A BN Aromatic Ring Strategy for Tunable Hydroxy Content in Polystyrene

BN 2‐vinylnaphthalene, a BN aromatic vinyl monomer, is copolymerized with styrene under free radical conditions. Oxidation yields styrene–vinyl alcohol (SVA) statistical copolymers with tunable hydroxy group content. Comprehensive spectroscopic investigation provides proof of structure. Physical properties that vary systematically with hydroxy content include solubility and glass transition temperature. BN aromatic polymers represent a platform for the preparation of diverse functional polymeric architectures via the remarkable reaction chemistry of C−B bonds.     

Synthesis and applications of acid-labile acrylic polymers

A variety of acrylic and methacrylic acetal esters were synthesized by reaction of unsaturated carboxylic acids with vinyl ethers. The acetal esters were converted by radical polymerization and GTP to acid-labile homo- and copolymers. Coatings of these polymeric acetal esters containing photosensitive acid-generating compounds are useful in image-formation through chemical amplification. Thus, poly(tetrahydropyranyl methacrylate-co-benzyl methacrylate) can be used in positive working deep UV microlithography. Poly(tetrahydropyranyl acrylate), coated in a thin layer over a tacky elastomer, provides a high resolution, water-developable negative working tonable composition. Several polymeric and nonpolymeric acetal esters can be used for positive working electrostatic imaging through changes in electrical conductivity.     

Temperature and concentration effects on polar-modified alkyllithium polymerizations and copolymerizations

Addition of polar modifiers to alkyllithium-initiated homopolymerizations of butadiene causes substantial changes in the microstructure of the polymers produced. These changes are shown to depend not only on the concentration of modifier, but also on the polymerization temperature. The combined effects of modifier concentration and reaction temperature have been considered, and a method is presented for quickly determining the proper conditions for preparation of a polybutadiene of any 1,2-microstructure within a range of 10–80%. It is also shown that in anionic polar-modified copolymerizations of butadiene–styrene, the reaction temperature is again critical. Within a certain concentration range of modifier, the temperature will influence the rate of styrene incorporation or the randomness of styrene units in the resulting copolymers.     

Doubly-dendronized linear polymers

Doubly-dendronized polymers were synthesized by grafting polybenzyl ether dendrons onto a poly(hydroxy) styrene polymer with polyaliphatic esters.     

Syntheses and reactions of functional polymers. XCIII. Syntheses of polymers containing the N-(4-hydroxy-3-nitrophenyl)succinimide structure in the chain and the use of these activated polymer esters of N-blocked amino acids or peptides

Polymers containing the N-(4-hydroxy-3-nitrophenyl)succinimide residue were designed in order to achieve acyl activation of a reacting carboxylic acid in the solid phase. These polymers were prepared through the following three routes: (a) styrene was allowed to copolymerize with N-(4-hydroxy-3-nitrophenyl)- or N-(4-acetoxy-3-nitrophenyl)maleimide, (b) styrene was copolymerized with N-(4-acetoxyphenyl)maleimide in the presence of divinylbenzene (DVB), and the copolymer obtained was hydrolyzed and nitrated, (c) a copolymer of maleic anhydride and styrene was reacted with p-aminophenol, followed by nitration. The polymers prepared by routes b and c were converted to the activated polymer esters of N-blocked amino acids and peptides by using dicyclohexylcarbodiimide (DCC). The acylated polymers thus obtained were treated with amino acid esters and found to give peptides quantitatively without racemization.     

Prodendronic polyamines from stable or labile methacrylates obtained by selective Michael addition onto asymmetric diacrylic compounds

A new synthetic strategy for the preparation of methacrylic monomers and polymers carrying acyl β‐amino groups is presented. The approach is based on the Michael addition of aliphatic amines onto asymmetric acrylic/methacrylic compounds, reacting the amine highly selectively with the acrylic unit while leaving the methacrylic moiety unreacted. The corresponding polymers are then obtained by conventional radical polymerization. The use of N,N,N′,N′‐tetraethyldiethylenetriamine (TEDETA) as the secondary amine leads to TEDETA moieties supported on polymeric chains. The new aminopolymers are sensitive to pH and to temperature exhibiting a lower critical solution temperature of between 50 and 90 °C. A further interesting feature of the new approach is that the stability toward hydrolysis of the side β‐amino acyl compounds was found to be dependent on whether an acrylamide or an acrylate is employed as the acrylic group of the asymmetric starting material. The esters exhibit an enhanced sensitivity to hydrolysis, compared to standard aliphatic esters, and decompose releasing a derivative of the amine precursor, within hours or weeks, depending on the pH and temperature conditions. The use of the amides leads to stable polymers when the same experimental conditions are applied. The novel dendronic polyamines have been proven to interact with DNA and to transfect cells with efficiency close to that obtained with polyethyleneimine vectors used as positive controls. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2297–2305     

