Preparation and Characterization of Head-to-Head Polymers. II. Head-to-Head Poly(methyl Acrylate)

Head-to-head poly(methyl acrylate) was prepared by esterification of the known alternating copolymer of ethylene and maleic anhydride. Some of the chemical,physical, and mechanical properties and the thermal degradation behavior of head-to-head poly(methyl acrylate) were studied and compared with those of head-to-tail poly(methyl acrylate). The T_g of the head-to-head polymer was higher than that of the head-to-tail polymer, but the solubilities of both types of polymers of comparable molecular weight were similar. Head-to-head poly(methyl acrylate) degraded thermally at approximately the same temperature and with a rate similar to head-to-tail poly(methyl acrylate). Unlike poly(methyl cinnamates) which cleanly degraded to monomers, poly(methyl acrylates), head-to-head and head-to-tail, degrade to very small molecules, such as CO₂, methanol, but also larger polymer fragments and char. Trace amounts of monomers (methyl acrylate) were also observed.     

13C NMR spectroscopy of head-to-head polystyrene: Molecular motion in solution

Head-to-head polystyrene was studied by NMR relaxation measurements in solution and these measurements were compared with those for head-to-tail polystyrene. By measuring the relaxation of the ortho and meta carbons of the phenyl rings of the polystyrenes, it was found that the head-to-head polystyrene chain is stiffer (T_m = 65°) than the head-to-tail chain (T_m = 54°). These results are in agreement with the measurements of the radius of gyration, and results from the study of the melt rheology of head-to-head and head-to-tail polystyrene.     

Head-to-head polymers. XXIV. Synthesis of head-to-head polyisobutylene by Grignard coupling reaction

Head-to-head polyisobutylene of molecular weight 3000 to 10,000 was prepared in about 30% yield by Grignard coupling polymerization of 2,2,3,3-tetramethyl-1,4-dibromobutane with copper(I) tris(triphenylphosphino)bromide as the catalyst. Head-to-head polyisobutylene is crystalline, with a T_m of 187°C and a T_g of 87°C and still has bromine end groups left. The polymers have been characterized by their infrared, ¹H-, and ¹³C-NMR spectra and compared to the corresponding head-to-tail polymers of similar molecular weight. A substantial portion of the reaction product of the Grignard coupling polymerization is not polymeric but was identified as cyclized product, 1,1,2,2-tetramethylcyclobutane.     

Four-center type photopolymerization in the solid state. III. Polymerization of phenylene diacrylic acid and its derivatives

The solid-state photopolymerization of phenylene diacrylic acid (PDA) and its derivatives was studied as an application of solid-state photodimerization of cinnamic acid to photopolymerization of corresponding bifunctional molecule which has two cinnamic units in a single molecule. p- and m-PDA, and their esters and amides were prepared and investigated with respect to their photopolymerizability. Many of them have been found to polymerize into linear high polymers with the cyclobutane rings in the main chain on irradiation by ultraviolet or visible light. The polymerization process, the structure of the polymers, and their general properties were investigated in several ways. All the polymers are very similar to poly-2,5-distyrylpyrazine and poly-1,4-bis(β-pyridyl-2-vinyl) benzene with respect to their polymerization behavior, polymer structure, and some polymer properties: these polymers are soluble in a limited number of solvents, they have a high melting point and an extremely high crystallinity. On the basis of chemical behavior of poly-PDA and its phenyl ester the possible steric configurations of these polymers are discussed. It is demonstrated for the PDA series that solid-state dimerization can be generally extended to solid-state photopolymerization of the compound having two dimerizable units in a single molecule, although the crystal structure renders polymerization impossible in certain cases.     

Inclusion polymerization of various diene monomers in apocholic acid canals

The inclusion polymerization of diene monomers with different sizes and shapes in apocholic acid canals was studied under -ray irradiation. It was found that the sizes and shapes of monomers profoundly influenced the microstructures of the corresponding polymers obtaied. Thus, polybutadiene contained a significant amount of 1,2-units like usual radical polymerization in solution. Polyisoprene consisted of a mixture of head-to-tail and head-to-head (tail-to-tail) addition. The introduction of two methyl groups into butadiene led to the synthesis of polymers with almost exclusively head-to-tail, 1,4-trans structure.     

