Surface-enhanced raman scattering from poly(4-vinyl pyridine)

Surface-enhanced Raman scattering (SERS) has been observed for poly(4-vinyl pyridine) absorbed onto silver island films. Bands near 1219 and 1613 cm^?1, which are weak in normal Raman spectra of PVP, are strong in SERS spectra, and the band near 1020 cm^?1, which is the strongest band in the normal spectra, is relatively weak in SERS. The strongest bands in the SERS spectra all belong to the same symmetry species as α_ZZ, implying that the pyridine moieties are adsorbed through the nitrogen atoms with a vertical conformation. The ring breathing mode of the pyridine rings is observed near 1020 cm^?1, a frequency characteristic of pyridinium ions or coordinated pyridine, providing further evidence for adsorption through the nitrogen atoms. Silver catalyzed photooxidation, which can lead to the appearance of artifacts in SERS spectra, particularly of polymers, can be reduced by overcoating SERS samples with thin films of polymers such as poly(methyl methacrylate) that have low Raman scattering cross sections.     

1,2-Dinitrile polymers. I. Hompolymers and copolymers of fumaronitrile,maleonitrile, and succinonitrile

Homopolymers and copolymers of fumaronitrile, maleonitrile, and succinonitrile have been prepared by using medium high temperature free-radical initiators. Black, nonfusible but soluble polymers were obtained. The spectroscopic and chemical evidence indicated a structure containing α-pyrrolenine rings and no free nitrile groups in the fumaronitrile and maleonitrile polymers and 1-pyrroline rings and free nitrile groups in the succinonitrile polymers. The polymers possessed good thermal stability, free spin concentration of 10¹⁷–10¹⁸ spins/g, and an ac conductivity at room temperature in nitrogen of 10^?6 to 10^?8 ohm^?1 cm^?1.     

Some perfluorocarbocyclic ethers and polyethers from hexafluorobenzene

High-resolution nuclear magnetic resonance (NMR) spectroscopy was used to determine the microstructures of some perfluorocarbocyclic ethers and polymers from reactions of bis(fluoroxy)-difluoromethane and hexafluorobenzene. The thermal and photochemical reactions of CF₂(OF)₂ and excess hexafluorobenzene are described. The structures of several new perfluoro-1,3-dioxolanes in which the rings constituted part of a bicyclic system were elucidated by ¹⁹F-NMR, gas chromatograph, gas chromatograph-infrared, and gas chromatograph-mass spectra. The copolymers of molecular weight about 2500 are, with 40% of the difluoromethylenedioxy groups, estimated by ¹⁹F-NMR to be in the polymer chain and the rest as pendant groups to the perfluorocyclohexylene and perfluorocyclohexenylene moieties. The suggested polymer structures are described and the mechanisms discussed.     

Spectroscopic study of rigid-rod polymers. I. Structures of model compounds

Poly(p-phenylene benzbisoxazole) and poly(p-phenylene benzbisthiazole) belong to the class of extended-chain, rigid-rod polymers possessing high modulus, high strength, and good thermal and oxidative resistance. Fibers and films of these polymers are processed from anisotropic solutions in strong acids such as methane sulfonic acid or polyphosphoric acid. The electronic absorption and vibrational spectra of the model compounds have been investigated in order to characterize the structures in the solid state and in nonprotonic solvents. The dramatic intensity differences in the spectra obtained have been interpreted by variations in the dihedral angle between the plane of the phenyl group and the plane of the central heterocyclic ring which affect the resonance configuration between the two rings.     

Molecular structure parameters in certain semiconducting polymers

The condensation polymers formed by condensing aromatic hydrocarbons or their derivatives with aromatic acids are quite conductive. The room temperature resistivities of 42 polymers studied here range from 10² to 10¹² ohm-cm. It is found that the resistivities are inversely related to the number of fused rings in the hydrocarbon portion of the monomer for either the homopolymers or copolymers. The resistivities are strongly dependent, inversely, upon the acid strength of the acid monomer reactants. For all the polymers studied, the conductivity σ depended upon the pressure P as ln(σ/σ₀) = (b^*/k)P^1/2 where b^* is seen to be an inverse function of the number of fused rings in the monomer in accord with theory. The resistivity ρ varied with absolute temperature T, as ln ρ ∞ (1/T) for all polymers. Thermoelectric powers were determined, and the various relationships established among energy interval, resistivity at “infinite temperature,” carrier concentrations and mobility ratios, number of fused rings, and pressure coefficients are discussed. The polymers are p-type. Doping by Be⁺⁺ or Cu⁺⁺ has a small effect, increasing the conductivity slightly. Electron spin concentrations and carrier concentrations are directly related among the polymers, being found nearly equal for the most conductive but differing by up to nine orders of magnitude in the least conductive polymers.     

