Hydrophilic magnetic polymer latexes. 1. Adsorption of magnetic iron oxide nanoparticles onto various cationic latexes

With a view to preparing monosized hydrophilic functional magnetic latex particles based on a two-step strategy using anionic iron oxide and cationic polymer latexes, the adsorption step was systematically investigated for a better control of the subsequent encapsulation step. The iron oxide nanoparticles were first obtained according to the classical precipitation method of ferric and ferrous chloride salt using a concentrated sodium hydroxide solution, whereas the polystyrene (PS), P(S/N-isopropylacrylamide (NIPAM)) core–shell and PNIPAM latexes were produced via emulsion and precipitation polymerizations, respectively. The polymer and inorganic colloids were then characterised. The adsorption of iron oxide nanoparticles onto the three types of polymer latexes via electrostatic interaction was studied as a function of iron oxide particle concentration, charge density and the cross-linking density of the hydrophilic layer. The maximum amounts of magnetic nanoparticles adsorbed onto the various latexes were found to increase in the following order: PS < P(S/NIPAM) < P(NIPAM). This significant difference is discussed by taking into account the charge distribution in the hydrogel layer and diffusion phenomena inside the cross-linked hydrophilic shell. Received: 28 December 1998 Accepted in revised form: 15 April 1999     

Adsorption studies of cationic starch onto quartz surface through an electrode-separated piezoelectric sensor

In the construction of an electrode-separated piezoelectric sensor (ESPS), the quartz surface is in direct contact with the liquid phase. The negatively charged quartz crystal surface can adsorb cationic starch. This adsorption process was in situ monitored from the frequency shift of the ESPS. It was shown that the adsorption of cationic starch onto the quartz surface is reversible with respect the dilution of the bulk phase. The adsorption behavior can be described by Langmuir model. The adsorption density and kinetics parameters were estimated from the frequency responses of the ESPS. The influence of pH and ionic strength on adsorption parameters was investigated. It was shown that the influence of pH on the adsorption rate was slight. With increasing ionic strength, the rate constants for adsorption and desorption increase, but the adsorption equilibrium constant and saturation adsorption density decrease. The adsorption equilibrium constant and adsorption density reach a maximum in buffer of pH 10.     

Monosized cationic nanoparticles prepared by emulsifer-free emulsion polymerization

Monosized poly(styrene/N-[3-(dimethylamino)propyl]methacrylamide/poly(ethylene glycol) ethyl ether methacrylate) [poly(St/PEG-EEM/DMAPM)] cationic nanoparticles were synthesized by emulsifier-free emulsion polymerization conducted in the presence of a cationic initiator, 2,2-azobis(2-methylpropionamidine) dihydrochloride (APDH or V-50). Particle sizes and surface charge densities were measured with a Zeta Sizer. The structure of the terpolymers was determined by Fourier transform IR and ¹H NMR spectroscopies. The amounts of the main monomer (St), cationic comonomer (DMAPM), stabilizer (PEG-EEM), and initiator (APDH), and the water-to-monomer phase ratio were all effective on both the average size and the surface charge of the nanoparicles. The average particle size was in the range 75–400 nm depending on the recipe applied; it decreased on increasing the amount of DMAP or PEG-EEM or the water-to-monomer phase ratio in the feed, while it increased with increasing St or APDH content. These nanoparticles were quite monodisperse with a polydispersity index of 1.008–1.14.     

