乙烯基二联苯单体的螺旋选择性自由基聚合

为了深入理解乙烯基二联苯单体自由基聚合过程中的手性传递,进行了手性单体(+)-2-[(S)-异丁氧羰基-5-(4′-己氧基苯基)苯乙烯、非手性单体2-丁氧羰基-5-(4′-己氧基苯基)苯乙烯的均聚反应及它们二者的共聚反应,探讨了聚合温度和溶剂性质对手性单体均聚物旋光活性、手性单体含量对共聚物旋光活性以及聚合反应溶剂的超分子手性对共聚物旋光活性的影响.研究发现,降低聚合温度、采用液晶性反应介质有利于得到旋光度大的聚合物;少量手性单体的引入即可诱导共聚物形成某一方向占优的螺旋构象,比旋光度随手性单体的含量增加呈线性增长;在胆甾相液晶中制备的非手性单体聚合物不具有光学活性.这些结果表明,该类乙烯基二联苯聚合物具有动态螺旋构象,其光学活性主要依赖于主链的立构规整度和侧基不对称原子的手性.     

Photoinduced ionic polymerization. II. Cationic polymerization of α-methylstyrene in the presence of tetracyanobenzene

The dependence of the rate of polymerization on light intensity and the stereoregularity of the polymer was studied to elucidate the propagation and termination mechanisms of the photoinduced cationic polymerization of α-methylstyrene in the presence of tetracyanobenzene in methylene chloride. The rate of polymerization was proportional to the light intensity. The polymer is highly syndiotactic, and the stereoregularity is similar to that of polymers obtained by radiation-induced cationic polymerization. The initiation mechanism was also studied by electron spin resonance, by which the anion radical of tetracyanobenzene formed from a photoexcited complex between α-methylstyrene and tetracyanobenzene was observed. The cation radical of α-methylstyrene, counterpart of the anion radical, is believed to initiate the polymerization.     

采用阴离子、基团转移及自由基聚合方法合成旋光性聚甲基丙烯酸薄荷酯

近年来, 旋光性高分子的广泛应用及其特有的功能已引起了广泛关注, 尤其在手性记忆功能材料[1～3]、液晶及手性催化等方面[4～6]皆表现出良好的应用前景. 用旋光性单体合成旋光性聚合物是最常用的方法之一. 早在20世纪70年代, 就有关于聚甲基丙烯酸薄荷酯(PMnMA)的研究[7], 但有关配体参与的阴离子聚合, 基团转移聚合(GTP)及其立构规整性的研究还未见报道.     

Polymerization of methyl methacrylate under ultrasonic irradiation. Part IV. Effect of ultrasonic irradiation on Grignard catalyst and stereoregularity of the polymers produced in dioxane–tetrahydrofuran mixed solvent

Two series of polymerization of methyl methacrylate with Grignard reagent in dioxane—tetrahydrofuran mixed solvent was carried out under ultrasonic irradiation. In series A, catalyst was added to the mixture of monomer and solvent, and in series B, catalyst was previously mixed with solvent. The effect of ultrasonic irradiation on Grignard catalyst and the microstructure in reacting sites were discussed on the basis of the stereoregularity of the polymers produced. The stereoregularity of the polymers in series A was higher than that in series B. The effect of ultrasonic irradiation on the stereoregularity was completely reversed in series A and B and it increased in the former and decreased in the latter. It was, therefore, assumed that ultrasonic irradiation affected the microstructure in the reacting sites in series A, while it increased the relative amount of R₂Mg which gave polymers with poor stereoregularity in series B.     

Functional monomers and polymers. XXXXI. Template polymerization of methacryloyl-type monomers containing nucleic acid bases

In due consideration of the specific base–base interaction that exists between nucleic acid molecules, the free radical polymerization of N-β-methacryloyloxyethyl derivatives of adenine, thymine, and theophylline initiated by azobisisobutyronitrile (AIBN) was studied in the presence of N-β-methacryloyloxyethyl-type polymers which have complementary nucleic acid bases as template polymers. The rate of polymerization of N-β-methacryloyloxyethyladenine was accelerated when poly(N-β-methacryloyloxyethyluracil) or -thymine was present in the polymerization system. The effect of the stereoregularity of the template polymers, as well as polymerization temperature and the sort of solvents used on the rate of polymerization, was studied and discussed in some detail. The results suggest that the interaction between complementary bases plays a role in template polymerization behavior.     

