Preparation and Characterization of Head-to-Head Polymers. II. Head-to-Head Poly(methyl Acrylate)

Head-to-head poly(methyl acrylate) was prepared by esterification of the known alternating copolymer of ethylene and maleic anhydride. Some of the chemical,physical, and mechanical properties and the thermal degradation behavior of head-to-head poly(methyl acrylate) were studied and compared with those of head-to-tail poly(methyl acrylate). The T_g of the head-to-head polymer was higher than that of the head-to-tail polymer, but the solubilities of both types of polymers of comparable molecular weight were similar. Head-to-head poly(methyl acrylate) degraded thermally at approximately the same temperature and with a rate similar to head-to-tail poly(methyl acrylate). Unlike poly(methyl cinnamates) which cleanly degraded to monomers, poly(methyl acrylates), head-to-head and head-to-tail, degrade to very small molecules, such as CO₂, methanol, but also larger polymer fragments and char. Trace amounts of monomers (methyl acrylate) were also observed.     

Head-to-Head Polymers. XXII. Toward the Synthesis of Pure Head-to-Head Poly(methyl Methacrylate): Copolymerization of 2,3-Dimethylmaleic Anhydride and Ethylene

Copolymerization of 2,3-dimethylmaleic anhydride and ethylene has been accomplished under ethylene pressure (up to 1000 psi) with AIBN as the initiator. The copolymers were obtained at relatively low yield and only of moderate molecular weight. The incorporation of 2,3-dimethylmaleic anhydride units into the copolymer is about 20 mol% at 1000 psi and is 33 mol% at 500 psi of ethylene pressure. Unlike maleic anhydride-ethylene copolymers, alternating 2,3-dimethylmaleic qnhydride-ethylene copolymers of reasonable molecular weight have not yet been prepared. 2,3-Dimethylmaleic anhydride-ethylene copolymers could be hydrolyzed to the polymeric acids and quantitatively esterified to the polymeric methyl esters. Both anhydride and ester copolymers have been characterized spectroscopically and by their thermal behavior.     

Preparation and Characterization of Poly(methyl methacrylate)-functionalized Carboxyl Multi-wall Carbon Nanotubes

"An in situ polymerization process was used to prepare poly (methyl methacrylate) (PMMA)-functionalized carboxyl multi-walled carbon nanotubes using carboxylate carbon nanotubes and methyl methacrylate as reactants and benzoyl peroxide as an initiator agent. The functionalized multi-walled carbon nanotubes were characterized using transmission electron microscope, scanning electron microscope, nuclear magnetic resonance, Fourier transform infrared spectroscopy, thermogravimetric analysis and Raman. The results indicate that the PMMA chains are covalently linked with the surface of carboxylate carbon nanotubes. The surface morphology is controlled by the content of carboxylate carbon nanotubes in the reactants. The PMMA functionalized multi-walled carbon nanotubes are soluble in deuterated chloroform. The storage modulus and tanffi magnitude increase as the content of CCNTs increases up to 0.3%."     

Head-to-Head Polymers. XXVIII. Attempted Syntheses of Linear Head-to-Head Polyisobutylene

2,2,3,3-Tetramethyl-1,4-dibromobutane, when used as monomer for polymerization by Wurtz-type polycondensation, gave head-to-head polyisobutylene which is branched. Under similar conditions, 2, 5-dimethyl-2, 5-dibromohexane gave no polymer. Copolymerization of ethylene with tetramethylethylene under various conditions gave polyethylene of modest molecular weight with about 5% tetramethylene units in the polymer. 1,1,4, 4-Tetramethyl-1,3-butadiene (2,5-dimethylhexadiene-2,4) polymerized with BF₃ initiator to high molecular weight trans- 1,4-poly-(1,1,4,4-tetrarnethylbutadiene-1,3). The polymer could not be hydrogenated with soluble hydrogenation catalysts and only partially by chemical reduction with diimide. Under forcing conditions, incorporation of portions of the decomposition products of the precursor of the diimide was observed.     

聚甲基丙烯酸甲酯-丙烯酸酰胺嵌段共聚物的合成与表征

引发剂;苯胺;聚甲基丙烯酸甲酯-丙烯酸酰胺嵌段共聚物的合成与表征     

Synthesis of Graft Polymers by Copolymerization of Macromonomer. III. Preparation and Copolymerization of Styrene-Terminated Poly(Oxyethylene) Macromonomer

Styrene-terminated poly(oxyethylene) macromonomers (SOE) with narrow molecular weight distribution and quantitative styrene monofunc-tionality were synthesized. In homopolymerization of SOE, conversion of monomer to polymer was shown to be low in spite of high consumption of the vinyl groups of the SOE molecules. Free-radical copolymer-ization of the macromonomer with methyl methacrylate and styrene occurred smoothly, as opposed to homopolymerization. Cumulative copolymer composition and total conversion were determined from the conversions of macromonomer and comonomer (by weight changes) and by proton NMR of the copolymer. The monomer reactivity ratios were found to be r_a = 0.06 and r_b = 2.0 for the copolymerization of SOE macromonomer (a) with methyl methacrylate (b). In this case the macromonomer exhibited considerably lower reactivity than predicted from its low molecular weight model compound. The monomer reactivity ratios estimated for SOE and styrene were r_a = 0.86 and r_b = 1.20. The reactivity of SOE was comparable to, but somewhat lower than, styrene. The graft copolymers were used as activators in the halogen displacement reaction, and it was found that their catalytic activity depends on copolymer composition and chemical structure.     

