Radical Graft Polymerization of Vinyl Monomers Initiated by A20 Groups Introduced Onto a Carbon Black Surface: Effect of azo Groups on Graft Polymerization

The radical graft polymerization of vinyl monomers from carbon black initiated by azo groups introduced onto the surface was investigated. The introduction of azo groups onto carbon black surface was achieved by three methods: the reaction of 2,2′-azobis[2-(2-imidazolin-2-yl)propane] (AIP) with (1) epoxide groups, which were introduced by the reaction of carbon black with chlorometh-yloxirane; (2) acyl chloride groups, which were introduced by the reaction of carboxyl groups on the surface with thionyl chloride; and (3) 3-chloroformyl-1-cyano-1-methylpropyl groups, which were introduced by the reaction of carbon black with 4,4′-azobis(4-cyanovaleric acid) and then thionyl chloride. The amount of azo groups introduced onto the surface by the above methods was determined to be 0.07-0.19 mmol/g. The graft polymerization of methyl methacrylate was found to be initiated by azo groups introduced onto the carbon black surface. During the polymerization, poly(methyl methacrylate) was effectively grafted onto carbon black through propagation of the polymer from the radical produced on the surface by the decomposition of the azo groups. The percentage of grafting using carbon black having azo groups introduced by method 1 increased to 40%. It was also found that the graft polymerization of several vinyl monomers such as styrene, acrylonitrile, and acrylic acid was initiated by the azo groups introduced onto the surface and the corresponding polymer was effectively grafted onto the surface. Furthermore, the effect of the amount of carbon black having azo groups on the graft polymerization was investigated.     

丙烯酰胺在炭黑表面接枝聚合研究

利用Ｃｅ＾４＋和羟甲基化炭黑组成的氧化还原引发体系，探讨了丙烯酰胺在炭黑表面的自由基水溶液接枝聚合机理。研究表明：单体浓度、硝酸浓度和铈盐用量直接影响丙烯酰胺在炭黑表面的接枝聚合，ＦＴＩ和ＴＥＭ分析证明：改性炭黑表面存在着聚丙烯酰胺。改性炭黑粒子的Ｚｅｔａ电位值与未改性炭黑粒子相同，但它与水组成的分散体具有极好的分散稳定性。     

Heat-Resistant Polymer-Grafted Carbon Black: Grafting of Poly(Organophosphazenes) onto Carbon Black Surface

Abstract

The grafting of poly(organophosphazenes) onto carbon black surface by the reaction of poly(dichlorophosphazene) (PDCP) with carbon black having sodium phenoxide groups was investigated. PDCP was prepared by the ring-opening polymerization of hexachlorocyclotriphos-phazene in solution using sulfamic acid as a catalyst. The introduction of sodium phenoxide groups onto carbon black was achieved by treatment of phenolic hydroxyl groups on the surface with sodium hydroxide in methanol. Poly(diphenoxyphosphazene) (PDPP) was successfully grafted onto carbon black by the reaction of PDCP with sodium phenoxide groups introduced onto the surface followed by the replacement of chlorine atoms in PDCP with phenoxy groups. The percentage of grafting onto carbon black increased to 206% at 30°C after 12 h. It was found that only 1.4% of sodium phenoxide groups on carbon black surface was used for the grafting of PDCP because of the blocking of the surface by grafted polymer chains. Poly(diaminophenylphosphazene) and poly-(diethoxyphosphazene) were also grafted onto carbon black surface by the treatment of PDCP-grafted carbon black with aniline and sodium ethoxide, respectively. Poly(organophosphazenes)-grafted carbon blacks produced stable colloidal dispersions in good solvents for grafted polymers. Furthermore, thermogravimetric analysis indicated that poly-(organophosphazenes)-grafted carbon blacks were stable in air about 300°C.     

Surface Grafting onto Barium Sulfate: Polymerization of Acrylamide Initiated by the System Consisting of Alcoholic Hydroxyl Groups on the Surface and Ceric Ion