Polymerization of asymmetric polyfunctional monomers. III. Ionic polymerization of acrylic and methacrylic esters of 2-allylphenol

The polymerization of acrylic and methacrylic esters of 2-allyphenol with different anionic, cationic and coordination catalysts was studied. The polymerization occurs exclusively or predominantly through (meth)acrylic C?C double bonds in all the studied cases. With anionic catalysts the allylic groups are not polymerizable and the polymers have linear structure. Polymerization with catalysts based on dialkylaluminum chloride (alone or associated with some metal salts) yields soluble or partially crosslinked polymers, depending on the reaction conditions. The crosslinking is due to the participation of allylic groups in the polymerization reactions. Copolymers of acrylic and methacrylic esters of 2-allylphenol with styrene, acrylonitrile, methyl methacrylate, N-vinylcarbazole and 1,3-pentadiene were synthesized by copolymerization in the presence of anionic catalysts and of systems based on dialkylaluminum chloride.     

Reversible Addition‐Fragmentation Chain‐Transfer Polymerization for the Synthesis of Poly(4‐acetoxystyrene) and Poly(4‐acetoxystyrene)‐block‐polystyrene by Bulk,Solution and Emulsion Techniques

The living radical polymerization of 4‐acetoxystyrene via the RAFT process has been achieved employing bulk, solution and emulsion techniques. The rate of polymerization was studied between 60°C and 90°C. Increasing the temperature increases the rate of polymerization without affecting the polydispersity. Poly(4‐acetoxystyrene) with narrow polydispersity (1.08) was obtained. Various novel dithiocarboxylic esters and dithiocarbamates were screened as chain‐transfer agents for the RAFT polymerization of 4‐acetoxystyrene. The block copolymerization of poly(4‐acetoxystyrene) with styrene leading to poly(4‐acetoxystyrene)‐block‐polystyrene confirmed the presence of active chain ends in the first block. The acetoxy polymers were hydrolyzed to the corresponding hydroxy polymers under mild basic conditions.     

Synthesis and study of polymerization and copolymerization of some oligounsaturated esters—V

A number of oligoacetylenic acrylates have been synthesized and characterized. The i.r. as well as the physical and chemical properties show the probable formation of oligomers possessing a proposed structure. The oligomers undergo further reaction in the presence of peroxide initiators to give crosslinked products. The i.r. spectra of the crosslinked products show that the oligomers undergo addition polymerization on the terminal double bonds. The triple bond in these oligomers is relatively unreactive under the conditions of polymerization, while that in the glycolic residue is reactive to a certain extent, as indicated by the higher per cent conversion of the oligomers having such unsaturated glycolic residue.Copolymerization of various oligoacetylenic acrylates, methacrylates and esters with terminal allylic group with styrene give crosslinked products. The polymers and copolymers are pale yellow in colour, glassy, insoluble in organic solvents and infusible; the copolymers were more rigid than the homopolymers. The volume shrinkage of various oligomers during polymerization lies between 5 and 13 per cent.     

High performance controlled reactors from micellar assemblies of aromatic amino acid amphiphiles for nanoparticle synthesis