Adsorption of chlorhexidine onto cellulosic fibers

Comparative investigations of adsorption properties of chlorhexidine (CHX) on two cellulose fibers, bleached cotton and viscose, were studied in order to obtain dry gauzes covered with known amount of this antiseptic. Adsorption isotherm results carried out at 293 and 323 K can be described by Langmuir isotherm model, nevertheless, at high concentration correlation is better to Freundlich isotherm. Electrokinetic potential evolution with CHX concentration, shows that initial negative zeta potential of cotton and viscose diminish its absolute value as the concentration of the treatment increases; both fibers present an isoelectric point at high concentration of CHX that is 0.3 mM for viscose and 0.8 mM for cotton. Electrostatic interactions between cationic groups of CHX and carboxylic acid groups of the fibers could explain adsorption at low concentration, but when it is higher than these values, possible hydrogen bonding between the amine groups of CHX and hydroxyl groups of cellulose could explain increasing adsorption when it is hindered by electrostatic repulsion as it is predicted by Freundlich model, that describes heterogeneous surface and multilayer adsorption. Adsorption kinetics isotherms reveal that the process is quick with t _1/2 values of 5.4 min for cotton and 2.8 min for viscose. Differences in adsorption behaviour between the two fibers could be attributed to structural differences as we have observed from estimation of CI index based on FTIR spectra. Values obtained 1.6 for viscose and 2.2 for cotton could explain that the amount of CHX adsorbed on viscose is higher than it is on cotton. Finally desorption experiments performed with 0.01 M of NaCl solution at room temperature and pH 6 reveals the possibility of therapeutical application of these fibers although further investigations must be done to optimize the process.     

Adsorption of a new amphoteric cellulosic copolymer onto bentonite

The adsorption of a new amphoteric cellulosic copolymer onto bentonite from aqueous solutions was studied at different salt concentrations and temperatures. The adsorption kinetics included a fast step and a slow step. The rate of initial rapid adsorption was reduced by the addition of NaCl. An increase in the concentration of added NaCl or increasing temperature decreased the amounts adsorbed. The influence of sodium dodecylsulfate and hexadecyl trimethylammonium chloride was also studied. Received: 14 December 1998 Accepted in revised form: 3 February 1999     

Adsorption of polyvinylalcohol onto Fuller''s earth surfaces

The adsorption of polyvinyl alcohol (PVA) onto Fuller's earth surfaces has been studied at fixed pH (4.8) and ionic strength of the medium. The adsorption isotherm obtained resembles with LIII type of isotherm, which indicates that multilayer formation of polymer chains begins after a certain time period when the monolayer formation is complete. The study of concentration effect and kinetics of adsorption process enabled in evaluating various adsorption and kinetic parameters such as the adsorption coefficient, modified Freundlich adsorption isotherm constants, distribution coefficient and rate constants for adsorption and desorption. A plausible mechanism of adsorption process was suggested according to which the adsorption was predominantly due to the formation of hydrogen bonds between the OH groups of PVA and aluminols, silanols and carboxylate ions of the organic matter of the Fuller's earth. The proposed mechanism was further confirmed by the IR spectral analysis of native and PVA-adsorbed clay. The adsorption was appreciably affected by the pH, presence of salts, organic solvents, solid to liquid ratio and temperature of the adsorption medium. The study of temperature effect was quantified by calculating various thermodynamic parameters such as Gibb's free energy, enthalpy and entropy. The results obtained in the study helped in formulating a mechanism of interaction between PVA and Fuller's earth surfaces.     

Adsorption of complexes formed by cationic starch and anionic surfactants on quartz studied by QCM-D

The adsorption of complexes of cationic starch, (CS) and a series of homologous sodium alkanoates on silica was studied with the quartz crystal microbalance with dissipation (QCM-D) instrument. The systems were chosen so as to represent CS/surfactant ratios below and above the critical association concentrations of the surfactants but below their critical micelle concentrations. It was found that

– surfactants did not adsorb on cationic polymers that were very tightly bound to the surface;

– surfactants did adsorb on polyelectrolytes forming layers with loops and tails extending into the solution, provided the concentration of surfactant was at least around the critical association concentration (cac) of the surfactant/polymer system;

– adsorption of surfactant was promoted by increasing the surfactant chain length and by adding simple electrolyte that weakened the electrostatic polymer/surface interaction and

– multilayers were formed when the surfactant concentration in solution was well above the cac; their formation was promoted by increasing hydrophobic interactions, e.g. by increasing the surfactant chain length.