Influence of preparative conditions on molecular weight and stereoregularity distributions of polypropylene

The influence of preparative conditions on the molecular weight and stereoregularity distributions of polypropylene was investigated. The stereoregularity distribution is narrowed by using a highly stereospecific catalyst, by decreasing the polymerization temperature, and for the three-component catalyst by keeping the mole proportion of the electron-donating third component at 0.5. The molecular weight distribution can be narrowed by using a highly stereospecific catalyst, a high monomer concentration, and a high polymerization temperature, and by having a lower conversion, particularly at low monomer concentration. The possibility of long-chain branching in polypropylene was indicated by data from the fractionation of tritium-labeled polymers.     

Stereochemistry of the free‐radical polymerization of zinc methacrylates coordinated with a bidentate ligand

The polymerization of zinc methacrylates coordinated with a bidentate ligand ( 1 – 4 ) was carried out in chloroform at 60°C. The polymerization of these monomers gave chloroform‐insoluble polymers. Stereoregularity of the polymers was estimated from ¹H NMR spectra of poly(methyl methacrylate)s (PMMAs) derived from the original polymers. Monomers 1 and 2 gave slightly different polymers compared with conventional ones obtained by polymerization of methacrylic acid, while 3 afforded higher amounts of isotactic polymers than 1 and 2 . Conversely, 4 gave a polymer of high syndiotacticity. Furthermore, the relationship between triad tacticity and monomer concentration in the feed was studied. Consequently, it was demonstrated that the structure of bidentate ligands coordinated with zinc ion influences the stereoregularity of the resulting polymers.     

Stereospecific polymerization of benzyl α-(alkoxymethyl) acrylates

α-(Alkoxymethyl) acrylates, such as methyl α-(phenoxymethyl) acrylate, benzyl α-(methoxymethyl)acrylate (BMMA), benzyl α-(benzyloxymethyl)acrylate, and benzyl α-(tert-butoxymethyl)acrylate, were synthesized, and their polymerizability and the stereoregularity of the polymers obtained by radical and anionic methods were investigated. The radically obtained polymers were found to be atactic by ¹³C- and ¹H-NMR analyses, but the polymers obtained with lithium reagents in toluene at −78°C were highly isotactic. Further, it is noteworthy that isotactic polymers were also produced with lithium reagents even in tetrahydrofuran. Effects of polymerization temperature and counter cation on stereoregularity were clearly observed in the polymerization of BMMA, and a potassium reagent afforded an almost atactic polymer. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 721–726, 1997     

Stereocontrol in radical polymerization

The stereospecific radical polymerization of vinyl esters, methacrylates, and alpha-substituted acrylates was studied. Fluoroalcohols, as a solvent, have remarkable effects on the stereoregularity of the radical polymerizations of vinyl acetate, vinyl pivalate, and vinyl benzoate, affording polymers rich in syndiotacticity, heterotacticity, and isotacticity, respectively. This method was successfully applied to the polymerization of methacrylates to give syndiotactic polymers. The steric repulsion between the entering monomer and the chain-end monomeric unit bound by the solvent through hydrogen bonding is important for the stereochemical control in these systems. Lewis acid catalysts, such as lanthanide trifluoromethanesulfonates and zinc salts, were also effective for the stereocontrol during the radical polymerization of methyl methacrylate, to reduce the syndiotacticity and alpha-(alkoxymethyl)acrylates to synthesize isotactic and syndiotactic polymers. Radical polymerization of the methacrylates bearing a bulky ester group, such as the triphenylmethyl methacrylate derivatives, gave highly isotactic polymers, as in the case of anionic polymerization. In addition, the control of one-handed helical conformation was attained in the radical polymerization of 1-phenyldibenzosuberyl methacrylate using chiral neomenthanethiol or cobalt(II) complexes as an additive.     

Anionic Polymerizations and Copolymerizations of Methacrylates-Reactivity of Monomer and Tacticity of Polymer

The anionic polymerizations and copolymerizations of methacrylates were investigated. The studies were focused on the stereoregularity of the polymers and the relative reactivity of the monomers in relation to the stereospecificity of polymerization.     