The micellar assemblies of lauryl esters of tyrosine (LET) and phenylalanine (LEP) show extraordinary emulsification properties. The structural similarity in respect of the aromatic ring between the dispersed phase, styrene, and the surfactants facilitates solubilization of styrene up to four times the weight of LEP and 11 times that of LET. We propose that the solubilization site varies between core in the LEP and shell in the LET micelles. LET affords double emulsions, water in oil in water (w/o/w) over a narrow phase composition, for example at R=7.15, where R represents ratio of weight of styrene to LET. A schematic model depicting the solubilization site of styrene at different regions in LET and LEP micelles has been proposed. On polymerization, the emulsions with LET and LEP micelles generated high molecular weight polymer nanoparticles of size 12-49 nm with low polydispersity index (P(d)). This demonstrates that micellar assemblies act as templating controlled reactors for the polymerization reaction. We demonstrate that PS nanoparticle dispersion of size 49 nm with polymer weight fraction as high as 42.80% could be produced from emulsions with the LET surfactant, in contrast to LEP that is 50% less efficient. Polymerization of these emulsions occurs predominantly through a micellar nucleation mechanism. It is significant to note that under the same conditions, the control experiments with sodium dodecylsulfate (SDS) micelles resulted in polymers with broad distribution, P(d)>3.0 in molecular weight.     

Redox ion exchangers based on sulfochlorinated copolymers of styrene and divinylbenzene

Conclusions The authors have obtained redox polymers by reacting sulfochlorinated copolymers of styrene and divinylbenzene of both ordinary and macroporous structures with quinones, di-, and trihydroxybenzenes or dialkyl esters of hydroquinone; their properties have been studied.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 9, pp. 2126–2128, September, 1970.     

Photodynamic therapy: regulation of porphyrin synthesis and hydrolysis from ALA esters

Photodynamic therapy (PDT) is a tool for the treatment of certain cancerous and pre-cancerous conditions. The natural precursor of porphyrins 5-aminolevulinic acid (ALA) has been extensively used as a pro-photosensitiser in PDT. ALA's poor permeability has been enhanced by chemical esterification with aliphatic alcohols. Some of the ALA esters proved to be more efficient than ALA for porphyrin synthesis. In the present work we studied the nature of porphyrin synthesis regulation from the ALA esters Hexyl-ALA (He-ALA) and R,S-ALA-2-(hydroxymethyl)tetrahydropyranyl ester (THP-ALA) in an adenocarcinoma cell line. We found that He-ALA is incorporated into the cells at a higher rate, followed by THP-ALA and ALA, whereas ALA and ALA esters efflux at the same rate mediated by passive diffusion. Although ALA entrance to the cell might be regulatory at low concentrations, ALA derivative uptake is not a limiting factor. At high concentrations, the regulation of ALA conversion into porphyrins is driven by the enzyme porphobilinogenase, whereas ALA esters hydrolysis is regulated by esterases. The key conclusion of this contribution is that the use of ALA esters has to be limited to low concentrations where no regulation on porphyrin synthesis takes place.     

Thermal‐initiating potentialities of vinyl polyperoxides: Transmutation of block‐into‐block copolymer and an exploratory investigation of surface texture and morphology

This article describes the first comprehensive study on the use of vinyl polyperoxides, namely, poly(α‐methyl styrene peroxide) (PMSP) and poly(styrene peroxide) (PSP), as thermal initiators for the synthesis of active polymers, PMSP–PS–PMSP/PSP–PS–PSP, by free‐radical polymerization with styrene. The active polymers have been characterized by ¹H NMR, differential scanning calorimetry, thermogravimetric analysis, and gel permeation chromatography analysis. The PMSP–PS–PMSP/PSP–PS–PSP is further used as the thermal macroinitiator for the preparation of another block copolymer, PS‐b‐PMMA, through the reaction of the active polymers with methyl methacrylate. The mechanism of the block copolymer formation is discussed. Having established the scanning micrograph details of the homopolymer phases, we analyze the surface features and morphology of the block copolymer. Furthermore, the distinction in appearance is highlighted with a view toward strengthening the chemistry with the structural appearance in materials processed differently. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3665–3673, 2000     

