Determination of Tert-Butoxy Endgroups in Polymers: The Mode of Reaction of Tert-Butoxy Radicals with Methyl Methacrylate and Styrene

A simple technique has been devised for the determination of tert-butoxy endgroups in poly(methyl methacrylate) and polystyrene. The method is based on cleavage of the tert-butyl ether with boron trichloride and analysis of the resulting tert-butyl chloride by gas-liquid chromatography. In polystyrene, tert-butoxy endgroups were also determined by dealkylation with trifluoroacetic acid, followed by reaction of the resulting hydroxy endgroups with o-sulfobenzoic anhydride and analysis for sulfonate by the dye-partition technique with methylene blue reagent. From these analyses it was possible to conclude that tert-butoxy radicals, derived from the decomposition of di-tert-butyl peroxalate (DBPOX), initiated styrene polymerization largely by direct addition, whereas in their reaction with methyl methacrylate (MMA) both direct addition and hydrogen abstraction from the monomer were important processes. The extent of hydrogen abstraction was determined from the yield of tert-butanol in the reaction of DBPOX with MMA.     

Chemical recycling of networked polystyrene derivatives using subcritical water in the presence of an aminoalcohol

Subcritical water is a benign and effective media for polymer degradation. On subcritical water treatment in the presence of an aminoalcohol, unsaturated polyesters crosslinked with styrene were decrosslinked, and a linear polystyrene derivative bearing hydroxy-terminated side-chains was recovered. After modification of the hydroxy groups with maleic anhydride, the polystyrene derivative was re-crosslinked with styrene to form a networked structure again. The resulting solid was degradable by subcritical water treatment in the presence of the aminoalcohol to give another polystyrene derivative bearing hydroxy groups. These processes could be repeated successfully, demonstrating the applicability as a novel recycling system of thermosetting resins. The polystyrene derivative was also re-crosslinked again on heating with an alternative copolymer of styrene and maleic anhydride due to the formation of linkage between the hydroxy groups and carboxylic anhydride moieties.     

Chemical Functionalisation of Vinyl Polymers to Obtain Heparin-Like Materials

Vinyl polymers such as poly(ethylene-co-vinyl alcohol) (EVAL) and polyallylamine (PALA) both commercially available were chemically modified by introduction of carboxylic and sulfonate groups to obtain polymeric materials with improved haemocompatibility. The introduction of carboxyl groups was carried out by reaction of EVAL's hydroxy groups with acrylonitrile followed by basic hydrolysis of  CN groups. Amino groups of PALA were transformed into sulfonate groups by reaction with pyridine-SO₃ complex. Influence of reagents molar ratio, temperature and reaction time on the carboxylation degree was evaluated. In particular, yields of 86% (EVAL-CN 0.52) and 30% (EVALCOOH 0.16) were obtained for the cyanoethylation and the hydrolysis reaction of the  CN groups, respectively, whereas a sulfonation of 24% of the PALA amino groups was found. The functionalised polymers were characterized by physicochemical measurements. Preliminary biological tests proved the importance of strong acidic groups on the anticoagulant properties of the polymeric materials.     

Synthesis of hydroxy sulfonate surfactants

The selective synthesis of sulfonate surfactants with side chains containing ether- and hydroxy groups was carried out using cyclic sulfates as epoxide analogues. The main chain was elaborated from 1,2-dodecane sulfate by the addition of various hydroxy/alkoxysulfonates. Ethyleneoxy- and 1,2-propyleneoxy- groups were introduced using ethylene sulfate and 1,2-propylene sulfate, respectively.     

Competing sulfonylation and phosphonylation following rearrangement of an O-sulfonyl-N-phosphinoylhydroxylamine with tert-butylamine: demonstration of a phosphonamidic-sulfonic anhydride intermediate and 18O-labelling evidence on how it may be formed

Reaction of R(Ph)P(O)N HOSO2Bn (R = PhMeCH) with Bu(t)NH2 in CH2Cl2 gives a mixture of RP(O)(NHPh)-NHBu(t) and Bu(t)NHSO2Bn, the proportion of the sulfonamide increasing steadily (14.6% to 32.9%) as the concentration of amine is reduced (8.0 to 0.2 mol dm(-3)). Apparently the phenyl and sulfonate groups in the substrate become transposed, giving a phosphonamidic-sulfonic anhydride RP(O)(NHPh)OSO2Bn which then reacts at the phosphorus or sulfur atom to give the final products; an authentic sample of the anhydride gives similar mixtures of products. Substrate labelled with 18O in the sulfonyl position (57 mol% one 18O atom) gives sulfonamide containing most but not all of the label (43.7 mol% one 18O atom with 2.0 mol dm(-3) amine). This implies partial equilibration of the three sulfonate oxygen atoms during rearrangement, or after the anhydride intermediate has been formed.     

