Sulfur-Containing Vinyl Monomers. XV. Kinetic Study of Radical Polymerization of Vinyl Mercaptobenzothiazole and Its Copolymerization

A kinetic study of radical polymerization of vinyl mercaptobenzothiazole (VMBT) with α,α′-azobisisobutyonitrile (AIBN) at 60°C was carried out. The rate of polymerization (R_p) was found to be expressed by the rate equation: R_p = k[AIBN]^0.5 [VMBT]^1.0, indicating that the polymerization of this monomer proceeds via an ordinary radical mechanism. The apparent activation energy for overall polymerization was calculated to be 20.9 kcal/mole. Moreover, this monomer was copolymerized with methyl methacrylate, acrylonitrile, vinyl acetate, phenyl vinyl sulfide, maleic anhydride, and fumaronitrile at 60°C. From the results obtained, the copolymerization parameters were determined and discussed.     

Sulfur-Containing Vinyl Monomers. XIV. Radical Polymerizations and Copolymerizations of Vinyl Mercaptobenzazoles

Vinyl mercaptobenzazoles [thiazole (VMBT), oxazole (VMBO), and imidazole (VMBI)] were prepared through dehydrochlorination of the respective β-chloroethyl mercaptobenzazoles. These monomers were found to undergo vinyl polymerization in the presence of light or radical initiator, α,α'-azobisisobutyonitrile, to give relatively high molecular weight homopolymers. From the results of radical copolymerizations of these monomers with various monomers, the copolymerization parameters were determined as follows: VMBT(M₂): r₁ styrene(M₁): r₁ = 2.12 ± 0.09, r₂ = 0.336 ± 0.028, Q₂ = 0.75, e_z = ?1.38; VMBO(M₂)-styrene(M₁): r₁ = 2.61 ± 0.13, r₂ = 0.274 ± 0.03, Q₂ = 0.61, e₂ = ?1.38; VBMI(M₂)-styrene(M₁) r₁ =4.0, r₂ = 0.2, Q₂ = 0.37, e₂ = ?1.17. The polymerization reactivities of these monomers obtained from these parameters were compared with those of other vinyl sulfide monomers and discussed.     

乙烯基二联苯单体的螺旋选择性自由基聚合

为了深入理解乙烯基二联苯单体自由基聚合过程中的手性传递,进行了手性单体(+)-2-[(S)-异丁氧羰基-5-(4′-己氧基苯基)苯乙烯、非手性单体2-丁氧羰基-5-(4′-己氧基苯基)苯乙烯的均聚反应及它们二者的共聚反应,探讨了聚合温度和溶剂性质对手性单体均聚物旋光活性、手性单体含量对共聚物旋光活性以及聚合反应溶剂的超分子手性对共聚物旋光活性的影响.研究发现,降低聚合温度、采用液晶性反应介质有利于得到旋光度大的聚合物;少量手性单体的引入即可诱导共聚物形成某一方向占优的螺旋构象,比旋光度随手性单体的含量增加呈线性增长;在胆甾相液晶中制备的非手性单体聚合物不具有光学活性.这些结果表明,该类乙烯基二联苯聚合物具有动态螺旋构象,其光学活性主要依赖于主链的立构规整度和侧基不对称原子的手性.     

Radical Polymerization of Vinyl Monomers in Porous Organic Cages

The radical polymerization of vinyl monomers was performed in a tetrahedral imine‐linked organic cage with extrinsic porosity (CC3). Because of its dynamic and responsive packing structure, CC3 endowed the polymerization with specific behaviors. The adsorption of styrene triggered a change in the CC3 assembly, resulting in a monomer arrangement that was suitable for polymerization within the host matrix. The polymerization reaction was strongly dependent on the crystallinity of CC3 and was promoted by amorphization of the host in a cooperative manner, which is not possible with conventional rigid porous materials. Furthermore, CC3 can recognize the polarity of substrates, and thus polar monomers, such as methyl methacrylate and acrylonitrile, could not induce the structural changes in CC3 that are required for polymerization. This monomer specificity governed by the flexibility of CC3 is useful to the prevent incorporation of unfavorable monomers into the polymeric products.     