The origin of the two νCO bands in the infrared spectra of acetophosphides

Conclusions The two intense bands in the infrared spectra of acetophosphides at 1600–1800 cm^–1 are due to valence vibrations of the carbonyl group of the cis-and transisomers.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 1, pp. 188–190, January, 1968.     

Poly-Schiff bases. III. Synthesis and characterization of polyesterazomethines

Ten new polyesterazomethines have been synthesized by solution polycondensation of five different diamines with 4,4′-[terephthaloyloxy]bis-3-ethoxybenzaldehyde and 4,4′-[isophthaloyloxy]bis-3-ethoxybenzaldehyde using dimethylacetamide in the presence of anhydrous LiCL. Fibrous polymers were precipitated by pouring the solutions into water. The polymerization proceeds rapidly to give highly viscous solutions. The resulting polymers were characterized by viscosity measurement, IR, x-ray diffraction study, elemental analysis, and DSC study. ¹H-NMR spectra of some of the polymers were also recorded. The thermal stability of the polymers was evaluated by TGA and IGA study. Electronic spectra of the polymers were recorded in H₂SO₄. © 1996 John Wiley & Sons, Inc.     

New Poly(Bismaleimide-Ether)s Containing Functional Pendant Carboxylic Groups

Abstract

New poly(bismaleimide-ether)s with functional pendant groups were synthesized by Michael addition polymerization of two monomers with functionality f > 2 (DL tartaric acid and methylene-5,5′disalicylic acid) to various bismaleimides with flexible groups (N,N'-4,4′-diphenyl-methanebismaleimide, N,N'-4,4′-diphenyletherbismaleimide and N,N'-4,4′-dibenzylbismaleimide). The polymerization occurred in solution, through the addition of the OH groups to the C[dbnd]C double bond of the maleimide rings. The polymers were obtained in good yields and they were characterized by elemental analysis, IR and ¹H NMR spectra, thermogravimetric analysis and viscozimetry.     

Stereoregularity of poly(2-vinylpyridine) and poly-(4-vinylpyridine)

In order to determine the stereoregularity of poly(4-vinylpyridine), 4-vinylpyridine-β,β-d₂ was synthesized from 4-acetylpyridine. The ¹H-NMR spectra of the deuterated and nondeuterated polymers were measured and analyzed. From the ¹H-NMR spectra of poly(4-vinylpyridine-β,β-d₂), triad tacticity can be obtained, while the ¹H-NMR spectra of nondeuterated poly(4-vinylpyridine) give the fraction of isotactic triad. The ¹³C-NMR spectra of poly(4-vinylpyridine) were also observed, and the spectra of C₄ carbon of polymers were assigned by the pentad tacticities. The fraction of isotactic triad of poly(2-vinylpyridine) and poly(4-vinylpyridine) obtained under various polymerization conditions were determined. The radical polymerization and anionic polymerizations with phenylmagnesium bromide and n-butyllithium as catalysts of 4-vinylpyridine gave atactic polymers.     

Polyether azomethines. I. Synthesis and characterization

Six new polyether azomethines were synthesized by melt and solution polycondensation of six different diamines with 4,4′-[1,4-phenylene bis(oxy)] bisbenzaldehyde. The polymers synthesized by solution method are yellow to white in color and had inherent viscosities up to 0.59 dL/g in concentrated H₂SO₄. The polymers obtained by melt condensation show higher viscosity. Except polymer IV , others are insoluble in common organic solvents. The polymers were characterized by IR, x-ray, elemental analysis, and DSC study. The thermal stability of the polymers was evaluated by TGA and IGA study. Polymers I-III are highly thermally and thermooxidatively stable and exhibit no appreciable decomposition up to 420°C both in air and nitrogen atmosphere. It was shown that the curing of the polyazo-methines takes place by opening up of the ? CH?N? linkages at higher temperature. The electrical conductivities of the virgin and iodine doped polymers were as high as 10^?11?10^?16 and 10^?6?10^?8S cm^?1, respectively, at 30°C. Electronic spectra of the undoped polymers ( I-III ) indicated a large bathochromic shift of the ? – ?^* absorptions band (376 nm) due to ? C?N? bonds of the model compound. This can be attributed to extensive delocalization of the electrons along the polymer chain. © 1995 John Wiley & Sons, Inc.     