Polymer compatibility - a consequence of repulsive groups within monomer units

The majority of compatible polymer mixtures known so far has been rationalized by assuming special interactions between the different polymers or by specific repellent forces within certain types of copolymers. Thus, the compatibility of PMMA with special copolymers of styrene and acrylonitrile is explained by an intramolecular repulsion within the copolymer between the two comonomers styrene and acrylonitrile. In our opinion this phenomenon is not limited to copolymers, but also holds for explaining the compatibility of various homopolymers such as PVDF/PMMA. To this end we simply regard the homopolymer PVDF (-CH₂-CF₂-) as a copolymer of -CH₂- and -CF₂- “monomers”. By the same token it is possible to assume repellent forces within the PMMA monomer units (i.e. repulsion between the CH₂-C(CH₃) and the polar carbonyl group). Those strong repellent forces within the PVDF and PMMA homopolymers can be reduced by mixing the two species. This concept of repulsive forces within monomers as a driving force for polymer-polymer compatibility can be used to search for new classes of compatible polymers. This will be demonstrated with the polystyrene/polyalkylmethacrylate blends. Thus, with comparable geometry in the side chains, polystyrene and polymethacrylic esters will form compatible blends, as born out in the systems polystyrene/polycyclohexyl methacrylate or poly-tert-butyl styrene/poly-3,3,5-trimethylcyclohexylmethacrylate which are compatible in all proportions. Taking into account certain steric prerequisites, one can even obtain compatible blends lacking exothermic interaction.     

Facile synthesis of comb,star, and graft polymers via reversible addition–fragmentation chain transfer (RAFT) polymerization

Reversible addition–fragmentation chain transfer (RAFT) polymerization has been shown to be a facile means of synthesizing comb, star, and graft polymers of styrene. The precursors required for these reactions were synthesized readily from RAFT‐prepared poly(vinylbenzyl chloride) and poly(styrene‐co‐vinylbenzyl chloride), which gave intrinsically well‐defined star and comb precursors. Substitution of the chlorine atom in the vinylbenzyl chloride moiety with a dithiobenzoate group proceeded readily, with a minor detriment to the molecular weight distribution. The kinetics of the reaction were consistent with a living polymerization mechanism, except that for highly crowded systems, there were deviations from linearity early in the reaction due to steric hindrance and late in the reaction due to chain entanglement and autoacceleration. A crosslinked polymer‐supported RAFT agent was also prepared, and this was used in the preparation of graft polymers with pendant polystyrene chains. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2956–2966, 2002     

Linear polymers of some vinyl monomers containing a terminal acetylenic group

The synthesis and polymerization of representative acrylic-type esters containing a terminal acetylene group, CH₂?C(R)COO(CHR′)_m? C?CH, where R and R′ are H and CH₃ and m = 1 or 2, by anionic initiation to linear polymers are described. In contrast, crosslinked polymers were formed when radical and cationic initiators were used. Crosslinked polymers were also obtained with organolithium compounds but not with sodium naphthalene and sodium benzalaniline; this observation is discussed and compared to the behavior of the acetylenic acrylic esters which do not contain a terminal acetylenic hydrogen. The unpolymerized acetylenic bonds in the resulting linear polymers were shown to be present by infrared spectroscopic methods and by the following post-reactions of these bonds: (1) the heat- and radical-initiated crosslinking of the polymers through the acetylenic bonds; (2) the post-bromination of the acetylenic bonds; and (3) the reaction of decaborane with the acetylenic bonds. The anionic copolymerization of acrylonitrile and styrene with these acetylenic monomers were performed and compared to the copolymerizations with 1-acryloxy-2-butyne and 1-methacryloxy-2-butyne. Dibromination of the linear polymers affords self-extinguishing polymers, while decaboronation yields soluble polymers which do not soften up to 300°C. The linear polymers may be classified as “self-reactive” polymers which yield thermosetting polymers.     

Synthesis and characterisation of sulfonic acid-containing ion exchange membranes based on hydrocarbon and fluorocarbon polymers

Radiation-induced graft copolymerisation has been used to modify polymers with styrene to prepare pre-cursor copolymers that can be subsequently functionalised to produce ion exchange membranes. This paper describes the processes of simultaneous and pre-irradiation graft copolymerisation of styrene to modify hydrocarbon and fluorine-containing polymers and their sulfonation to produce hydrophilic membranes. The effect of varying the grafting conditions and their characterisation by ion exchange capacity, electrolytic resistivity and equilibrium water content is reported.     

