Synthesis of O‐(2,3‐dihydroxypropyl) cellulose in NaOH/urea aqueous solution: As a precursor for introducing “necklace‐like” structure

O‐(2,3‐dihydroxypropyl) cellulose (DHPC) samples were synthesized by etherification of cellulose with glycidol (GLY) in a NaOH/urea aqueous solution system under different reaction conditions, so that they had different degrees of ether substitution (DS) in both the overall and regional distributions. The characterization was made by NMR spectroscopy in order to clarify the effects of the molar ratio of in‐fed GLY to anhydroglucose unit and of the reaction temperature not only on the total and regional DSs but also on the molar substitution (MS_dhp) for the multireactive dihydroxypropyl group. The evaluation of MS_dhp was performed after complete propionylation of each DHPC sample. Determination of molecular weights was also conducted on the propionylated DHPCs by GPC analysis. As a preliminary extension, butyralization of DHPC was undertaken in aqueous solution by using p‐toluenesulfonic acid as catalyst together with butyraldehyde (BuA). Two‐dimensional NMR (¹H–¹³C gHSQC) spectra measurements revealed that the products contained butyral groups, owing to dehydration‐cyclization between the BuA‐carbonyl and the duplicate hydroxyls in the side chain of DHPC. Such butyral derivatives of cellulose are expected to be a promising functional material parallel or superior to poly(vinyl butyral) available for safety glass interlayers, etc. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3590–3597     

Synthesis and Characterization of Water-Soluble Graft Copolymers from 2, 3-Dihydroxypropylcellulose and Acrylamide

Water-soluble 2,3-dihydroxypropylcellulose-polyacrylamide graft copolymers (DHPC-g-PAM) were prepared by Ce⁴⁺ ion-initiated graft copolymerization of acrylamide (AM) onto 2,3-dihydroxypropylcellulose (DHPC) dissolved in dilute nitric acid at room temperature under argon. The ratios of the concentration of Ce⁴⁺ ion to the concentration of DHPC were shown to affect the number and the length of the polyacrylamide grafts. The average number of grafts per chain was determined by acid-catalyzed degradation of the cellulose backbone and was found to be consistent with the presence or absence of free DHPC in the polymerization product prior to hydrolysis. The average number of grafts per DHPC molecule was found to be 2.7 or less depending on the reaction conditions.     

Interactions of ionic liquids with polysaccharides 9. Hydroxyalkylation of cellulose without additional inorganic bases

Water-soluble hydroxyalkyl cellulose with a molar degree of substitution of up to 2.79 was prepared under completely homogeneous reaction conditions in various ionic liquids without addition of inorganic bases. In acetate containing solvents the IL acts as a catalyst. The substitution patterns of the cellulose ethers were analyzed by ¹³C NMR spectroscopy, ¹H NMR spectroscopy after peracetylation and GLC/MS after permethylation and depolymerization. A diminished tendency towards the formation of side chains compared to heterogeneously prepared hydroxyalkyl celluloses in the presence of inorganic bases was found.     

Structural and thermal characterization of sugarcane bagasse cellulose succinates prepared in ionic liquid

The chemical modification of SCB cellulose with succinic anhydride using 1-butyl-3-methylimidazolium chloride ionic liquid/DMSO system as reaction medium was studied. The parameters including the molar ratio of succinic anhydride/anhydroglucose units in cellulose from 1:1 to 12:1, reaction time 5-120 min, and reaction temperature 85-105 °C were investigated. The results showed that the degree substitution of succinylated cellulosic preparations ranged from 0.037 to 0.53. It was found that the treatment of the native cellulose in the ionic liquid/DMSO system under the conditions given significantly degraded the cellulose and completely destroyed the cellulose crystals. FT-IR and solid-state CP/MAS ¹³C NMR spectra produced evidence for succinoylation reaction and the results showed that succinoylation occurred at positions C-6, C-2 and C-3. The thermal stability of the succinylated cellulose decreased upon chemical modification.     

