Polymerization of Methyl Methacrylate in the Presence of Imidazole Derivatives. Kinetics and Polymer Structure

The kinetics of the polymerization of methyl methacrylate (MMA) in the presence of imidazole (Im), 2-methylimidazole (2MIm), or benz-imidazole (BIm) in tetrahydrofuran (THF) at 15–40°C was investigated by dilatometry. The rate of polymerization, R_p , was expressed by R_p = k[Im] [MMA]², where k = 3.0 × 10^?6 L²/(mol² s) in THF at 30°C. The overall activation energy, E_a , was 6.9 kcal/mol for the Im system and 7.3 kcal/mol for the 2MIm system. The relation between logR_p and 1 T was not linear for the BIm system. The polymers obtained were soluble in acetone, chloroform, benzene, and THF. The melting points of the polymers were in the range of 258–280°C. The ¹H-NMR spectra indicated that the polymers were made up of about 58–72% of syndiotactic structure. The polymerization mechanism is discussed on the basis of these results.     

Vinyl Polymerization. 269. Polymerization of Methyl Methacrylate Initiated by p,p'-Dimethoxydiphenyldiazomethane

Using p,p'-dimethoxydiphenyldiazomethane (DMDM) as initiator, the polymerization of methyl methacrylate (MMA) in benzene or in bulk was carried out. The initial rate of polymerization, R_p, was found to be expressed by the following equation:

R_p = k[DMDM]^0.53 [MMA]^0.84

The polymerization was confirmed to proceed by a radical mechanism. The over-all activation energy for the polymerization in benzene was calculated as 19.3 kcal/mole. The rate of thermal decomposition of DMDM was also measured in benzene and the rate equation was obtained as follows:

k_d (sec^?1) = 1.0 × 10¹⁵ exp (^?29.1 kcal/RT) (for 50-80°C)

Explanations of these observations are discussed in connection with those of the preceding papers.     

Polymerizabilities of Several Polar Vinyl Monomers by Imidazole

Polymerizabilities of several polar vinyl monomers in the presence of imidazole (Im) have been studied in CDC1₃ and CD₃OD by NMR spectra. Acrylic acid formed a bimolecular adduct with Im as the initial adduct, while methacrylic acid was not obtained, On the other hand, methyl acrylate, methyl methacrylate (MMA), acrylamide (AAm), and acrylonitrile formed the initial adduct between Im and monomer, respectively. In these monomers, AAm and MMA gave each polymer in tetrahydrofuranat room temperature. The number-average molecular weight ([Mbar]_n) of AAm polymers was determined to be in the range of 1000 to 1500, and the [Mbar]_n of MMA polymers was found to be in the range of 2500 to 4500, The rate of polymerization R_p was expressed by the equations R_p = k[Im][AAm] and R_p = k[Im] [MMA]², respectively. The activation energy E_R was obtained by Arrheniuss's plots as E_R(AAm) = 9.6 kcal/mol and E_R(MMA) = 3.8 kcal/mol. These polymerization mechanisms are discussed on the basis of these results.     

Study on the Kinetics of Polymerization of Tributyltin Methacrylate

The kinetics of polymerization of tributyltin methacrylate (TBTM) has been studied in benzene solution in the temperature range 60–75°C in the presence of azobisisobutyronitrile (AIBN). We have obtained the following polymerization rate equation: R _p = K _p [TBTM]^1.5 [AIBN]^0.5. It shows that the dependence of the polymerization rate on the concentrations of the monomer TBTM and the initiator AIBN are 1.5 and 0.5 order, respectively. The activation energy of polymerization was found to be 18.1 kcal/mol. The activation energy for the degree of polymerization is approximately -12.3 kcal/mol.     