Adsorption of cationic surfactants and subsequent adsolubilization of organic compounds onto cellulose fibers

Cationic surfactants with different hydrophobic chain length were adsorbed onto cellulose fibers in an aqueous medium. The adsorption isotherms exhibited three characteristic regions which were interpreted in terms of the mode of aggregation of the surfactant molecules at the solid–liquid interface. The hydrophobic layers were used as a reservoir to trap various slightly water soluble organic molecules. A quantitative study of these phenomena suggested typical partition behavior of the organic solutes between the aqueous phase and the surfactant layer. The surfactant chain length (from C12 to C18) was shown to play an important role in terms of the capacity to retain the organic solute and the capacity increased with the number of carbon atoms.     

Adsorption studies of polyethers Part II: adsorption onto hydrophilic surfaces

The adsorption of BAB-type triblock copolymers (B=poly(ethylene oxide); A=poly(propylene oxide)) from aqueous solution onto hydrophilic silica particles is described with particular reference to the role of the copolymer composition. The adsorbed amount and the layer thickness were determined by the standard depletion method and photon correlation spectroscopy, respectively. Snowtex-YL silica was used as the adsorbent. The results show an increase in the adsorbed amount with increasing molar masses of both PEO and PPO blocks. The adsorbed layer thickness is found to depend strongly on PEO block mass. Both these parameters (adsorbed amount and hydrodynamic layer thickness) show a maximum as a function of the mole fraction of the PPO block present in the copolymer. The conformation of the adsorbed layer is determined by the surface–copolymer interaction; principally by the interaction of the hydrophilic PEO block with the silica surface. A good qualitative agreement of the experimental results with theoretical predictions and self-consistent mean field calculations has been found.     

Adsorption of organic compounds onto polyelectrolyte immobilized-surfactant aggregates on cellulosic fibers

The adsorption of anionic surfactants with different hydrophobic chain lengths onto cellulose fibers pretreated with a cationic polyelectrolyte has been investigated. Five steps are involved in the adsorption process, which was ascribed to the formation of monolayer and bilayer surfactant aggregates. Electrostatic interaction between the residual surface charges followed by hydrophobic interaction among the alkyl chains are considered the main factors in the adsorption process. The adsorption of the anionic surfactant was found to greatly enhance the retention of organic compounds onto the polyelectrolyte-treated cellulose. The coadsorption phenomenon, which was dependent on the saturation level of the adsorbed surfactant, has been explained in terms of the accumulation of the organic solute on the hydrophobic core generated by the adsorbed layer.     

Investigation of interactions between some anionic dyes and cationic surfactants by conductometric method

The interactions of cationic surfactants with anionic dyes were studied by conductometric method. Benzyltrimethylammonium chloride (BTMACl), benzyltriethylammonium chloride (BTEACl) and benzyltributylammonium chloride (BTBACl) were used as cationic surfactants and indigo carmine (IC) and amaranth (Amr) were chosen as anionic dyes. The specific conductance of dye–surfactant mixtures was measured at 25, 35 and 45 °C. A decrease in measured specific conductance values of dye–surfactant mixture was caused by the formation of non-conducting or less-conducting dye–surfactant complex. The equilibrium constants, K₁, the standard free energy changes, ΔG₁°$\mathrm{\Delta }{G}_1°$, the standard enthalpy changes, ΔH₁°$\mathrm{\Delta }{H}_1°$ and the standard entropy changes, ΔS₁°$\mathrm{\Delta }{S}_1°$ for the first association step of dye–surfactant complex formation were calculated by a theoretical model. The results showed that the equilibrium constants and the negative standard free energy change values for all systems decreased as temperature increased. Also these values decreased for all systems studied with increasing alkyl chains of surfactants due to the steric effect. When the equilibrium constant values, K₁, for the first association step of IC–surfactant and Amr–surfactant systems with the same surfactant were compared, the values of K₁ for IC–surfactant system were higher than that of Amr–surfactant system.     