Phenoxyhydroxypropylhydroxyethylcellulose—new amphiphilic cellulose derivative

A new amphiphilic cellulose derivative phenoxyhydroxypropylhydroxyethylcellulose of substitution degree up to 0.67 was synthesized by reaction of water-soluble hydroxyethylcellulose with 2,3-epoxypropylphenylether in the presence of sodium hydroxide as a catalyst. The chemical composition of the derivative was confirmed by means of UV, IR- and ¹³C-NMR-spectroscopy. The derivatives with substitution degree up to 0.12 are soluble in water and water–alcohol mixtures. With increasing substitution degree, the polymers lose their water solubility, but still dissolve in water–alcohol mixtures. All products are soluble in aprotic solvents. The effect of the reaction conditions, such as temperature and molar ratios of reaction components, on both the reaction rate and degree of substitution was investigated.     

Novel cellulose esters derived from the levopimaric acid-maleic anhydride adduct: synthesis,characterization, and properties

Synthesis of maleated pimaric acid (MPA) cellulose esters is first reported in this work. Cellulose esterification was performed by reacting microcrystalline cellulose with monoacid chloride of MPA (MPA-Cl) in presence of pyridine as catalyst and reaction medium. The syntheses were started in a heterogeneous solid–liquid reaction medium, but as the reaction advanced, the reaction mass turned into a homogeneous solution. The effects of MPA-Cl/anhydroglucose unit molar ratio, reaction temperature, and reaction duration on the yield and degree of substitution (DS) of cellulose esters (CEs) were investigated. CEs with DS ranging from 2.6 to 2.8 were achieved at molar ratios of 5.5–6.0 after 12–16 h at 118 °C. The purified products were characterized by elemental analysis, IR and ¹³C-NMR spectroscopy, and thermogravimetric analysis. CEs are soluble or partially soluble in usual organic solvents, depending on DS. Transparent films were prepared using CE-cyclohexanone solutions.     

Synthesis of cellulose benzoates under homogeneous conditions in an ionic liquid

The ionic liquid 1-allyl-3-methylimidazolium chloride (AmimCl) as a reaction medium was studied for the synthesis of cellulose benzoates by homogeneous acylation of dissolved cellulose with benzoyl chlorides in the absence of any catalysts. Cellulose benzoates with a degree of substitution (DS) in the range from about 1 to 3.0 were accessible under mild conditions. The DS of cellulose derivatives increased with the increase of the molar ratio of benzoyl chloride/anhydroglucose unit (AGU) in cellulose, reaction time, and reaction temperature. Benzoylation of cellulose with some 4-substituted benzoyl chlorides including 4-toluoyl chloride, 4-chlorobenzoyl chloride and 4-nitrobenzoyl chloride was also readily carried out under mild conditions. Furthermore, regioselectively substituted mixed cellulose esters were synthesized in this work. All products were characterized by means of FT-IR, ¹H-NMR, and ¹³C-NMR spectroscopy. In addition, at the end of benzoylation of cellulose, the ionic liquid AmimCl was easily recycled. When the recycled AmimCl was used as the reaction media, the cellulose benzoate with a similar DS was obtained under comparable reaction conditions.     

Cold NaOH/urea aqueous dissolved cellulose for benzylation: Synthesis and characterization

Cold NaOH/urea aqueous dissolved cellulose was studied for the synthesis of benzyl cellulose by etherification with benzyl chloride. By varying the molar ratios of benzyl chloride to OH groups in cellulose (1.5–4.0) and reaction temperatures (65–70 °C), benzyl cellulose with a degree of substitutions (DS) in the range of 0.29–0.54 was successfully prepared under such mild conditions. The incorporation of benzyl groups into cellulose was evidenced by multiple spectroscopies, including FT IR, ¹H NMR, ¹³C NMR, CP/MAS ¹³C NMR and XRD. In addition, the thermal stability and surface morphology of the benzyl cellulose was also investigated with regard to the degree of substitution. The results indicated that the benzyl cellulose product with a low DS (0.51) in the present study reached the same solubility in many organic solvents as compared to those prepared in heterogeneous media. After benzylation, the sample decomposed at a lower temperature with a wider temperature range, which indicated that the thermal stability of benzyl cellulose was lower than that of the native cellulose. In addition, benzylation resulted in a pronounced reduction in crystallinity as well as a fundamental alteration of morphology of the native cellulose.     