SYNTHESIS AND POLYMERIZATION OF ALIPHATIC TERTIARY AMINO-GROUP N-SUBSTITUTED ACRYLAMIDES

Aliphatic tertiary amino-group N-substituted acrylamides, N-acryl-N′-methylpiperazine (AMP)and N-methacryl-N′-methylpiperazine (MAMP) were synthesized directly from N-methylpiperazinewith corresponding acryloyl chlorides and characterized by elementary analysis of their picrates,~1H-NMR, IR and MS. AMP did not polymerize with benzoyl peroxide (BPO), but could poly-merize with lauroyl peroxide (LPO). The rate equation of the polymerization was given as R_P=K_P [AMP]~(1.5)[LPO]~(0.5) and the overall activation energy of this polymerization system was 10.8Kcal/mol. The redox nature of LPO with the monomer itself was suggested. Even though AMP and MAMP hardly proceed the polymerization initiated with BPO, butunder lower concentration would form redox system with BPO to initiate the polymerization of MMAreadily. The rate equation of the polymerization of MMA initiated with MAMP-BPO systemwas given as R_P=K_P [MMA] [MAMP}~(0.5) [BPO]~(0.5) and the overall activation energy was 10.2Kcal/mol. The analysis of the obtained polymers confirmed that MAMP not only initiated the poly-merization of MMA by combining with BPO, but also took part in the polymer chains impartingthem with better biocompatibility.     

Effect of metal salts on polymerization. Part I. Polymerization of vinylpyridine initiated with cupric acetate

The polymerization of vinylpyridine initiated by cupric acetate has been studied. The rate of polymerization was greatly affected by the nature of the solvent. In general polar solvents increased the rate of polymerization. Polymerization was particularly rapid in water, acetone, and methanol. The initial rate of polymerization of 4-vinylpyridine (4-VP) in a methanol–pyridine mixture at 50°C. is R_p = 6.95 × 10^?6[Cu¹¹]^1/2 [4-VP]² l./mole-sec. The activation energy of initiation by cupric acetate is 5.4 ± 1.6 kcal./mole. Polymerization of 2-vinylpyridine and 2-methyl-5-vinylpyridine with the same initiator was much slower than that of 4-VP. Dependence of R_p on monomer structure and solvent is discussed. Kinetic and spectroscopic studies led to the conclusion that the polymerization of 4-VP is initiated by one electron transfer from the monomer to cupric acetate in a complex having the structure, (4-VP)₂Cu(CH₃COO)₂.     

Metal chelates in vinyl polymerization: Kinetics and mechanism of acrylonitrile polymerization initiated by Cu(II) imine complexes

The free radical polymerization of acrylonitrile (AN) initiated by Cu(II) 4-anilino 2-one [Cu(II) ANIPO] Cu(II), 4-p-toluedeno 3-pentene 2-one [Cu(II) TPO], and Cu(II) 4-p-nitroanilino 3-pentene 2-one [Cu(II) NAPO] was studied in benzene at 50 and 60°C and in carbon tetrachloride (CCl₄), dimethyl sulfoxide (DMSO), and methanol (MeOH) at 60°C. Although the polymerization proceeded in a heterogeneous phase, it followed the kinetics of a homogeneous process. The monomer exponents were ≥2 at two different temperatures and in different solvents. The square-root dependence of R_p on initiator concentration and higher monomer exponents accounted for a 1:2 complex formation between the chelate and monomer. The complex formation was shown by ultraviolet (UV) study. The activation energies, kinetics, and chain transfer constants were also evaluated.     

Vinyl polymerization. Part 268. Polymerization of acrylonitrile initiated by the system of tetramethyl tetrazene and bromoacetic acid

