Studies in Cyclocopolymerization. IX. A Systematic Kinetic Study on the Cyclocopolymerization of Vinyl Ethers with Maleic Anhydride in Different Solvents

Abstract

The kinetics of the AIBN-initiated copolymerization of divinyl ether (DVE) and ethyl vinyl ether (EVE) with maleic anhydride (MA) was extensively studied in seven different solvents. The yield at 100% conversion as a function of the feed composition when the total monomer concentration is kept constant gave a confirmation of the composition of these copolymers: DVE/MA=½ and EVE/MA=1/1. The study of the initial rate as a function of the feed composition made it possible to determine the relative values of the different propagation rate constants consistent with a mechanism by successive and selective additions: in the EVE-MA system, the addition of EVE is slower than the addition of MA; in the DVE-MA system, the addition of DVE is slower than the addition of the first MA molecule, while the addition of the second MA molecule is slower than the first one. The study of the dependence of the monomer concentration, of the AIBN concentration, and of the efficiency of the initiator, on the rate of polymerization, shows finally that the true order of the monomer concentration is close to 1 while its apparent order varies from 1 to 2. From all the kinetic data it was observed that the mechanism of these co polymerizations can be explained without reliving upon the concept of participation of the charge-transfer complex formed between the monomers. However, participation of the complex in a competing mechanism with the above cannot be completely excluded.     

Studies in Cyclocopolymerization. X. Cyclocopolymerization of Tetrahydronaphthoquinone and Dimethyl Tetrahydronaphthoquinone with Divinyl Ether

Abstract

Tetrahydronaphthoquinone (THNQ) and dimethyl tetrahydronaphthoquinone (DMTHNQ) were found by UV spectroscopy to form donor-acceptor complexes with divinyl ether (DVE), the latter being the electron donor. Since the participation of such complexed species has been considered in the cyclocopolymerization of a 1,4-diene with a monoolefin such as DVE-maleic anhydride (MA) and DVE-fumaronitrile (FN) systems, radical copolymerization of THNQ and DMTHNQ with DVE was studied. It was found that these copolymers have constant 1:1 composition regardless of the feed composition. The terpolymerization of DVE-THNQ-DMTHNQ confirmed the 1:1 donor-acceptor composition in the polymer. The integration of the NMR spectrum was used in determining the copolymer composition. The spectroscopic data suggest a cyclized repeating unit in which the copolymer main chain consists of only DVE units. There is a marked difference between these copolymers and the typical cyclo-copolymers, such as DVE-MA and DVE-FN, in which the copolymer main chains consist of DVE and the comonomer alternately, with the overall composition being 1:2. These results are interpreted in terms of the steric effect by the bulky acceptor monomers and the electronic interaction between the comonomers. The competition between an acceptor monomer and the charge-transfer (CT) complex toward the cyclized DVE radical in the propagation step appears to favor the CT complex.     

Studies in Cyclocopolymerization. VII. Copolymerization of Chloromaleic Anhydride with Divinyl Ether

Chloromaleic anhydride was found to copolymerize with divinyl ether to form soluble copolymers of 1:1 composition, devoid of residual unsaturation. A bicyclic structure is proposed in which the polymer backbone consists only of divinyl ether units. The ease with which the copolymers underwent dehydrohalogenation suggests that the hydrogen and chlorine atoms on the anhydride unit are in a trans configuration as a result of a stepwise cycli-zation process.

Oxidation of the hydrolyzed, dehydrohalogenated copolymers afforded the corresponding vic-diol copolymers. The absence of a significant decrease in copolymer molecular weight upon periodic acid cleavage of the vic-diol copolymers supported the proposed structure. Functional group analyses and softening points were in accord with the structures of the derived copolymers.     

醋酸乙烯—二乙烯基苯共聚反应动力学

根据文献查得的Ｑ，ｅ值，计算了醋酸乙烯－二乙烯基二元共聚的竞聚率，预测其共聚的可能性。以甲苯为汽油为致孔剂，采用悬浮聚合方法合成该二元大孔共聚物。红外光谱分析跟踪共聚反应过程中乙酰氧基和苯环相对比例的变化，并测定共聚反应过程中比表面积，孔率和平均孔径的变化。     

Phosphine-Catalyzed Reactions of Imides and Hydrophosphoryl Compounds Addition to Divinyl Sulfone

Russian Journal of General Chemistry - An efficient method for the phosphine-catalyzed bisaddition of P(O)H compounds and cyclic imides to divinyl sulfone has been developed. The reaction proceeds...     