Head-to-head vinyl polymers. III. Preparation and characterization of head-to-head poly(acrylic acid) and its esters

Head-to-head (h-h) poly(acrylic acid) (PAA) and some h-h poly(alkyl acrylates) (PRA) with methyl, ethyl, n-propyl, n-butyl, isobutyl and 2-ethylhexyl substituents were prepared by hydrolysis or esterifications of the alternating copolymer of ethylene with maleic anhydride. In general, these esterification reactions became increasingly difficult as the carbon chain in the alcohols lengthened or branched. The softening, glass transition, and degradation temperatures of the h-h polymers obtained were somewhat higher than those of the corresponding head-to-tail (h-t) polymers. The main degradation products of both h-h and h-t PRA were identified by pyrolytic gas chromatography as the alcohol and monomer. In addition, the relative ratios of the amounts of alcohol to monomer were larger for h-h than for the corresponding h-t polymers.     

水溶性聚合物和两亲聚合物 16.聚苯乙烯/聚丙烯酰胺嵌段聚合物的合成和表征

采用聚偶氮酯引发剂,合成了聚苯乙烯/聚丙烯酰胺嵌段聚合物(PSt/PAM)。考察了含偶氮基聚苯乙烯预聚物(pre-PSt)在1,4-二氧六环中引发AM的聚合反应行为,讨论了影响第二单体转化率和聚苯乙烯均聚物含量的因素。用元素分析、溶解性、红外光谱、DSC、TG和裂解色谱表征了PSt/PAM嵌段聚合物。     

Synthesis of polymers with hydroxyl end groups by atom transfer radical polymerization

Polymers prepared by atom transfer radical polymerization (ATRP) contain end groups defined by the initiator used. Alkyl halides, used as initiators, lead to polymers with an alkyl group at one end and a halide as the other chain end. Using functionalized initiators such as 2‐hydroxyethyl 2‐bromopropionate, hydroxyl groups can be directly incorporated at one polymer chain end while the other end functionality remains a halogen. The direct displacement of the halogen end groups with hydroxyl groups was unsuccessful due to side reactions such as elimination (for polystyrene) or hydrolysis of ester functions (for polyacrylate). Another approach to generate hydroxyl end groups was based on the substitution of the halogen end groups by ethanolamine. This was successful for polystyrene but additional substitution at the backbone esters was observed in polyacrylates. Multiple substitution reactions could be avoided by using 4‐aminobutanol instead of 2‐aminoethanol. Hydroxyl terminated polyacrylates were also obtained by extending the polyacrylate chain end with one allyl alcohol unit in a one‐pot process by adding an excess of allyl alcohol at the end of e polymerization of acrylate.     

Anionic synthesis of polystyrene and polybutadiene heteroarm star polymers

The use of living linking reactions of poly(styryl)lithium with 1,3-bis(1-phenylvinyl)benzene followed by crossover reactions with styrene or butadiene monomers has been used to prepare four-armed heteroarm, star-branched polymers. Bimodal molecular weight distributions have been observed for crossover reactions with both styrene and butadiene. Addition of THF ([THF]/[Li]=14–32) for crossover to styrene and lithium sec-butoxide for crossover to butadiene produces monomodal molecular weight distributions. Symmetrical, four-armed star polystyrenes have been synthesized; properties have been compared with a corresponding polymer prepared via a silicon tetrachloride linking reaction. Heteroarm, star-branched polymers with two polystyrene arms and two polybutadiene arms with high 1,4-microstructure have been prepared.     

A facile one‐pot reactive solution blending approach for main‐chain donor–acceptor polymeric materials

A high‐temperature solution blending process has been used to synthesize a series of copolymers incorporating varying mole ratios of perylenebisimide (PBI) into the backbone of an engineering thermoplastic polyester [poly(1,4‐cyclohexylenedimethylene‐1,4‐cyclohexanedicarboxylate)] (PCCD). A random donor–acceptor copolymer incorporating oligo(p‐phenylene vinylene) (OPV) and PBI was also synthesized. The chemical incorporation of these chromophores into PCCD was confirmed by carrying out the melt condensation using 1,4‐cyclohexanedimethanol and 1,4‐dimethylcyclohexane dicarboxylate with hydroxyl‐functionalized PBI and OPV derivatives. Higher extent of incorporation of PBI (35 mol %) could be achieved using the blending approach retaining solubility, film‐forming ability, and higher molecular weights. The PBI polymers produced using the two different approaches exhibited structural variations. The polymers formed from the solution blending approach had a semicrystalline nature with blocks of PCCD separating the PBI units, whereas those produced using the melt condensation route were amorphous polymers. This structural variation was reflected in their photophysical properties also with the reactive solution‐blended polymers exhibiting higher fluorescence quantum yields. These results demonstrate the easy incorporation of suitably functionalized donor and acceptor moieties into a completely aliphatic polyester backbone to produce free‐standing films of hitherto nonprocessable polymers. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