Physico-chemical characterization of a cellulosic fraction from sugar beet pulp

The residue of sugar beet pulp from which pectin and alkaline soluble polysaccharides have been removed by microwave assisted extraction or conventional heat was treated with sodium monochloroacetate under alkaline pH to convert the residual cellulose present to carboxy methyl cellulose (CMC). Weight average molar masses ranged from about 96 to 220 × 10³ Daltons, weight average intrinsic viscosity from 1.9 to 4.1 dL/g and degree of substitution from 1.38 to 0.59. HPSEC with online molar mass detectors and Atomic Force Microscopy revealed that CMC was comprised of aggregated linear moieties in contact with spherical bodies. The linear portion was a mixture of rods and segmented rods. Some of the rods had long branches.     

Syntheses and characterizations of allyl cellulose and glycidyl cellulose

Allyl cellulose was synthesized by reacting cellulose with allyl bromide in homogeneous LiCl/DMAc solution containing NaOH powder. The degree of substitution (DS) per anhydroglucose (AHG) unit was determined by titrating the allyl cellulose with bromine in chloroform solution, and an allyl DS of 2.80 was found. Glycidyl cellulose was then prepared by reacting this allyl cellulose with peracetic acid in methylene chloride at ambient temperature for 6 days. The measured reaction rate constant was 1.33 × 10^?3 min^?1. The glycidyl cellulose thus obtained with a glycidyl DS of 2.58 was determined by titrating the product with perchloric acid in conjunction with tetrabutylammonium iodide. The 2.58 of glycidyl DS was also confirmed by ¹H-NMR integration. Both allyl cellulose and glycidyl cellulose were analyzed and characterized with FTIR, ¹H-NMR, ¹³C-NMR, TGA, and GPC. During epoxidation of allyl cellulose, possible side reaction leading to ester formation was evidenced from the continuous increase of v_{C? O} at 1735 cm^?1 in FTIR analyses. In addition, a bimodal distribution and a decreased molecular weight for glycidyl cellulose were found from GPC data, which might suggest a possible chain scission at the cellulosic ether linkage. © 1992 John Wiley & Sons, Inc.     

低取代度两亲性β-环糊精及其水相中纳米球的制备

将2-O-(2-羟丙基)-β-环糊精与十二烷基、十四烷基、十六烷基和十八烷基缩水甘油醚在吡啶中反应,合成了4个低取代度的两亲性β-环糊精衍生物(平均取代度分别为1.87、1.95、2.14和1.80)。 将上述4个化合物分散于水中自组装成可稳定2~3周的纳米球,并且均呈现出较好的分散度和均匀性。     

Synthesis of Cellulose Long-Chain Esters in 1-Butyl-3-methylimidazolium Acetate: Structure-Property Relations

In this study, we prepared cellulose long-chain esters homogeneously in 1-butyl-3-methylimidazolium acetate, using cotton linter as the raw material, long-chain fatty acid as the esterification agent and paratoluensulfonyl chloride as the co-reactant. Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy and X-ray diffraction were used to characterize the product. The maximum degree of substitution was found to be 1.53 when the molar ratio of cellulose, lauric acid and paratoluensulfonyl chloride was 1 : 6 : 6, provided that the reaction temperature was 60°C and the reaction time was 24 h. The mechanical property of the free-film made of cellulose laurate was also tested. It was found that the toughness of cellulose laurate was much better than that of cellulose acetate.     

