Agarose-polyaldehyde microsphere beads: Synthesis and biomedical applications

Polyaldehyde microspheres, polyglutaraldehyde (PGL), and polyacrolein (PA) were synthesized by polymerizing glutaraldehyde and acrolein in the presence of an appropriate surfactant. The microspheres with average diameter of 0.2 micron were used for the specific labeling of human red blood cells (RBC) and mouse lymphocytes. The "naked" microspheres were encapsulated with agarose and formed agarose-polyaldehyde microsphere beads in sizes ranging from 50 microns up to 1 cm. The encapsulated beads, with diameters ranging from 50 to 150 microns were used as insoluble adsorbents for affinity purification of antibodies. Beads with diameters varied from 150 to 250 microns were used for cell fractionation purposes (mouse B splenocytes from T splenocytes). Uniform beads of 1 mm diameter were designed for hemoperfusion purposes. As a model, the removal in vitro of anti-BSA from immunized goat whole blood was studied.     

Preparation of copolymer microspheres of diethylene glycol dimethacrylate

Preparation of copolymer microspheres of diethylene glycol dimethacrylate (2G) with several comonomers by radiation-induced radical polymerization is described. Ethyl methacrylate (EMA), acrylamide, maleic anhydride, and styrene gave microspheres successively. The copolymerization resulted in gelation more easily than the 2G homopolymerization. The allowed ratio of copolymerization is up to about 0.4 as the mole fraction of comonomer for the solution containing 10 vol % 2G monomer. Copolymerization affected the size of microspheres by keeping its narrow distribution. The size of microspheres was increased by the copolymerization with EMA and styrene and, was decreased with acrylamide. The formation of microsphere strongly depends on the crosslinking ability of monomers. The crosslinking ability and reactivity in the copolymerization cause the change of the size of the microspheres. © 1992 John Wiley & Sons, Inc.     

Hydrophilic core-shell microspheres: a suitable support for controlled attachment of proteins and biomedical diagnostics

Functional hydrophilic microspheres (latex particles) have found various applications in life sciences and in medicine - particularly in latex diagnostic tests. This paper presents a comprehensive review of studies on latex particles with a hydrophilic interfacial layer composed of various hydrophilic polymers with reactive groups at the ends of macromolecules or at each monomeric unit along the chain. Typical examples of these hydrophilic polymers are poly(2-hydroxyethyl methyl methacrylate), poly(acrylic acid), poly(N,N-dimethylacrylamide), polysaccharides, poly(ethylene oxide) and polyglycidol. Hydrophilic microspheres with different morphologies (uniform or core-shell, see Figure) have been synthesized by emulsion and dispersion polymerizations. The chemical structure of polymers which constitute the interfacial layer of microspheres has been investigated using a variety of instrumental techniques (such as XPS, SSIMS and NMR) and analytical methods based on specific chemical reactions suitable for the determination of particular functional groups. Microspheres are exposed to contact with proteins in the majority of medical applications. This paper presents examples of studies on the attachment of these biomacromolecules to microspheres. The relation between the structure of the interfacial layer of microspheres and the ability of these particles for the covalent binding of proteins is discussed. Several examples of diagnostic tests, in which hydrophilic microspheres with adsorbed or covalently immobilized proteins were used as reagents, are presented. The paper also contains a short review of the application of magnetic hydrophilic particles for protein separation. Examples of hydrophilic latex particles used for hemoperfusion or heavy metal ion separation are presented. Hydrophilic microspheres with uniform or core-shell morphologies.     

One‐stage synthesis of narrowly dispersed polymeric core‐shell microspheres

A method of one‐stage soap‐free emulsion polymerization to synthesize narrowly dispersed core‐shell microspheres is proposed. Following this method, core‐shell microspheres of poly(styrene‐co‐4‐vinylpyridine), poly(styrene‐co‐methyl acrylic acid), and poly[styrene‐co‐2‐(acetoacetoxy)ethyl methacrylate‐co‐methyl acrylic acid] are synthesized by one‐stage soap‐free emulsion polymerization of a mixture of one or two hydrophobic monomers and a suitable hydrophilic monomer in water. The effect of the molar ratio of the hydrophobic monomer to the hydrophilic one on the size, the core thickness, and the shell thickness of the core‐shell microspheres is discussed. The molar ratio of the hydrophobic and hydrophilic monomers and the hydrophilicity of the resultant oligomers of the hydrophilic monomer are optimized to synthesize narrowly dispersed core‐shell microspheres. A possible mechanism of one‐stage soap‐free emulsion polymerization to synthesize core‐shell microspheres is suggested and coagglutination of the oligomers of the hydrophilic monomers on the hydrophobic core is considered to be the key to form core‐shell microspheres. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1192–1202, 2008     