Abstract

To modify the surface of barium sulfate, the grafting of polymers onto the surface by the polymerization of acrylamide (AAm) initiated by the system consisting of eerie ion and alcoholic hydroxyl groups on the surface was investigated. Barium sulfate modified by 12-hydroxystearate (BaSO₄-HS) was prepared by the reaction of barium chloride with sodium sulfate containing a small amount of sodium 12-hydroxystearate. The presence of 12-hydroxystearate groups on the BaSO₄ surface was confirmed by XPS analysis and infrared spectra. It was found that the graft polymerization of AAm is initiated by the system consisting of eerie ion and BaSO₄-HS to give poly (AAm)-grafted BaSO₄. This indicated that the grafted polymer chains are propagated from surface radicals formed by the redox reaction of eerie ion with 12-hydroxystearate groups on the surface. The polymerization rate (R _p) of AAm initiated by the redox system was given by R _p = k[AAm][Ce(IV)][BaSO₄-HS] where k is constant, [AAm] is AAm concentration, [Ce(IV)] is cerie ion concentration, and [BaSO₄-HS] is BaSO₄-HS concentration. The result suggested that in such an initiating system, the unimolecular termination of growing polymer radicals from the surface of BaSO₄ proceeds preferentially. Furthermore, by grafting of poly(AAm) onto the BaSO₄-HS surface, the wettability of the surface was found to turn from hydrophobic to hydrophilic.     

Heat-Resistant Polymer-Grafted Carbon Black: Grafting of Poly(Amide-Imide) Onto Carbon Black

Aromatic poly(amide-imide) with terminal isocyanate groups (PAINCO) was prepared by the polycondensation of trimellitic anhydride and a slight excess of 4,4′-diphenylmethane diisocyanate in N-methyl-2-pyrrolidone (NMP) at 160°C for 20 h. PAI was effectively grafted onto the surface by the reaction of PAI-NCO with carbon black: the percentage of grafting onto FW 200 and Neospectra II was determined to be 41.2 and 39.5%, respectively. When the carboxyl and phenolic hydroxyl groups on carbon black were blocked by treatment with diazomethane, the grafting of PAI-NCO onto the treated carbon black does not proceed. Therefore, it is concluded that PAI-NCO reacts with the carboxyl and phenolic hydroxyl groups on carbon black and PAI is grafted through amide and urethane bonds, respectively. The reaction of PAI-NCO with carbon black was accelerated by the addition of amines as catalyst and by raising of the reaction temperature. Thermogravimetric analysis indicated that PAI-grafted carbon black was stable in air up to about 300°C. The PAI-grafted carbon black was found to give a stable colloidal dispersion in NMP.     

Radical polymerization of methyl methacrylate initiated by an enolizable ketone–carbon black system

The polymerization of methyl methacrylate (MMA) initiated by an enolizable ketone (R₁? CO? CH₂? CO? R₂)-carbon black system was investigated. Although enolizable ketone itself could not do so, the polymerization of MMA was initiated by enolizable ketone in the presence of carbon black. In addition, a chloranil-enolizable ketone system was able to initiate the polymerization of MMA. It was found that the enol form of the ketone and quinonic oxygen groups on the carbon black surface played an important role in the initiation system; namely, it was considered that the polymerization was begun by the ketone radical (R₁? CO? CH? CO? R₂) formed by a one-electron transfer reaction from enolate ion to quinonic oxygen groups. The effect of solvent on the process was also studied. The rate of the polymerization increased, depending on the solvent used, in the following order: benzene < 1,4-dioxane < dimethyl sulfoxide < N,N-dimethylformamide < N-methyl-2-pyrrolidone. Furthermore, it became apparent that during the polymerization poly(methyl methacrylate) was grafted onto the carbon black surface (grafting ratio was ca. 40% when benzene was used as solvent) and the carbon black obtained gave a stable colloidal dispersion in organic solvent.     

乙烯基单体在炭黑表面上的接枝聚合

讨论了分别在铈离子体系，正丁基锂体系，过渡金属离子乙酰丙酮铜（Ⅱ）以及焦磷酸络锰（Ⅲ）体系的作用下，炭黑与乙烯基单体的接枝聚合．研究了引发剂浓度、单体浓度、反应时间对接枝聚合反应的影响．利用ＦＴ ＩＲ分析确证了炭黑表面的接枝反应，利用ＴＥＭ表征了接枝炭黑的形态．结果表明，在所研究的多种炭黑表面接枝聚合体系中，正丁基锂体系的接枝率最高，可达２００％．而各种氧化还原体素的接枝率只能达到３０％左右．表面接枝后的炭黑在介质中的分散稳定性明显改善．     

Cationic grafting from carbon black. VII. Grafting of polyacetals by cationic ring-opening polymerization of trioxane and 1,3-dioxolane initiated by CO+ClO4− groups on carbon black