Structural Phase Behavior of High-Concentration,Alignable Biomimetic Bicelle Mixtures

The structures of bicelle mixtures composed of dimyristoyl and dihexanoyl phosphatidylcholines (DMPC and DHPC) with DMPC/DHPC molar ratios of 3.2 and 5 are characterized using polarized optical microscopy (POM) and small angle neutron scattering (SANS). Three phases, isotropic (I), chiral nematic (N^*) and smectic (S) are observed as temperature (T) varies from 10 to 70 °C. The structure of the magnetically alignable N^* phase, which was previously considered to be made up of discoidal micelles, is found to be composed of “ribbons”. Doping with the charged lipid, dimyristoyl phosphatidylglycerol (DMPG), which has the same 14:0 hydrocarbon chains as DMPC, results in a structural change of the aggregates where only the isotropic and smectic phases are observed. The smectic phase for the mixtures doped with DMPG is shear-alignable and follows one-dimensional swelling. However, at high-T zwitterionic DMPC/DHPC mixtures form multi-lamellar vesicles (MLV) with a relatively constant lamellar spacing of 66 Å, independent of water content.     

Preparation and properties of a new type of comb-shaped, amphiphilic cellulose derivative

Comb-shaped, amphiphilic O-(2- hydroxy-3-butoxypropyl) cellulose (HBPC) was prepared by a homogeneous reaction of cellulose with butyl glycidyl ether (BGE) in a 10% (w/w) LiCl--DMAc solution. It was found that: (a) the molar substitution (MS) of water-soluble HBPC ranges from 0.4 to 1.0, and is nearly equal to its degree of substitution (DS), indicating that the HBPC derivatives obtained are comb-shaped polymers; (b) the water-soluble HBPC shows a thermally reversible sol-gel transition in aqueous solution; and (c) the derivative having a DS of 0.6 shows surface activity with critical micelle concentration (cmc) in the order of 0.8 g/l and surface tension of 31.5 dyn/cm     

Synthesis and Characterization of Cellulose Triacetate Obtained from Date Palm (Phoenix dactylifera L.) Trunk Mesh-Derived Cellulose

Cellulosic polysaccharides have increasingly been recognized as a viable substitute for the depleting petro-based feedstock due to numerous modification options for obtaining a plethora of bio-based materials. In this study, cellulose triacetate was synthesized from pure cellulose obtained from the waste lignocellulosic part of date palm (Phoenix dactylifera L.). To achieve a degree of substitution (DS) of the hydroxyl group of 2.9, a heterogeneous acetylation reaction was carried out with acetic anhydride as an acetyl donor. The obtained cellulose ester was compared with a commercially available derivative and characterized using various analytical methods. This cellulose triacetate contains approximately 43.9% acetyl and has a molecular weight of 205,102 g·mol⁻¹. The maximum thermal decomposition temperature of acetate was found to be 380 °C, similar to that of a reference sample. Thus, the synthesized ester derivate can be suitable for fabricating biodegradable and “all cellulose” biocomposite systems.     

Benzylation of cellulose in the solvent dimethylsulfoxide/tetrabutylammonium fluoride trihydrate

The cellulose solvent dimethylsulfoxide/tetrabutylammonium fluoride trihydrate (TBAF·3 H₂O) was studied as reaction medium for the synthesis of benzyl cellulose (BC) by treating the dissolved polymer with benzyl chloride in the presence of solid NaOH or aqueous NaOH solution. BC samples with degree of substitution (DS) between 0.40 and 2.85 were accessible applying different molar ratios. The studies show that both the TBAF·3 H₂O concentration and the molar ratio of the reagents to repeating unit influence the DS. The solubility of the BC synthesized in a different way, however, of comparable DS is different. Structural analyses were carried out by means of FTIR-, ¹H- and ¹³C NMR spectroscopy. SEC measurements revealed polymer aggregation in samples of low DS synthesized in a solvent containing 9.0% TBAF·3 H₂O. At higher concentration of TBAF·3 H₂O in the solvent, the BC samples obtained do not form aggregates. BC of high DS is crystalline and shows thermotropic liquid crystalline behavior as analyzed by means of DSC. Melting point and degradation temperature are not related to the DS.     

