and its application to environmental samples

A method for enhanced extraction of octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) and hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) from environmental samples is developed with the assistance of sodium dodecyl sulphate (SDS) surfactant. In this study, the concentration of SDS surfactant and other analytical parameters are optimized on a high-performance liquid chromatography-UV system. An isocratic flow of 1.0 mL/min with mobile phase acetonitrile-water; 70:30 (v/v) at 230 nm wavelength on a reverse-phase amide column is used for baseline separation of explosives and making calibration curves. The amount of recovered explosives from spiked soil and water samples are calculated. The limits of detection obtained for HMX and RDX standards are 1.5 and 3.8 ppb (S/N=3), respectively, which are much better than obtained by the Environmental Protection Agency method 8330. The recoveries are found to be enhanced by 1.7 and 1.6-fold with SDS solution as compared to water for HMX and RDX, respectively, from soil samples.     

Synthesis of hexahydro 1,3,5-triCarbalkoxy-s-triazines,octahydro-1,3,5,7-tetracarbalkoxy tetrazocines and their interconvertibility

The condensations of urethanes with formaldehyde under appropriate experimental conditions affords either 1,3,5-triazines or 1,3,5,7-tetrazoeines. The two systems are interconvertible under acid catalysis.     

Bildung siliciumorganischer Verbindungen, 79. NMR-spektroskopische Untersuchung der 1,3,5-Trisilacyclohexane und 1,3,5,7-Tetrasilaadamantane

Formation of Organosilicon Compounds. 79. NMR-Spectroscopical Investigation of 1,3,5-Trisilacyclohexanes and 1,3,5,7-Tetrasilaadamantanes For several groups of isomeric 1,3,5-trisilacyclohexanes and 1,3,5,7-tetrasilaadamantanes, structure assignment and conformation analysis of given by elucidation of their ¹H-NMR spectra.     

特定乙烯基和硅氢键含量聚硅氧烷的可控制备

以1,3,5-三乙烯基-1,3,5-三甲基环三硅氧烷与六甲基环三硅氧烷为共聚单体,四氢呋喃为溶剂,在正丁基锂引发条件下实现可控阴离子开环共聚,制备特定乙烯基含量的聚硅氧烷;同时,以1,3,5,7-四甲基环四硅氧烷与六甲基环三硅氧烷为共聚单体,四氢呋喃为溶剂,在浓硫酸引发条件下实现可控阳离子开环共聚,制备特定硅氢键含量的聚硅氧烷,为制备具有特定乙烯基和硅氢键含量聚硅氧烷国防专用标准物质奠定了基础。     

Photochemical preparation of 1,3,5,7-tetracyanoadamantane and its conversion to 1,3,5,7-tetrakis(aminomethyl)adamantane

New adamantane derivatives 1 and 2 that bear functionalized one-carbon extensions at all four bridgehead positions have been prepared. Radical nucleophilic substitution (S(RN)1) reaction of 1,3,5,7-tetrabromoadamantane with cyanide produces 1,3,5,7-tetracyanoadamantane (1), which was reduced with borane reagents to 1,3,5,7-tetrakis(aminomethyl)adamantane (2). Improvements in the preparation of 1,3,5,7-tetrahaloadamantanes (halogen = Br, Cl, I) are also reported. [structure--see text]     

新型树状化合物1,3,5-三{3-[2,4,8,10-四氧杂\|9(3,5-二(2,6-二氧杂-4,4-二羟甲基环己基)苯基]螺[5.5]十一烷基}苯的制备

本实验采用季戊四醇与苯三甲醛缩合, 制成树状化合物1,3,5-三{3-|[2,4,8,10-四氧杂-9(3,5-二(2,6-二氧杂-4,4-二羟甲基环己基)苯基)螺[5.5]十一烷基}苯. 该类树状分子具有手性螺环结构, 手性密度很高, 可开发成理想的高效手性催化剂[3~8], 具有诱人的应用前景.     

Coordination chemistry of 2,4,6-tri(pyridyl)-1,3,5-triazine ligands

This review covers the rich coordination chemistry of 2,4,6-tri(pyridyl)-1,3,5-triazine ligands. These polypyridyl derivatives have been coupled to transition metals and lanthanides, and the complexes obtained have been used in various fields such as luminescent materials, for the preparation of coordination polymers and networks as well as for the synthesis of discrete metalla-assemblies. The synthetic and structural aspects of the different isomers of 2,4,6-tri(pyridyl)-1,3,5-triazine are presented, and a survey of their coordination chemistry is given.     

Synthesis of hyperbranched polyphenylenes by suzuki reaction and their spectral characteristics

New monomer—1,3,5-tri(4-pinacolatoborolanephenyl)benzene (2) was obtained by Suzuki reaction of 1,3,5-tri(4-iodinephenyl)bensene (1) with bis-pinacolatodiborolane in the presence of [1,1′-bis(dydiphenylphosfino)-ferrocene]di-chloropalladium(II) as catalyst (PdCl₂[dppf]). Hyperbranched polyphenylenes P1 and P3, which are blue light-emitting materials (410–430 nm), were also obtained by Suzuki reaction used different ratio of comonomers 1 and 2. Obtained polymers had a weight-average molecular weights of 4000–8000 and terminal iodine content of 27.5–14.2 wt % respectively. It was shown that polyphenylene’s quantum yields in solution decrease while iodine content increase.     