Effect of hydrophobic/hydrophilic characteristics of magnetic microspheres on the immobilization of BSA

Core-shell magnetic poly(styrene-acrylamide-acrylic acid) microspheres with carboxyl groups were successfully synthesized via dispersion copolymerization in the presence of nano-particle of Fe(3)O(4). The microspheres were characterized by FTIR spectra. They were used as carrier to immobilize bovine serum albumin (BSA). To investigate the effect of the microsphere surface properties on the immobilization of BSA, a series of microspheres with different hydrophobic/hydrophilic surface characteristics were prepared by adjusting molar percentages of monomers. The results showed that microspheres with different hydrophobicities/hydrophilicities had different immobilized ratios of BSA. In comparison with microspheres having hydrophilic characteristics those with hydrophobic characteristics had a much higher immobilized ratio. The possible reasons for these observations are discussed. In addition, ester activation and coupling times were optimized with respect to immobilized ratio.     

Synthesis and release profile analysis of thermo-sensitive albumin hydrogels

Novel thermo-responsive hydrophilic microspheres were prepared by free radical polymerization of methacrylate bovine serum albumin and N-isopropylacrylamide, as cross-linker and functional monomer, respectively. The incorporation of monomers in the network was confirmed by infrared spectroscopy, while the network density and shape of hydrogels strictly depend on concentration of monomers in the polymerization feed. The thermal analyses showed negative thermo-responsive behavior with pronounced water affinity of microspheres at temperature lower than lower critical solution temperature (LCST). The in vitro release studies of drug-loaded thermo-sensitive hydrogels were performed. Experimental data showed, for the copolymers with functional monomer/cross-linker ratio ≤ 1, a predominant drug release in the collapsed state, while the copolymers with functional monomer/cross-linker ratio > 1 showed prominent drug release in the swollen state. Below the hydrogel LCST, drug release through the swollen polymeric networks was observed, while a squeezing-out effect at temperature above the LCST was predominant.     

不同表面官能团和化学组成共聚物微球的表面生物矿化研究

采用具有不同共聚物组成和端基官能团的聚己内酯-b-聚乙二醇共聚物(PCL-b-PEG),通过双乳液溶剂挥发法制备了一系列具有不同表面性质的生物降解高分子微球.采用生物模拟矿化的方法以磷灰石修饰微球表面.进一步通过扫描电镜、热重分析仪、X-射线衍射仪和光电子能谱仪对微球表面磷灰石的形貌、含量、结构和组成进行了分析.研究了微球表面亲水性、粗糙度、官能团以及矿化时间对于磷灰石形成的影响.最终实验结果表明,随着共聚物中PEG含量增加,微球表面粗糙度和亲水性增加,因此微球表面磷灰石含量增加.同时微球表面官能团以及矿化时间的不同也会对磷灰石的形成和分布产生明显影响.     

Mono- or narrow disperse poly(methacrylate-co-divinylbenzene) microspheres by precipitation polymerization

Precipitation copolymerizations of five mono-vinyl methacrylic monomers including methyl methacrylate (MMA), butyl methacrylate (BMA), dodecyl methacrylate (DMA), glycidyl methacrylate (GMA), and hydroxyethyl methacrylate (HEMA) with divinylbenzene (DVB), in a wide range of comonomer composition, were carried out in acetonitrile to form mono- or narrow disperse crosslinked copolymer microspheres. In addition, two divinyl methacrylic monomers, ethylene glycol dimethacrylate (EGDMA) and triethylene glycol dimethacrylate (TEGDMA), were also copolymerized with DVB, and optionally a third comonomer (GMA or HEMA), to yield similar microspheres in acetonitrile. The possibility of creating porosity was explored for some of the copolymer particles. All these microspheres have clean surfaces due to the absence of any added steric or ionic stabilizer, and they are in the size of the micrometer range, varying from 1 to 7 µm, depending on the type and content of the methacrylic comonomer. Particle size distribution, surface morphology, internal texture, and porosity properties of these particles were studied by a Coulter Multisizer, a scanning electron microscope, a transmission electron microscope, and an Autosorb-1. The effects of comonomers on microsphere formation and morphology are described. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2899–2907, 1999     