氧气分子参与的乙烯基单体自由基聚合

尽管被公认在自由基聚合中往往起着缓聚、阻聚或链转移的作用,越来越多的结果表明,在某些情况下,如高温、高压,或当某些催化剂存在时,氧气分子(O2)可以参与甚至加速乙烯基单体的自由基聚合。本文综述了上世纪90年代以来,O2参与的乙烯基单体的热/光诱导自由基聚合、化学引发自由基聚合、氧载体催化自由基聚合以及可逆加成-断裂链转移自由基聚合。以上结果表明,在上述情况下,O2,作为一个普通不饱和单体,可以与苯乙烯、甲基丙烯酸甲酯等乙烯基单体形成交替共聚物(聚过氧化物),而此类聚过氧化物均可裂解为自由基。     

Studies on the Polymerization of Bifunctional Monomers. XIX. Radical Cyclopolymerization of Divinylformal

Radical polymerizations of divinylformal were carried out with AIBN initiator in several solvents. In many solvents (benzene, cyclohexane, acetonitrile, DMSO, etc.), the polymers consisted of the cyclized monomer unit and 5 to 8= of the pendant formate group. The amounts of the residual vinyl group were quite small in these solvents. The formate group was probably formed by the hydrogen migration and the subsequent ring scission of the cyclic propagating radical. On the other hand, a polymer obtained in CS₂ contained about 30= of the pendant vinyl group but no formate group. In addition, the carbon and hydrogen contents of this polymer were lower than expected, and sulfur was detected instead. The polymerization in benzene-CS₂ mixtures indicated a much stronger influence of CS₂ than benzene. These results suggest that CS₂ molecules interact strongly with the propagating radical to the extent that it can be incorporated into polymer.     

Vinyl Polymerization 204. Initiation Mechanism of the Radical Polymerization of Vinyl Monomers by p-Methoxy -p'-nitrobenzoyl Peroxide and Tertiary Amines

Abstract

A study of the reaction of tertiary amines with p-methoxy-p'-nitrobenzoyl peroxide in the presence of styrene was made in benzene. Anisic acid and p-nitrobenzoic acid were obtained from the reaction product. Using gas chromatography, the molar ratio of the amount of the above two acids was measured and classified into three types, according to the kind of amine used. From the results the reaction mechanism was discussed, and it was concluded that the oxygen which stands adjacent to the p-methoxybenzoyl group may be charged more positively and may be the more predominantly attacked by tertiary amine.     

Radical Photopolymerization of Vinyl Monomers

Abstract

Photopolymerization is the initiation by light of a chain polymerization process. In the more general sense, photopolymerization implies the increase of molecular weight caused by light. Photopolymerization is not only useful for the detection and identification of photochemically produced free radicals; since photopolymerization reactions can be started or stopped at will by the simple expedient of turning on or off light, a means is provided for studying the nonsteady-state kinetics of polymerization [1]. Photopolymerization also allows for the subtle control of molecular weight and molecular weight distribution by varying the intensity of light. Photopolymerization can be confined to local regions since the light can be spatially controlled. Photopolymerization can be carried out at very low temperatures. Hence, chain-transfer processes leading to branched macromolecules will be absent. Photopolymerization at low temperature yields the low-energy stereospecific polymeric species, namely the syndiotactic configuration of the polymer [2]. Certain monomers can only be polymerized at low temperature, i.e., they have low ceiling temperatures; the photopolymerization offers this possibility [3]. Because photopolymerization need not be carried out at elevated temperatures, it has applications to biochemistry. One important application of the method is in disk electrophoresis [4]. Photopolymerization played an important role in the early development of polymer chemistry. One of the first procedures for polymerizing vinyl monomers was to expose the monomer to sunlight. Blyth and Hoffman [5] reported the polymerization of styrene by this method in 1845.     