Synthesis of high molecular weight and narrow molecular weight distribution poly(acrylonitrile) via RAFT polymerization

Well‐defined polyacrylonitrile (PAN) of high viscosity‐average molecular weight (M_η = 405,100 g/mol) was successfully synthesized using reversible addition‐fragmentation chain transfer polymerization. The polymerization exhibits controlled characters: molecular weights of the resultant PANs increasing approximately linearly with monomer conversion and keeping narrow molecular weight distributions. The addition of 0.01 equiv (relative to monomer acrylonitrile) of Lewis acid AlCl₃ in the polymerization system afforded the obtained PAN with an improved isotacticity (by 8%). In addition, the influence of molecular weights and molecular weight distributions of PANs on the morphology of the electrospun fibers was investigated. The results showed that, under the same conditions of electrospinning, average diameter (247–1094 nm) of fibers increased with molecular weights of PANs, and it was much easier to get “uniform” diameter fibers while using PANs with narrow molecular weight distributions as the precursor of electrospinning. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Lipase‐catalyzed ring‐opening polymerization of 6(S)‐methyl‐morpholine‐2,5‐dione

Lipase‐catalyzed ring‐opening bulk polymerizations of 6(S)‐methyl‐morpholine‐2,5‐dione (MMD) were investigated. Selected commercial lipases were screened as catalysts for MMD polymerization at 100 °C. Polymerizations catalyzed with 10 wt % porcine pancreatic lipase type II crude (PPL), lipase from Pseudomonas cepacia, and lipase type VII from Candida rugosa resulted in MMD conversions of about 75% in 3 days and in molecular weights ranging from 8200 to 12,100. Poly(6‐methyl‐morpholine‐2,5‐dione) [poly(MMD)] had a carboxylic acid group at one end and a hydroxyl group at the other end. However, lipase from Mucor javanicus showed lower catalytic activity for the polymerization. During the polymerization, racemization of the lactate residue took place. PPL was selected for further studies. The rate of polymerization increased with increasing PPL concentration under otherwise identical conditions. When the PPL concentration was 5 or 10 wt % with respect to MMD, a conversion of about 70% was reached after 6 days or 1 day, respectively, whereas for a PPL concentration of 1 wt %, the conversion was less than 20% even after 6 days. High concentrations of PPL (10 wt %) resulted in high number‐average molecular weights (<3 days); with a lower concentration of PPL, lower molecular weight poly(MMD) was obtained. The concentration of water was an important factor that controlled not only the conversion but also the molecular weight. With increasing water content, enhanced polymerization rates were achieved, whereas the molecular weight of poly(MMD) decreased. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3030–3039, 2005     

Demetallation of α, β, γ, δ-tetra(p-sulfophenyl)porphineiron(III) in sulfuric acid-ethanol-water media

The rate of demetallation of α, β, γ,δ-tetra(p-sulfophenyl)porphineiron (III), Fe(TPPS)^3-, was determined in sulfuric acid-ethanol-water media for 8.5-10.65M sulfuric acid at different temperatures. The overall reaction was the conversion of the complex Fe(TPPS)^3- into the diacid species H₄TPPS^2- without other spectrophotometrically important species being formed to an appreciable extent, as shown by three isosbestic points at 418, 462, and 563 nm. The rate was first order in the Fe(TPPS)^3- concentration. The pseudo-first-order rate constants k were exponentially dependent on the sulfuric acid concentration, and log k was linearly dependent on the Hammett acidity function –H₀. The average ΔH? and ΔS? values for five reaction media were 18.4 ± 1.4 kcal/mol and 19 ± 3 cal/°K · mol, respectively. The linear relationship between log k and (-H₀) and the approximately constant values of ΔH? ΔS? over the acid range investigated indicated that the same mechanism of demetallation was operative over this acid range. Because of the dependence of the pseudo-first-order rate constants on the acidity of the medium, the mechanism probably involves the addition of protons to pyrrole N atoms to assist in the breaking of iron (III)-nitrogen bonds.     

Dispersion copolymerization of poly(oxyethylene) macromonomers and styrene

The kinetics of dispersion copolymerization of methacryloyl-terminated poly(oxyethylene) (PEO-MA) and p-vinylbenzyl-terminated (PEO-St) polyoxyethylene macromonomers and styrene (St), initiated by a water- and/or oil-soluble initiator, was investigated using conventional gravimetric and NMR methods at 60°C. The batch copolymerizations in the water/ethanol continuous phase were conducted to high conversion. The rate of polymerization was described by the curve with a maximum at very low conversion. The initial rate of polymerization and the number-average molecular weight were found to decrease with increasing [PEO-MA], and the decrease was more pronounced in the range of a high macromonomer concentration. The rate per particle (at ca. 20% conversion) was found to be proportional to the −1.55th, the particle size to the −0.92nd, and the number of particles (at final conversion) to the 3.2nd power of [PEO-MA], respectively. At the beginning of polymerization the continuous phase is the main reaction locus. As the polymerization advances, the reaction locus is shifted from the continuous phase to the polymer particles. The transform of the reaction loci from the continuous phase to the polymer particles increases the rate of polymerization and the polymer molecular weights. The increase of the weight ratio PEO-MA/St favors the formation of monodisperse polymer particles, the colloidal stability of dispersion, and the formation of a larger number of polymer particles. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3131–3139, 1997