Recent Progress in the Preparation of Functional Methacrylate Polymers

Application of anionic polymerization and group transfer polymerization to the synthesis of methacrylate polymers with one or two functional endgroups and with functional groups in the side chain is described. Success in the preparation of end-functional polymers depends largely on the absence of chain transfer and chain termination reactions. The higher stability of living chains in group transfer polymerization at temperatures as high as 100°C makes it the preferred route to functional polymers.     

Functional aramids: Aromatic polyamides with reactive azido and amino groups in the pendant structure

The structure of the high‐performance aromatic polyamides, also known as aramids, was modified to render functional polymers by the introduction of primary amine and azide functional groups in the main polymer chain. These materials were prepared as parent polymers for future use in the simple and inexpensive preparation of other high‐performance materials by the chemical derivatization of the primary amine and azide groups using their well‐known and broad reactivity. The potential of the parent aramids was exemplified with the preparation of four novel functional aramids containing the fluorescent dansyl group, the anion and cation receptors urea and triazole with free primary alcohol functional groups, and the iminophosphorane ligand for forthcoming synthetic processes. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1469–1477     

胆甾基功能高分子研究进展

简要评述了胆甾基功能高分子的分子设计与合成研究进展,着重对侧基型高分子胆甾进行论述.     

Multifunctional polymeric materials for biomedical applications

The work performed by our research group during the last few years in the area of bioerodible-biodegradable polymers as designed to the formulation of systems for the controlled delivery of drugs and as specific sorbents of uraemic toxins is broadly reviewed. In particular, attention has been focused on the strategies adopted in the preparation of functional polymers containing hydroxyl or carboxyl groups, suitable to establish specific bonding and non-bonding interactions with conventional and proteic drugs.     

Hyperbranched polymers 10 years after

It has been about 10 years since the first intentional preparation of hyperbranched polymer was disclosed. Hyperbranched polymers, as well as dendrimers, may find utilities in the areas where the structural uniqueness of these polymers gives merit. There has been much progress in the structural understanding and the methods of synthesis of these polymers. However, functional understanding and utility of these polymers are still in infancy. Better understanding on physical properties of these polymers, such as solubility and miscibility of these polymers in solvents or with polymers, and functional group dependency to the thermal relaxation process are needed for further development of the subject. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A: Polym. Chem. 36: 1685–1698, 1998     

Synthesis of Functional Polymers by Post‐Polymerization Modification

Post‐polymerization modification is based on the direct polymerization or copolymerization of monomers bearing chemoselective handles that are inert towards the polymerization conditions but can be quantitatively converted in a subsequent step into a broad range of other functional groups. The success of this method is based on the excellent conversions achievable under mild conditions, the excellent functional‐group tolerance, and the orthogonality of the post‐polymerization modification reactions. This Review surveys different classes of reactive polymer precursors bearing chemoselective handles and discusses issues related to the preparation of these reactive polymers by direct polymerization of appropriately functionalized monomers as well as the post‐polymerization modification of these precursors into functional polymers.     

A REVIEW ON THERMAL AND RADIATION-INDUCED POLYMERIZATION OF N-TERT-BUTYLACRYLAMIDE AND ITS VARIOUS COMPLEXES IN THE LIQUID AND SOLID STATES

Abstract

The acrylamide family of monomers is a highly versatile group of chemical intermediates. The major use of these monomers is the preparation of polymers and copolymers having a highly polar functional group attached to the backbone.     

The effectively specific recognition of bovine serum albumin imprinted silica nanoparticles by utilizing a macromolecularly functional monomer to stabilize and imprint template

Structural stability of the template is one of the most important considerations during the preparation of protein imprinting technology. To address this limitation, we propose a novel and versatile strategy of utilizing macromolecularly functional monomers to imprint biomacromolecules. Results from circular dichroism and synchronous fluorescence experiments reflect the macromolecularly functional monomers tendency to interact with the protein surface instead of permeating it and destroying the hydrogen bonds that maintain the protein’s structural stability, therefore stabilizing the template protein structure during the preparation of imprinted polymers. The imprinted polymers composed of macromolecularly functional monomers or their equivalent micromolecularly functional monomers over silica nanoparticles were characterized and carried out in batch rebinding test and competitive adsorption experiments. In batch rebinding test, the imprinted particles prepared with macromolecularly functional monomers exhibited an imprinting factor of 5.8 compared to those prepared by micromolecularly functional monomers with the imprinting factor of 3.4. The selective and competitive adsorption experiments also demonstrated the imprinted particles made by macromolecularly functional monomers possessed much better selectivity and specific recognition ability for template protein. Therefore, using macromolecularly functional monomers to imprint may overcome the mutability of biomacromolecule typically observed during the preparation of imprinted polymers, and thus promote the further development of imprinting technology.     