The cationic ring-opening polymerization of trioxane and 1,3-dioxolane was found to be initiated by CO⁺CIO₄^? groups on a carbon black surface, which were introduced by the reaction of COCI groups with AgCIO₄. The activation energy of the ring-opening polymerization of trioxane was estimated to be 15.5 kcal/mol. In the polymerization system, poly(oxymethylene) and poly(1,3-dioxolane) formed were effectively grafted onto carbon black depending upon the propagation of these polymers from the carbon black surface; for instance, the grafting ratio of poly(oxymethylene) onto carbon black increased with an increase in conversion and went up to about 180%. Although the grafted chain of poly(oxymethylene) was subject to stepwise thermal depolymerization from the chain ends, the thermal stability of poly(oxymethylene)-grafted carbon black was improved by acetylation of hemiformal end groups. The molecular weight of ungrafted poly(oxymethylene) formed in the polymerization was determined to be 1.8–2.0 × 10⁴. Furthermore, the copolymerization of trioxane with 1,3-dioxolane, styrene, and other comonomers initiated by CO⁺CIO₄^? groups and the thermal stability of these acetal copolymer-grafted carbon black were investigated.     

Encapsulation of silica nanoparticles by redox-initiated graft polymerization from the surface of silica nanoparticles

This study describes a facile and versatile method for preparing polymer-encapsulated silica particles by ‘grafting from’ polymerization initiated by a redox system comprising ceric ion (Ce⁴⁺) as an oxidant and an organic reductant immobilized on the surface of silica nanoparticles. The silica nanoparticles were firstly modified by 3-aminopropyltriethoxysilane, then reacted with poly(ethylene glycol) acrylate through the Michael addition reaction, so that hydroxyl-terminated poly(ethylene glycol) (PEG) were covalently attached onto the nanoparticle surface and worked as the reductant. Poly(methyl methacrylate) (PMMA), a common hydrophobic polymer, and poly(N-isopropylacrylamide) (PNIPAAm), a thermosensitive polymer, were successfully grafted onto the surface of silica nanoparticles by ‘grafting from’ polymerization initiated by the redox reaction of Ce⁴⁺ with PEG on the silica surface in acid aqueous solutions. The polymer-encapsulated silica nanoparticles (referred to as silica@PMMA and silica@PNIPAAm, respectively) were characterized by infrared spectroscopy, thermogravimetric analysis, and transmission electron microscopy. On the contrary, graft polymerization did not occur on bare silica nanoparticles. In addition, during polymerization, sediments were observed for PMMA and for PNIPAAm at a polymerization temperature above its low critical solution temperature (LCST). But the silica@PNIPAAm particles obtained at a polymerization temperature below the LCST can suspend stably in water throughout the polymerization process.     

Radical grafting from glass fiber surface: Graft polymerization of vinyl monomers initiated by azo groups introduced onto the surface

This paper describes the radical graft polymerization of vinyl monomers from glass fiber surface initiated by alkylazo groups introduced onto the fiber surface. The introduction of azo groups onto the glass fiber surface was achieved by reaction of isocyanate groups which were previously attached onto the surface with two kinds of azo initiators, 4,4′-azobis(4-cyanopentanoic acid) (ACPA) and 2,2′-azobis(2-cyanopropanol) (ACP). The amounts of surface azo groups introduced by ACPA and ACP were both determined to be 1.3 × 10⁻⁵ mol g⁻¹ by nitrogen analysis. The radical graft polymerization of methyl methacrylate (MMA) was found to be initiated in the presence of the glass fiber having surface azo groups. During the polymerization, part of resultant poly(MMA) grafted onto the fiber surface through propagation of the polymer from the surface radicals produced by the decomposition of the azo groups. The percentage of grafting of poly(MMA) reached 48.1% after 24 h. The graft polymerizations of other monomers, such as styrene, N-vinylcarbazole, and acrylic acid, were also initiated by the surface azo groups, and the corresponding polymer effectively grafted onto the surface. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2121–2128, 1999     

Grafting of Polymers Having Pendant Peroxycarbonate Groups Onto Carbon Black and Postpolymerization of Vinyl Monomers

Abstract

Postpolymerization of vinyl monomers initiated by pendant peroxycarbonate groups of grafted polymer chains on carbon black (CB) was investigated. The grafting of polymers having pendant peroxycarbonate groups onto CB was achieved by the trapping of polymer radicals formed by the thermal decomposition of copolymers of t-butylperoxy-2-methacryloyloxyethyl-carbonate (HEPO) with vinyl monomers such as vinyl acetate (VAc), styrene (St) and methyl methacrylate (MMA). The copolymers having pendant peroxycarbonate groups were prepared by copolym-erization of HEPO with vinyl monomers using azo initiator under irradiation of UV light at room temperature. The amount of remaining pendant peroxycarbonate groups of the poly(VAc-co-HEPO)-grafted CB obtained from the reaction at 90°C was maximum and decreased above the temperature. Furthermore, the postpolymerization of vinyl monomers, such as St, MMA, and VAc was initiated in the presence of poly(VAc-co-HEPO)-grafted and poly(St-co-HEPO)-grafted CB and the corresponding polymers were postgrafted onto CB to give branched polymer-grafted CB. The percentage of poly(St)-postgrafting (proportion of post-grafted poly(St) to poly(MMA-co-HEPO)-grafted CB used) increased with increasing polymerization time, but became constant at 20% after 4 hours.     

