Cyclic acetal-photosensitized polymerization. VII. Photopolymerization of 2-vinyl-4-hydroxymethyl-1,3-dioxolane

In order to assess the effect of the methylol group at the 4-position of 1,3-dioxolane on polymerization, the photopolymerization of 2-vinyl-4-hydroxymethyl-1,3-dioxolane (VHDO) was carried out in benzene at 40°C. The reaction scheme of VHDO was considered to be the same as that of 2-vinyl-1,3-dioxolane (VDO). The rate of polymerization and the molecular weight of polymer were small because of the degradative chain transfer by allylidene group. Moreover, the rate of polymerization of VHDO was greater than that of VDO, whereas the molecular weight of polymer of VHDO was less than that of VDO.     

Cyclic Acetal-Photosensitized Polymerization. 9. Photopolymerization of Triallylidene Sorbitol

Abstract

The photopolymerization of triallylidene sorbitol (TAS) was carried out in benzene at 40°C without the usual initiator. The polymerization of TAS was found to be initiated with the ester radical generated via the acetal radical from TAS by means of photoirradiation. The rate of polymerization and the molecular weight of polymer were small due to the degradative chain transfer, It was kinetically investigated from the standpoints of the degradative chain transfer by the allylidene group and the cyclization by three double bonds. The following results were obtained: (1) The relation between the rate of polymerization, R_p, the monomer concentration, [M], could be expressed by [M] /R_p = (A[M] + B)/(3[M] + C), where A, B, and C were constant; (2) the ratio of the rate constant of unimolecular cyclization to the total rate constant of bimolecular propagation and the chain transfer of uncyclized radical was estimated to be 3.0 mol/dm³. A small amount of cyclopolymerization took place.     

聚甲基丙烯酸正烃酯的微观立构规整性

用碳13核磁共振谱(~(13)C NMR)测定了游离基聚合的聚甲基丙烯酸正烷基酯(PMA-1,-6,-7,-8,-10,-12,-14)的微观立构规整性。发现酯基的长短对规整性影响甚小, 聚合物以间规占多数。认为此现象与游离基聚合反应中链增长过程末端游离基的结构有关, 本文给予初步的解释.     

Polymerization of coordinated monomers. XXII. Ab initio molecular orbital study on the binary radical complexes of 2-methoxycarbonyl propyl radical with boron trichloride and with boron trifluoride as a model of growing radical end

The geometrical and electronic structures of the binary radical complexes of 2-methoxycarbonyl propyl radical with boron trichloride and with boron trifluoride were determined by using an ab initio molecular orbital method. The 2-methoxycarbonyl propyl radical complex was a model of the growing radical end in the copolymerization of methyl methacrylate in the presence of boron halides. The most stable structure of the binary radical complex composed of 2-methoxycarbonyl propyl radical with boron trichloride was a twisted form in which the dihedral angle between the vinyl group and the ester group was 32°, while that of the binary radical complex composed of methyl methacrylate radical with boron trifluoride was a planar form as the free radical. The frontier orbital energy of 2-methoxycarbonyl propyl radical was lowered by 0.06 au by the coordination of boron trichloride, while that was lowered only by 0.02 au by the coordination of boron trifluoride. The polymerization mechanism was elucidated on the basis of these predictions. © 1993 John Wiley & Sons, Inc.     

Spin trapping of propagating radicals derived from dialkyl fumarates

Propagating radicals of dialkyl fumarates (DRFs) and deuterated fumarate were trapped by admitting a 2-methyl-2-introsopropane (BNO) solution to the polymerization mixture containing the active radicals or by the polymerizations initiated with di-t-butyl hyponitrite in the presence of BNO. Although ESR spectra of the propagating radicals were appreciably changed with the size of the ester alkyl groups, all the nitroxyl radicals resulting from the spin trapping exhibited similar six-line spectra. The hyperfine splitting constant for the α-hydrogen of the radical moiety showed a slight dependence on the chain length, and the bulkiness of the ester alkyl group did not affect splitting of the spectra. These findings indicate that a substituted methylene radical is produced by addition of the primary radical to DRF followed by propagation throughout the polymerization and that poly(DRF) radical does not encounter severe hindrance in the reaction with BNO.     

