Synthesis of Polymers by Using Divalent Metal Salts of Mono(hydroxyethyl)phthalate: Metal-Containing Unsaturated Polyesters

Syntheses of metal-containing unsaturated polyesters based on divalent metal salts (I) of mono (hydroxyethyl)phthalate were investigated by the polycondensation reactions of I-glycols with maleic anhydride (MA)-phthalic anhydride (PA). Among various combinations of components, the systems of MA-PA-diethylene glycol (DEG)-Mg salt, and MA-PA-ethylene glycol (EG)-propylene glycol (PG)-Mg salt gave polyesters soluble in styrene. Viscosities of styrene solutions of the polyesters obtained showed a tendency to increase with increase in metal content in the polyester. The styrene solutions could be cured. The cured polyester resins were evaluated for physical properties. Generally, the polyesters of MA-PA-EG-PG-Mg salt have good physical properties. Further, resistance to chemical attack and boiling water, and thermal behavior are also discussed.     

Synthesis of Polymers by Using Divalent Metal Salts of Mono(hydroxyethyl)phthalate: Metal-Containing Unsaturated Polyesters with Pendent Methacrylate Groups

Syntheses of novel metal-containing unsaturated polyesters having pendent methacrylate groups obtained by use of divalent metal salts of mono(hydroxyethyl)phthalate-maleic anhydride (MA)-glycidyl methacrylate (GMA) reactions were investigated. The yields were generally high. The metal-containing polyesters obtained were slightly yellow-brown solids, and the molecular weights ranged from 1546 to 2174, depending on the mole ratio of feed. Among them, the polyesters obtained at a feed mole ratio of metal salt:MA:GMA of 1:8:8 were miscible with methyl methacrylate (MMA), giving homogeneous solutions suitable for copolymerization, and the polyesters could be easily cross-linked with MMA to give cured resins. The metal-containing cured polyester resins showed excellent physical properties. Resistance of the resins to chemical attack and boiling water and thermal behavior are also discussed.     

Water-Containing Cured Resin from Inverted Emulsion of Unsaturated Polyester Based on Divalent Metal Salt of Mono(hydroxyethyl)phthalate

Inverted emulsion, i.e., water-in-oil (W/O) type emulsion, was prepared from styrene solution of unsaturated polyester obtained from Mg salt of mono(hydroxyethyl)phthalate, ethylene glycol (EG), maleic anhydride (MA), phthalic anhydride (PA), and propylene oxide (PO). The inverted emulsion was much more stable than that of blank polyester obtained from EG, MA, PA, and PO, and further than the usual inverted emulsion prepared by treating styrene solution of commercial unsaturated polyester with triethanolamine. By polymerization, the inverted emulsion was transformed to a white solid which was dry to the touch. The water-containing cured resin obtained showed considerably higher physical and other properties than those of commercial unsaturated polyester.     

Fluoromethylene Transfer from Diarylfluoromethylsulfonium Salts: Synthesis of Fluorinated Epoxides

Diarylfluoromethyl sulfonium salts are efficient fluoromethylene transfer reagents equivalent to fluorocarbene, which is difficult to access. This was demonstrated by the development of a monofluorinated Johnson–Corey–Chaykovsky reaction with ketones and aldehydes, delivering uncommon 2-unsubstituted fluoroepoxides. This is the first evidence for the feasibility of sulfur fluoromethylylide and its action as a reaction intermediate.     

Separation of Selected Transition Metal Ions and Divalent Metal Ions by HPLC Using UV-VIS Detection

Abstract

The use of ethylenediaminetetraacetic acid, disodium salt, (pH 3-5) has been investigated as an eluant for the separation and detection of nanogram levels of selected divalent and trivalent metal ions. The effect of pH and eluant concentration upon the retention times and resolution of the system are given and the ability to alter the eluant characteristics to optimize the chromatographic results in different situations will be discussed. The method is less complicated than the method frequently used for transition metal ion determinations which uses a post-column derivitization reagent. This method is applicable to a wider range of metal ions and provides detection limits which are generally within two orders of magnitude of the post-column derivitization method.     

Solvent Role in the Synthesis of Organometallic and Metal-Containing Compounds by Direct Oxidation of a Metal

Solubility of certain magnesium, zinc, and cadmium halides in a number of organic substances was determined. A maximum in the dependence of the rate of metal oxidation with halogen-containing compounds on the donor number of the solvent does not correlate with the solubility of the corresponding salts in these solvents.     

