Organo-rhodium(I) complexes containing mono and bidentate N-heterocycles

Complexes of the type [Rh(diolefin)(μ-X)]₂ [X = Cl or Br; diolefin = cod (cycloocta-1,5-diene) or nbd (norbornadiene)] undergo dihalobridge cleavage with 2-substituted benzimidazoles to produce mononuclear complexes, RhX(diolefin)(R-BzlH) (R = α-Py or Ph), and N-heterocycle bridged dimers, [RhX(diolefin)]₂(μ-N–N) (N–N = β-PyBzlH or γ-PyBzlH). Facile replacement ofone or both diolefins by CO occurs in the products to yield the corresponding di/tetracarbonyl complexes. Probable structures have been proposed for the complexes on the basis of physical, i.r., far-i.r. and ¹H- and ¹³C-n.m.r. spectral techniques and FAB-MS. This revised version was published online in June 2006 with corrections to the Cover Date.     

Ruthenium complex-catalyzed allylic alkylation of carbonucleophiles with allylic carbonates

Allylic carbonates except for allyl methyl carbonate reacted with carbonucleophiles such as ethyl acetoacetate in the presence of a catalytic amount of Ru(cod)(cot) [cod = cycloocta-1,5-diene, COT = cycloocta-1,3,5-triene] in N-methylpiperidine at 80°C to give the corresponding monoallylated carbonucleophiles in high yields with high regioselectivity. The regioselectivity was quite different from that in the palladium-catalyzed reactions. The allylation of carbonucleophiles using allyl methyl carbonate selectively gave the diallylated carbonucleophiles in high yields.     

Substitutions of organopalladium(II) species with benzimidazole derivatives

The [Pd(cod)(cotl)]ClO₄ complex (cod = cycloocta-1,5-diene; cotl = cyclooctenyl, C₁₈H₁₃ ^–) undergoes substitutions with new Schiff base ligands containing benzimidazole L [L = 2-(2-N-n-propylidenephenyl)benzimidazole (L¹); 2-(2-N-i-propylidenephenyl)benzimidazole (L²); 2-(2-N-n-butylidenephenyl)benzimidazole (L³); 2-(2-N-i-butylidenephenyl)benzimidazole (L⁴)]. Facile displacement of cod by L occurs to produce complexes of the type [Pd(cotl)L]ClO₄· nMe₂CO (n= 0; L = L¹, L² or L³; n= 2, L = L⁴). Dihalobridge complexes of the type [Pd(cotl)X]₂(X = Cl or Br) undergo halogen-bridge cleavage with L¹–L⁴ to give mononuclear complexes of the type Pd(cotl)LX · nH₂O (n= 2, X = Cl, L = L¹; n= 0, X = Br, L = L¹; n= 0, X = Cl, L = L²; n= 0, X = Cl or Br, L = L³; n= 0, X = Cl, L = L⁴; n= 2, X = Br, L = L⁴) and a binuclear complex [Pd(cotl)Br]₂L². The complexes were characterised by physical properties, i.r., ¹H- and ¹³C-n.m.r. spectral techniques and by mass spectra. Probable structures have been proposed.     

The influence of the ligands on the catalytic activity of a series of RhI complexes in reactions with phenylacetylene: Synthesis of stereoregular poly(phenyl) acetylene

The catalytic activity of a series of [Rh L-L chel]X complexes, in which we have varied the unsaturated ligand [L-L = cis, cis-cycloocta 1,5-diene(cod) or 2,5-norbornadiene(nbd) the nitrogen chelating ligand [chel = 2,2′-bipyridine(bipy), 2,2′-dipyridylamine(dipyam), 2,2′-bipyrazine (bipz), 4,4′-dimethyl-2,2′-bipyridine (4,4′-Me₂bipy)] and the counter ion [X = PF₆, ClO₄, BPh₄], has been examined in reactions with phyenylacetylene (PA). The catalytic behaviour of the [Rh(cod)Cl₂],tmeda (tmeda = N,N,N′,N′tetramethylethylendiamine), [Rh(cod)Cl₂],teda] (teda = triethylendiamine), of the dimer [Rh(cod)Cl]₂, and the use of NaOH as cocatalyst in different reaction conditions was also examined. The influence of the ligands on the catalytic activity of these Rh^I complexes is discussed. ¹H and ¹³C NMR spectra have shown that highly stereoregular polyphenylacetilene can be obtained. Conditions for homogeneous doping of PPA, to obtain materials whose conductivity varies over 10–11 magnitude orders, are proposed. The stability of the doped polymers is also discussed.     