Radical polymerization of 2,5‐norbornadienes containing ester groups by AIBN and oxygen gas

New 2,5‐norbornadiene‐type monomers bearing 1‐adamantyl and cyclohexyl ester groups on their 2‐position polymerized with azobisisobutyronitrile to form the polymers consisting of two types of polymer unit structures. The major part had a saturated nortricyclene framework, which was formed by 2,6‐addition along with intramolecular cyclization on the norbornadiene moiety. The minor part consisted of 2‐norbornene‐type units constructed via 2,3‐addition. A series of norbornadiene‐based monomers spontaneously polymerized in the presence of oxygen. Because a radical inhibitor, namely hydroquinone, could suppress this spontaneous reaction, it was indicated that the oxygen‐induced polymerization proceeds via free‐radical polymerization mechanism. Changing a quantity of provided oxygen gas (O₂) to a norbornadiene monomer significantly affected on polymerization results, in specific, molecular weight of the formed polymer, which indicated that oxygen serves as one of the key reagents for the formation of free‐radical initiating species. It was proven that the combination of norbornadiene ethyl ester with O₂ was applicable as a new free‐radical initiator for polymerization of methyl methacrylate. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2528–2536     

A General Strategy To Access Alternating Styrene/Substituted Styrene Copolymers by Using a Traceless Controlling Group

We herein report a synthetic strategy for alternating copolymers of styrene and substituted styrenes by utilizing α-styryl boronate pinacol ester ( StBpin ) as the co-monomer through radical alternating copolymerization followed by protodeboronation. The excellent alternating polymerization behavior of the StBpin co-monomer in such a radical polymerization system is considered to be attributed to the steric hindrance and radical stabilization exerted by the Bpin group. This strategy is effective with a wide range of substituted styrene co-monomers regardless of the electronic nature of the substituents, and the protodeboronation of the alternating Bpin-containing polymers is highly efficient without polymer backbone alternation. RAFT living polymerization was also compatible with this approach. Thus, this strategy provides a way to build-up alternating copolymers consisting of similar styrene-type co-monomers, which has been inaccessible by conventional synthetic methods.     

Stereocontrol in radical polymerization

The stereospecific radical polymerization of vinyl esters, methacrylates, and alpha-substituted acrylates was studied. Fluoroalcohols, as a solvent, have remarkable effects on the stereoregularity of the radical polymerizations of vinyl acetate, vinyl pivalate, and vinyl benzoate, affording polymers rich in syndiotacticity, heterotacticity, and isotacticity, respectively. This method was successfully applied to the polymerization of methacrylates to give syndiotactic polymers. The steric repulsion between the entering monomer and the chain-end monomeric unit bound by the solvent through hydrogen bonding is important for the stereochemical control in these systems. Lewis acid catalysts, such as lanthanide trifluoromethanesulfonates and zinc salts, were also effective for the stereocontrol during the radical polymerization of methyl methacrylate, to reduce the syndiotacticity and alpha-(alkoxymethyl)acrylates to synthesize isotactic and syndiotactic polymers. Radical polymerization of the methacrylates bearing a bulky ester group, such as the triphenylmethyl methacrylate derivatives, gave highly isotactic polymers, as in the case of anionic polymerization. In addition, the control of one-handed helical conformation was attained in the radical polymerization of 1-phenyldibenzosuberyl methacrylate using chiral neomenthanethiol or cobalt(II) complexes as an additive.     

Synthesis and photopolymerization of novel multifunctional vinyl esters

Novel mono‐ and multifunctional vinyl ester monomers containing thioether groups were synthesized via an amine‐catalyzed Michael addition reaction between vinyl acrylate and multifunctional thiols. Using photo‐differential scanning calorimetry and real‐time Fourier transform infrared (RTIR) spectroscopy, the polymerization kinetics and oxygen inhibition of the homopolymerizations of the vinyl ester monomers were investigated. The effect of the vinyl ester and thioether group on acrylate/vinyl ester and thiol/vinyl ester copolymerizations was determined using real‐time IR spectroscopy to monitor polymerization rates of acrylate, vinyl, and thiol groups simultaneously. Polymerization of the vinyl esters used was found to be relatively insensitive to oxygen inhibition. We propose that the thioether group is responsible for reducing oxygen inhibition by a series of chain transfer/oxygen‐scavenging reactions. In polymerization of a acrylate/vinyl ester mixture both in nitrogen and in air, the vinyl ester monomer significantly enhances the polymerization rates and the conversion of the acrylate double bonds via plasticization of the crosslinked matrix and reduction of inhibition by oxygen. Ultimately, the vinyl ester monomer is incorporated into the polymer network. Thiol/vinyl ester free‐radical copolymerization is much faster than either thiol/allylether copolymerization or vinyl ester homopolymerization. The electron‐rich vinyl ester double bonds ensure rapid copolymerization with thiol. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4424–4436, 2004     