Synthesis and Properties of Hydrophilic Polymers. 4. Preparation and Characterization of Poly(Oxyethylene) Telechelics with Different Aromatic Termini

Abstract

Several telechelic compounds were prepared by terminal functionalization of poly(oxyethylene) diacid via the reaction of the carboxylic groups with different aromatic amines. Starting from the telechelic diacid, the corresponding diacid chloride was prepared with thionyl chloride after which the compound was allowed to react with aniline, 2-naphtylamine, and 2-aminoanthracene. The telechelic products were characterized by UV/Vis, ¹H-NMR, ¹³C-NMR, and IR spectroscopy. The UV/Vis spectrometric data were compared to those of the corresponding amines. In addition, refractive indices and solubility characteristics were also determined. In addition, the spectroscopic data were compared with respect to increasing terminal chain extension by the three aromatic compounds.     

聚甲基丙烯酸甲酯/二氧化硅杂化材料制备与性能

溶胶-凝胶;聚硅酸;聚甲基丙烯酸甲酯/二氧化硅杂化材料制备与性能     

Synthesis and Characterization of Bagasse Poly(methyl methacrylate) Graft Copolymer

Summary: Graft copolymerization of methyl methacrylate (MMA) was carried out on bagasse fibers in an aqueous medium using ceric ammonium nitrate (CAN) as initiator under a neutral atmosphere. In order to obtain the optimum condition for graft copolymerization, the effects of initiator concentration, temperature, time of reaction, and monomer concentration were studied. The maximum grafting percent was found to be 122%. The bagasse grafted poly(methyl methacrylate) was characterized by FTIR and its thermal behavior was characterized by TGA.     

生物可降解聚丁二酸/甲基丁二酸丁二酯系列共聚物的合成和表征

摘要合成了一系列聚丁二酸/甲基丁二酸丁二醇共聚酯(PBSM), 利用DSC, ¹H NMR和X射线衍射等方法对共聚物组成、 热学性能、 结晶性能、 等温结晶行为进行了研究. 结果表明, 引入甲基丁二酸共聚单元较为显著地改变了聚丁二酸丁二酯(PBS)的热学性能, 利用Hoffman\|Weeks方程得到的共聚物平衡熔点随共聚物的组分含量增加而降低, 玻璃化转变温度亦有所降低, 熔点则符合无规共聚物的Flory方程. 此外, 利用Avrami方程分别研究了均聚物PBS及共聚物PBSM-20的等温结晶行为, 结果表明, 在所研究的温度范围内, 聚酯结晶速率随温度升高而降低, PBS和PBSM\-20的Avrami指数分别介于2.8~3.0和2.7~3.0之间, 结晶方式为三维生长异相成核, 而X射线衍射测试结果表明晶体结构几乎不变.     

非晶聚对苯二甲酸乙二酯的制备与表征

采用引入U-polymer的路线制备了非晶聚对苯二甲酸乙二酯(APET).用DSC和DMA等手段研究了APET的性能.结果表明,经改性后得到的APET无结晶,透明性得到改善,玻璃化转变温度和储能模量都较PET有一定程度提高.     

分散聚合法制备甲基丙烯酸甲酯-苯乙烯共聚物微球

以聚乙烯吡咯烷酮(PVP)为分散剂,以偶氮二异丁腈(AIBN)为引发剂,在甲醇／水混合溶剂中,采用分散聚合法制备出微米级的甲基丙烯酸甲酯一苯乙烯共聚物微球,研究了分散介质组成、单体组成、引发剂浓度、分散剂浓度、反应温度等反应条件对聚合产物粒径及粒径分布的影响。     

温度敏感聚(N-异丙基丙烯酰胺)/聚(乙烯醇)水凝胶的制备及性能研究

聚 (N -异丙基丙烯酰胺 ) (PNIPA)水凝胶具有温度敏感性 ,其在 33℃左右有一个相转变温度或较低临界溶解温度 (L CST) [1,2 ] .当外界温度低于 LCST时 ,PNIPA水凝胶吸水溶胀 ;而当外界温度高于L CST时 ,PNIPA水凝胶剧烈收缩失水 ,发生相分离 .这种相分离特性应用于药物的控制释放 [3] .固定化酶[4 ] 和循环吸收剂 [5] 等领域 .然而 ,通常的 PNIPA水凝胶是通过化学键交联而成的三维网络聚合物 ,很难发生解体或进行生物降解 ,其在某些特定场合 (如药物的体内释放等 )受到一定限制 .聚乙烯醇 (PVA)的亲水性和生物相容性较好 ,是…     

Synthesis and Characterization of Small Band-gap Conjugated Polymers - Poly(pyrrolyl methines)

A kind of small band-gap conjugated polymers-poly (pyrrolyl methines) and their precursors-(poly pyrrolyl methanes) have been synthesized by a simple method and characterized by 1HNMR, FT-IR, TGA and UV-Vis. These polymers can be dissolved in high polar solvents such as DMSO, DMF or NMP. The results reveals that the band-gap of the synthesized conjugated polymers are in the range of 0.96～1.14 eV and they all belong to the small band-gap polymers. The conductivity of doped products with iodine is in the range of semiconductor.     

