Thermostable Polymers Containing Phenylquinoxaline and Other Heterocyclic Units

Thermostable heterocyclic polymers containing phenyl-substituted quinoxaline and both amide and imide units have been synthesized by low-temperature solution polycondensation of diaminophenyl-quinoxalines with diacid chlorides of certain aromatic acids containing preformed imide rings. Also, copolymers have been obtained in which a mixture of diaminophenylquinoxaline and diaminooxadi-azole or diaminobenzimidazole was used in the reaction with the same diacid chlorides. The thermal stability and the electrical insulating properties of these products are discussed and compared with related heterocyclic polymers.     

Synthesis and Properties of New Polyphenylquinoxaline-imide-amides

Abstract

New thermostable polymers containing imide and phenylquinoxaline units have been prepared by solution polycondensation of diaminophenylquinoxaline coupled by ether, methylene, or sulfone linkages with diacid chlorides containing preformed imide rings. Solubility, thermal stability, and electroinsulating properties of these compounds are discussed and compared with those of related heterocyclic polymers previously reported.     

Poly(1,3,4-oxadiazole-amide)s containing pendent imide groups

A series of new poly(1,3,4-oxadiazole-amide)s containing pendent imide groups has been synthesized by solution polycondensation of aromatic diamines containing preformed 1,3,4-oxadiazole rings with two diacid chlorides containing imide rings. These polymers were also prepared by the reaction of the same diacid chlorides with p-aminobenzhydrazide which were subsequently cyclodehydrated in solid state. The polymers were soluble in polar amidic solvents and some of them gave transparent flexible films by casting from solutions. They showed high thermal stability with decomposition temperatures above 400°C and glass transition temperatures in the range of 245–327°C. They had low dielectric constants, in the range of 3.32–3.94, and good tensile properties.     

Poly(siloxaneimide)s 2. Polycondensation of some imidic diacid chlorides with aminoalkylsiloxanes

Some new poly(siloxaneimide) copolymers with good solubilities have been synthesized by solution polycondensation of aromatic diacid chlorides containing preformed imide rings with disiloxanes and siloxane oligomers having α,ω-aminopropyl functionalities. The polycondensation reactions were carried out using equimolecular amounts of the two monomers, in polar aprotic solvents and inert atmosphere.The obtained compounds were characterized by elemental C, H, and Si analysis, solubility measurements, IR and 1H-NMR spectrometry. Thermogravimetric curves were also recorded. All data agree with the proposed structures.     

COMPARED PROPERTIES OF FLUORINATED HETEROCYCLIC COPOLYIMIDES

Various new fluorinated heterocyclic copolyimides have been synthesized by a polycondensation reaction of a diacid chloride containing imide, hexafluoroisopropylidene and methylene groups with aromatic or heteroaromatic diamines containing preformed phenylquinoxaline or 1,3,4-oxadiazole rings. Other fluorinated heterocyclic copolyimides have been prepared by a polycondensation reaction of the same diacid chloride with aromatic dihydrazides, bis(o-hydroxy-amine)s or a bis(o-carboxy-amine), resulting in intermediate polyhydrazides, poly(o-hydroxy-amide)s or poly(o-carboxy-amide), respectively, which were futher cyclodehydrated to the corresponding polyoxadia zole-imide, polybenzoxazole-imide or polybenzoxazinone-imide structure. These polymers showed good solubility in polar amidic solvents, such as N-methylpyrrolidinone (NMP) and dimethylformamide (DMF), and even in less polar liquids, like tetrahydrofurane or pyridine, except for those compounds containing benzoxazole rings which were less soluble, only on heating in NMP or DMF. The weight average molecular weight measured for tetrahydrofurane-fully-soluble polymers are in the range of 12800–26700 and the polydispersity is in the range of 2–5. All these polymers exhibited good thermal stability, with decomposition temperature being above 350°C, although somewhat lower than that of related polymers prepared by using fully aromatic diacid chlorides instead of the present ones containing methylene units. The glass transition temperature is in the range of 200–300°C. The dielectric constant measured for polymer films is in the range of 3.3–3.7. Tensile strength is in the range of 35–70 MPa, elongation to break between 30–40% and tensile modulus in the range of 170–330 MPa. A study of the relation between conformational parameters and properties of some of these polymers has been carried out by using the Monte Carlo method with an allowance for hindered rotation, and the values were compared with the experimental data and discussed in relation with the rigidity of the chains. The present polymers are potential candidates for use as high performance materials.     