The polymerization of acrylonitrile (AN) initiated by the system of tetramethyl tetrazene (TMT) and bromoacetic acid (BA) in dimethylformamide (DMF) was studied. The TMT–BA system could initiate the polymerization of AN more easily than TMT alone. The polymerization was confirmed to proceed through a radical mechanism. The initial rate of polymerization R_p was expressed by the equation: R_p = [TMT]^0.62-[BA]^0.5[AN]^1.5. The overall activation energy for the polymerization was estimated as 9.4 kcal/mole. In the absence of monomer, the reaction of TMT with BA in DMF was also studied kinetically by measuring the evolution of nitrogen gas. The reaction was first-order in TMT and first-order in BA; the rate data at 49°C were k₂ = 9.1 × 10^?2l./mole-sec., ΔH? = 17.0 kcal/mole, and ΔS? = ? 6.6 eu. In addition, the treatment of TMT with BA in benzene led to the formation of tetramethylhydrazine radical cation, which was identified by its ESR spectrum. On the other hand, the relatively strong interaction between TMT and DMF was observed by absorption spectrophotometry.     

Polymerization of Methyl Methacrylate with Bis(Cyclopentadienyl)Titanium Dichloride in a Water-Methanol Mixture: Formation of Tetrahydrofuran-Insoluble Polymer

Abstract

Methyl methacrylate (MMA) was found to be effectively polymerized with bis(cyclopentadienyl)titanium dichloride (CP₂TiCl₂) in a water-methanol mixture (1:1, v/v). The polymerization proceeded heterogeneously because the resulting poly(MMA) was insoluble in the system. The rate (R _p) of the heterogenous polymerization was apparently expressed by R _p = k[Cp₂TiCl₂]²[MMA]^2˙5 (at 40°C). The resulting poly(MMA) was observed to consist of tetrahydrofuran (THF)-soluble and insoluble parts. In contrast with the usual radical poly(MMA), the THF-insoluble part was soluble in benzene, toluene, and chloroform but insoluble in polar solvents such as ethyl acetate, acetone, acetonitrile, dimethylformamide, and dimethylsulfoxide. The polymerization was found to be profoundly accelerated by irradiation with a fluorescent room lamp (15 W). The results of copolymerization of MMA and acrylonitrile indicated that the present polymerization proceeds through a radical mechanism.     

Sulfur-Containing Vinyl Monomers. XV. Kinetic Study of Radical Polymerization of Vinyl Mercaptobenzothiazole and Its Copolymerization

A kinetic study of radical polymerization of vinyl mercaptobenzothiazole (VMBT) with α,α′-azobisisobutyonitrile (AIBN) at 60°C was carried out. The rate of polymerization (R_p) was found to be expressed by the rate equation: R_p = k[AIBN]^0.5 [VMBT]^1.0, indicating that the polymerization of this monomer proceeds via an ordinary radical mechanism. The apparent activation energy for overall polymerization was calculated to be 20.9 kcal/mole. Moreover, this monomer was copolymerized with methyl methacrylate, acrylonitrile, vinyl acetate, phenyl vinyl sulfide, maleic anhydride, and fumaronitrile at 60°C. From the results obtained, the copolymerization parameters were determined and discussed.     

The use of ylide (4-picolinium 4-chloro phenacyl methylide) as an initiator for the polymerization of methyl methacrylate

The thermal polymerization of methyl methacrylate [MMA] was carried out using ylide (4-picolinium 4-chloro phenacyl methylide) as an initiator. The rate of polymerization (R_p) increases with increasing monomer and initiator concentrations; The exponent value has been computed to be 1 ± 0.02 and 0.5, respectively. The reaction was carried out at four different temperatures and the overall activation energy has been computed to be 16.01 kcal/mol. The polymerization was inhibited in the presence of hydroquinone as a radical scavanger. Kinetic studies indicates that the overall polymerization takes place by a radical mechanism.     

Polymerization of Acrylonitrile Initiated by the System Tetramethyl-2-tetrazene and p-Toluenesulfonic Acid

The polymerization of acrylonitrile (AN) initiated by tetramethyl-2-tetrazene (TMT) and p-toluenesulfonic acid (TSA) in dimethylformamide (DMF) was studied. The polymerization was confirmed to proceed through a radical mechanism. The initial rate of polymerization R was expressed by the equation: R_p = k[TMT]^0.6 [TSA]^0.46 [AN]^1.35. The overall activation energy for the polymerization was estimated as 20.7 kcal/mole. In the absence of monomer, the reaction of TMT with TSA was also studied kinetically by measuring the evolution of nitrogen. From these results and ESR measurement of the TMT/TSA system, a possible initiation mechanism is proposed.     