Trapping of Thiol Terminated Acrylate Polymers with Divinyl Sulfone to Generate Well-Defined Semi-Telechelic Michael Acceptor Polymers

Herein we report the synthesis of vinyl sulfone end functionalized PEGylated polymers by reversible addition-fragmentation chain transfer (RAFT) polymerization for conjugation to proteins. Poly(ethylene glycol) methyl ether acrylate (PEGA) was polymerized in the presence of 1-phenylethyl dithiobenzoate with 2,2'-azobis(2-methylpropionitrile) as the initiator to generate well-defined polyPEGAs with number-average molecular weights (M(n)) by gel permeation chromatography (GPC) of 6.7 kDa, 11.8 kDa and 16.1 kDa. Post-polymerization, the majority of polymer chains contained the dithioester functional group at the omega chain end, and the polydispersity indexes (PDI) of the polymers ranged from 1.08 to 1.24. The dithioester was subsequently reduced via aminolysis, and the resulting thiol was trapped with a divinyl sulfone in situ to produce semi-telechelic, vinyl sulfone polyPEGAs with efficiencies ranging between 85% and 99%. It was determined that the retention of vinyl sulfone was directly related to reaction time, with the maximum dithioester being transformed into a vinyl sulfone within 30 minutes. Longer reaction times resulted in slow decomposition of the vinyl sulfone end group. The resulting semi-telechelic vinyl sulfone polymers were then conjugated to a protein containing a free cysteine, bovine serum albumin (BSA). Gel electrophoresis demonstrated that the reaction was highly efficient and that conjugates of increasing size were readily prepared. After polymer attachment, the activity of the BSA was 92% of the unmodified biomolecule.     

Unusual O-Csp 2 Bond Cleavage in Vinyl Ethers with Organylhalosilanes

Russian Journal of General Chemistry -     

Fluorine-containing Vinyl Ethers: I. Reactions with Carboxylic Acids

Polyfluoroalkyl vinyl ethers take up aliphatic and aromatic carboxylic acids in the presence of 0.2-5 wt% of trifluoroacetic acid at 55-105°C to give fluorine-containing hemiacetals in 60-100% yields.     

Solid-phase Synthesis of Vinyl Sulfones Using Polystyrene-supported Selenomethyl Phenyl Sulfone

The solid-phase preparation of vinyl sulfones via a novel polystyrene-supported selenomethyl phenyl sulfone reagent has been reported.     

Stereoselective One-Pot Synthesis of Vinyl Sulfones from Jcthyl Phenyl Sulfone

Vinyl sulfones are stereoselectively prepared in high yields in a one-pot by the Wittig-Horner reaction via phosphorylation of methyl phenyl sulfone at low temperature.     

The Pyrolysis of Fur-2-ylmethyl Vinyl Ethers

The pyrolysis of fur-2-ylmethyl vinyl ether and its next highest homologue, the propenyl ether, is described. Products from two reaction mechanisms are observed namely a 3-substituted 2-methylfuran from an electrocyclic mechanism, and 1,2-di-(fur-2-yl)-ethane and furylpropanal from a biradical mechanism.     

Synthesis of Fulvene Vinyl Ethers by Gold Catalysis

Gold-catalyzed cyclization of 1,5-diynes with ketones as reagents and solvent provides diversely substituted vinyl ethers under mild conditions. The regioselectivity of such gold-catalyzed cyclizations is usually controlled by the scaffold of the diyne. Herein, we report the first solvent-controlled switching of regioselectivity from a 6-endo-dig- to 5-endo-dig-cyclization in these transformations, providing fulvene derivatives. With respect to the functional-group tolerance, aryl fluorides, chlorides, bromides, and ethers are tolerated. Furthermore, the mechanism and selectivity are put to scrutiny by experimental studies and a thermodynamic analysis of the product. Additionally, 6-(vinyloxy)fulvenes are a hitherto unknown class of compounds. Their reactivity is briefly evaluated, to give insights into their potential applications.     

二乙烯基砜交联的可德胶化学水凝胶的制备与表征

以二乙烯基砜(DVS)作为交联剂通过亲电加成反应制备了可德胶化学水凝胶。采用傅里叶变换红外光谱(FT-IR)、扫描电子显微镜(SEM)和质构分析手段表征了所得凝胶的结构与性能,并对其形貌、溶胀率以及水凝胶的力学性质与制备条件的关系进行了研究。结果表明:所得凝胶网络结构较为致密均匀,溶胀率依赖于交联度。可德胶化学水凝胶的强度和韧性可以通过DVS的用量、可德胶的浓度和碱溶液的浓度进行调控。     

Regioselective Reactions of Pyridine-2-sulfenyl Bromide with Vinyl and Allyl Ethers

Russian Journal of General Chemistry - Annulation reactions of pyridine-2-sulfenyl bromide with vinyl and allyl ethers proceeded regioselectively, but with opposite regiochemistry. Reactions with...     