Reversible addition–fragmentation chain transfer mediated radical polymerization of asymmetrical divinyl monomers targeting hyperbranched vinyl polymers

Reversible addition–fragmentation chain transfer (RAFT) mediated radical polymerizations of allyl methacrylate and undecenyl methacrylate, compounds containing two types of vinyl groups with different reactivities, were investigated to provide hyperbranched polymers. The RAFT agent benzyl dithiobenzoate was demonstrated to be an appropriate chain‐transfer agent to inhibit crosslinking and obtain polymers with moderate‐to‐high conversions. The polymerization of allyl methacrylate led to a polymer without branches but with five‐ or six‐membered rings. However, poly(undecenyl methacrylate) showed an indication of branching rather than intramolecular cycles. The hyperbranched structure of poly(undecenyl methacrylate) was confirmed by a combination of ¹H, ¹³C, ¹H–¹H correlation spectroscopy, and distortionless enhancement by polarization transfer 135 NMR spectra. The branching topology of the polymers was controlled by the variation of the reaction temperature, chain‐transfer‐agent concentration, and monomer conversion. The significantly lower inherent viscosities of the resulting polymers, compared with those of linear analogues, demonstrated their compact structure. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 26–40, 2007     

Synthesis,optical, and electrochemical properties of novel copolymers on the basis of benzothiadiazole and electron‐rich arene units

Novel alternating conjugated copolymers ( P1–P6 ) consisting of an electron‐deficient benzothiadiazole and a variety of electron‐rich thiophene‐arene‐thiophene units were synthesized by palladium‐catalyzed polycondensations (Stille and Suzuki reactions), aiming at processable materials with a reduced optical band gap. The structures of P1–P6 were confirmed by ¹H NMR and ¹³C NMR, and their molecular weights were determined by size exclusion chromatography. In the Suzuki polycondensation, the role of the catalyst [Pd(PPh₃)₄ and Pd(OAc)₂] on the resulting molecular weight was investigated. Pd(OAc)₂ enhances the molecular weight of the polymers for both thiophene and phenylene bis‐boronic esters as compared with Pd(PPh₃)₄. The optical properties of the polymers were examined in solution and the solid state. The polymers with n‐octyl substituents ( P1 , P4 , P5 , and P6 ) on the thiophene rings possessed less‐planar structures as a result of torsional steric hindrance, and their absorption spectra appeared blueshifted as compared with their unsubstituted analogues ( P2 and P3 ). The electrochemical properties of the polymers were studied using cyclic voltammetry. Although the alkyl substitution affects the oxidation potential, only marginal differences in the reduction potentials were observed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2360–2372, 2002     

cis- and trans-isomers of O,N-dimethylnitramine

Conclusions A study of the vibrational spectra of a mixture of cis-and trans-O,N-dimethylnitramine established that the band at 1623 cm^–1 in the spectrum of the vapor belongs to cis-O,N-dimethylnitramine, while the band at 1583 cm^–1 is due to trans-O,N-dimethylnitramine.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 3, pp. 590–592, March, 1972.     

15N-NMR spectroscopy. III. Neighboring residue effects in sequence polymers containing glycylglycine units