Preparation of quantum dots encoded microspheres by electrospray for the detection of biomolecules

In this paper, a novel method based on the electrospray technique has been developed for preparation of quantum dot (QD)-encoded microspheres for the fist time. By electrospraying the mixture of polymer solution and quantum dots solution (single-color QDs or multi-color QDs), it is accessible to obtain a series of composite microspheres containing the functional nanoparticle. Poly(styrene-acrylate) was utilized as the electrospray polymer materials in order to obtain the microsphere modified with carboxyl group on the surface. Moreover, to test the performance of the QD-encoded microsphere in bioapplication, it is carried out that immunofluorescence analysis between antigens of mouse IgG immobilized on the functional microsphere and FITC labeled antibodies of goat-anti-mouse IgG in experiment. To the best of our knowledge, this is the first report of QD-encoded microspheres prepared by electrospray technology. This technology can carry out the one-pot preparation of different color QD-encoded microspheres with multiple intensities. This technology could be also suitable for encapsulating other optical nanocrystals and magnetic nanoparticles for obtaining multifunctional microspheres. All of the results in this paper show that the fluorescence beads made by electrospray technique can be well applied in multiplex analysis. These works provide a good foundation to accelerate application of preparing microspheres by electrospray technique in practice.     

In situ synthesis of polystyrene/nano-CdSe core/shell microspheres in aqueous solution at room temperature

Polystyrene/nano-CdSe (PS/CdSe) core/shell microspheres were synthesized via in situ soap-free emulsion polymerization using various functional monomers such as 2-(dimethylamino)ethyl methacrylate, 1-vinylimidazole, 2-vinylpridine, and 4-vinylpridine. They were co-polymerized with styrene monomer and provided the location for coordinating with Cd²⁺ ions on the PS particle surfaces. Then, we used an alkaline selenium solution as a selenium source. Reaction of the alkaline selenium solution with the previous emulsion produced nanocrystalline CdSe onto the surface of PS particles at room temperature under atmospheric pressure. The different kinds of functional monomers and the amount of both Cd²⁺ ion and functional monomer were playing important roles to obtain stable and uniform morphologies of CdSe particles. Morphological observations were carried out by both scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Through the SEM and TEM microphotographs, we could confirm the formation of PS/nano-CdSe composite particles. Ultraviolet–visible absorption measurement indicated the quantum dot effect in the resulted PS/nano-CdSe core/shell microspheres.     

Effects of the reaction parameters on the properties of thermosensitive poly(N‐isopropylacrylamide) microspheres prepared by precipitation and dispersion polymerization

Poly(N‐isopropylacrylamide) (PNIPAAm)‐based microspheres were prepared by precipitation and dispersion polymerization. The effects of several reaction parameters, such as the type and concentration of the crosslinker (N,N′‐methylenebisacrylamide or ethylene dimethacrylate), medium polarity, concentration of the monomer and initiator, and polymerization temperature, on the properties were examined. The hydrogel microspheres were characterized in terms of their chemical structure, size and size distribution, and morphological and temperature‐induced swelling properties. A decrease in the particle size was observed with increasing polarity of the reaction medium or increasing concentration of poly(N‐vinylpyrrolidone) as a stabilizer in the dispersion polymerization. The higher the content was of the crosslinking agent, the lower the swelling ratio was. Too much crosslinker gave unstable dispersions. Although the solvency of the precipitation polymerization mixture controlled the PNIPAAm microsphere size in the range of 0.2–1 μm, a micrometer range was obtained in the Shellvis 50 and Kraton G 1650 stabilized dispersion polymerizations of N‐isopropylacrylamide in toluene/heptane. Typically, the particles had fairly narrow size distributions. Copolymerization with the functional glycidyl methacrylate monomer afforded microspheres with reactive oxirane groups. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 968–982, 2006     

Surface modification of thermally expandable microspheres by grafting poly(glycidyl methacrylate) using ARGET ATRP

This study demonstrates the surface modification of thermally expandable core/shell microspheres by grafting glycidyl methacrylate (GMA) using activators regenerated by electron transfer (ARGET) ATRP. To retain the expansion properties it was essential to minimize the shear forces, use solvents compatible with the microspheres and keep the reaction times short (three hours or less). Using microspheres with hydroxyl groups on the surface, it was found that after converting these to α-bromo esters, GMA could be grafted by ARGET ATRP using only 50 ppm of copper catalyst in toluene at 30 °C. Decent control of the polymerization was achieved with PMDETA as ligand reaching PDIs of 1.4 for the solution polymerization of GMA. When microspheres were present, the polymerization was less controlled with higher PDIs. The epoxide groups of the grafted microspheres were hydrolyzed by HCl in THF providing a hydrophilic surface of the microsphere. The expansion property of the microspheres was studied after each reaction step by thermal mechanical analysis, and it was found that the expansion capacity was well preserved with only limited negative effect on the microspheres.     