Preparation of amphiphilic graft copolymer with polyisoprene backbone by combination of anionic polymerization and “click” reaction

A novel graft copolymer consisting of polyisoprene backbone and hydrophilic side chain with carbamic acid ester functional group was prepared via thiol-ene"click"reaction and alcohol-isocyanate reactions.Polyisoprene was synthesized by anionic polymerization using n-butyl lithium as initiator,and the pendant hydroxyl groups were introduced by the thiol-ene reaction of mercaptoethanol with the double bond of 1,2-addition units of PI backbone in the presence of radical initiator azobisisobutyronitrile. Isocyanate end group capped poly(ethylene glycol)(mPEG-NCO) was grafted onto the PI backbone through alcoholisocyanate reaction between the pendant hydroxyl groups and isocyanate group of mPEG-NCO.The structure of the graft copolymer were characterized and confirmed by means of size-exclusion chromatography,~1H NMR and FTIR spectroscopy.     

丙烯酸乙酯在炭黑表面的阴离子接枝聚合研究

丙烯酸乙酯在炭黑表面的阴离子接枝聚合研究蒋子铎，刘长生，刘安华，吴璧耀（武汉化工学院精细化工系武汉４３００７３）关键词炭黑，丙烯酸乙酯，阴离子聚合，接枝聚合由于炭黑粒子自聚力强，存在难分散、易絮凝的特点，影响其在高分子材料中的分散和分散稳定性．对此国...     

Grafting of Polymers onto a Crosslinked Polymer Carrying Carboxyl Groups as a Model Compound for Carbon Black

Abstract

A cation-exchange resin (a crosslinked polymer carrying carboxyl groups) was used as a model compound for carbon black, and the grafting of several polymers to the resin was investigated. Reaction of acyl chloride groups that had been placed on the ion-exchange resin with polymers having hydroxyl or amino groups, such as polypropylene glycol, polyethylene glycol, polybutadiene glycol, polyvinyl alcohol, silicone diol, silicone diamine, and polyethyleneimine, resulted in grafting to the ion-exchange resin. In further experiments, primary amino groups were placed on the cation-exchange resin by reaction of acyl chloride groups with ethylenediamine. It was found that ring-opening polymerization of γmethyl L-glutamate N-carboxyanhydride is initiated by the amino groups on the resin, and polypeptide was grafted from the cation-exchange resin. Therefore, the reactivity of carboxyl groups on the resin was found to be similar to that on carbon black. However, carboxyl groups on the resin failed to initiate the cationic polymerization of vinyl monomers, in contrast to those on carbon black. This suggested that the acidity of carboxyl groups on carbon black is greater than on the cation-exchange resin.     

Cationic Grafting of Vinyl Polymers onto a Carbon Whisker,Initiated by Acylium Perchlorate Groups Introduced onto the Surface

Abstract

The cationic graft polymerization of vinyl monomers onto a carbon whisker, vapor-grown carbon fiber, initiated by acylium perchlorate groups introduced onto the surface, was investigated. The introduction of acylium perchlorate groups onto a carbon whisker was achieved by the treatment of a carbon whisker having acyl chloride groups, which were introduced by the reaction of surface carboxyl groups with thionyl chloride, with silver perchlorate in nitrobenzene. It was found that the cationic polymerization of vinyl monomers, such as styrene, indene, N-vinyl-2-pyrrolidone, and n-butyl vinyl ether, is initiated by acylium perchlorate groups on a carbon whisker. In the polymerization, the corresponding vinyl polymers were grafted onto a carbon-whisker surface based on the propagation of polymer from the surface: the percentage of grafting of polystyrene and polyindene reached 42.5 and 100.3%, respectively. The percentage of polystyrene grafting decreased with increasing polymerization temperature because of preferential chain transfer reactions at higher temperatures. Polymer-grafted carbon whisker gave a stable colloidal dispersion in a good solvent for grafted polymer.     