Polymerization of methyl methacrylate under ultrasonic irradiation. Part V. Effect of ultrasonic irradiation on stereoregularity of the polymers and oligomers produced by grignard catalyst in toluene–dioxane mixed solvent

Polymerization of methyl methacrylate with Grignard reagent in toluene–dioxane mixed solvent was carried out under ultrasonic irradiation. The effects of ultrasonic irradiation and the order of catalyst addition on Grignard reagent and the microstructure in the reacting sites were examined on the basis of the stereoregularity of polymers and oligomers produced. The formation of oligomers was also discussed on the basis of the consumption of initiator. The stereoregularity of the polymers in series A (no ripening of catalyst with solvent) is higher than that in series B (ripening of catalyst with solvent). The effect of ultrasonic irradiation on the stereoregularity was completely reversed in series A and B; it increased in the former and decreased in the latter with ultrasonic irradiation. Similar results were obtained for the stereoregularity of the oligomers, but the stereoregularity of the oligomers was lower than that of polymers.     

Stereoselective Polymerization of Aromatic Vinyl Polar Monomers

Polar vinyl polymers, a class of polymers with polar groups as side chains, have significant advantages over conventional nonpolar polyolefin materials in terms of viscosity, toughness, interfacial properties (dyeability and printability), and compatibility with solvents or other polymers. Among them, aromatic polar vinyl polymers are of interest because of their good heat resistance properties. In addition, stereoselective polymerization of aromatic polar vinyl monomers has been rapidly developed because the steric structure of the polymer has a significant impact on its physical properties. In this paper, we review the research progress of stereoselective polymerization catalysts for aromatic polar vinyl monomers in recent years, discuss in detail the influence of ligand structure, electronic effect of substituents, spatial site resistance effect, central rare earth metal species and polymerization solvents on the activity and stereoselectivity of polymerization reactions, and explore the possible mechanism of polymerization reaction.     

Photoinitiated Cationic Polymerization of Unconventional Monomers

Photoinitiated cationic polymerization of unconventional monomers namely, benzoxazines, monothiocarbonates and macromonomers of poly(ε-caprolactone) and poly(ethylene oxide) is described. Ring opening polymerization of benzoxazines and thiocarbonates by direct and sensitized photoinitiation using onium salts was studied. The structures of the resulting polybenzoxazine were complex and related to the ring opening process of the protanated monomer either at through oxygen or nitrogen atoms. In the case of monothiocarbonate, the polymerization was accompanied with isomerization of thiocarbonate group. The potential use of macromonomers in photoiniated cationic polymerization to design complex macromolecular structures such as graft copolymers, water-borne photoresist materials and networks with dangling chains was presented. Photoinduced oxidative polymerization of thiophene, precursor for conducting polymers, using onium salts was also demonstrated.     

Cationic polymerization of α,β-disubstituted olefins. XV. Stereospecific polymerization of butenyl ethers by cationic catalysts

Methyl, ethyl, and isopropyl butenyl ethers, CH₃CH₂CH?CHOR, were polymerized with homogeneous catalysts at ?78°C. Toluene, methylene chloride, and nitroethane were used as solvents, and BF₃O(C₂H₅)₂ and SnCl₄·CCl₃CO₂H were used as catalysts. The stereoregularity of the polymers were compared by x-ray diagrams and infrared absorption ratios. The stereoregularity of polymers increased with increasing content of the trans isomer in the monomer and with increasing polarity of the solvent. In the polymerization of methyl and ethyl butenyl ethers, crystalline polymers were obtained from both the trans and cis isomers. The crystalline polymer prepared from the trans isomer and that from the cis isomer had the same steric structure. This behavior is quite different from that observed in the polymerization of propenyl ethers. It is concluded that the bulkiness of the group on the olefinic β-carbon plays an important role in the stereospecific polymerization of α,β-disubstituted olefins.     

Sulfur-Containing Vinyl Monomers. XIX. Radical Polymerization of 2-Mercaptobenzothiazolyl Methacrylate

2-Mercaptobenzothiazolyl methacrylate (MBTM) was synthesized by the reaction of 2-mercaptobenzothiazole and methacrylyl chloride in tetrahydrofuran at -18°C. MBTM was found to polymerize in the presence of 2,2′-azobisisobutyronitrile (AIBN), n-BuLi, and UV light. From the kinetic studies of radical polymerization of MBTM with AIBN in benzene at 60°C, the overall activation energy was determined to be 18.9 kcal/mole, and the rate of polymerization (R) was expressed as R_p = k[AIBN]^0.5 [MBTM], where k is the overall polymerization rate constant. From these results this polymerization was confirmed to proceed via an ordinary radical mechanism. This monomer (M₂) was also copolymerized radically with styrene (M₁) at 60°C, and the resulting copolymerization parameters were determined as r₁ = 0.042, r₂ = 0.20, Q₂ = 4.09, and e₂ = 1.39. The thermal stability and the photodegradation behavior of the polymers were examined, and they were compared with those of the related polymers.     