Cycloadditions of Bifunctional Vinyl Ethers with Electrophilic Alkenes through Tetramethylene Zwitterion Intermediates

Bifunctional vinyl ethers react with electron‐poor alkenes to cyclobutanes in good yields. The second C?C bond reacted with neither the cyclobutane nor its zwitterion intermediate, even on heating. Cyclobutanes formed from ‘tetracyanoethylene’ ( 8 ) were transformed into tetrahydropyridines by reaction of the corresponding zwitterion with MeCN as the solvent. In contrast, cyclobutanes formed from dimethyl (dicyanomethylidene)propanedioate ( 9 ) did not react with MeCN, which is ascribed to diminished stabilization of the zwitterion intermediate, and increased steric effects. These results extend the classical studies of Huisgen and his co‐workers.     

The Synthesis of Phosphonate Ester Containing Fluorinated Vinyl Ethers

Three novel perfluorovinyl ethers containing phosphonate ester groups, diethyl 1,1,2,2,3,3,5,6,6-nonafluoro-4-oxa-5-hexenylphosphonate, (EtO)(2)P(O)(CF(2))(3)OCF=CF(2) (1), diethyl 1,1,2,2,4,5,5-heptafluoro-3-oxa-4-pentenylphosphonate, (EtO)(2)P(O)(CF(2))(2)OCF=CF(2) (2), and diethyl 1,1,2,2,4,5,5,7,8,8-decafluoro-4-trifluoromethyl-3,6-dioxa-7-octenylphosphonate, CF(2)=CFOCF(2)CF(CF(3))O(CF(2))(2)P(O)(OEt)(2) (3), have been synthesized. Perfluorovinyl ethers 1 and 2 were synthesized from methyl 4-trifluoroethenoxy-2,2,3,3,4,4-hexafluorobutanoate and methyl 3-trifluoroethenoxy-2,2,3,3-tetrafluoropropanoate, respectively, while perfluorovinyl ether 3 was synthesized either from 5-trifluoroethenoxy-4-trifluoromethyl-3-oxa-1,1,2,2,4,5,5-heptafluoropentylsulfonyl fluoride or methyl 6-trifluoroethenoxy-5-trifluoromethyl-4-oxa-2,2,3,3,5,6,6-heptafluorohexanoate. The carboxylate esters were converted to the corresponding fluoroalkyl iodides via a free-radical iododecarboxylation. The sulfonyl fluoride was converted to its corresponding fluoroalkyl iodide via iododesulfination. The intermediate iodides were found to be useful precursors for the incorporation of the phosphonic ester groups via a photoreaction with tetraethyl pyrophosphite to produce diethyl fluorophosphonites. The diethyl fluorophosphonites were oxidized to the desired phosphonates, 1, 2, and 3, utilizing hydrogen peroxide as the oxidant. Moderate to good overall yields of perfluorovinyl ethers 1-3 have been achieved.     

Diazo Reactions with Unsaturated Compounds: VII. Vinyl p-Methylphenyl and Vinyl p-Nitrophenyl Ethers in the Meerwein Reaction

Vinyl p-methylphenyl ether in aqueous acetone at pH 3-4 in the presence of catalytic amounts of copper(II) chloride reacts with arenediazonium chlorides to form arylacetaldehydes. Vinyl p-nitrophenyl ether under the same conditions fails to react with arenediazonium chlorides.     

Acyl Iodides in Organic Synthesis: VI. Reactions with Vinyl Ethers

Reactions of acetyl iodide with butyl vinyl ether, 1,2-divinyloxyethane, phenyl vinyl ether, 1,4-di-vinyloxybenzene, and divinyl ether were studied. Vinyl ethers derived from aliphatic alcohols (butyl vinyl ether and 1,2-divinyloxyethane) react with acetyl iodide in a way similar to ethyl vinyl ether, i.e., with cleavage of both O–Csp2 and Alk–O ether bonds. From butyl vinyl ether, a mixture of vinyl iodide, butyl acetate, vinyl acetate, and butyl iodide is formed, while 1,2-divinyloxyethane gives rise to vinyl iodide, vinyl acetate, and 2-iodoethyl acetate. The reaction of acetyl iodide with divinyl ether involves cleavage of only one O–Csp2 bond, yielding vinyl acetate and vinyl iodide. In the reactions of acetyl iodide with phenyl vinyl ether and 1,4-divinyloxybenzene, only the O–CVin bond is cleaved, whereas the O–CAr bond remains intact.     

Improved Preparation and Application of Poly(Ethylene Glycol) Vinyl Sulfone

An improved synthesis of poly(ethy1ene glycol) vinyl sulfone is presented and its reactions with nucleophiles reported.