Preparation,characterisation and gas transport properties of trifluoroacetylated ethyl cellulose

A mixed ester of ethyl cellulose (EC) has been prepared by reaction of trifluoroacetic anhydride with the residual hydroxy groups of ethyl cellulose. The mixed ester is soluble in tetrahydrofuran, dichloromethane, chloroform, benzene and pyridine. FTIR and NMR spectra show that hydroxy groups of ethyl cellulose were replaced by trifluoroacetoxy groups. The trifluoroacetyl ethyl cellulose (TFAEC) has higher selectivity for oxygen relative to nitrogen, in gas transport, than unmodified EC. Annealing at an elevated temperature further improves selectivity for oxygen, whilst subsequent ageing at ambient temperature partially reduces oxygen selectivity. The tensile strength of TFAEC is virtually the same as that of unmodified EC, but the elongation to break is 200% higher than for EC.     

Oxidative-substitution reactions of polycyclic aromatic hydrocarbons with iodine(III) sulfonate reagents

Polycyclic aromatic hydrocarbons (PAH) undergo regioselective oxidative-substitution reactions with iodine(III) sulfonate reagents in dichloromethane to give the corresponding aryl sulfonate esters. The use of [hydroxy(tosyloxy)iodo]benzene in conjunction with trimethylsilyl isothiocyanate leads to thiocyanation of the PAH nucleus.     

Polyimides having pendant hydroxy and acetoxy groups. I. Synthesis of polyimides from pyromellitimide and bisepoxides

Polyimides having pendant hydroxy groups were prepared by addition of pyromellitimide with bisepoxides. Tertiary amines and quaternary ammonium halides were effective as a catalyst. The polyimides were soluble in dichloroacetic acid and had inherent viscosities in the range 0.16–0.19 dl/g. Thermogravimetric analysis showed that a rapid weight loss of the polymers occurred at about 400°C. The pendant hydroxy groups were easily acetylated by treating the polymers with a mixture of acetic anhydride and pyridine. The acetylated polyimides were soluble in dimethylformamide, dimethylacetamide, and dioxane and melted at 120–150°C.     

Synthesis and characterization of poly[(3,4-dihydro-2h-pyran)-alt-(maleic anhydride)] and its derivatives: Biologically active polymers

The syntheses of several monomers, bioactive poly[(3, 4-dihydro-2H-pyran)-alt-(maleic anhydride)] and its derivatives, which have different substituents (e.g., acetoxy, methoxy, ethoxy, methoxycarbonyl, formyl, acetoxymethyl, and tosyloxymethyl groups) in the 2-position of the tetrahydropyran ring of the copolymer backbone, are described. The alternating sequences in copolymers of the dihydropyran derivatives and maleic anhydride were obtained from the equimolar and larger ratios of maleic anhydride to dihydropyran derivative at the onset of the copolymerization. The molecular weights of the copolymers were found to be low (M_n = 1000–7500) due to a transfer reaction of the dihydropyran derivatives. Hydrolyses of the anhydride groups in the copolymers without catalyst afforded poly[(dihydropyran)-alt-(maleic acid)] and its derivatives, whereas an additional three copolymers having substituents, e.g., hydroxy, hydroxymethyl, and carboxyl groups were obtained by hydrolyses of the pendent groups (acetoxy, acetoxymethyl, and methoxycarbonyl) with the aid of a hydroxide catalyst. Carbamoyl groups on the polymers were obtained from ammonolysis of methoxycarbonyl groups. The polymers having mercaptomethyl or aminomethyl groups were obtained by substitution of hydrogen sulfide or ammonia for tosyloxylmethyl groups.     

Acetylation of lagochilin

The acetylation of lagochilin and its derivatives with acetic anhydride in the presence of pyridine has been studied by PMR spectroscopy. It has been shown that the manifestation of the polyfunctionality of lagochilin in acetylation reactions with acetic anhydride is connected with a change in the nature of the process of solvation of the reaction forms with the subsequent replacement of the hydrogen atoms of the hydroxy groups by acetyl groups.V. I. Lenin Tashkent State University. Translated from Khimiya Prirodnykh Soedinenii, No. 1, pp. 46–49, January–February, 1980.     