Photoinitiating systems and their use in polymer synthesis

This paper on recent developments in the use of photoinitiating systems in polymer synthesis concentrates on: (i) the possiblity of controlled//living polymerization by photopolymerization, (ii) major photoinitiating systems for both cationic and radical polymerization and (iii) preparation of block copolymers and functional polymers by photoinduced processes. Much progress has been made in the past ten years in preparation of block copolymers by photoinduced reactions of either chromophoric groups incorporated into polymers or low‐molecular‐weight compounds with suitable functional groups present in polymer chains.     

A versatile approach for the preparation of end‐functional polymers and block copolymers by stable radical exchange reactions

A versatile strategy for the preparation of end‐functional polymers and block copolymers by radical exchange reactions is described. For this purpose, first polystyrene with 2,2,6,6‐tetramethylpiperidine‐1‐oxyl end group (PS‐TEMPO) is prepared by nitroxide‐mediated radical polymerization (NMRP). In the subsequent step, these polymers are heated to 130 °C in the presence of independently prepared TEMPO derivatives bearing hydroxyl, azide and carboxylic acid functionalities, and polymers such as poly(ethylene glycol) (TEMPO‐PEG) and poly(ε‐caprolactone) (TEMPO‐PCL). Due to the simultaneous radical generation and reversible termination of the polymer radical, TEMPO moiety on polystyrene is replaced to form the corresponding end‐functional polymers and block copolymers. The intermediates and final polymers are characterized by ¹H NMR, UV, IR, and GPC measurements. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2387–2395     

Postpolymerization modification of poly(pentafluorophenyl methacrylate): Synthesis of a diverse water‐soluble polymer library

This article explores the feasibility of poly(pentafluorophenyl methacrylate) (PPFMA) prepared by reversible addition fragmentation chain transfer (RAFT) polymerization as a platform for the preparation of diverse libraries of functional polymers via postpolymerization modification with primary amines. Experiments with a broad range of functional amines and PPFMA precursors of different molecular weights indicated that the postpolymerization modification reaction proceeds with good to excellent conversion for a diverse variety of functional amines and is essentially independent of the PPFMA precursor molecular weight. The RAFT end group, which was well preserved throughout the polymerization, is cleaved during postpolymerization modification to generate a thiol end group that provides possibilities for further orthogonal chain‐end modification reactions. The degree of postpolymerization modification can be controlled by varying the relative amount of primary amine that is used and random polymethacrylamide copolymers can be prepared via a one‐pot/two‐step sequential addition procedure. Cytotoxicity experiments revealed that the postpolymerization modification strategy does not lead to any additional toxicity compared with the corresponding polymer obtained via direct polymerization, which makes this approach also of interest for the synthesis of biologically active polymers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4332–4345, 2009     

功能化的无机复合体系

通过化学物理相互作用将不同组分进行复合可以形成各种各样的复合体系。如果体系中的组分均为无机物或以无机物为主则相应的复合体系称为无机复合体系。通过对组成、结构及形貌等进行设计与调控,可以赋予无机复合体系独特的性质和功能。常见的无机复合体系主要包括主-客体复合物、配位聚合物以及各种纳米复合体系等。这些无机复合体系的功能化对新材料及新能源的开发和利用具有重要意义。本文综述了各种新型无机复合体系的最新研究进展,总结了本课题组在无机复合体系及其功能化的设计与开发方面取得的最新结果,并对功能化的无机复合体系作为新型材料的应用进行了展望。     

酞菁类聚合物功能材料研究进展

本文概述酞菁类聚合物作为功能材料的研究进展，详细讨论了酞菁类聚合物的分类、制备方法、性能研究以及应用领域。     

End group transformations of RAFT‐generated polymers with bismaleimides: Functional telechelics and modular block copolymers

End group activation of polymers prepared by reversible addition‐fragmentation chain transfer (RAFT) polymerization was accomplished by conversion of thiocarbonylthio end groups to thiols and subsequent reaction with excess of a bismaleimide. Poly(N‐isopropylacrylamide) (PNIPAM) was prepared by RAFT, and subsequent aminolysis led to sulfhydryl‐terminated polymers that reacted with an excess of 1,8‐bismaleimidodiethyleneglycol to yield maleimido‐terminated macromolecules. The maleimido end groups allowed near‐quantitative coupling with model low molecular weight thiols or dienes by Michael addition or Diels‐Alder reactions, respectively. Reaction of maleimide‐activated PNIPAM with another thiol‐terminated polymer proved an efficient means of preparing block copolymers by a modular coupling approach. Successful end group functionalization of the well‐defined polymers was confirmed by combination of UV–vis, FTIR, and NMR spectroscopy and gel permeation chromatography. The general strategy proved to be versatile for the preparation of functional telechelics and modular block copolymers from RAFT‐generated (co)polymers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5093–5100, 2008     

Solvent effects in the preparation of molecularly imprinted polymers for melatonin using N-propionyl-5-methoxytryptamine as the pseudo template