Transition Metal Halide Salts of 1,3-bis(4-Pyridyl)propane: Synthesis and Structural Characterization

The resulting salts of (H₂bpp)MX₄ · n H₂O (M = Zn, X = Cl, n = 1, 1; M = Cd, X = Br, n = 0, 2; M = Hg, X = Cl, n = 1, 3; M = Cu, X = Cl, n = 0, 4; M = Cu, X = Br, n = 1, 5; M = Pt, X = Cl, n = 1, 6) were crystallized from the reaction mixture prepared by adding MX₂ to the HX solution of 1,3-bis(4-pyridyl)propane (bpp), while the salt of colorless (H₂bpp)SnCl₆, 7, was crystallized from the reaction mixture prepared by adding SnCl₂ to the HCl solution of bpp. Their structures have been determined by X-ray crystallography. All the compounds show supramolecular structures in the solid state by intermolecular hydrogen bondings and aromatic – interactions. The H₂bpp²⁺ cations in these metal salts adopt the gauche–gauche and anti–anti conformations with different dihedral angles for the two pyridyl rings.     

Reactive Conjugated Polymers: Synthesis,Modification, and Electrochemical Properties of Polypentafluorophenylacetylene (Co)Polymers

(Co)Polymers containing pentafluorophenylacetylene (F₅PA) have been prepared for the first time mediated by [Rh(nbd)Cl]₂/NEt₃ to give materials with properties typical of poly(phenylacetylene)s prepared with this catalyst/co‐catalyst combination. It is demonstrated that the F₅PA repeat units in these new (co)polymers serve as convenient reactive species for post‐polymerization modification with thiols via para‐fluoro aromatic nucleophilic substitution reactions to give an entirely new family of novel thioether‐functional polyene materials accompanied by absorption maxima shifts of up to 130 nm. Finally, the electrochemical properties of these new fluorinated polyene materials are briefly examined and the distinct difference in behavior of the F₅PA homopolymer versus polyphenylacetylene, copolymers, and functional derivatives is highlighted.

     

硫醚双酐聚酰胺酸的合成及其热稳定性

合成了硫醚二酐和4-硝基-4'-[N,N-二(2-氨乙基)氨基]偶氮苯(二胺单体)及对应的硫醚聚酰胺酸,并对其结构进行表征.由于该发色团分子的一端有可以进一步聚合的氨基,它与硫醚酐所形成的聚酰胺酸在普通有机溶剂中具有良好的可溶性,NLO发色团和聚酰亚胺骨架的分解温度t_d分别为362℃和491℃,显现出了特殊的热稳定性.目前,这些聚合物在高敏感非线性光学材料方面显示着广泛的应用前景.     

Arylidene Polymers. IX. Synthesis,Characterization, and Morphology of New Polyesters of Diarylidenecycloalkanones Containing Thianthrene Units

New polyesters containing thianthrene tetraoxide were synthesized by the interaction of 2,7-dichloroformylthianthrene-5,5′,10, 10′-tetraoxide with 2,5-bis(p-hydroxybenzylidene)cyclopentanone, 2,5-divanillylidenecyclopentanone, 2,6-bis(p-hydroxybenzyiidene)-cyclohexanone, 2,6-divanillylidenecyclohexanone, and 2,7-bis(p-hydroxybenzylidene)cycloheptanone by using the interfacial polycondensation technique. The resulting polyesters were characterized by elemental and spectral analyses. All the synthesized polymers readily dissolved at room temperature in dimethylsulfoxide. The thermal properties of the polymers were evaluated and correlated to their structural units by TGA and DSC measurements. X-ray analysis of polymers showed that all the polyesters are amorphous. Moreover, the morphology of a new high performance polyester, poly[oxycarbonyl-2,7-thianthrene-5,5′,10,10′-tetraox-idecarbonzeoxyl(2-methoxy-p-phenylene)methylidyne(2-oxo-1,3-cyclohexanediylidenemethylidyne)methylidene(3-methoxy-p-phenylene)], has been investigated by scanning electron microscopy.     