Adsorption of poly(N-isopropylacrylamide-co-4-vinylpyridine) onto core-shell poly(styrene-co-methylacrylic acid) microspheres

Adsorption of the thermoresponsive copolymer of poly(N-isopropylacrylamide-co-4-vinylpyridine) (PNIPAM-co-P4VP) onto the core-shell microspheres of poly(styrene-co-methylacrylic acid) (PS-co-PMAA) is studied. The core-shell PS-co-PMAA microspheres are synthesized by one-stage soap-free polymerization in water. The copolymer of PNIPAM-co-P4VP is synthesized by free radical polymerization of N-isopropylacrylamide and 4-vinylpyridine in the mixture of DMF and water using K₂S₂O₈ as initiator. Adsorption of PNIPAM-co-P4VP onto the core-shell PS-co-PMAA microspheres results in formation of the composite microspheres of PS/PMAA-P4VP/PNIPAM. The driven force to adsorb the copolymer of P4VP-co-PNIPAM onto the core-shell PS-co-PMAA microspheres is ascribed to hydrogen-bonding and electrostatic affinity between the P4VP and PMAA segments. The resultant composite microspheres of PS/PMAA-P4VP/PNIPAM with surface chains of PNIPAM are thermoresponsive in water and show a cloud-point temperature at about 33 °C.     

Synthesis of a novel antimicrobial-modified starch and its adsorption on cellulose fibers: part II––adsorption behaviors of cationic starch on cellulose fibers

The adsorption of guanidine polymer modified starches on cellulose fibers was investigated along with the systematic studies on various influencing factors including temperature, pH, ionic strength and charge density of the starches. The AFM results revealed the relationship between the adhesion force and adsorption capacity. The adsorption capacity is not necessarily proportional to the adhesion force. The conditions for achieving the maximum adsorption were: temperature, 40 °C; pH, 6; C_NaCl, 0 mM and charge density, 0.4 meq/g. The corresponding the normalized adhesion force is approximate 1 mN/m. In terms of the surface roughness determined by AFM, it has been proved that adsorbed starches of high charge density tend to form train structure, whereas those of low charge density tend to form tails and loops. Due the comb molecular structure, the adsorption capacity of the novel cationic starch reaches 124.3 mg/g, which is much greater than those reported previously.     

氧化铟改性聚丙烯酰胺复合材料吸附水中铅的研究

环境中铅污染将威胁到生命体安全,因此去除过量的铅显得尤为重要。采用一锅法制备了复合材料吸附剂氧化铟改性的聚丙烯酰胺,通过扫描电子显微镜、N_(2)吸附-脱附仪和热重分析仪对吸附剂进行了表征。结合火焰原子吸收光谱法,研究其对水中的铅吸附性能。优化了溶液pH值及振荡时间对铅吸附的影响,并运用动力学和热力学研究了复合材料对铅的吸附行为。实验结果表明:在初始浓度为10 mg/L,溶液pH值为6.0,振荡时间为100 min时,铅的最大吸附量为9.689 mg/g;吸附行为符合拟二级动力学方程和Freundlich方程;当T=293.15 K时,ΔG=-8.38 kJ/mol,ΔH=23.90 J/mol,证明了复合材料对铅的吸附是自发进行,并且是吸热过程;经过3次吸附—解吸实验,复合材料对铅的解吸率仍大于87%,说明吸附剂的再生性能良好。     

A novel approach for Apocynum venetum/cotton blended fabrics modification by cationic polymer nanoparticles

Apocynum venetum/cotton blended fabrics have been subjected to treat with cationic polymer nanoparticles followed by dyeing with Acid Red B,and then studied for their dyeing performance and morphology.The investigation on the effect of modification factors on the blended fabrics indicated that the 0.5 g/L nanoparticles concentration,60 min treating time,60 °C treating temperature and pH 6-8 are the optimum modification process to improve the dyeability of acid dye.In addition,the SEM images show that nanoparticles can be adsorbed on the surface of modified A.venetum or cotton fibers,and the two different fibers could have the same adsorption ability to Acid Red B.     