Cyclic Acetal-Photosensitized Polymerization. 9. Photopolymerization of Triallylidene Sorbitol

Abstract

The photopolymerization of triallylidene sorbitol (TAS) was carried out in benzene at 40°C without the usual initiator. The polymerization of TAS was found to be initiated with the ester radical generated via the acetal radical from TAS by means of photoirradiation. The rate of polymerization and the molecular weight of polymer were small due to the degradative chain transfer, It was kinetically investigated from the standpoints of the degradative chain transfer by the allylidene group and the cyclization by three double bonds. The following results were obtained: (1) The relation between the rate of polymerization, R_p, the monomer concentration, [M], could be expressed by [M] /R_p = (A[M] + B)/(3[M] + C), where A, B, and C were constant; (2) the ratio of the rate constant of unimolecular cyclization to the total rate constant of bimolecular propagation and the chain transfer of uncyclized radical was estimated to be 3.0 mol/dm³. A small amount of cyclopolymerization took place.     

电荷转移聚合研究——三苯基磷引发丙烯腈光聚合

研究了三苯基磷(TPP)引发丙烯腈(AN)光聚合。测定了光聚合速率 R_p与单体浓度、引发剂浓度的关系为:R_p=K[AN]~(1.49)[TPP]~(0.47)以及光聚合反应活化能E_α=6.16千卡/摩尔,从激发态电荷转移机制,讨论了引发聚合机理。     

Kinetic study on the radical polymerization of 2‐methacryloyloxyethyl phosphorylcholine

Polymerization of 2‐methacryloyloxyethyl phosphorylcholine (MPC) was kinetically investigated in ethanol using dimethyl 2,2′‐azobisisobutyrate (MAIB) as initiator. The overall activation energy of the homogeneous polymerization was calculated to be 71 kJ/mol. The polymerization rate (R_p) was expressed by R_p = k[MAIB]^0.54±0.05 [MPC]^1.8±0.1. The higher dependence of R_p on the monomer concentration comes from acceleration of propagation due to monomer aggregation and also from retardation of termination due to viscosity effect of the MPC monomer. Rate constants of propagation (k_p) and termination (k_t) of MPC were estimated by means of ESR to be k_p = 180 L/mol · s and k_t = 2.8 × 10⁴ L/mol · s at 60 °C, respectively. Because of much slower termination, R_p of MPC in ethanol was found at 60 °C to be 8 times that of methyl methacrylate (MMA) in benzene, though the different solvents were used for MPC and MMA. Polymerization of MPC with MAIB in ethanol was accelerated by the presence of water and retarded by the presence of benzene or acetonitrile. Poly(MPC) showed a peculiar solubility behavior; although poly(MPC) was highly soluble in ethanol and in water, it was insoluble in aqueous ethanol of water content of 7.4–39.8 vol %. The radical copolymerization of MPC (M₁) and styrene (St) (M₂) in ethanol at 50 °C gave the following copolymerization parameters similar to those of the copolymerization of MMA and St; r₁ = 0.39, r₂ = 0.46, Q₁ = 0.76, and e₁ = +0.51. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 509–515, 2000     

Long-lived polymer radicals. VI. Polymerization of N-methylmethacrylamide with formation of living propagation radicals

The polymerization of N-methylmethacrylamide (NMMAm) with azobisisobutyronitrile (AIBN) was investigated kinetically in benzene. This polymerization proceeded heterogeously with formation of the very stable poly(NMMAm) radicals. The overall activation energy of this polymerization was calculated to be 23 kcal/mol. The polymerization rate (R_p) was expressed by: R_p = k[AIBN]^0.63-0.68[NMMAm]^1?2.5. Dependence of R_p on the monomer concentration increased with increasing NMMAm concentration. From an ESR study, cyanopropyl radicals escaping the solvent cage were found to be converted to the living propagating radicals of NMMAm in very high yields (ca. 90%). Formation mechanism of the living polymer radicals was discussed on the basis of kinetic, ESR spectroscopic, and electron microscopic results.     

