壳聚糖在二氯乙酸中的溶致液晶性

制备了不同脱乙酰度和分子量在１－３ ～１５－１ ×１０５ 范围内的壳聚糖样品,并用傅里叶变换红外光谱法（ＦＴＩＲ）和粘度法进行了表征．借助偏光显微镜研究了不同壳聚糖样品在二氯乙酸中的液晶相转变和液晶状态．实验结果表明,分子量在１０５ ～１０６ 范围内的增大使壳聚糖形成液晶相的临界浓度（ Ｃ＊ ） 略有降低;脱乙酰度在７０ ～９０ ％ 范围内,对Ｃ＊ 的影响基本可以忽略．临界浓度的实验值与根据Ｋｈｏｋｈｌｏｖ Ｓｅｍｅｎｏｖ Ｏｄｉｊｋ 理论预示的值比较一致,说明蠕虫链模型可以很好地描述壳聚糖分子链在二氯乙酸中的溶致液晶行为．     

杂多酸引发四氢呋喃聚合反应

八十年代中、后期发现，杂多酸（ＨＰＡ）是阳离子聚合反应的良好引发剂［１，２］．ＨＰＡ是一类酸强度比浓硫酸还高的质子酸［３］，不仅具有易于制备，结构稳定，腐蚀性低，易溶于大多数有机溶剂的特点，更为重要的是，ＨＰＡ可以回收和重复使用．因此，ＨＰＡ作为一类...     

五甲基茂基三(对氯苯氧基)钛/甲基铝氧烷体系催化丙烯聚合反应与动力学的研究

采用茂钛配合物五甲基茂基三(对氯苯氧基)钛[Cp- Ti(O- C6H4Cl -P)3]甲基铝氧烷(MAO)体系进行丙烯聚合反应,考察了聚合温度和Al- Ti摩尔比(nAl- nTi)对聚合活性和产物分子量的影响.研究发现在合适的聚合条件下,聚合初期产物的分子量随聚合时间线性增大,并保持较窄的分子量分布(Mw Mn=1.5～1.8),表现出准活性聚合的行为,而聚合物的GPC曲线呈双峰分布,表明聚合初期的体系存在多活性中心.另外,初步提出了衰减动力学方程以探讨聚合速率衰减期的丙烯聚合反应规律,求出了不同条件下丙烯聚合的衰减系数,从而可计算出衰减期内任一时间的丙烯聚合速率.     

碳桥限制构型催化剂催化乙烯1-己烯共聚和共聚物结构表征

为了碳桥限制构型催化剂(CpCN-CGC)的工业应用,为模试提供工艺参数,我们考察了用这种催化剂,以正庚烷为溶剂,甲基铝氧烷(MAO)为助催化剂的乙烯与1-己烯共聚,考察因素包括聚合温度、乙烯压力、铝锆比、氢气压力和1-己烯浓度.研究发现聚合温度从100升高到140℃,共聚活性先升高再降低,聚合物分子量持续降低;氢气分压从0.1增加到0.8 MPa,共聚活性仍呈先升高再降低,聚合物分子量持续降低的趋势;乙烯压力从0.4升高到1.8 MPa,共聚活性先升高再降低,但聚合物分子量逐步增大;Al/Zr从500升高到1 000,共聚活性逐步增大,但聚合物分子量趋向减小.优化工艺条件为:催化剂用量为10μmol,Al/Zr=700,聚合温度为110~120℃,乙烯压力为1.2~1.4 MPa,1-己烯加入量为20 mL,聚合时间为30 min.此时共聚活性最高达到106g/(mol-Zr·h),共聚物中1-己烯插入率达到了8.34%;用13C-NMR、GPC、DSC表征了聚合产物,计算了二单元组和三段组序列分布,并发现有交替共聚片段HEHE存在.最后还讨论了在聚合物中发现的多种支链的形成机理.     