New poly(amide-imide) siloxane copolymers by polycondensation

Some new poly(amide-imide) siloxane copolymers have been synthesized by solution polycondensation of some aromatic diamines with siloxanic diacids having preformed imide rings. Two polycondensation techniques were used: polycondensation of aromatic diamines with diacid chlorides and direct polycondensation of aromatic diamines with diacids in the presence of organic phosphites, following the Yamazaki-Higashi phosphorylation technique. In all cases the reactions were carried out using equimolecular amounts of the two monomers, in polar aprotic solvents and inert atmosphere.The obtained compounds were characterized by elemental C, H and Si analysis, solubility tests, IR and ¹H-NMR spectrometry. Thermogravimetric curves were also recorded. All data agree with the proposed structures.     

Fluorinated poly(benzoxazole–imide)s

New poly(benzoxazole–imide)s have been prepared by polycondensation of bis(o-aminophenol)s, such as 3,3′ dihydroxybenzidine or 2,2-bis(3-amino-4-hydroxyphenyl)-hexafluoropropane, with diacid chlorides containing both imide and hexafluoroisopropylidene groups. The soluble polymer precursor resulting from the first step of polycondensation in N-methylpyrrolidinone (NMP) at low temperature was processed into thin flexible films, which were then thermally treated to reach the fully cyclized structure of poly(benzoxazole–imide)s, as observed by infrared spectra. An alternative way to produce the cyclization was by heating at reflux the solution of polymer precursor in NMP. Thermal stability, glass transition temperature, dielectric constant and its dependence on relative humidity have been studied and compared with those of related polybenzoxazoles and other heterocyclic Polymers.     

Polybenzimidazole-Ester-Imides

Thermostable heterocyclic polymers containing benzimidazole and imide rings, as well as flexible ester groups, have been synthesized by solution polycondensation of diaminobenzimidazoles with dianhydrides incorporating preformed ester linkages. The thermal stability and the electrical insulating properties of these products are discussed and compared with related heterocyclic polymers.     

New thermally stable and organosoluble heterocyclic poly(naphthaleneimide)s

As majority of polyheteroarylenes based on bis(naphthalic anhydrides), are difficult to process due to their infusiblity and insolubility in common organic solvents and solubility only in strong acids, this study is concerned with the synthesis and properties of new, easily processable polyimides and copolyimides containing naphthalene and oxadiazole rings. These polymers have been synthesized and their properties have been compared with regard to the influence of oxadiazole and naphthalene units on their physical properties. The polyimides were prepared by polycondensation reaction in solution of the aromatic diamines containing preformed oxadiazole ring with two dianhydrides having naphthalene units, at high temperature. Also, copolyimides were prepared by using a mixture of each naphthalene‐containing dianhydride, with hexafluoroisopropylidene‐dianhydride in the polycondensation reaction with the same diamino‐oxadiazoles. Most of the resulting polyimides and copolyimides were soluble in polar amidic solvents and in less polar solvents, and their solutions gave flexible films when spread onto glass plates. The thermal stability and glass transition temperature of these polyimides and copolyimides were measured and compared. The quality and the roughness of the spin‐coated films of these polymers were investigated by atomic force microscopy. The photoluminescence properties of the polymers in solution were studied to determine the color of emission. The UV absorption was also studied to determine the Stokes shift, and hence the possible reabsorption effects. The properties of the present polyimides make them attractive for applications in advanced optoelectronics and other related fields. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and properties of new polyamide-imides

Several new amide—imide polymers of good thermal stability have been synthesized by the reaction in solution of diacid chlorides with diamines containing cyclic imide linkages. Since these polymers incorporate preformed imide groups, they are not subject to some of the problems encountered in the preparation of polyimides by cyclizing polyamic acids. Their solutions in polar solvents such as dimethylacetamide are stable and will tolerate considerable proportions of hydrocarbon thinners without precipitation. Thick films can be cast from the solutions without degradation. A high-temperature cure is not needed to produce tough, flexible films. The powdered polymers can be molded readily.     

Heterocyclic polyamides containing hexafluoroisopropylidene groups

New heterocyclic polyamides have been synthesized by solution polycondensation of aromatic diamines containing phenylquinoxaline units with diacid chlorides having both imide and hexafluoroisopropylidene (6F) groups. These polymers are soluble in polar aprotic solvents, such as N-methylpyrrolidone (NMP) or N, N-dimethylformamide (DMF), and can be cast into flexible thin films from solutions. They show high thermooxidative stability with decomposition temperatures above 400°C and glass transition temperatures in the range of 225-300°C. The polymer films exhibit good chemical resistance towards diluted acids and good electrical insulating properties with dielectric constants in the range of 3.2–3.7.     