水溶性聚合物和两性聚合物——Ⅰ.环氧乙烷-苯乙烯-环氧乙烷三嵌段聚合物(PEO—PSt—PEO)的合成和表征

用萘钠为引发剂的相继阴离子聚合合成了环氧乙烷-苯乙烯-环氧乙烷三嵌段聚合物(PEO-PSt-PEO),对经纯制的嵌段聚合物和母体聚苯乙烯用粘度法、GPC、¹H-NMR、折光指数增量(dn/dc)和溶解性测定等方法进行了表征。发现:1.在高引发剂浓度下,聚苯乙烯的[η]和M反而随[M]/[I]的减小而增加,说明存在引发剂的自抑制效应;2.嵌段聚合物在三种不同溶剂中的dn/dc与其组成有良好的线性关系,因此,dn/dc测定可作为确定嵌段聚合物组成的一个可靠方法;3.PEO-PSt-PEO三嵌段聚合物在THF中GPC谱图的峰值分子量与母体聚苯乙烯相似;4.聚苯乙烯含量较低的嵌段聚合物在THF中的溶解性较差。     

A Simple and Versatile Method for the Construction of Nearly Ideal Polymer Networks

Polymer networks usually contain numerous inhomogeneities that deteriorate their physical properties and should be eliminated to create reliable, high‐performance materials. A simple method is introduced for the production of nearly ideal networks from various vinyl polymers through controlled polymerization and subsequent crosslinking. Monodisperse star polymers with bromide end groups were synthesized by atom‐transfer radical polymerization and end‐linked with dithiol linkers using thiol–bromide chemistry. This simple procedure formed nearly ideal polymer networks, as revealed from elasticity of the formed gel and model conjugation reactions involving linear polymers. The versatility of this method was demonstrated by preparing networks of common vinyl polymers, including polyacrylates, polymethacrylate, and polystyrene. This method can be used to prepare multiple functional nearly ideal gels and elastomers and to explore fundamental aspects of polymer networks.     

Evaluation of pyridoindoles, pyridylindoles and pyridylpyridoindoles as matrices for ultraviolet matrix-assisted laser desorption/ionization time-of-flight mass spectrometry.

In an effort to gain an understanding of the processes governing ultraviolet matrix-assisted laser desorption/ionization (UV-MALDI), direct comparison was made of the mass spectra of proteins, carbohydrates and synthetic polymers (polyethylene glycol, polyester and polyamide) by using pyridylindoles, pyridoindoles and pyridylpyridoindoles as UV (337 nm)-MALDI-TOFMS matrices in positive and negative ion mode. In order to study the combined effect of the indole N-H and the pyridine nitrogen of the MALDI matrix on the desorption/ionization process in MALDI, compounds were selected that include either or both of these functions in their structure. Within the compounds studied only those that possess simultaneously both functions in a 1,4-relation behave as very good matrices for proteins. These compounds also work as matrices for some carbohydrates and synthetic polymers used as analytes in the present study. Some of the compounds were also found to be useful for the post-source decay (PSD) analysis of cyclodextrins in positive and negative ion mode. In several cases we also examined the matrix behavior of the corresponding N-methylindole derivatives.     

Synthesis,polymerization, and isomerization of isoimide containing acrylate esters

Several isoimides substituted with hydroxylated substituents were prepared, and allowed to react with acryloyl chloride to form the corresponding acrylate esters. The acrylates were polymerized free radically using AIBN as the initiator yielding medium molecular weight polyacrylates. Upon warming the prepared polyacrylates or treatment with base most of the isoimide pending groups rearranged to the stable form of the corresponding imides. These rearrangements were accompanied by increase in softening points of the polymers forming thermally more stable resins. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3125–3130, 1997     

STUDIES ON BIPYRIDINIUM SALTS AND THEIR POLYMERS Ⅰ. SYNTHESIS OF 4, 4''-(1, 4-PHENYLENE-)BIS-[N-ALKYL (ARYL)-2, 6-DIPHENYL-] PYRIDINIUM SALTS AND THEIR POLYMERS FROM CORRESPONDING BIPYRYLIUM SALT*

The reaction of pyrylium salt with primary amine has been utilized to synthesize 4,4'-bipyri-dinium salts and pyridinium polymers. Seven new 4,4'-(1,4-phenylene-) bis-[N-alkyl(aryl)-2,6-diphenyl-] pyridinium perchlorates 4 and five corresponding bipyridinium polymers 5 were preparedwith good yields from 4,4'-(1,4-phenylene-) bis-(2,6-diphenyl-) pyrylium perchlorate 3. Preliminarytests have been made for their redox behavior and catalytic activity.     