Transparent Films from CO2‐Based Polyunsaturated Poly(ether carbonate)s: A Novel Synthesis Strategy and Fast Curing

Transparent films were prepared by cross‐linking polyunsaturated poly(ether carbonate)s obtained by the multicomponent polymerization of CO₂, propylene oxide, maleic anhydride, and allyl glycidyl ether. Poly(ether carbonate)s with ABXBA multiblock structures were obtained by sequential addition of mixtures of propylene oxide/maleic anhydride and propylene oxide/allyl glycidyl ether during the polymerization. The simultaneous addition of both monomer mixtures provided poly(ether carbonate)s with AXA triblock structures. Both types of polyunsaturated poly(ether carbonate)s are characterized by diverse functional groups, that is, terminal hydroxy groups, maleate moieties along the polymer backbone, and pendant allyl groups that allow for versatile polymer chemistry. The combination of double bonds substituted with electron‐acceptor and electron‐donor groups enables particularly facile UV‐ or redox‐initiated free‐radical curing. The resulting materials are transparent and highly interesting for coating applications.     

Multifunctional coupling agents. Part 4: Block copolymers based on amino terminated polyamide-12 and carboxy terminated poly(butylene terephthalate)

A carboxy terminated poly(butylene terephthalate) (PBT) was obtained by quantitative reaction of a hydroxy terminated PBT with succinic anhydride. Subsequent melt mixing with an amino group terminated PA12 did not result in the formation of linking groups between the components. Instead, the formation of succinimide terminal groups on the polyamide-12 (PA12) chains was observed.The same conversion in presence of a bifunctional coupling agent possessing one oxazoline and one oxazinone group yielded PA12/PBT block copolymers in high extent. DSC and microscopic measurements showed that a phase separated morphology is predominant.     

Functionalized acrylic polyhydroxy urethanes as molecular tool box for photocurable thermosets and 3D printing

Liquid urethane (meth)acrylates represent attractive components of photocurable thermosets for applications ranging from coatings and adhesives to 3D printing. Herein we tailor liquid polyfunctional urethane methacrylates (UMA) derived from acrylic polyhydroxy urethanes. Cyclic carbonate methacrylates react with diamines to form dihydroxy-functional urethane dimethacrylates. In an “one-pot” process the hydroxy groups are functionalized either by reaction with 2-isocyanatoethyl methacrylate (IEMA) or by esterification with methacrylic anhydride (MAA) and acetic anhydride (AA). The hydroxy group esterification substantially lowers the resin viscosity (26–156 Pa•s). Hydroxy functionalization with IEMA and MAA affords tetrafunctional methacrylates. The corresponding photo-cured thermosets exhibit higher crosslinking density and improved stiffness as reflected by increasing the Young's modulus from 2900 to 3700 MPa combined with increasing the glass temperature from 135 to 204°C. Hence, this facile molecular UMA design enables to control functionality and thermoset properties over a wide range and meets the demands of 3D printing applications.     

Terminal anhydride functionalization of polystyrene

Polystyrene chains with terminal anhydride groups were synthesized by direct chain transfer reaction between poly(styryl) lithium and trimellitic anhydride chloride (TMAC) and by the alkoxy-de-halogenation reaction between TMAC and hydroxy terminated polystyrene. Pyridine was used as a catalyst for these nucleophilic substitution reactions. For the direct reaction a poly(styryl) lithium with M?_n ～ 1000 (a low MW was used for characterization purposes) was prepared in an argon purged reactor and then introduced into an excess of trimellitic anhydride chloride. Due to the nature of our reaction system, the molecular weight distributions obtained were broader than those possible using more stringent high vacuum techniques. Hydroxy terminated polystyrenes with M?_n = 3,000 and 13,000 obtained elsewhere were used for the indirect addition of terminal anhydride groups. ¹H-NMR spectroscopy, gel permeation chromatography (GPC), and FTIR spectroscopy were used to characterize the reaction products. A maximum yield of 61% for the direct functionalization route and 85% for the indirect functionalization route using hydroxyl terminated polystyrene were achieved. The higher yield of the indirect method seems to be the result of the relatively mild reactivity of the hydroxyl group.     

Potential drug delivery systems from maleic anhydride copolymers and phenothiazine derivatives

New functionalized derivatives of phenothiazine containing amino or hydroxy groups with potential pharmacological properties were synthesized and characterized. They were reacted with maleic anhydride copolymers in order to obtain conjugates which can be used as controlled-release systems.     