石油磺酸盐水溶液及其油/水平衡体系

应用ＥＳＲ法研究了石油磺酸盐水溶液及其油／水平衡 水溶液胶束的形成及其微观性质,结果表明,石油磺酸盐／３％正丁醇／０．３％,氯化十二烷平衡体系的有效临界胶束浓度远高于石油磺酸盐在３％正丁醇,０．３％氯内中的临界胶束浓度（ＣＭＣ）,发产生正比结果的原因。     

Radical Polymerization of Maleic Acid by Potassium Persulfate in the Presence of Polyvinylpyrrolidone in Water

Maleic acid(MA) was found to polymerize easily by potassium persulfate (KPS) in water in the presence of polyvinylpyrrolidone (PVP), and to form a polymer complex in which the molar ratio of MA to VP monomer unit was approximately unity. The formation of the polymer complex was accelerated by increases in the reaction temperature, in the concentrations of KPS and MA, and in the molecular weight of PVP used. Thermal degradation behavior of the polymer complex was studied thermo-gravimetrically. The thermagram of the polymer complex was substantially different from those of PVP and the 1:1 mixture of MA and PVP. It was found that the poly-MA portion of the polymer complex decomposed at 100-300°C, while the PVP portion underwent degradation at 350-500°C. In order to separate poly-MA from the polymer complex, the polymer complex was methylated by diazomethane, and 50 ～ 60% of the poly-MA part in the polymer complex was separated as its methyl ester, which was found to be oligomer (M = 400 ～ 500) by GPC. Unseparated part of poly-MA seems to be grafted onto PVP. The polymerization of citraconic acid (CA) was also performed in the same manner. Similar results were obtained, though the polymerization of CA was slower as compared with that of MA.     

以2,4-二苯基-4-甲基-1-戊烯为链转移剂的苯乙烯自由基聚合

以２,４ 二苯基 ４ 甲基 １ 戊烯（αＭＳＤ）为链转移剂,采用与环境友好的本体自由基聚合法及悬浮自由基聚合法合成了重均分子量Ｍｗ＝１,０００～５０,０００,分子量分布Ｍｗ／Ｍｎ≈２的苯乙烯低聚物．随着αＭＳＤ浓度的增加分子量降低效果明显,分子量分布明显变窄．热引发本体聚合物具有单端活性双键结构．     

甲壳素类液晶高分子研究--低分子量壳聚糖溶致液晶性及分子量对液晶临界浓度的影响

研究了两种用酶降解法得到的低分子量壳聚糖样品(CS1和CS2)的溶致液晶性.用GPC并辅以质谱法确定了两样品的数均相对分子质量为622和2311 g/mol.在相对分子质量低至622的低分子量壳聚糖(相当于四糖)水溶液中仍发现了溶致液晶现象,并确定出相对分子质量为622和2311的低分子量壳聚糖液晶临界浓度为73%和36%(W/W%),这些结果与已报道的中、高分子量壳聚糖液晶临界浓度随分子量升高而降低的基本规律是一致的.实验结果与经典的KS理论预测值不符,因为低分子量壳聚糖的相对分子质量超过了KS理论对高分子临界浓度的预测范围.     

α,β-聚-DL-天冬酰胺衍生物水凝胶的合成及其溶胀性能研究

以ＤＬ 天冬氨酸为单体，通过缩合聚合反应合成聚 ＤＬ 丁二酰亚胺，然后用不同比例的乙醇胺和丁二胺进行开环和交联，获得α，β 聚 ＤＬ 天冬酰胺衍生物水凝胶．测定了水凝胶在几种不同溶液中的溶胀比，结果表明该水凝胶在蒸馏水中的溶胀比为１１０～４４０倍，在不同浓度的盐溶液中的溶胀比有不同程度的降低，在０１６ｍｏｌ／Ｌ的抗肿瘤药物５ 氟尿嘧啶（５ Ｆｕ）水溶液中的溶胀比可达１４０倍．研究了聚丁二酰亚胺分子量、溶剂用量及交联剂用量等因素对凝胶溶胀性能的影响．     

水杨醛亚胺镍配合物催化的乙烯水相聚合

在含表面活性剂的水相体系中, 用一系列水杨醛亚胺镍配合物催化乙烯聚合, 得到了高分子量低支化度聚乙烯. 研究表明水杨醛亚胺镍配合物中苯环上取代基的电子效应和空间位阻对乙烯聚合活性和聚合物的分子量有所影响. 提高配合物酚氧环上取代基的吸电子性, 聚合活性相应增加, 但聚乙烯的分子量降低; 而增加苯胺环上取代基的空间位阻, 聚合活性和聚乙烯的分子量均增加. 粘度法测得由水相聚合得到的聚乙烯的分子量在10⁴～10⁵范围内. DSC测得该聚乙烯的结晶度在50%～70%之间, 熔点在115～137 ℃范围内. GPC分析表明用环辛二烯合镍[Ni(COD)₂]助催化乙烯, 聚乙烯的分子量分布随酚氧环上取代基电负性增加而从双峰到单峰变化, 动态流变学研究进一步说明了聚乙烯分子量及其分布的变化.     