New monomers and polymers : by Bill M. Culbertson and Charles U. Pittman,Jr., Plenum Press,New York and London, 1984, xi + 494 pages,US$59.50.ISBN 0-306-41477-5.

¹H and ¹³C NMR spectra have shown that the products of the reactions of [RuH(cycloocta-1,5-diene)L₃]⁺ (I, L = PMe₂h) with 1,3-dienes are η³-enyl species and not hydrido(1,3-diene) complexes as inferred previously; similar complexes, with phosphine ligands other than PMe₂Ph, have been prepared.     

Site-selective and stepwise complexation of two M(cod)+ (M = Rh,Ir) fragments with calix[4]arene

The reaction of [(cod)M(mu-OMe)]2 (M = Rh, Ir; cod = cycloocta-1,5-diene) with calix[4]arenes (LH4) in the molar ratio of 0.5-0.6:1 gave the rhodium and iridium pi-arene complexes [(cod)M(eta 6-LH3)], while that in the molar ratio of 1.1-1.5:1 (M = Rh) led to the selective formation of the dinuclear complexes [((cod)Rh)2(eta 6:eta 2-LH2)] in which one of the Rh(cod)+ fragments is coordinated by an eta 6-aryl group and the other by two phenolic oxygen atoms; the stepwise synthesis of the Rh-Ir heterobimetallic analogue of the latter complex was further achieved.     

Inclusion complexes with cyclodextrin and usnic acid

Molecular inclusion complexes of usnic acid (UA) with β-cyclodextrin (β-CD) and 2-hydroxypropyl β-cyclodextrin (HP β-CD) were prepared by the co-precipitation method in the solid state in the molar ratio of 1:1. Structural complexes characterization was based on different methods, FTIR, ¹H NMR, XRD and DSC. Parallel to the complex by the above methods, corresponding physical mixtures of UA with cyclodextrins and complexing agents (β-CD, HP β-CD and UA) were analyzed. The results of DSC analysis showed that, at around 200 °C, the endothermal peak in the complexes with cyclodextrins originating from the UA melting has disappeared. Complex diffractogram patterns do not contain peaks characteristic for the pure UA. They are more appropriate to cyclodextrin diffractogram. This fact points to the molecular encapsulation of UA in the cyclodextrin cavity. Chemical shifts in ¹H NMR spectra after the inclusion of UA into the cyclodextrin cavity, especially H-3 protons (0.0012 and 0.0102 ppm in the β-CD and HP β-CD, respectively) and H-5 and H-6 (0.0134 ppm) and hydrogen from CH₃ (0.0073 ppm) HP β-CD also points to the formation of molecular inclusion complexes. The improved solubility of UA in water was achieved by molecular incapsulation. In the complex with β-CD the solubility is 0.3 mg/cm³, with HP β-CD 4.2 mg/cm³ while the uncomplexed UA solubility is 0.06 mg/cm³. The microbial activity of UA and both complexes was tested against eight bacteria and two fungi and during the test no reduced activity of UA in the complexes was observed.     

Polymerization of phenylacetylene by iridium catalysts

Polymerization of phenylacetylene (PA) with [(cod)IrCl]₂‐based catalysts (cod: 1,5‐cyclooctadiene) was examined. The [(cod)IrCl]₂/n‐BuLi and [(cod)IrCl]₂/Ph₂C?C(Ph)Li systems induced the polymerization of PA to produce polymers with a number‐average molecular weight (M_n) of around several thousand in rather low yields. On the other hand, the catalyst composed of [(cod)IrCl]₂, norbornadiene (nbd), Ph₃P, and Ph₂C?C(Ph)Li (molar ratio of 1:1:1.1:2) produced polymer in a high yield (ca. 80%) in toluene at 0 °C. The resulting polymer showed a bimodal gel permeation chromatographic profile (M_n = 209,000 and 4300; ratio: 81/19). On the basis of these findings, the presence of two active species, that is, Ir complexes with nbd and cod, are discussed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1075–1080, 2002     

(η6-Arene)(η4-cycloocta-1,5-diene)ruthenium(0) complexes as homogeneous hydrogenation catalysts

Ru(η⁶-arene)(η⁴-COD) complexes (COD = cycloocta-1,5-diene) have been found to be catalytic precursors for the homogeneous hydrogenation of α-olefins and cycloolefins under mild conditions (room temperature, P(H₂) 1–20 atm).     