多官能团乙烯基单体原子转移自由基交联聚合机理

乙烯基单体;原子转移自由基交联聚合;聚合机理;交联网络     

Stereogradient Polymers Formed by Controlled/Living Radical Polymerization of Bulky Methacrylate Monomers

Life RAFT : A bulky methacrylate monomer, triphenylmethyl methacrylate (TrMA), was polymerized with reversible addition–fragmentation chain transfer (RAFT) agents. Stereogradient polymers in which the isospecificity increased spontaneously as the monomer concentration decreased were formed by a polymerization–depolymerization equilibrium that can convert a less stable growing polymer terminal into a more stable form (see picture).

     

Electroinitiated Anionic Polymerization of Vinyl Monomers

Abstract

Polarographic reduction and electrolytically initiated anionic polymerization of various monomers have been investigated with tetra-n-butylammonium perchlorate in dimethoxyethane.     

Ionic Polymerization of Vinyl Aromatic Monomers

The ionic polymerization of vinyl monomers possessing aromatic and heterocyclic functional groups has not been studied in any systematic fashion. Only in a few isolated cases have detailed mechanistic and structural studies been reported. The anionic polymerization of a number of vinylanthracene monomers has recently been investigated and some rationalization of this system is presented. The cationic and anionic polymerization of the N-, 3-, and 2-vinylcarbazole series of monomers is discussed in some detail. The important role of vinyl aromatic/vinyl heterocyclic monomers, i.e., diphenylethylene and the vinylcarbazoles, in elucidating the mechanistic aspects of cationic polymerization, “change transfer” polymerization, and photoionic polymerization is considered.     

烯类单体在室温离子液体中的自由基聚合反应研究进展

介绍了室温离子液体在烯类单体自由基聚合反应中的主要应用,结合国内外研究现状和作者实际工作中的体会,提出了对今后发展趋势的看法。     

Polymerization of Vinyl Monomers Using Oxidase Catalysts

Polymerization of vinyl monomers using oxidase as catalyst has been performed under argon in the presence of acetylacetone as a mediator and without the use of hydrogen peroxide. The polymerization of acrylamide was catalyzed by a laccase or sarcosine oxidase catalyst in distilled water and efficiently produced the polymer with high molecular weight. In the polymerization using the laccase catalyst, the effects of temperature, time, and amounts of enzyme and mediator have been systematically investigated. On the other hand, various other oxidases such as bilirubin, choline, and xanthine oxidases showed no or little activity for the vinyl polymerization. The laccase/acetylacetone catalyst induced the polymerization of methyl methacrylate and styrene in a mixture of water and tetrahydrofuran. Laccase alone also acted as a catalyst for the vinyl polymerization of acrylamide and methyl methacrylate without acetylacetone. In the polymerization of methyl methacrylate using lipoxidase as the catalyst in the presence of acetylacetone, the reaction occurred in air.     

Stereoselective Polymerization of Aromatic Vinyl Polar Monomers

Polar vinyl polymers, a class of polymers with polar groups as side chains, have significant advantages over conventional nonpolar polyolefin materials in terms of viscosity, toughness, interfacial properties (dyeability and printability), and compatibility with solvents or other polymers. Among them, aromatic polar vinyl polymers are of interest because of their good heat resistance properties. In addition, stereoselective polymerization of aromatic polar vinyl monomers has been rapidly developed because the steric structure of the polymer has a significant impact on its physical properties. In this paper, we review the research progress of stereoselective polymerization catalysts for aromatic polar vinyl monomers in recent years, discuss in detail the influence of ligand structure, electronic effect of substituents, spatial site resistance effect, central rare earth metal species and polymerization solvents on the activity and stereoselectivity of polymerization reactions, and explore the possible mechanism of polymerization reaction.     

Vinyl Polymerization. 374. Radical Polymerization of Vinyl Monomer Initiated with Sodium Polystyrenesulfonate

The polymerization of vinyl monomer initiated by an aqueous solution of sodium polystyrenesulfonate (PSS-Na) was carried out at 85°C. Methyl methacrylate (MMA) and styrene were polymerized, while acrylonitrile was not. The rate of polymerization of MMA decreased with the increase of the degree of polymerization of PSS-Na. However, the polymerization was not initiated by sodium ethyl benzenesulfonate which was a unit molecule of PSS-Na. The polymerization proved to be a radical reaction. The polymerization was considered to commence with the formation of hydrophobic areas with PSS-Na in the aqueous phase. MMA is incorporated into these areas, and there the polymerization is initiated and proceeds. The hydrophobic areas were assumed to be similar to the micelles formed by anionic detergents such as sodium alkylbenzene sulfonate. An initiation mechanism is proposed.     