Semi-quantitative determination of cationic surfactants in aqueous solutions using gold nanoparticles as reporter probes

Concentrations of cationic surfactants in aqueous solutions have been estimated on the basis of changes in the color of gold nanoparticles, used as reporter probes. We have shown that the colors of gold nanoparticles with anionic protective groups on their surfaces shift from red to indigo/purple and then back to red in a range of cationic surfactant solutions in which concentrations vary from very low to above the theoretical CMCs. The color changes occur near the theoretical CMCs, presumably because the presence of surfactant micelles in the solution prevents the gold nanoparticles from aggregating. We have used gold nanoparticles as reporter probes to determine the concentrations of cationic surfactants in products such as hair conditioners, which often contain large amounts of alkyltrimethylammonium halides. Although this approach can only provide an estimate, it can be performed simply by addition of a given amount of gold nanoparticles to a series of diluted solutions, without the need for instruments or labor-intensive procedures. Figure Photographs of a series of diluted hair conditioner solutions with added gold nanoparticles

---

     

Adsorption and inactivation behavior of horseradish peroxidase on cellulosic fiber surfaces

The physical immobilization behavior of horseradish peroxidase (HRP) on cellulosic fiber surfaces was characterized using adsorption and inactivation isotherms measured by the depletion method followed by fitting of Langmuir’s and Freundlich’s models to the experimental data. The adsorption and inactivation behavior of simpler and relatively non-porous high and low crystalline cellulosic substrates (microcrystalline cellulose and regenerated cellulose) as well as more complex and porous cellulosic pulp fibers (bleached kraft softwood fibers) were investigated. The effect of the sorbent surface energy on HRP adsorption was demonstrated by increasing the hydrophobicity of the cellulosic fibers using an internal sizing agent. The influence of the fiber surface charge density on HRP adsorption was studied via modification of the cellulosic fibers using TEMPO (2,2,6,6-tetramethyl-1-piperidiniloxy radical)-mediated oxidation methods. Results showed that hydrophobic interactions had a much larger effect on HRP adsorption than electrostatic interactions. More hydrophobic fiber surfaces (lower polar surface energy) result in larger enzyme-fiber binding affinity constants and higher binding heterogeneity. It was also found that oxidation of the cellulosic fiber substrate reduces enzyme adsorption affinity but significantly increases the loading capacity per unit weight of the surface.     

Synthesis of cationic hyperbranched multiarm copolymer and its application in self-reducing and stabilizing gold nanoparticles

A novel hyperbranched multiarm copolymer of HBPO-star-PDEAEMA with a hydrophobic poly(3-ethyl-3-(hydroxymethyl) oxetane)(HBPO) core and many cationic poly(2-(N,N-diethylamino) ethyl methacrylate)(PDEAEMA) arms has been synthesized through an atom transfer radical polymerization(ATRP) method,and been applied to spontaneously reduce and stabilize gold nanoparticles(AuNPs) in water without other additional agents.The size of the nanoparticles could be effectively controlled at about 4 nm,and the nanoparticles ...     

Effects of surface structure on the molecular projection area. Adsorption of argon and nitrogen onto defective surfaces

This paper studies the effects of surface structure (defective surfaces) on the molecular projection area of argon and nitrogen at 77 K. The determination of the molecular projection area is based on choice of the surface area of the structure studied and the adsorption data obtained from the GCMC simulation. Two methods were used to determine the surface area: the flat surface area that are commonly used in the literature and the geometrical surface area. The molecular projection areas of argon and nitrogen at 77 K vary with pressure over the recommended range for BET plot (reduced pressures from 0.05 to 0.3) and also they varies with the percentage of defects on the surface. Additionally, it is seen that the geometrical surface area method gives molecular projection area of defective surfaces values that are in accordance with the experimental value reported in the literature.     

反应物的相间分配对吸附相技术制备纳米CuO过程的影响

以SiO2表面的富水吸附层为纳米反应器制备CuO纳米粒子. 不同水量下的吸附量测定、溶剂置换和反应后吸附对比实验结果表明, SiO2表面存在吸附水层, 并且该吸附水层是反应的主要场所. 根据吸附数据, 认为Cu2+在体系中具有三区域浓度分布特点, 体系中水浓度和氢氧化钠浓度的增加均会使得Cu2+向吸附层区域迁移. XRD分析结果表明, 反应温度的升高和NaOH浓度的增大有利于生成更小的CuO晶粒, 其中温度的升高使吸附层厚度减小, 限制了晶粒生长; NaOH浓度的增大则会增大层内溶质过饱和度, 导致晶核形成速率加快.