Aminophosphine ligands: synthesis,coordination chemistry,and activity of their palladium(II) complexes in Heck and Suzuki cross-coupling reactions

The reaction of 4-aminodiphenylamine or 2-aminofluorene with two equivalents of PPh₂Cl in the presence of Et₃N gives new bis(diphenylphosphino)amines N,N-bis(diphenylphosphino)-4-aminodiphenylamine 1 and N,N-bis(diphenylphosphino)-2-aminofluorene 2 in good yields. Oxidation of 1 or 2 with hydrogen peroxide, elemental sulfur or gray selenium affords the corresponding chalcogen derivatives. The palladium and platinum complexes of these P–N–P donor ligands were prepared by the reaction of the bis(phosphino)amines with MCl₂(cod) (M = Pd or Pt, cod = cycloocta-1,5-diene). All the new compounds have been characterized by analytical and spectroscopic methods, including ¹H-³¹P NMR, ¹H-¹³C HETCOR, or ¹H-¹H COSY correlation experiments. The Pd(II) complexes were investigated as catalysts in the Suzuki and Heck reactions; both showed good catalytic activity affording high yields of the desired products.     

Transformations of phosphazane ligands in the coordination sphere of transition metals. Reactions of phosphinotriazene Ph<Subscript>2</Subscript>P-N(Ph)-N=NPh with Ni<Superscript>0</Superscript> and Ni<Superscript>I</Superscript> complexes

3-(Diphenylphosphino)-1,3-diphenyltriazene Ph₂P-NPh-N=NPh was synthesized. The reactions of this compound with bis(cycloocta-1,5-diene)nickel, (cod)₂Ni, and nickel(I) bis(triphenylphosphino)bis(trimethylsilyl)amide, (Ph₃P)₂Ni-N(SiMe₃)₂, afforded the anionic nickel complex [Ph₄P]⁺[Ni(PhNNNPh)₃]⁻ in 15 and 78% yields, respectively. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1585–1589, July, 2005.     

A new synthesis for thermolabile low-valent palladium complexes by electron transfer reactions from nickel(0) to palladium(II) compounds

The nickel(0) complex [Ni(bpy)(cod)] (bpy: 2,2′-bipyridine, cod: cycloocta-1,5-diene) was used as a mild reducing reagent for the synthesis of the extremely reactive low-valent palladium complexes [Pd₂X₂(cod)₂] (1: X = Cl, 2: X = Br), Pd(cod)₂ (3) and Pd(norbornene)₃ (4). The X-ray analysis of 1 showed that the two [Pd(cod)(Cl)] moieties are only connected by a short Pd(I)-Pd(I) bond (bond length: 2.5379(4) Å) with the chloride ions as monodentate ligands. The X-ray structure of 3 which is also known to be an extremely reactive compound could be determined by X-ray diffraction. As expected, the Pd(0) centre is surrounded by the two cod ligands to form a PdC₄ tetrahedron with typical Pd-C bond lengths. The crystal structure of 3 shows it to be very similar to the closely related complexes M(cod)₂ (M: Ni, Pt). The X-ray structure of 4 displays that the Pd(0) centre is in a trigonal planar environment of the three olefin groups. According to ¹H NMR measurements the complexes have the same structure in solution as found in the solid state.     