Synthesis and characterization of styrenic polymers with pendant pyrazole groups. II

The synthesis of styrenic monomers that have pyrazolic or bipyrazolic pendant groups is described. Their homopolymerization and their copolymerization with maleic anhydride (MA) and N-(3-acetoxy propyl) maleimide is reported. The monomers were prepared from the Williamson reaction between 2-pyridine carbinol, hydroxy monopyrazole, hydroxy bipyrazole, and chloromethyl styrene. The homopolymerizations of such styrenic monomers were tried under different conditions, which led to low molecular weight polymers with a high polydispersity. However, alternating copolymers were obtained using maleic anhydride or N-(3-acetoxy propyl) maleimide as comonomers, as shown by ¹H-NMR, elemental analysis, and reactivity ratios r₁ and r₂. Furthermore, the hydrolysis of the acetate function of different copolymers was performed quantitatively. Unlike the acetoxy copolymers, such products do not have any glass transition temperature. Thermogravimetric investigations have shown that these copolymers exhibit good thermostability. © 1994 John Wiley & Sons, Inc.     

脂肪型超支化聚酯的端基改性研究

近年来 ,超支化聚合物以其独特的结构和性能而受到广泛的重视 ,已成为 2 1世纪高分子科学研究的重要方向[1～ 4 ] .超支化聚合物通常是通过 AB2 型单体的缩聚来合成的 ,由于超支化聚酯的单体容易合成 ,因此 ,有关超支化聚酯的研究最为深入 .目前所报道的脂肪型超支化聚酯都是以 2 ,2 -二甲醇基丙酸为原料来合成的 ,Malstrom等 [5～ 7]系统研究了该聚合物的合成及结构 .最近 ,Johansson[8]采用丙烯酰氯对该聚合物端基改性 ,获得了可用于紫外光固化的涂料 ,但是所采用的合成及提纯方法都很复杂 ,并且需要很长的反应时间 .本文采用一种新的…     

Syntheses and reactions of some 2,3-disubstituted pyrazine monoxides

The reactions of 2,3-dimethyl- ( 4 ), 2,3-diphenyl- ( 6 ), and 2-methyl-3-phenyl-pyrazine monoxides ( 8 and 9 ) with phosphoryl chloride and acetic anhydride resulted in giving monochloro- and monacetoxy-pyrazines in almost all cases. However, the reaction of 6 with acetic anhydride afforded exceptionally a diacetoxydihydro-pyrazine. These products were converted further to hydroxy or dichloro derivatives.     

Enantioselektive Reaktionen an porphinoiden Nickelkomplexen

Enantioselective Reactions on Porphine Type Nickel Complexes The thermodynamically controlled addition of alcohols to (+)-(1R)-[1-methyl-8H-HDP]nickelperchlorate ( 1 ; e.e. 92%) yields exclusively the corresponding cis-1,11-disubstituted porphinoids. Chemical transformation of functional groups in the alkoxy side-chain of the chiral addition product followed by acid catalyzed elimination yields the derived alcohols and 1 . By this procedure, the following enantioselective transformations were studied: methylation of meso-2,3-butandiol ( 5 ) to (+)-(2R,3S)-3-methoxy-2-butanol ( 8a ; e.e. 87%), diimide reduction of 2-ethylallyl alcohol ( 9 ) to (+)-(2R)-2-methyl-1-butanol ( 12a ; e.e. 15%), and hydride reduction of 4-hydroxy-2-butanone ( 13 ) to (+)-(3S)-1,3-butandiol ( 16a ; e.e. 20%). Addition of 2,2-dimethyl-1,3-propandiol ( 17 ) to 4 , followed by esterification of the free hydroxy group with trifluoromethanesulfonic anhydride and solvolysis of the sulfonate 19 yielded a bridged complex with unrearranged alkyl chain for which structure 20 is proposed.     

Degradation of crosslinked unsaturated polyesters in sub-critical water

The degradation of unsaturated polyesters crosslinked with styrene was performed in sub-critical water (SCW) in the absence and presence of organic additives. The unsaturated polyesters were de-crosslinked by hydrolysis of ester chains to form polystyrene derivatives on SCW treatment at 300 °C. With an increase in treating time, carboxylic acid groups in the polystyrene derivatives were turned into carboxylic anhydride groups in SCW. The de-crosslinking rate was much enhanced on SCW treatment in the presence of hydroxy compounds with a long alkyl chain and alkylamines, while carboxylic acids, benzenesulfonate salts, and quaternary ammonium salts were ineffective even though they had a long alkyl chain. The degree of de-crosslinking was reduced in the presence of diamines and amino acids because re-crosslinking at both ends of the additive molecules proceeded.