Compared properties of related aromatic poly(1,3,4-oxadiazole-amide)s

Two series of aromatic poly(1,3,4-oxadiazole-amide)s have been synthesized by low-temperature solution polycondensation reaction of equimolar amounts of aromatic diamines containing preformed oxadiazole rings with diacid chlorides having silicon or hexafluoroisopropylidene groups. These polymers are soluble in polar aprotic solvents and show high thermal stability with decomposition temperature being above 400 °C and glass transition temperature in the range of 250-350 °C. The polyoxadiazole-amides have weight- and number-average molecular weights in the range of 207 000-330 000 and 77 000-131 000, respectively. Conformational parameters of these polymers were calculated by Monte Carlo method with allowance for hindered rotation and discussed in relation with thermal properties. Polymer solutions in NMP were processed into thin free-standing films that showed good mechanical properties with tensile strength in the range of 50-100 MPa, tensile modulus in the range of 2.25-3.56 GPa and elongation to break in the range of 1.65-8.58%.     

Synthesis and thermal properties of linear aromatic poly(amidehydrazides) and corresponding poly(amide-1,3,4-oxadiazoles) and poly(1,3,4-oxadiazolyl-benzoxazoles)

Some aromatic poly(amid-hydrazides) have been synthesized by solution polycondensation at low temperature of aromatic hydrazides with aroyl dichlorides. By heating these polymers at temperatures near 300, dehydrocyclization occurs to give polymers containing the oxadiazole ring in the main chain. Their excellent thermal stability has been tested by thermogravimetric analysis. Some physical properties of these aromatic heterocyclic polymers have been reported.     

Blue fluorescent polyamides containing naphthalene and oxadiazole rings

New polyamides containing 1,3,4‐oxadiazole and naphthalene rings were prepared by low‐temperature solution polycondensation reaction of a new diamine containing preformed oxadiazole ring with various aromatic diacid chlorides. Elemental analysis, mass, infrared, and nuclear magnetic resonance spectroscopy were used to confirm the structure of the monomers and corresponding polymers. The thermal stability and glass transition temperatures of these poly(oxadiazole‐amide)s were measured and compared with those of related polymers. Their good solubility allows them to be processed in very thin films with smooth surfaces, without pinholes or cracks, when studied by atomic force microscopy. Upon irradiation with UV light the polymers showed photoluminescence maxima in the blue spectral range, both in solution and in solid state. Cyclic voltammetry (CV) was performed in order to obtain information about the electrochemical stability and reversibility of the redox processes of these polyamides. The highest occupied molecular orbital and the lowest unoccupied molecular orbital energy levels, and electrochemical and optical band gap values were calculated by using the results of CV and UV/vis, respectively, showing very good electron and hole injection and transport characteristics. These properties make the present polymers suitable for application in electroluminescent devices. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Aromatic polyimide-co-amides. I

A series of aromatic polyimide-co-amides of high thermal stability were synthesized. Low-temperature solution condensation involving aromatic diamines of varying basicity and bifunctional carboxylic acid chlorides containing performed imide rings was empolyed. This approach offers several advantages over the conventional polyamic acid route. The final polymers obtained are linear, soluble, and of high molecular weight. Solution of the final polymers are stable in contrast to polyamic acid solutions, which depolymerize hydrolytically due to the neighboring-group effect. Tough, flexible films were cast from solution and required no heat cure. The properties of one polymer made by the preformed ring approach were compared to its structurally related amide and imide homologs.     

Synthesis and characterization of soluble polyimides derived from 2,2′‐Bis(3,4‐dicarboxyphenoxy)‐9,9′‐spirobifluorene dianhydride

The synthesis of aromatic poly(ether imide)s containing spirobifluorene units in the polymer backbone is described. 2,2′‐Bis(3,4‐dicarboxyphenoxy)‐9,9′‐spirobifluorene dianhydride, which was used as a new monomer, was synthesized with 2,2′‐dihydroxy‐9,9′‐spirobifluorene as the starting material. In the spiro‐segment, the rings of the connected bifluorene were orthogonally arranged. This bis(ether anhydride) monomer was employed in reactions with a variety of aromatic diamines to furnish poly(ether imide)s, involving an initial ring‐opening polycondensation and subsequent chemically induced cyclodehydration. Excellent solubility in common organic solvents at room temperature, good optical transparency, and high thermal stability are the prominent characteristic features of these new polymers, which can be attributed to the presence of spiro‐fused orthogonal bifluorene segments along the polymer chain. The glass‐transition temperatures of the polyimides were 240–293 °C, and the 5% weight‐loss temperatures were greater than 500 °C. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 262–268, 2002     