Radical graft polymerization of vinyl monomers onto nanoparticles in ionic liquid initiated by azo groups introduced onto the surface

The radical graft polymerization of vinyl monomers, such as styrene and methyl methacrylate, initiated by azo groups introduced onto silica nanoparticle and carbon black surfaces in room temperature ionic liquid (IL) were investigated. In this work, 1‐butyl‐3‐methylimidazolium hexafluorophosphate ([C₄mim][PF₆]) was used as IL. The percentage of polystyrene and poly(methyl methacrylate) grafting onto silica nanoparticle and carbon black increased with increasing reaction time. The percentage of grafting in IL was much larger than that in 1,4‐dioxane. The molecular weight of polystyrene grafted onto the silica surface in IL was almost equal to that in 1,4‐dioxane. The result indicates that the amount of grafted polystyrene in IL is five times that in 1,4‐dioxane. This may be due to the fact that lifetime of the surface radical formed by the group of azo is prolonged because of high viscosity of IL. Therefore, the surface azo groups were effectively used as initiating sites for the graft polymerization. In addition, the reduction of waste solvent was achieved by use of IL as reaction solvent, because unreacted monomer could be removed under vacuum after the reaction and the reuse of IL was easily achieved. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1143–1149, 2007     

Coordinated radical polymerization and redox polymerization of acrylamide by ceric ammonium nitrate

The ceric salt-initiated polymerization on acrylamide and graft copolymerization of acrylamide onto cellulose were studied. The mechanism of the ceric salt-initiated polymerization of acrylamide in the homopolymerization system can be explained by a radical mechanism based upon Ce⁴⁺-coordinated acrylamide, and the mechanism of the ceric salt-initiated graft copolymerization of acrylamide onto cellulose can be explained in two ways: a free-radical mechanism with the ceric—cerous redox system, and a radical mechanism based upon Ce⁴⁺-coordinated acrylamide. The velocities of initiation, propagation, and termination in the redox mechanism are quite different from those in the coordinated radical mechanism. From the infrared absorption and nuclear magnetic resonance spectra measurements it is concluded that the structure of the ceric-coordinated acrylamide is the π-complex.     

Reinforcement of Natural Rubber from Hydroxyl-Terminated Liquid Natural Rubber Grafted Carbon Black. I. Grafting of Acyl Chloride Capped Liquid Natural Rubber onto Carbon Black

Abstract

This paper deals with the grafting of acyl chloride capped liquid natural rubber (LNR–COCl) onto carbon black by the reaction of the acyl chloride group with the phenolic hydroxyl group on the surface. LNR–COCl was prepared by the reaction of hydroxyl-terminated liquid natural rubber (HTNR) with adipoyl dichloride. The percentage of grafting was estimated to be 18–21% depending on the grafting temperature and the molecular weight of HTNR used. It increased with an increase in the molecular weight of LNR–COCl. The LNR grafted onto carbon black was investigated by IR spectroscopy and by hydrolysis with a dilute THF solution of KOH. It was shown that LNR grafted onto the carbon black surface with ester bonds.     

丙烯酸在炭黑表面接枝聚合研究

丙烯酸在炭黑表面接枝聚合研究吴壁耀，刘安华，邵兰英，蒋子铎（武汉化工学院精细化工系，武汉，４３００７３）关键词接技聚合，炭黑，Ｚｅｔａ电位，表面改性炭黑是由大量的原生粒子聚集而成的．该聚集体表面积大、表面又含有丰富的极性基因，故在炭黑／涂料树脂体系中...     

Introduction of peroxide groups onto carbon black surface by radical trapping and radical graft polymerization of vinyl monomers initiated by the surface peroxide groups

The introduction of peroxide groups onto carbon black surface was achieved through the trapping of the peroxide radicals formed by the decomposition of polymeric peroxide, such as poly(tetraethylene glycol peroxyadipate) (ATPPO), and bis-peroxide, such as 1,1′-bis (t-butyldioxy)cyclohexane (Perhexa-C), by the surface: the amount of peroxide groups introduced onto carbon black surface by the treatment with ATPPO and Perhexa-C were determined to be 0.07 mmol/g and 0.12 mmol/g, respectively. The polymerization of vinyl monomers with positive e-value, such as methyl methacrylate and 2-hydroxyethy methacrylate, was successfully initiated by the peroxide groups introduced onto carbon black surface. During the polymerization, the corresponding polymers were effectively grafted onto the surface as a result of the propagation of polymer from the surface radicals formed by decomposition of the peroxide groups. The polymerization of vinyl monomers with negative e-value, such as styrene and vinyl acetate, however, was scarcely initiated by the peroxide groups on carbon black. This may be due to the fact that surface active radicals, which were formed by the hydrogen abstraction from carbon black by fragment radicals, inhibit the polymerization of vinyl monomers with negative e-value. © 1996 John Wiley & Sons, Inc.