Organic nanosynthesis of diarylfluorene-based ladder-type gridarene isomers via intramolecular A1-B1 type Friedel-Crafts gridization

Fluorene-based ladder-type nanogrids have been synthesized via the stepwise and iterative Friedel-Crafts/Suzuki cross-coupling reactions, and efficient intramolecular gridization reaction could enhance yield up to ～95%. Multiple configurational isomers were successfully separated with the yield of 10%, 20% and 65% for Grid-DFCz-1, Grid-DFCz-2 and Grid-DFCz-3 respectively. The molecular configurations of Grid-arene isomers were characterized and confirmed by the NMR spectra. We found that molecular configuration has little influence on photophysical and electrochemical properties.     

FRACTIONATED CRYSTALLIZATION OF HDPE IN PS/POE/HDPE/SBS BLENDS

The fractionated crystallization behavior of the minor dispersed HDPE phase in PS/POE/HDPE/SBS quaternary blends was investigated by differential scanning calorimetry (DSC).Interestingly,we found that the fractionated crystallization behavior of HDPE was molecular weight dependent.At a fixed composition,HDPE with lower molecular weight showed more obvious fractionated crystallization behavior than HDPE with higher molecular weight.This was ascribed to a finer dispersion of HDPE with lower molecular weigh...     

Preparation and characterization of graft terpolymers with controlled molecular structure

Segmented terpolymers, poly(alkyl methacrylate)‐g‐poly(D ‐lactide)/poly(dimethylsiloxane) (PLA/PDMS), were prepared with a combination of the “grafting through” technique (macromonomer method) and controlled/living radical polymerization (atom transfer radical polymerization or reversible addition–fragmentation transfer polymerization). Two synthetic pathways were used. The first was a single‐step approach in which a low‐molecular‐weight methacrylate monomer (methyl methacrylate or butyl methacrylate) was copolymerized with a PLA macromonomer and a PDMS macromonomer. The second strategy was a two‐step approach in which a graft copolymer containing one macromonomer was chain‐extended by a copolymerization of the second macromonomer and the low‐molecular‐weight methacrylate. The kinetics of both synthetic approaches were investigated, showing that the polymerizations exhibited a controlled/living behavior. Furthermore, the molecular structure of the terpolymers (composition, molecular weight distribution, and microstructure) was investigated by two‐dimensional liquid chromatography. Well‐defined terpolymers with controlled branch distribution, composition (F_w,PMMA/F_w,PLA/F_w,PDMS ～ 50/30/20) molecular weight (M_n ～ 50,000 g · mol^?1), and a narrow molecular weight distribution (M_w/M_n ～ 1.3) were prepared via both pathways. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1939–1952, 2004     

SYNTHESIS AND CHARACTERIZATION OF N-（1-NAPHTHYL） SUCCINIMIDE

In this paper a modified two-step procedure for synthesis of N-（1-naphthyl） suecinimide （NaS） was developed, and the molecular structure of NaS was properly characterized by XRD, FT-IR, 1H NMR, DSC, etc. The results show that the melting point of our product is 159 ℃-160.5 ℃, and the characteristic infrared absorption band of carbonyl group splits into two peaks （1705cm^-3/1779cm^-3）, which are found to be quite different from the documented data （rap 147℃ -149℃; IR C=0-1700cm^-3）. Besides, photophysical spectroscopy was found to be powerful to study the molecular structure and crystal morphology of NaS compound.     

基于分子信标荧光纳米探针的李斯特菌DNA均相检测方法

基于分子信标(MB)识别和荧光纳米粒子探针技术,建立了均相体系中李斯特菌目标DNA的高灵敏检测新方法.首先以羊抗人免疫球蛋白(IgG)标记的异硫氰酸荧光素(FITC)为核材料,成功制备了FITC-IgG@SiO2核壳荧光纳米粒子,有效防止了传统方法中采用单一FITC制备纳米颗粒时泄露严重的问题.随后以FITC-IgG@SiO2荧光纳米粒子和纳米金分别标记单核细胞增生李斯特菌序列特异性分子信标探针5'端和3'端,成功构建了单核细胞增生李斯特菌序列特异性分子信标荧光纳米探针.在实验优化条件下,α(令α=F/F0,F代表MB和目标DNA杂交以后的荧光强度,F0代表MB完全闭合时的荧光强度)与目标DNA浓度在1～200pmol/L浓度范围内呈良好的线性关系,检出下限为0.3pmol/L,相对标准偏差为2.6%(50pmol/L,n=11).将该方法应用于食品样品中单核细胞增生李斯特菌的检测,结果与国标法一致.     