A new type of monodisperse porous, hydrophilic microspheres with reactive chloroalkyl functionality: synthesis and derivatization properties

A seeded polymerization method based on a new functional monomer, 3-chloro-2-hydroxypropyl methacrylate (HPMA-Cl), was proposed for the synthesis of a new type of monodisperse porous, hydrophilic microspheres with reactive character. By applying the method, poly(3-chloro-2-hydroxypropyl methacrylate-co-ethylene dimethacrylate) (poly(HPMA-Cl-co-EDMA)) microspheres in the range of 4–7 μm, with specific surface areas between 2 and 146 m²/g, were obtained. The microspheres are hydrophilic in nature due to the hydroxyl groups and are easily derivatizable due to the reactive chloropropyl moiety. Ligands in the form of small molecules carrying hydrophobic alkyl or hydrophilic ion exchanger groups were covalently attached onto the microspheres via simple and one-pot reactions via their chloropropyl functionality. Using the same functionality, click chemistry and surface-initiated atom transfer radical polymerization were also applied for the generation of triazole ring and zwitterionic molecular brushes on the microspheres, respectively. Poly(HPMA-Cl-co-EDMA) microspheres seem to be a promising hydrophilic reactive material particularly for the synthesis of ion exchanger resins and chromatographic stationary phases.     

含氨基和环氧基双功能基的聚合物刷磁性微球的制备及对青霉素G酰化酶的固定化

在内部分散超顺磁性Fe3O4纳米粒子的二乙烯苯交联聚丙烯酸微球表面引入原子转移自由基聚合(ATRP)引发剂,引发聚合向微球表面分别引入P(GMMA-r-DMAEMA-r-GMA)、P(GMMA-r-DMAEMA)和P(GMMA-r-GMA)无规共聚物刷(GMMA为甲基丙烯酸甘油单酯,DMAEMA为甲基丙烯酸-N,N-二甲氨基乙酯,GMA为甲基丙烯酸缩水甘油酯),聚合物刷中GMMA链节的作用是使聚合物刷具有亲水性,DMAEMA引入氨基,GMA引入环氧基.研究了青霉素G酰化酶在这些载体上的固定化和其酶活性.结果表明,同时引入环氧基和氨基的P(GMMA-r-DMAEMA-r-GMA)刷磁性微球固定化青霉素G酰化酶的活性和活性收率都最高,其固定化动力学比只含环氧基P(GMMA-r-GMA)刷磁性微球的好.固定化酶比自由酶更耐热,固定化酶的最佳pH值比自由酶的略高,固定化酶重复使用10次后其活性保留70%.     

Characterization and chemistry of polyaldehyde microspheres

The chemical composition of polyacrolein (PA) microspheres of various types as well as polyglutaraldehyde (PGL) microspheres was elucidated. Nephelometric measurements were used for studying the stability properties of the polyaldehyde microspheres in different pH and salt concentrations. The stability of the aldehyde groups themselves at various pH and temperature was also determined. The polyaldehyde microspheres covalently bind amino ligands, e.g., proteins, antibodies, enzymes, and drugs in a single step. The effect of temperature and the influence of thiol compounds on the reaction between the polyaldehyde microspheres and amino ligands was examined. The reaction of the polyaldehyde microspheres with sodium hydrogen sulfite is also described.     

A library of thermoresponsive PEG-based methacrylate homopolymers: How do the molar mass and number of ethylene glycol groups affect the cloud point?