Novel Reactive Polymers Containing Hemiacetal Ester and Vinyl Moieties: Synthesis and Selective Polymerization of 1‐Methoxyallyl Methacrylate Derived from Methacrylic Acid and Methoxyallene

A novel functional monomer, 1‐methoxyallyl methacrylate (MOAMA), was prepared and its polymerization behavior was investigated. The radical polymerization of MOAMA led to a polymeric network due to the participation of the allyl group in the reaction. Contrarily, anionic polymerization proceeded in a living fashion to yield linear poly(MOAMA) without gelation. Since both the network‐type and linear polymers possess hemiacetal ester and vinyl moieties, the two‐fold polymerization behavior of MOAMA represents a new pathway towards reactive polymers.     

Synthesis of substituted polymethylenes by radical polymerization of alkyl N,N-dialkylfumaramates and maleamates: Relative reactivity of the isomers

Bulk polymerization of alkyl N,N-dialkylfumaramates (FAE) and maleamates (MAE) was performed in the presence of a radical initiator. It has been found that FAE is more reactive than MAE when the reactivity of the two geometrical isomers was compared for their homo- and copolymerizations. From investigation on the effect of ester and N-substituents of these monomers, it has been found that the isopropyl ester shows a higher reactivity than the methyl ester and that N-ethyl and n-butyl substitution gives polymers with high molecular weight of more than several thousands. The resulting substituted polymethylenes from FAE and MAE were characterized and compared with each other. The isomerization of MAE to FAE with morpholine as an isomerization catalyst and monomer-isomerization radical polymerization were also investigated.     

Termination rate constant in radical polymerization

On the basis of the assumption that the primary radical immerses into a polymeric radical, the rate constant of primary radical termination was derived. By applying and developing further the same treatment, the rate constant of chain termination was derived. This rate constant was experimentally confirmed. It was found that the rate constant of chain termination for the polymerization of some methacrylates depends on the distance of translation of radical chain end per collision, solvent viscosity, and the Taft polar constant for ester group.     

Thermogravimetric analysis of poly(alkyl methacrylates) and poly(methylmethacrylate-g-dimethyl siloxane) graft copolymers

The thermal stabilities of various poly(alkyl methacrylate) homopolymers and poly(methyl methacrylate-g-dimethyl siloxane) (PMMA-g-PSX) graft copolymers have been determined by thermogravimetric analysis (TGA). As expected, the thermal stabilities of poly(alkyl methacrylates) were a function of the ester alkyl group, and polymerization mechanism. In particular, thermally labile linkages, which result from termination during free radical or nonliving polymerization mechanisms, decrease the ultimate thermal stabilities of the polymers. However, graft copolymers, which were prepared by the macromonomer technique with free radical initiators, exhibited enhanced thermal stability compared to homopolymer controls. A more complex free radical polymerization mechanism for the macromonomer modified polymerization may account for this result. © 1994 John Wiley & Sons, Inc.     

ATRP法合成聚去氢枞酸丙烯酸乙二醇酯的研究

本研究从歧化松香中提取的去氢枞酸(DHA)出发,经酰氯化后与丙烯酸(2-羟基)乙酯反应,合成了去氢枞酸丙烯酸乙二醇酯(DHAAGE);并以此为单体,2-溴-异丁酸乙酯(EBr-iB)为引发剂,CuBr/2,2'-联吡啶(2,2'-bipyridine)为催化体系,在90 oC下,利用原子转移聚合(ATRP)法制备了聚去氢枞酸丙烯酸乙二醇酯(PDHAAGE).利用FT-IR、1H-NMR和GPC对所制备的单体和聚合物进行了表征,同时考察了单体转化率随聚合反应时间的变化.结果表明,聚合反应动力学曲线呈良好线性关系,表观聚合速率常数kp′为3.6 ×10-7 s-1;所得聚合物的分子量分布很窄.     