Polymers containing phenylquinoxaline rings

The synthesis and properties of poly(phenylquinoxalines) containing hexafluoroisopropylidene or silylene units in the backbone are described. The polymers have been prepared by polycondensation of aromatic diamines containing preformed phenylquinoxaline rings with a dianhydride or diacid chlorides containing hexafluoroisopropylidene groups, or with a dianhydride or diacid chlorides containing silylene units. The solubility, thermal stability, film forming ability, and electric insulating, mechanical, and electroluminescent properties of the thin films are discussed and compared with those of related heterocyclic polymers. Potential applications of poly(phenylquinoxalines) are outlined.Based on the report presented at the International Conference Modern Trends in Organoelement and Polymer Chemistry dedicated to the 50th anniversary of the A. N. Nesmeyanov Institute of Organoelement Compounds of the Russian Academy of Sciences (Moscow, May 30–June 4, 2004).Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1739–1748, September, 2004.     

Benzheterocycle–imide and amide–imide fibers derived from diacid chlorides containing preformed imide groups

Fibers of benzoxazole–imide ordered copolymers were prepared by cyclodehydrating the amide–phenol units of precursor polyamide–o-hydroxyimide fibers at 375°C in nitrogen. The precursor polyamide–o-hydroxyimides were obtained by the reaction of 3,3′-dihydroxybenzidine with diacid chlorides containing preformed imide rings. The benzoxazole–imide fibers are very thermally stable, especially with respect to retention of tensile properties after heat aging in air. For example, the benzoxazole–imide fibers after heating aging in air for 35 days retained 75% or more of their original tenacities and 50% or more of their original elongations to break. The original fibers did not have high tenacities, probably because of the rather extreme thermal treatment required to cyclodehydrate the amide–phenol units of the precursor fiber. The ultraviolet light stability of one benzoxazole–imide fiber was outstanding for a fiber of the polyheterocycle type: there was no loss in strength or elongation after 140 hr of exposure in a Fade-Ometer. Fibers of ordered amide–imide polymers based on the same imide-containing diacid chlorides used for the benzoxazole–imide polymers were also prepared. They were substantially less thermally stable than their benzoxazole–imide fiber counterparts, as expected.     

Copoly(peryleneimide)s containing 1,3,4‐oxadiazole rings: Synthesis and properties

New copolyimides containing perylenediimide, oxadiazole and hexafluoroisopropylidene moieties were prepared by one‐step polycondensation reaction in solution at high temperature of aromatic diamines containing preformed oxadiazole ring with a mixture of a dianhydride having a perylene ring and another dianhydride with hexafluoroisopropylidene unit. The thermal stability and glass transition temperatures of these copolyimides were measured and compared with those of related polyimides. The solid polymers were also studied by polarized light microscopy and X‐ray diffraction which revealed a semicrystalline state consisting of face‐to‐face arranged columns of perylenediimide units. The film‐forming ability and properties of the resulting thin films were investigated by using atom force microscopy and scanning electron microscopy which showed that the films were organized into self‐assembled rod‐like structures. The UV‐Vis and photoluminescence properties in solution and in solid state were also investigated. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4230–4242, 2010     

New silicon-containing heterocyclic polyimides

New aromatic polyimides and polyamide-imides with phenylquinoxaline rings and dimethylsilane units have been synthesized by solution polycondensation reaction of aromatic diamines containing phenylquinoxaline units with bis(3,4-dicarboxyphenyl)-dimethylsilane dianhydride, or with a diacid chloride resulting from the reaction of this dianhydride with p-aminobenzoic acid. These polymers were easily soluble in organic solvents, such as N-methylpyrrolidinone and dimethylacetamide, and showed high thermal stability with decomposition temperature being above 440°C and glass transition temperature in the range of 245-285°C. Very thin coatings were deposited from polymer solutions onto silicon wafers and exhibited smooth, pinhole-free surface in atomic force microscopy investigations. Some of these polymers showed blue fluorescence in solution and films, with a maximum in the range of 415-425 nm.