一顺丁烯二酸异丙酯酰氧基二异丙氧基镝的合成和聚合

用三异丙氧基镝与顺丁烯二酸酐反应合成－顺丁烯二酸异丙酯酰氧基二异丙氧基镝,ＤＭ在偶氮二异丁腈引发下通过溶液聚合制得含Ｄｙ聚合物。     

苯并咪唑衍生配体锌-铕(或铽)异金属双核配合物的合成、结构与光学性质

合成了四个锌-铕(或铽)异金属双核配合物[ZnLnL¹(NO₃)₃Py] (Ln=Eu (1), Tb (2); HL¹=1-H-2-(2-羟基-3-甲氧基苯基)苯并咪唑; Py=吡啶)和[ZnLnL²(NO₃)₃Py] (Ln=Eu (3), Tb (4); HL²=1-H-2-(2-羟基-3-甲氧基-5-溴苯基)苯并咪唑; Py=吡啶), 其中1、2、3是单晶态, 化合物4则为多晶样品; 通过单晶X射线衍射、元素分析、傅里叶变换红外光谱和电喷雾质谱对化合物进行了表征. 化合物的紫外-可见吸收光谱、荧光激发和发射光谱表明配体的激发态能量有效传递到配合物中的镧系金属离子中, 含有铽(III)离子的配合物发射出其特征发射光谱, 而含有铕(III)离子的配合物由于其它去活方式, 没有辐射出铕(III)离子的特征发射光谱.     

Research of the Reaction of Pyromellitic Dianhydride with [3-(Aminomethyl)bicyclo[2.2.1]hept-2-yl]anilines by Calorimetric Method

Russian Journal of General Chemistry - For the first time, a study of the reaction of pyromellitic dianhydride with [3-(aminomethyl)bicyclo[2.2.1]hept-2-yl]anilines by the calorimetric method was...     

Synthesis and performance of a Mono (dodecafluoroheptyl) acetate surfactant

A novel fluorinated surfactant, sodium 1?H, 1?H, 7H-dodecafluoro-1-heptyloxy acetate (DFHAS), was synthesized via a facile two-step synthetic procedure. The structure of product on each step was characterized by ^1?H NMR, ^19?F NMR, ¹³C NMR, FT-IR, and mass spectrum (MS). Ultraviolet absorption (UV) and ring measurements were performed to obtain detailed information of its surface properties. The results demonstrated that the novel surfactant possessed very low critical micelle concentration (CMC, 7.94?mM) and surface tension (20.01?mN/m). Furthermore, the surfactant had preferable thermal stability compared with other perfluorocarboxylates characterized by thermal gravimetric analysis (TGA). The practical application performance of DFHAS was finally validated through the emulsion polymerization of vinylidene fluoride (VDF) by means of its excellent emulsifying activities. It is expected that this versatile synthetic strategy may help fabricate satisfying green surfactant systems for the application in fields of emulsion polymerization, drug delivery and greases.GRAPHICAL ABSTRACT     

Stereoselective Synthesis of Alkenyl Alcohols Using Dissolving Metal (Ca,Na) Reduction

Use of the calcium-ethylenediamine and sodium-liquid ammonia reduction systems for the ring opening of dihydropyran derivatives was studied. (Z)-Alkenyl alcohols and (E)-alkenyl alcohols were stereoselectively synthesized respectively.     

Synthesis and Characterization of a Novel Phosphonate Metal Organic Framework Starting from Copper Salts

Abstract

Increased interest in the area of metal phosphonate inorganic–organic frameworks is exemplified with a high range of applications and a rich synthetic and structural chemistry of these compounds. The synthesis and potential applications of a novel metal phosphonate, namely Cu(II) phenylvinylphosphonate (PVP) is described in this paper. Syntheses were performed starting from a 1:1 molar ratio of a Cu(NO₃)₂·6H₂O or CuSO₄·5H₂O and 1-phenylvinylphosphonic acid under hydrothermal conditions at pH values ranging between 2.8 and 3.1. The influence of different counterion for the copper salt used as the Cu(II) source on the structure and crystallinity of the final product was studied. The obtained copper(II) phenylvinylphosphonate compounds were characterized by X-ray powder diffraction, FT-IR spectroscopy, scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and energy-dispersive X-ray spectrometry (EDAX). A possible crystal structure for the copper (II) phenylvinylphosphonate products is proposed using semiempirical approaches.