Preparation and Characterization of Titania-grafted Poly（styrene-divinybenzene） Nanocomposite Microspheres

Titania-grafted poly（styrene-divinylbenzene）（TiO2/PSt-DVB） nanocomposite microspheres were prepared by an open-ring reaction and radical grafting copolymerization method. The TiO2 nanoparticles were first modified by attachment of epoxy groups to their surfaces to provide reactive groups that could covalently bond to the polymer （PSt-DVB） microspheres. The nanocomposite obtained was characterized by FTIR, SEM, XRD, and TGA analyses as well as UV-Vis spectrophotometry. The results indicated that the TiO2 nanoparticles were uniformly grafted onto the surface of the polymer microsphere producing grain sizes of about 5―10 μm. The modified TiO2 showed better UV absorbing property than the unmodified form, and the nanocomposite also retained the same UV absorbing property as the free modified TiO2 nanoparticle.     

松香基聚醚酯弹性体的制备及表征

通过松香与聚醚丙烯酸酯的Diels Alder加成产物与聚乙二醇、柠檬酸的缩聚反应,合成出松香基聚醚酯弹性体,产物采用红外、拉伸、DSC和TGA进行了表征。 TGA测试表明,松香基聚醚酯弹性体的10%热失重温度在300 ℃以上,拉伸测试表明,拉伸强度为0.26～0.62 MPa,断裂伸长率为338%～458%。     

富勒烯化聚环氧丙基咔唑的合成与表征

通过Ｆｒｉｅｄｅｌ－Ｃｒｒａｆｔｓ反应制备了富勒烯化的聚环氧丙基咔唑，聚合物中Ｃ６０的含量最高可达７．６ｗｔ％。通过凝胶渗透色谱法测定了聚合物分子量，并采用＾上Ｈ和＾１３Ｃ－ＮＭＲ，ＩＲ，热分析及光谱等手段对其结构进行了分析与表征。     

聚2,5-呋喃二甲酸乙二醇酯/聚丁二酸丁二醇酯共混物的制备与表征

通过熔融共混制备了聚2,5-呋喃二甲酸乙二醇酯(PEF)/聚丁二酸丁二醇酯(PBS)共混物,探究了制备PEF/PBS共混物的影响因素,考察了共混温度、共混时间、螺杆转速、共混比例对PEF/PBS共混物力学性能的影响因素,并用示差扫描量热仪、热失重、扫描电子显微镜等技术手段对其热性能和相容性进行了表征。 结果表明,当PBS的含量为15%、共混温度为230 ℃,共混时间为90 s、螺杆转速为150 r/min时,为最佳共混制备条件,此时相容性最好,热性能良好,冲击强度和拉伸强度最大,冲击强度相对纯PEF提高了6倍,拉伸强度提高了近20%,从而大幅提高了PEF的冲击强度,有效地增强了PEF的抗冲击韧性。 这些工作为这一生物基聚酯材料的应用提供了可能。     

新型含螺噁嗪聚甲基丙烯酸甲酯微球的制备与光致变色性能

以甲基丙烯酸甲酯（MMA）为原料,螺噁嗪（SPO）为光致变色染料,经悬浮聚合法制备了光致变色微球（PMMA SPO）,其结构经红外光谱、扫描电镜和差热分析表征。研究了SPO浓度对微球转化率和环境温度对光致变色开环体热稳定性的影响。结果表明：在SPO的空间位阻效影响下,微球的玻璃化转变温度由82.4 ℃升高至85.3 ℃,随着SPO浓度下降,微球转化率由89%降低至15%,光致变色开环体的热稳定性随环境温度增大而增强,微球在淡粉色和黄绿色之间可逆转化20次以上未见明显的疲劳现象。     

聚甲基丙烯酸甲酯-氯化银复合纳米微球的制备及其摩擦学性能

采用原位种子乳液聚合法合成了聚甲基丙烯酸甲酯 氯化银(PMMA AgCl)核壳结构复合纳米微球,通过透射电镜(TEM),红外光谱(IR),热分析(TG DTA)和X射线粉末衍射(XRD)等测试手段对其结构及性能进行了表征.在四球试验机上对其摩擦学行为进行了考察,研究结果表明,PMMA AgCl核壳结构复合纳米微球用作润滑油添加剂具有良好的抗磨性能,能显著提高基础油的失效负荷.