The tripeptides Phe-Gly-Gly, β-Ala-Gly-Gly, and ?-Aca-Gly-Gly as well as the peptide derivatives δ-isothiocyanatovaleroyl-Gly-Gly and ?-isothiocyanatocaproyl-Gly-Gly were synthesized by using known methods so that the peptide nitrogen between the two glycyl residues was isotopically enriched in ¹⁵N to a level of 0.8–0.9%. These monomer units were then used to produce the sequence polymers (Phe-Gly-Gly)_n, (β-Ala-Gly-Gly)_n, (δ-Ava-Gly-Gly)_n, and (?-Aca-Gly-Gly)_n. The 18.24 MHz ¹⁵N-NMR spectra of the oligo- and polypeptides were obtained by using trifluoroacetic acid as solvent, since the solutions have relatively low viscosity and exhibit a strong negative nuclear Overhauser enhancement of the ¹⁵N signals. For comparison, ¹⁵N-NMR spectra of the homopolymers (Gly)_n, (β-Ala)_n, (γ-Abu)_n, (δ-Ava)_n, and (?-Aca)_n were also recorded. The ¹⁵N signals from the ω-aminoacyl residues in the sequence polymers appear up to 11 ppm upfield of the signals observed for the homopolyamides. The ¹⁵N signals from the two glycyl residues are separated by 3–7 ppm. Comparison with the ¹³C-NMR spectra of the same polymers indicates that ¹⁵N-NMR is better suited for the characterization and sequence analysis of these types of polymers.     

Cationic polyelectrolytes. I. Soluble polymers prepared from reaction of chloromethylated polystyrene with tris(2-hydroxythyl)amine

The reaction of chloromethylated polystyrene with tris(2-hydroxyethyl)amine in N,N-dimethylformamide is described for the conditions to prepare soluble reaction products. The groups of the quaternary ammonium salt, which appear in the first stage of the reaction, transpose to the amino-ether groups. The reaction was followed by elementary analysis, IR and ¹H-NMR spectra, and viscosimetric measurements for nondialyzed and dialyzed samples. The presence of the tertiary amine groups on obtained polymers was also shown by titration. The polymers from the reaction of chloromethylated polystyrene with tris(2-hydroxyethyl)amine reacted easily with benzyl chloride.     

Head-to-head vinyl polymers. XI. Preparation and characterization of poly(methyl acrylate) and poly(methyl methacrylate) consisting of head-to-head and head-to-tail units through cyclopolymerization of acrylic and methacrylic anhydrides

Acrylic anhydride (AAn) and methacrylic anhydride (MAAn) were polymerized with radical initiator in polar solvents at high temperatures. The polymers obtained were found to consist of five-and six-membered ring structures by comparing IR spectra of the polymers with those of model compounds, succinic anhydride, and glutaric anhydride. Hydrolysis and methylation of the polymers gave new polymers composed of head-to-head (HH) and head-to-tail (HT) methyl acrylate (MA) or methyl methacrylate (MMA) units. The content of HH unit of these HH/HT polymers was determined by ¹H-NMR and ¹³C-NMR spectra. The softening, glass transition, and thermal degradation temperatures of the poly(MA) with HH and HT units were found to somewhat increase with increasing of the content of the HH units. On the other hand, the glass transition and thermal degradation temperatures of the poly(MMA) with HH and HT units increased similarly, but the softening temperature decreased as the content of the HH units increased.     

Synthesis of new conducting poly(2,5-thienylene)s containing alkylhydroxy and alkylester side chains

The chemical synthesis of new electroconducting poly(2,5-thienylene)s containing alkylhydroxy and alkylester side-chains in the β-position of the thiophene rings is reported. The polymers were obtained by oxidative homopolymerization or copolymerization of 2-(3-thienyl)ethanol and 2-(3-thienyl)ethyl hexanoate by FeCl₃ in nitromethane. Structural characterization using elemental analysis, FT-IR and NMR spectroscopy shows that a partial nucleophilic substitution of the hydroxy group by chlorine and a partial cleavage of the ester function take place during polymerization. The presence of the ester function with a long aliphatic chain makes the polymers soluble and allows them to be processed into films. The polymers can be doped using a solution of FeCl₃ to the maximum electrical conductivity of 10⁻³ Ω⁻¹ cm⁻¹.     