To clarify the role of diluents in the preparation of molecularly imprinted polymers utilizing only hydrogen bonding, we investigated the effects of diluents by using different solvents. Melatonin (N-acetyl-5-methoxytryptamine), an amide bond and indole ring-containing hormone was chosen as the target molecule. N-Propionyl-5-methoxytryptamine was used as the pseudo template, methacrylic acid as the functional monomer, and solvents were used as diluents. Interactions between the template, the functional monomer, melatonin, and the solvents, were observed by ¹H NMR spectroscopy. The polymers were evaluated by high-performance liquid chromatography. The results suggest the hydrogen bonding-acceptor capacity of the solvent is the most important factor in the preparation of molecularly imprinted polymers for hydrogen bonding-donating molecules. Hydrogen bonding between the template, the functional monomer, and solvent can be estimated from the chemical shifts in ¹H NMR spectra of those molecules in the solvent.     

Optimization of polymerization parameters for the sorption of oseltamivir onto molecularly imprinted polymers

Molecularly imprinted polymers (MIPs) are tailor-made polymers with high selectivity for a given analyte, or group of structurally related compounds. The influence of the process parameters (the moles of functional monomer and cross-linker, the selection of functional monomer and solvent) on the preparation of oseltamivir (OS)-imprinted polymers was investigated. A mathematical method for uniform design to optimize these selected parameters and to increase the MIP selectivity for template molecules was applied. The optimal conditions to synthesize MIP were 0.69 mmol 30% acrylamide (AA) + 70% 4-Vinylpyridine (4-VP) and 5.0 mmol ethylene glycol dimethacrylate (EGDMA) copolymerized in 5 ml toluene in the presence of 0.1 mmol OS. MIP showed high affinity and selectivity for separation of the template molecule from other compounds. In the present study, we have established an effective LC-MS/MS method to identify and quantify OS with good sensitivity, accuracy and precision.     

新型含短氟碳链侧基的氧杂环丁烷单体的合成与表征

应用含短氟碳链的功能性聚合物可以避免因使用含长氟碳链化合物给环境带来的潜在危害. 以全氟丁基磺酰氟为原料, 通过磺酰化和N-烷基化合成带有端羟基的中间体4, 再通过2,2-二溴甲基氧杂环丁烷(2)与4的Williamson醚化反应合成了含全氟丁基磺酰胺侧基的新型氧杂环丁烷衍生物1a和1b. 以5,5-二甲基海因为原料, 采用类似的合成路线, 合成了带海因侧基的新型氧杂环丁烷单体6.     

阴离子印迹聚合物的制备及其应用研究进展

离子印迹聚合物是利用印迹技术对模板离子进行印迹、聚合进而得到能够选择性吸附该离子的一种特殊聚合物.目前的报道大多是阳离子印迹聚合物,因为阴离子模板结构更复杂多样且电荷尺寸比更小,致使阴离子印迹聚合物的发展相对滞后.为能更有效地指导阴离子印迹聚合物的制备,本文概述了阴离子印迹聚合物的发展现状,介绍了与不同阴离子有相互作用...     

Ceiling Degree of Polymerization for Brush Polymers Prepared via ROMP of Poly(tert-Butyl Acrylate) Macromonomers

Controlled preparation of brush polymers is important in the design of functional materials. In this study, poly(tert-butyl acrylate) macromonomers functionalized with norbornenyl end group(NB-PtBA) were synthesized via atom transfer radical polymerization in three different molecular weights, 2000(NB-PtBA-2k), 3000(NB-PtBA-3k), and 8000(NB-PtBA-8k). Additionally, brush polymers with PtBA as side chains were synthesized via ring-opening metathesis polymerization(ROMP). Kinetic studies on ROMP of NB-PtBA showed that there was a ceiling degree of polymerization(CDP) for the brush polymers, beyond which the polymerization of NB-PtBA was out of control. For brush polymers of P[NB-PtBA-2k] and P[NB-PtBA-3k], CDPs were estimated to be ca. 400, but the value of P[NB-PtBA-8k] was ca. 100. Therefore, the controlled ROMP of brush polymers was critical at the CDP limit with increased macromonomer molecular weight.     

Modular In Situ Functionalization Strategy: Multicomponent Polymerization by Palladium/Norbornene Cooperative Catalysis

Herein, we report a cooperatively palladium/norbornene‐catalyzed polymerization, which simplifies the synthesis of functional aromatic polymers, including conjugated polymers. Specifically, an A₂B₂C‐type multicomponent polymerization that is based on an ortho amination/ipso alkynylation reaction was developed for the preparation of various amine‐functionalized arylacetylene‐containing polymers. Within a single catalytic cycle, the amine side chains are site‐selectively installed in situ by C?H activation during the polymerization process, which represents a major difference from conventional cross‐coupling polymerizations. This “in situ functionalization” strategy enables the modular incorporation of functional side chains starting from simple monomers, thereby conveniently affording a diverse range of functional polymers.