Polymerization of 3‐ethynylthiophene with homogeneous and heterogeneous Rh catalysts

3‐Ethynylthiophene (3ETh) was polymerized with Rh(I) complexes: [Rh(cod)acac], [Rh(nbd)acac], [Rh(cod)Cl]₂, and [Rh(nbd)Cl]₂ (cod is η²:η²‐cycloocta‐1,5‐diene and nbd η²:η²‐norborna‐2,5‐diene), used as homogeneous catalysts and with the last two complexes anchored on mesoporous polybenzimidazole (PBI) beads: [Rh(cod)Cl]₂/PBI and [Rh(nbd)Cl]₂/PBI used as heterogeneous catalysts. All tested catalyst systems give high‐cis poly(3ETh). In situ NMR study of homogeneous polymerizations induced with [Rh(cod)acac] and [Rh(nbd)acac] complexes has revealed: (i) a transformation of acac ligands into free acetylacetone (Hacac) occurring since the early stage of polymerization, which suggests that this reaction is part of the initiation, (ii) that the initiation is rather slow in both of these polymerization systems, and (iii) a release of cod ligand from [Rh(cod)acac] complex but no release of nbd ligand from [Rh(nbd)acac] complex during the polymerization. The stability of diene ligand binding to Rh‐atom in [Rh(diene)acac] catalysts remarkably affects only the molecular weight but not the yield of poly(3ETh). The heterogeneous catalyst systems also provide high‐cis poly(3ETh), which is of very low contamination with catalyst residues since a leaching of anchored Rh complexes is negligible. The course of heterogeneous polymerizations is somewhat affected by limitations arising from the diffusion of monomer inside catalyst beads. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2776–2787, 2008     

The Reaction of the Betain‐like Compound O2C2(PPh3)2 with [(cod)PtI2] – Crystal Structure of the Salt (HC{PPh3}2)[(η3‐C8H11)PtI2]

The reaction of the betain‐like compound O₂C₂(PPh₃)₂ ( 1 ) with [(cod)PtX₂] in THF solution gives the salt‐like compounds (HC{PPh₃}₂)[(η³‐C₈H₁₁)PtX₂] ( 3 , X = I; 4 , X = Cl) in about quantitative yields. The new η³‐bonded C₈H₁₁ ligand is the result of a proton transfer from the coordinated cod ligand to 1 with subsequent release of CO₂. The X‐ray analysis of 3 shows the presence of two isomers in a 60:40 ratio, which differ in the bonding of the C₈H₁₁ ligand. 3 crystallizes in the triclinic space group with the unit cell dimensions a = 1091.7(1), b = 1141.5(1), c = 1649.4(2) pm; α = 80.34(1)°, β = 83.62(1)°, γ = 89.03(1)°, V = 2013.7(4)·10⁶ pm³, Z = 2.     

The preparation and some reactions of chloro(η4-cycloocta-1,5-diene)(η5-cyclopentadienyl)ruthenium(II): A versatile,new synthetic precursor for cyclopentadienylruthenium(II) chemistry

Facile substitution of the cyclooctadiene and/or chloro ligands in [(η⁵-C₅H₅)Ru(C₈H₁₂Cl] (C₈H₁₂ = cycloocta-1,5-diene) under mild reaction conditions provides high yield synthetic routes to a range of new neutral and cationic cyclopentadienylruthenium(II) complexes.     

Neutral molecular Pd6 hexagons using kappa3-P2O-terdentate ligands

The one-step synthesis of three new P2O-terdentate carboxylic acid ditertiary phosphines 2-{(Ph2PCH2)2N}-3-(X)C6H3CO2H (X = OCH3, L1; X = OH, L2) and 2-{(Ph2PCH2)2N}-5-(OH)C6H3CO2H (L3) by a phosphorus-based Mannich condensation reaction using Ph2PCH2OH and the appropriate amine in CH3OH is reported. Compounds L1-L3 function as typical kappa2-P2-didentate ligands upon complexation to Pd(CH3)Cl(cod) (cod = cycloocta-1,5-diene), affording the neutral, mononuclear complexes Pd(CH3)Cl(L1-L3) (1-3). Metathesis of 1 with NaX (X = Br, I) gave the corresponding (methyl)bromopalladium(II) (4) and (methyl)iodopalladium(II) (5) complexes, respectively. When chloroform or chloroform/methanol solutions of 1-3 (or 5) were allowed to stand, at ambient temperatures, yellow crystalline solids were isolated in very high yields (71-88%) and were analyzed for the novel hexameric palladium(II) compounds 6-9. All new compounds reported have been fully characterized by a combination of spectroscopic (multinuclear NMR, Fourier transform IR, electrospray mass spectrometry, matrix-assisted laser desorption ionization time-of-flight mass spectrometry) and analytical methods. The self-assembly reactions are remarkably clean as monitored by 31P{1H} and 1H NMR spectroscopy. Single-crystal X-ray structures have been determined for L1, 4, 7.17CDCl3.2Et2O, 8.6CHCl3.8CH3OH, and 9.17CDCl3. In hexamers 7-9, all six square-planar palladium(II) metal centers comprise a kappa2-P2-chelating diphosphine, a kappa1-O-monodentate carboxylate, and either a chloride or iodide ligand, leading to 48-membered metallomacrocycles (with outside diameters of ca. 2.5 nm). Whereas only intramolecular O-H...N hydrogen bonding between the hydroxy group and tertiary amine has been observed in 7, strong intermolecular O-H...O hydrogen bonding of the type CO...HO(CH3)...HO, involving a methanol solvate, has been found in 8, leading to an unprecedented three-dimensional network motif.     