Magnetic circular dichroism studies of aromatic polymers

The magnetic circular dichroism (MCD) spectra of syndiotactic and isotactic polymers which contain aromatic chromophores have been found to be sensitive to configurational and conformational differences. For isotactic polymers it was determined that as the aromatic ring moved farther from the main chain the ration of B terms of the polymers to those of their model compounds reached a minimum but increased significantly when the aromatic ring was separated from the main chain by four atoms. This enhancement of MCD is believed to be caused by the alignment of the more flexible side chains which would allow the interaction of the aromatic rings with neighboring groups and could result in a favorable mixing of the ester electronic transition with the aromatic ¹A_1g?¹B_2u transition. This effect was not felt to any great extent by the syndiotactic polymers because the necessary nearest-neighbor interaction was sterically unfavorable. The ratio of the B terms of isotactic poly(phenyl methacrylate) to its model compound decreased as the polymer coil expanded, whereas it increased for the syndiotactic polymer. This effect reflects the different changes that the side chain interaction and orientations undergo in these polymers during coil expansion. The MCD ratios for iso- and syndiotactic poly(phenylethyl methacrylate) were not so sensitive during coil expansion. The ratio of the dipole strengths of the polymers and model compounds paralleled the MCD results, but the ultraviolet (UV) technique was less sensitive than MCD to subtle conformational differences. Poly(benzyl methacrylate) and benzyl pivalate were unsuitable systems for studying the MCD effect because the B terms of these materials approached zero.     

Synthesis and Characterization of 2-Arylseleno-2-chloro-1,2,3-triorgano-1,3,2λ5-diazaphosphetidin-4-ones

The reactions of N,N′-dimethyl-N,N′-bis(trimethylsilyl)urea 8 and N-methyl-N′-phenyl-N,N′-bis(trimethylsilyl)urea 9 with phenylselenenyl chloride 6 and p-chlorophenylselenenyl chloride 7 furnished the N-arylseleno-N,N′-diorgano-N′-(trimethylsilyl)ureas 10–13 . The reactions of 10–13 with MePCl₂ and PhPCl₂ resulted in the formation of a new class of compounds, the 2-arylseleno-2-chloro-1,2,3-triorgano-1,3,2λ⁵-diazaphosphetidin-4-ones 14–19 . The new selenophosphoranes 20 and 21 were obtained in the reaction of 15 and 17 with p-nitrophenol in the presence of triethylamine. The identity and structure of the new compounds were established by ¹H- and ¹³C-NMR spectroscopy, elemental analysis, ³¹P- and ⁷⁷Se-NMR spectroscopy in the case of the selenophosphoranes 14–21 , and mass spectrometry in the case of 11 and 13 . A possible mechanism of the reaction leading to the selenophosphoranes is discussed. Single-crystal X-ray structure analyses of the selenophosphoranes 19 and 20 were conducted. Both display distorted trigonal bipyramidal geometry at phosphorus, the major distortions being imposed by the four-membered rings.     

Anthradithiophene–thiophene copolymers with broad UV–vis absorption for organic solar cells and field‐effect transistors

New semiconducting copolymers, poly((TIPS‐ADT)‐(4,4′‐didodecyl‐2,2′‐bithiophene)) (PTADT2) and poly((TIPS‐ADT)‐(2,2′‐(4,4′‐didodecyl‐2,2′‐bithiophene)dithiophene)) (PTADT4) , produced by incorporating 5,11‐bis(triisopropylsilylethynyl) anthra[2,3‐b:7,6‐b']dithiophene (TIPS‐ADT) and alkyl‐thiophene derivatives were synthesized via Stille coupling polymerization. The optical, electrochemical, structural, field‐effect transistor, and solar cell properties of the polymers were investigated. The polymers showed good solubility at room temperature in common organic solvents due to their abundant side groups including TIPS and dodecyl side chains. Both polymers showed very broad UV absorption spectra covering the spectral range from 300 to 750 nm as a result of the combination of the different absorption ranges of the TIPS‐ADT unit (short wavelength region) and thiophene derivatives (long wavelength region). The FET device fabricated using PTADT4 containing additional unsubstituted thiophene rings as a spacer between TIPS‐ADT and thiophene derivatives showed a higher hole mobility (5.7 × 10^?4 cm²/V s) than the PTADT2 device (2.8 × 10^?5 cm²/V s), due to the improved intermolecular ordering caused by the reduced steric hindrance between bulky side chain groups. In addition, the PTADT4 :(6,6)‐phenyl‐C₇₀‐butyric acid methyl ester (PC₇₀BM) device showed an enhanced power conversion efficiency (PCE) of 1.30% compared with the PTADT2 :PC₇₀BM device (PCE of 0.55%) under AM 1.5G irradiation (100 mW/cm²). © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012