(1-x)La_(0.67)Ca_(0.33)MnO_3/xCuO复合体系与La_(0.67)Ca_(0.33)Mn_(1-x)Cu_xO_3电输运行为比较

用不同实验方法制备了名义组分为(1-x)La_(0.67)Ca_(0.33)MnO_3/xCuO(LCMO/CuO)和La_(0.67)Ca_(0.33)Mn_(1-x)Cu_xO_3(LCMCO)两组样品,在宽的温度范围内研究了样品的电输运行为随Cu含量x的变化关系,发现这两组样品表现出不同的行为.对于LCMCO,随x的增加,金属-绝缘体转变温度T_p迅速降低,当x=5.5%,样品表现出绝缘体导电行为;而LCMO/CuO复合样品,当x≤6%时,随x增加,Tp逐渐下降,x≥6%时,T_p不再继续降低,所有样品几乎表现出相同的电输运行为.另外,这两组样品均表现出较好的低场磁电阻效应(LFMR),在0.3 T下样品的最大磁电阻分别达到了～76%和88%.基于样品结构以及制备过程的分析,我们认为LFMR效应的增强主要是因为颗粒边界上形成的Cu相关自旋无序层引起的.     

Synthesis,characterization, and diels–alder extension of cyclopentadiene telechelic polyisobutylene. IV. α,ω-Di(3-cyclopentadienylpropyldimethylsilyl)polyisobutylene

The synthesis and chain extension of polyisobutylene having nonfluxional terminal cyclopentadiene groups is described. The fluxional behavior of silylcyclopentadiene end groups was previously found to prevent Diels–Alder dimerization of the end groups. The incorporation of a propyl moiety between the silicon atom and the cyclopentadiene ring was found to prevent this fluxional isomerization. Polyisobutylene was synthesized having 3-cyclopentadienylpropyldimethylsilyl end groups with a functionality near 2.0. While thermal extension at 80°C resulted in threefold molecular weight increase, coupling with bisdienophiles yielded greater than tenfold molecular weight increases. The retro-Diels–Alder reaction of coupled end groups prevents the attainment of high-molecular-weight polymers at equilibrium.     

氯化亚铁/β-丙氨酸席夫碱配合物催化甲基丙烯酸甲酯原子转移自由基聚合的研究

1995年Matyjaszewski等提出的原子转移自由基聚合(ATRP)的概念为活性自由基聚合开辟了一条新的途径．近10年来,ATRP日益得到高分子合成化学家的重视．典型的ATRP反应体系所用催化剂由可变价过渡金属化合物和适当的配体组成．常用的过渡金属化合物有铜、铁、钌、和铑等．其中铁催化剂以其低毒性引起人们的重视．     

Emulsion copolymerization behavior of α-methylstyrene with methacrylonitrile

The emulsion copolymerization behavior of α-methylstyrene with methacrylonitrile is described. The effects of polymerization temperature, potassium persulfate initiator concentration, sodium lauryl sulfate emulsifier concentration on copolymer yield, molecular weight, and rate of copolymerization are described. The copolymer was found to have an azeotropic composition at 43 mole-% AMS. Reactivity ratios were determined to be 0.06 and 0.28 for AMS and MAN, respectively.     

Kinetic and NMR spectroscopic studies of chiral mixed sodium/lithium amides used for the deprotonation of cyclohexene oxide

The mixed-metal complex formed from n-butylsodium, n-butyllithium, and a chiral amino ether has been studied by NMR spectroscopy. Three different mixed-metal amides were used as chiral bases for the deprotonation of cyclohexene oxide. The selectivity and initial rate of reaction were compared for sodium-amido ethers, lithium-amido ethers, and mixtures of sodium and lithiumamido ethers in diethyl ether and tetrahydrofuran, respectively. The mixed sodium/lithium amides are more reactive than the single sodium and lithium amides, whereas the stereoselectivities are higher when lithium amides are used. The alkali-metal/gamma-amido ethers exhibit both higher initial reaction rates and stereoselectivities than their beta-amido ether analogues. NMR spectroscopic studies of mixtures of n-butylsodium (nBuNa), n-butyllithium (nBuLi), and the gamma-amino ethers in diethyl ether show the exclusive formation of dimeric mixed-metal amides. In diethyl ether, the lithium atom of the mixed-metal amide is internally coordinated and the sodium atom is exposed to solvent; however, in tetrahydrofuran, both metals are internally coordinated.