Immiscibility,upper critical solution temperature,and miscibility in blends of poly(vinyl ether)s with polyacrylics: Effects of pendant groups

Various phase behavior of blends of poly(vinyl ether)s with homologous acrylic polymers (polymethacrylates or polyacrylates) were examined using differential scanning calorimetry, optical microscopy (OM), and Fourier‐transformed infrared spectroscopy. Effects of varying the pendant groups of either of constituent polymers on the phase behavior of the blends were analyzed. A series of interestingly different phase behavior in the blends has been revealed in that as the pendant group in the acrylic polymer series gets longer, polymethacrylate/poly(vinyl methyl ether) (PVME) blends exhibit immiscibility, upper critical solution temperature (UCST), and miscibility, respectively. This study found that the true phase behavior of poly(propyl methacrylate)/PVME [and poly(isopropyl methacrylate)/PVME)] blend systems, though immiscible at ambient, actually displayed a rare UCST upon heating to higher temperatures. Similarly, as the methyl pendant group in PVE is lengthened to ethyl (i.e., PVME replaced by PVEE), phase behavior of its blends with series of polymethacrylates or polyacrylates changes correspondingly. Analyses and quantitative comparisons on four series of blends of PVE/acrylic polymer were performed to thoroughly understand the effects of pendant groups in either polyethers (PVE's) or acrylic polymers on the phase behavior of the blends of these two constituents. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1521–1534, 2007     

Preparation and degradation of head-to-head PVC

The course of the chlorination reaction of cis-1,4-polybutadiene is dependent on the choice of solvent. When methylene chloride is used, a pure addition reaction of chlorine leads to a polymer with the structure of head-to-head, tail-to-tail PVC. The thermal stability of the head-to-head PVC polymer has been studied by thermal volatilization analysis, thermogravimetry, and evolved gas analysis for hydrogen chloride, and the changes in the ultraviolet (UV) spectrum of the polymer during degradation have been investigated. The head-to-head polymer has a lower threshold temperature of degradation than normal PVC, but reaches its maximum rate of degradation at a higher temperature for powder samples of the polymer under programmed heating conditions. Blends of head-to-head PVC with poly(methyl methacrylate) have also been degraded, and the presence of the head-to-head polymers, like that of normal PVC, results in depolymerization of the PMMA as soon as the dehydrochlorination reaction commences. The mechanism of degradation of head-to-head PVC is discussed.     

Radiation luminescence of polymers—Emission behavior of aromatic compounds incorporated in synthetic rubbers

For a deep understanding of a radiation protection mechanism of some aromatic compounds on synthetic polymers, their optical emission behavior under electron irradiation was studied. The fluorescence light was led out of an irradiation room through a wave guide and detected by a photomultiplier so that less noisy spectrum was obtained. Acenaphthene or acenaphthylene was added to the synthetic rubbers such as ethylene propylene diene terpolymer, styrene butadiene rubber and cis-1,4-polybutadiene. The intensities of optical emission induced by electron beams changed from polymer to polymer, while those by ultraviolet lights were independent of the kind of polymers. The dependence of emission intensity on polymers under electron irradiation was estimated to show the fact that the radiation excited energy transfers occur from the polymer matrix to the additives and that an efficiency of the energy transfer is dependent on kinds of polymers.     

The role of molecular mechanics in the prediction of the chain conformation of polymers in the crystalline state: Syndiotactic polymers

Molecular mechanics methods have been used in order to find the conformations of various syndiotactic polymers in crystals. Three different classes of polymers have been examined: i) polyolefins, such as poly(propylene), polystyrene, poly(1‐butene) and poly(1,2‐butadiene); ii) polydienes, such as cis‐1,4‐poly(1,3‐pentadiene); iii) alternating copolymers of carbon monoxide with styrene or styrene derivatives. The presence of conformational polymorphism in some of the studied polymers is predicted and explained by maps and minimizations of the conformational energy. The calculated internal parameters and chain axis repeats of all the considered polymers result in very good agreement with X‐ray experimental data reported in literature. The role of intramolecular nonbonded interactions in determining the conformations of the polymer chains is thoroughly discussed.     

Effects of blending on the polymorphic behavior of melt-crystallized syndiotactic polystyrene

The complex polymorphic behavior of syndiotactic polystyrene (s-PS) in melt-crystallized samples is altered by blending with poly (2,6-dimethyl-1,4-diphenylene oxide) (PPO). In particular, to render the beta form in these blends, starting with samples containing the α or γ froms, requires much lower temperatures and shorter melting times than for pure s-PS. On the basis of the results, it is suggested that this phenomenon is due to more rapid loss of the memory of the α form, for the same temperature and time, in the melt in the presence of PPO molecules.