Polymerization of Methyl Methacrylate by Charge-Transfer Mechanism with Amines and Carbon Tetrachloride

The charge-transfer complex formed between an amine and carbon tetrachloride can initiate the polymerization of vinyl monomers in a nonaqueous solvent such as dimethylsulfoxide. Here we use cyclopentylamine (CPA) and heptylamine (HA) as the donor compounds for charge-transfer initiation of the polymerization of methl methacrylate (MMA). The rate of polymerization R_p = k[MMA]¹ [amine]^0.5 [CCl₄]^0.5 when [CCl₄] [amine] ≤ 1; when [CCl₄] [amine] < 1, R_p becomes independent of [CCl₄] and R_p = k[MMA]^1.5 [amine]^0.5. The average constant at 60°C for the polymerization of MMA in terms of monomer were (1.66 ± 0.03) × 10^?5 and (1.46 ± 0.04) × 10^?5 s^?1 with CPA and HA, respectively, when [CCl₄] [amine] ≤ 1, and (1.16 ± 0.04) × 10^?5 and (1.39 ± 0.08) × 10^?1 L/mol·s when [CCl₄]/[amine] < 1.     

Sulfur-Containing Vinyl Monomers. XIX. Radical Polymerization of 2-Mercaptobenzothiazolyl Methacrylate

2-Mercaptobenzothiazolyl methacrylate (MBTM) was synthesized by the reaction of 2-mercaptobenzothiazole and methacrylyl chloride in tetrahydrofuran at -18°C. MBTM was found to polymerize in the presence of 2,2′-azobisisobutyronitrile (AIBN), n-BuLi, and UV light. From the kinetic studies of radical polymerization of MBTM with AIBN in benzene at 60°C, the overall activation energy was determined to be 18.9 kcal/mole, and the rate of polymerization (R) was expressed as R_p = k[AIBN]^0.5 [MBTM], where k is the overall polymerization rate constant. From these results this polymerization was confirmed to proceed via an ordinary radical mechanism. This monomer (M₂) was also copolymerized radically with styrene (M₁) at 60°C, and the resulting copolymerization parameters were determined as r₁ = 0.042, r₂ = 0.20, Q₂ = 4.09, and e₂ = 1.39. The thermal stability and the photodegradation behavior of the polymers were examined, and they were compared with those of the related polymers.     

Kinetics of free-radical polymerization of p-vinylbenzyl methyl ether: Crosslinking by initiator free radicals

Kinetics of polymerization of p-vinylbenzyl methyl ether at low conversion either in bulk or in benzene have been found to be quite similar to those of the unsubstituted monomer styrene. Rates of polymerization initiated by peroxides or α,α′-azobisisobutyronitrile over the temperature range 50–70°C. have been found to be proportional to [Monomer][Initiator]^1/2 with an activation energy difference E_propagation – 1/2 E_termination ≈ 6 kcal./mole. Azo initiation leads to essentially unbranched poly(vinyl-benzyl methyl ether) even at very high conversions, whereas initiation of undiluted monomer by diacyl peroxides results in some crosslinking at high conversion. Use of biacetyl as a photoinitiator of polymerization over the temperature range 0–60°C. with either bulk monomer or monomer solutions in benzene has been found in each instance to yield crosslinked, insoluble polymers at low degrees of conversion. Benzene solutions of soluble polymer have been converted to high molecular weight branched polymers by free radicals generated by photolysis of biacetyl, and a substantial preference of methyl free radicals to abstract benzyl hydrogens of poly(p-vinylbenzyl methyl ether) rather than add to solvent benzene has been observed.