In this study, a novel library of thermoresponsive homopolymers based on poly (ethylene glycol) (EG) (m)ethyl ether methacrylate monomers is presented. Twenty-seven EG based homopolymers were synthesized and three parameters, the molar mass (MM), the number of the ethylene glycol groups in the monomer, and the chemistry of the functional side group were varied to investigate how these affect their thermoresponsive behavior. The targeted MMs of these polymers are varied from 2560, 5000, 8200 to 12,000 g mol⁻¹. Seven PEG-based monomers were investigated: ethylene glycol methyl ether methacrylate (MEGMA), ethylene glycol ethyl ether methacrylate (EEGMA), di(ethylene glycol) methyl ether methacrylate (DEGMA), tri(ethylene glycol) methyl ether methacrylate (TEGMA), tri(ethylene glycol) ethyl ether methacrylate (TEGEMA), penta(ethylene glycol) methyl ether methacrylate (PEGMA), nona(ethylene glycol) methyl ether methacrylate (NEGMA). Homopolymers of 2-(dimethylamino) ethyl methacrylate (DMAEMA) were also synthesized for comparison. The cloud points of these homopolymers were tested in different solvents and it was observed that it decreases as the number of EG group was decreased or the MM increased. Interestingly, the end functional group (methoxy or ethoxy) of the side group has an effect as well and is even more dominant than the number of EG groups.     

Synthesis and some properties of functionalized film-forming latexes

Semi-continuous emulsion copolymerization was used for preparation different colloid copolymers containig hydroxyl, carboxyl and amide functional groups. Copolymerization of hydroxyethyl methacrylate with styrene and butyl acrylate was investigated. Molecular weight increase in the copolymerization of methacrylamide indicated an extensive branching of macromolecules. Functionalized latexes have been used as binders in water borne paints. In addition to the crosslinking ability the hydrophilic functional monomers positively affect the film formation. The effect of dissociated carboxylic groups on lowering the minimum film forming temperature was much more pronounced if the polymer chains were more polar and softer. Some relationships between the latex flow properties and the film forming ability have been illustrated in this paper.     

Magnetic hydrophilic methacrylate-based polymer microspheres for genomic DNA isolation

Carboxyl groups containing magnetic and non-magnetic microspheres were used in solid-phase reversible immobilization (SPRI) of genomic DNA. Magnetic non-porous poly(2-hydroxyethyl methacrylate-co-ethylene dimethacrylate)--P(HEMA-co-EDMA), poly(glycidyl methacrylate)--PGMA and P(HEMA-co-GMA) microspheres with hydrophilic properties were prepared by dispersion copolymerization of the respective monomers in the presence of colloidal iron oxides. DNA from chicken erythrocytes and DNA isolated from bacterial cells of Bifidobacterium longum was used for testing of adsorption/desorption properties of magnetic microspheres. The occurrence of false negative results in polymerase chain reaction (PCR) caused by the presence of extracellular inhibitors in DNA samples has been solved using SPRI. The P(HEMA-co-EDMA) and P(HEMA-co-GMA) microspheres were used for isolation of DNA from different dairy products followed by PCR identification of Bifidobacterium strains.     

Coffee Beverage: A New Strategy for the Synthesis of Polymethacrylates via ATRP

Coffee, the most popular beverage in the 21st century society, was tested as a reaction environment for activators regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP) without an additional reducing agent. Two blends were selected: pure Arabica beans and a proportional blend of Arabica and Robusta beans. The use of the solution received from the mixture with Robusta obtained a high molecular weight polymer product in a short time while maintaining a controlled structure of the synthesized product. Various monomers with hydrophilic characteristics, i.e., 2-(dimethylamino)ethyl methacrylate (DMAEMA), oligo(ethylene glycol) methyl ether methacrylate (OEGMA₅₀₀), and glycidyl methacrylate (GMA), were polymerized. The proposed concept was carried out at different concentrations of coffee grounds, followed by the determination of the molar concentration of caffeine in applied beverages using DPV and HPLC techniques.     

Long-lived polymer radicals. VIII. Easy formation of long-lived propagating radicals of vinyl monomers at room temperature

Poly[acryloyl-L-valine (ALV)] microspheres containing peroxy ester groups were prepared by radical copolymerization of ALV with a small amount of di-tert-butyl peroxyfumarate. When the microspheres were irradiated in the presence of second vinyl monomers, long-lived propagating radicals of the second monomers were formed in the microspheres by the reaction of microsphere polymer radicals with the monomers. The presence of a minute quantity of ethyl alcohol served to soften the microspheres and made the polymer radicals more mobile in the microspheres. As a result, sharper ESR spectra of the propagating radicals were observed although their lifetimes became shorter. This microsphere method also yielded easily the stable propagating radicals of a-methylstyrene and 1,1-diphenylethylene which have no homopolymerizability in usual radical polymerization. When N-n-propyldimethacroylamide and N,N′-dimethyl-N,N′-dimethacroylhydrazine, which undergo cyclopolymerization, were used as second monomer, uncyclized polymer radicals were only observed. Some discussions were given on the propagation mechanism of the cyclopolymerization.