Kinetics and Mechanism of the Reaction between Barbituric Acid and Glycidol,Part III: Methylene Group Reaction with Glycidol at High Concentration

The reaction of barbituric acid and glycidol leads to formation of oligoetherols upon addition of glycidol both to the methylene group and imide groups of barbituric acid. The mechanism of reaction was established by kinetic studies on the reaction between 1,3‐dimethylbarbituric acid and glycidol used at high concentration. The obtained rate law and mechanism have been derived from kinetic studies and the results obtained before, where 1,3‐dimethylbarbituric acid and glycidol were used in comparable concentrations. The completed kinetic characteristics of the system is described. It has been found that glycidol reacted with methylene groups of 3‐dimethylbarbituric according to the equation: . The rate‐determining step was transformation of enolate into carbanion. Activation energy of the reaction was 61.3 kJ mol⁻¹ · K⁻¹. Proton transfer from methylene group of 1,3‐dimethylbarbituric into glycidol oxirane oxygen was observed by the ¹H‐NMR spectroscopy.     

Photocrosslinking of Polyglycidol and Its Derivative: Route to Thermoresponsive Hydrogels

Hydrogels of biologically well‐tolerated, high‐molar‐mass polyglycidol (PGl) and its thermoresponsive derivative poly(glycidol‐co‐ethyl glycidyl carbamate) have been obtained by direct UV crosslinking in the solid state. Polymers with molar masses up to 1.45 × 10⁶ g mol⁻¹ were crosslinked in the presence of benzophenone or (4‐benzoylbenzyl)trimethylammonium chloride as photosensitizers. The photosensitizer concentration was varied from 2 to 10 wt%. The influence of polymer composition and photosensitizer type and amount on the crosslinking efficiency, swelling and temperature behavior of the obtained hydrogels was investigated. The photocrosslinking of PGl and poly(glycidol‐co‐ethyl glycidyl carbamate) led to hydrogels with swelling degrees up to 1700%. The swelling degrees of the hydrogels decreased with the increase of the environmental temperature indicating the thermoresponsive nature of gels. The swelling of obtained gels can be controlled by varying the composition of the copolymer precursor and by the network density.     

Characterization of Water-Soluble Cellulose Derivatives in Terms of the Molar Mass and Particle Size as well as Their Distribution

The property profile of cellulose derivatives dissolved in aqueous solvents is not only dependent on the chemical composition (average-, molar- or regiospecific degree of substitution, as well as the substitution along the chain), solvent, temperature and concentration but also on the molar mass and the particle size. All this information can be obtained from the Mark-Houwink-Sakurada-relationship ([;gh]-M-) or the R_G-M-relationship, if these are at hand. These relationships are suitable for a specific degree of substitution. The R_G-M-relationship has only been determined and published for a few water-soluble cellulose derivatives. The prerequisite is the availability of a homologous series of samples with the same chemical composition. In this paper it is shown that only the ultrasonic degradation is able to create such a series. Due to the ability of coupled methods of analysis to acquiring absolute data, molar mass and particle size distributions have been compiled in recent years. Using such methods it was possible to determine molar mass and particle size distributions of several aqueous cellulose derivative solutions by combining a fractionation unit (size exclusion chromatography (SEC) or flow field-flow fractionation (FFFF)) with multi angle laser light scattering (MALLS) for the detection of Mw and R_G and concentration detection (DRI). Results for nonionic cellulose ethers, mixed cellulose ethers, ionic carboxymethyl cellulose, sulfoethyl cellulose, hydrophobically modified hydroxyethyl cellulose were obtained and are partially discussed with focus on the recovery of cellulose derivates after fractionation and the impact on the distribution functions.     

Efficient synthesis of cellulose furoates in 1-<Emphasis Type="Italic">N</Emphasis>-butyl-3-methylimidazolium chloride

The ionic liquid 1-N-butyl-3-methylimidazolium chloride ([C₄mim]⁺Cl⁻) was investigated as reaction media for the homogeneous acylation of cellulose with 2-furoyl chloride in the presence of pyridine. The preparation of cellulose furoate depending on the reaction conditions, the cellulose type and the pyridine content was studied. Cellulose furoates with a degree of substitution in the range from 0.46 to 3.0 were accessible, i.e., under mild conditions, with a low excess of reagent and in a short reaction time. The products were characterized by elemental analysis, perpropionylation, ¹H- and ¹³C NMR spectroscopy and FTIR spectroscopy. Thomas Heinze is the member of the European Polysaccharide Network of Excellence (EPNOE), www.epnoe.eu