Rh NMR studies of organometallic rhodium(I) derivatives

Organometallic rhodium(I) derivatives have been studied by ¹⁰³Rh NMR. The chemical shift range extends from 609 ppm ([Rh.cp.cod]) to 2714.7 ppm ([Rh.fod.cod]). These results are supported by ¹³C and ³¹P NMR results, and give information about the bonding in these derivatives. Most of the complexes contain the cycloocta-1,5-diene ligand. For these complexes a linear correlation is observed between δRh and δC (olefinic carbons) (27 points, R = 0.960). For the phosphine derivatives a linear correlation is found between δRh and ¹J(RhP) and, also, between δRh and parameters characterizing the basicity of the phosphine ligand. The correlation of δRh with ligand properties has been extended to a wider range of complexes by using the ‘influence parameters’ defined previously (10 points, R = 0.947). The sensitivity of δRh to steric factors is also proved.     

Syntheses Characterization of Chloro-cyclopentadienyltricarbonyl-molybdenum with β-Cyclodextrin Supramolecular

Organotransition metal complex have been extensively used as homogeneous catalysts in organic reactions and much effort has been paid to improve their activity and selectively. Cyclodextrins have been studied as a model of enzyme for selective catalysis. However, so far there are only a few reports on the inclusion compounds of organometallic complexes with cyclodextrins. Breslow et al.repored high acylation rates for β-CD using ferrocene derivatives and assumed β-CD substrate complexes as intermediate [1]..larad et al reported the preparation and propertics of cyclodextrin-ferrocen inclusion compounds as the first example of cyclodextrin inclusion compounds of organotransition metal complexes[2]. Song Le-Xin et al reported the supramolecular inclusion compound of β-cyclodextrin with cyclopentadieny-tricarbonylmanganese [3] .To our knowledge, there are no reports of inclusion compounds of β-CD with molybdenum organometallic complexes. In the present work we described the preparation and properties of the supramolecular of CpMo(CO)3Cl with β-CD in details.     

Substituted imidazole complexes of platinum(IV) halides

Platinum(IV) halides formed complexes of the type PtL₂X₄ [L=1-vinyl imidazole (1,-VIm), 1-methylimidazole (1-MeIm), 1,2-dimethylimidazole (1,2-Me₂Im), 1-vinyl-2-methylimidazole (1-V-2-MeIm), 2-methylimidazole (2-MeIm), 2-ethylimidazole (2-EtIm), 2-isopropylimidazole (2-i-PrIm), and 4-methylimidazole (4-MeIm); X=Cl, Br] in neutral aqueous solution. The 1-n-butylimidazole (1-n-BuIm) ligand yielded only (LH)₂PtX₆ compound in the same medium. The compounds were characterised by elemental analyses, IR, UV-VIS and ¹HNMR spectra.     

The synthesis of the zero-valent nickel complexes via di-π-allylnickel

A new route to zero-valent nickel complexes, (cycloocta-1,5-diene)duroquinonenickel, (endo-dicyclopentadiene)duroquinonenickel, dicycloocta-1,5-dienenickel and bis(tetracyclone)nickel, as described. The synthetic procedure involves the reaction between di-π-allylnickel and duroquinone, cyclic dienes, or tetraphenylcyclopentadienone. The replacement of the π-allyl ligand with duroquinone or a cyclic diene is suggested to follow the associative mechanism. The ¹³C NMR and mass spectra of the compounds isolated are reported.