Synthesis and chiral recognition ability of optically active poly{N‐[(R)‐α‐methoxycarbonylbenzyl]methacrylamide} with various tacticities by radical polymerization using Lewis acids

The radical polymerization of an optically active methacrylamide, N‐[(R)‐α‐methoxycarbonylbenzyl]methacrylamide, was carried out in the absence and presence of Lewis acids such as yittribium trifluoromethanesulfonate [Yb(OTf)₃] and scandium trifluoromethanesulfonate [Sc(OTf)₃]. Catalytic amounts of the Lewis acids significantly affected the stereoregularity of the obtained polymers. The polymerization with Yb(OTf)₃ in tetrahydrofuran afforded isotactic polymers (up to mm = 87%), whereas the conventional radical method without the Lewis acid produced polymers rich in syndiotacticity (up to rr = 88%). The radical polymerization in the presence of MgBr₂ proceeded in a heterotactic‐selective manner (mr = 63%). Thus, the isotactic, syndiotactic, and heterotactic poly(methacrylamide)s were synthesized by the radical processes. The chiral recognition abilities of the obtained optically active poly(methacrylamide)s were affected by the stereoregularity. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3354–3360, 2003     

Characterization and study of microwave activation effects on the polystyrene tacticity

¹³C Nuclear magnetic resonance proved to be an advantageous tool to determine the stereoregularity of polystyrene polymers. The latter was achieved through the analysis of the signal of the quaternary carbon and that of the carbon-p in the aromatic ring too. Styrene was polymerized through microwaves and conventional heating activation using two different polymerization techniques: emulsion and bulk. Microwave activation was performed in a mono-modal type device under the following experimental conditions: various initiator concentrations, an average irradiation power of 50?W, temperature of 70°C, and using a batch reactor for emulsion and bulk experiments. The results obtained in these experiments were compared with those obtained by conventional heating activation polymerization under the same initiator concentration and temperature conditions. Microwave-activated reactions resulted in shorter reaction times and higher yields. The tacticity of the polymer samples was not significantly altered, which lead to the conclusion that, in this case, the stereoregularity of polystyrene was not influenced by microwave irradiation.     

Functional Monomers and Polymers Containing Nucleic Acid Bases: Experiments on Template Polymerization

In order to see how the specific base-base interactions observed between complementary nucleic acid bases can be realized for free-radical polymerization systems, the template polymerization of methacrylate type monomers containing nucleic acid bases in the presence of template polymers containing complementary bases was studied. Stereoregular polymers were chosen as the template polymers. The radical copolymerization of the monomers containing complementary nucleic acid bases was also studied in different solvents.     

Influence of the solvents on the γ-ray polymerization of acrylic acid. II.

The presence of plurimolecular H-bonded aggregates in the acrylic acid allows the polymer to involve some stereoregular sequences. This effect is made easier when some polymer is already formed in the reacting medium: the aggregates are stabilized by hydrogen bonds with the polymer which gives rise to a matrix effect. Two groups of solvents have been characterized by examination of the monomer's association forms in solution. In a first group of solvents (methanol–dioxan–water), the aggregates are maintained and reinforced; in the second one, acrylic acid exists only as cyclic dimers (hydrocarbons–chlorinated solvents). The difference between the association forms of the monomer involves some important modifications on the kinetics of polymerization and the structure of the obtained polymers. In the solvents of the first group, the obtained polymers are crystallizable and may involve syndiotactic sequences, while in the presence of the solvents of the second group no crystallization or stereoregularity of the polymer can occur. A very close correlation is thus found between the aggregated structure of the monomer, the polymerization kinetics, and the structure of the polymers.     

1H- and13 C-NMR Studies of Polymerization of 2,3-Dideuteromethyloxirane with Zinc Dialkoxide

The deuterium-decoupled 100 MHz ¹H-NMR spectra of 2,3-dideuteromethyloxirane and its polymer prepared with a lattice-disordered zinc dialkoxide were analyzed with consideration of the deuterium isotope effects on proton chemical shifts. The results of ¹H- and ^l3C-NMR studies indicated that the initiator for methyloxirane polymerization catalyzed by the diethylzinc-alcohol system was a lattice-disordered zinc dialkoxide, from the aspect of stereoregularity of the polymers obtained.