Crown Ether As The Phase-Transfer Catalyst for Free Radical Polymerization of Hydrophobic Vinyl Monomers

Various crown ethers were used as phase-transfer catalysts for free radical polymerizations of some water-insoluble vinyl monomers such as acrylonitrile, methylmethacrylate and styrene with persulfate as initiator. The catalytic abilities of these crown ethers for free radical polymerization of acrylonitrile with S₂O₈^2?ion as an initiator were in the order: 18-crown-6 > 15-crown-4 > 12-crown-4 > benzo-15-crown-5 > dibenzo-18-crown-6. Among various persulfates such as Na₂S₂O₈ K₂S₂O₈ and (NH₄)₂S₂O₈, ammonium persulfate was the optimum initiator for the polymerization of acrylonitrile catalyzed by 18-crown-6 or 15-crown-5. Among the organic solvents used, chloroform seems to be the best solvent for the catalytic polymerization of acrylonitrile. An apparent activation energy of 72.9 kJ mol^?1 was observed for the polymerization of acrylonitrile. The catalytic reaction rates of free radical polymerization for these hydrophobic vinyl monomers were in the order: acrylonitrile > methylmethacrylate > styrene > isoprene. Effects of concentrations of crown ether, initiator, and nitrogen on the polymerization of these vinyl monomers were investigated.     

Bulk Free Radical Polymerization of Methyl Methacrylate and Vinyl Acetate: A Comparative Study

The model and methodology for estimating diffusion‐controlled rate coefficients for the methyl methacrylate (MMA) polymerization system is extended to the vinyl acetate (VAc) case. Comparison of the kinetic behavior and termination rate coefficients (k_t) of both monomers suggests that at low conversions the termination reaction is controlled by the chemical step, whereas at moderate and high conversions it is controlled by the diffusive step which in turn is determined by the segmental diffusion of the long radicals and not by the center of mass diffusion of short radicals. It is found that, for most of the conversion range, diffusion coefficient for VAc is lower than the one for MMA notwithstanding that k_tVAc > k_tMMA. An explanation of this apparent inconsistency on the base of the model results and in terms of segmental mobility is proposed.

     

Synthesis and Polymerization of Carbamate-Linked Cyclodextrin Methacrylate Monomers

Abstract

A one-step synthesis for cyclodextrin methacrylate monomers was examined starting from α-, β- and γ-cyclodextrin. The reaction of 2-isocyanatoethyl methacrylate as well as allylisocyanate with the corresponding cyclodextrin gave the monofunctionalized carbamate-linked cyclodextrin methacrylates 2, 6 and 9 and allylcarbamates 11 and 14 in moderate yields. By NMR spectroscopic means, it could be proven that in all cases only the primary 6-hydroxyl groups of the cyclodextrins reacted with the isocyanate group. For the synthesis of a β-cyclodextrin monoallyl compound, a substitution reaction of purchasable 6-O-monotoluenesulfonyl-β-cyclodextrin with allylamine gave 6-N-allylamino-6-deoxy-β-cyclodextrin 18 in high yield. The reaction of 2-isocyanatoethyl methacrylate with α-cyclodextrin to the 6-O-carbamoyl-2-methylpropenoylethyl-α-cyclodextrin (2) was optimized so that the monomer 2 could be prepared on a larger scale without chromatographic separation. The aqueous radical homopolymerization of 2 with the peroxodisulfate/bisulfite redox initiator gave the water soluble cyclodextrin polymer 19 in good yield. Its molecular weight was determined by gel permeation chromatography to be M_n = 101,800 corresponding to an average degree of polymerization P_n = 90.