Construction of a polymer skeleton that is cut in half by ionizing radiation

Polystyrene with a benzyl ester of carboxylic acid at the center of a polymer skeleton was synthesized by living radical polymerization. The initiator used had two functional groups for 2,2,6,6‐tetramethylpiperidinoxyl (TEMPO)‐mediated living radical polymerization on the benzyl and the carboxylic sides of the benzyl ester. Introduction of the benzyl ester changed the polystyrene from a crosslink type to a scission type polymer on γ‐irradiation. Irradiation of the polymer resulted in a binary change of the molecular weight because of the dissociative capture of secondary electrons by the benzyl ester, as: The binary change of the molecular weight suggests that the polymer can be used as a new type of radiation resist with high sensitivity and spatial resolution to ionizing and high resistivity to plasma etching. The number of scissions per 100 eV radiation energy absorbed was 0.29, which was about one fourth of the yield of secondary electrons. The low efficiency was because of the recombination of polymer radicals generated by the dissociative electron attachment. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1068–1075, 2005     

Synthesis and polymerization of N-(ethylene)-phthalimidyl acrylate

N-(Ethylene)phthalimidyl acrylate was synthesized starting from phthalimide or phthalic anhydride using two different routes. Free radical or anionic polymerization of the ester resulted in low-molecular-weight polymers.     

一类新的刚性链侧链型液晶高分子的合成

以自由基聚合方法，合成了一系列含有三个苯环通过酯键相联的液晶性单体及其聚合物．在这类新的液晶高分子中，刚性液晶基元不通过柔性间隔基而直接竖挂在聚甲基丙烯酸酯大分子主链上．这些高分子有很高的玻璃化转变温度，表明其分子链刚性较大，因而代表了一类新的刚性链侧链型液晶高分子．它们的液晶行为用ＤＳＣ、偏光显微镜和Ｘ－光衍射进行了表征．发现所有单体和聚合物均为向列型热致性液晶．     

Studies on the Self-condensing Vinyl Living Radical Polymerization of a Novel Acrylate Inimer

IntroductionDendrimers represent a class of macro-molecules with perfectly and regularly branchedstructures.However,the synthesis ofdendrimers isnot trivial and requires multistep synthesis,theircommercial development has been limited only to afew structures[1— 3 ] . Hyperbranched macro-molecules,which posses less perfectly branchedstructures,have some similar properties to those ofdendrimers,but they can be prepared in a singlestep and one- pot reaction,so many macromolecularresearchershavef…     

Photoinduced ionic polymerization. II. Cationic polymerization of α-methylstyrene in the presence of tetracyanobenzene

The dependence of the rate of polymerization on light intensity and the stereoregularity of the polymer was studied to elucidate the propagation and termination mechanisms of the photoinduced cationic polymerization of α-methylstyrene in the presence of tetracyanobenzene in methylene chloride. The rate of polymerization was proportional to the light intensity. The polymer is highly syndiotactic, and the stereoregularity is similar to that of polymers obtained by radiation-induced cationic polymerization. The initiation mechanism was also studied by electron spin resonance, by which the anion radical of tetracyanobenzene formed from a photoexcited complex between α-methylstyrene and tetracyanobenzene was observed. The cation radical of α-methylstyrene, counterpart of the anion radical, is believed to initiate the polymerization.     

An Alkenyl Boronate as a Monomer for Radical Polymerizations: Boron as a Guide for Chain Growth and as a Replaceable Side Chain for Post‐Polymerization Transformation

The ability of isopropenyl boronate pinacol ester to serve as a monomer in radical polymerizations was established and exploited for the synthesis of polymers that are difficult to access using other polymerization techniques. Although the monomer exhibits an α‐methyl‐substituted unconjugated structure, which is usually unfavorable for radical propagation, both free and controlled radical polymerizations smoothly afford the corresponding polymers. A density‐functional‐theory‐based investigation revealed that the boron atom moderately stabilizes the radical species, which leads to the suppression of the degradative chain transfer to the α‐methyl groups, and thus guides the reaction towards the radical polymerization. The boronyl pendants, which are directly attached to the polymer backbone, can be replaced with ‐OH or ‐NH₂ to yield poly(α‐methyl vinyl amine) or poly(α‐methyl vinyl alcohol), which has been inaccessible by conventional synthetic methods.