Ru/CeO2催化剂催化苯乙烯氢甲氧基羰基化反应高选择性制备直链酯类化合物

酯类化合物在工业上具有广泛应用,例如可用于合成香水、调味剂(味精)、洗涤剂和表面活性剂等.其中,烯烃的氢烷氧基羰基化反应是一种合成酯类化合物的重要方法,其低消耗、100%的原子经济性和原料的易获得等优势使其在制备酯类化合物中成为一个有效且实际可行的方法.对于该反应,文献多采用Pd或Rh的络合均相催化剂,其中控制反应过程中直链酯类化合物(L)和支链酯类化合物(B)的选择性是一项颇具挑战性的课题.虽然目前可通过配体的设计和修饰来调节,但多集中在均相催化体系,因此在选择性调变方面的研究仍很欠缺.相对于均相催化,多相催化由于产物易分离和提纯、催化剂可循环使用等优势而逐渐引起了研究者的广泛关注.在多相催化体系中, Pd负载在强酸性树脂作为催化剂已被应用于苯乙烯氢甲氧基羰基化反应,但在该反应中支链酯类化合物为主要产物.因此,寻找一个可有效改善多相反应体系中选择性问题的方法是非常有意义的.在本研究工作中,我们分别以CeO2纳米颗粒(NP)、CeO2纳米棒(Rod)和CeO2纳米立方体为载体,利用浸渍法制备了Ru/CeO2、Ru/CeO2-rod和Ru/CeO2-cube三种催化剂,并进一步用于苯乙烯氢甲氧基羰基化反应.探究了CO压力、反应温度和反应时间对三种催化剂催化苯乙烯氢甲氧基羰基化反应的影响.结果表明, Ru/CeO2作为多相催化剂催化苯乙烯氢甲氧基羰基化反应时,苯乙烯选择性高于99%,直链酯选择性为83%,支链酯选择性为12%.机理研究表明,该反应为自由基机理.动力学分析表明,该反应的反应活化能为48.50 k Jmol^–1.结合三种催化剂的反应活性以及HRTEM结构表征结果可知,该反应中L/B比值与Ru的尺寸有较大关系.进一步的拉曼表征和NH3-TPD表征结果证明, Ru的尺寸与金属-载体之间的相互作用以及催化剂表面的氧空位浓度有直接关系.     

Reactivity of ester groups on insoluble polymer supports

A study was made of the comparative rates of reaction of active ester functional groups (p-nitrophenyl and 2,4-dinitrophenyl esters) situated on three types of insoluble support polymers and on small, soluble analogs of the polymer molecules. The supports consisted of a styrene—divinylbenzene bead-type polymer (2% DVB), a styrene—divinylbenzene popcorn polymer (0.2% DVB), and a popcorn polymer with 2,3-dimethylbutadiene and substituted styrene units in the chain. p-Nitrophenyl benzoate and 2,4-dinitrophenyl p-isopropylbenzoate were used as soluble analogs. Rates of aminolysis by small molecules (2-aminoethanol and n-tetradecylamine) in pyridine and of solvolysis in alcohols catalyzed by both small (N-methylimidazole) and large (polyvinylimidazole) molecules were determined. With the small amines, finely divided particles of popcorn and bead type styrene polymers reacted at about the same rate, which was approximately 1/5 the rate of reaction of the homogeneous analogs. With a high molecular weight reagent, polyvinylimidazole, the heterogeneous reactions were much slower and the popcorn polymer reacted faster than the bead polymer. In catalyzed solvolyses, the styrene popcorn derivative reacted faster in benzyl alcohol and slower in 1-hexanol than the dimethylbutadiene popcorn polymer derivatives.     

Deintercalation of a chemically switchable polymer from a layered silicate nanocomposite

The phenomenon of intercalation is widely known as a key process in the area of polymer/layered silicate nanocomposites. In the formation of such nanocomposites, a polymer chain is intercalated between the layers of a layered (silicate) host, typically giving a well-ordered multilayered stack with a repeat distance of only a few nanometers. Intercalated systems are excellent models for studies of confined geometries, and they often display enhanced material properties as well. In this study, we examined a series of polymers in which it was possible to reverse the intercalation process (i.e., to achieve deintercalation). Homopolymers and copolymers of poly(methyl methacrylate) and poly(tetrahydropyranyl methacrylate) (PTHPMA) were intercalated into an organically modified synthetic fluoromica. Thermally induced deprotection of the tetrahydropyranyl group resulted in the transformation of PTHPMA into poly(methacrylic acid), which was then observed to deintercalate from the silicate host. X-ray diffraction and thermogravimetric analysis were used to study the deintercalation process. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 3151–3159, 2003