Head-to-Head Polymers

Head-to-head polymers of α-olef ins, vinyl and acrylic monomers synthesized by indirect methods have shown similarities and differences in some of their behavior when compared to their counterparts of the common head to tail polymers. Head-to-head polyole-fins, such as polystyrene or polypropylene, were prepared by 1,4-polymerization of the corresponding 2,3-disubstituted butadienes-1,3 followed by hydrogenation of the remaining double bonds, polyacrylates by alternating copolymerization of ethylene and maleic anhydride, followed by esterification of the polymer. Head-to-head polyacrylates were reduced to poly(allyl alcohols) which were then acrylated to the acetates and benzoates. Head-to-head polyvinyl halides) were obtained from 1,4-polybutadiene by chlorination or bromination. The head-to-head polymers were characterized by spectroscopic analysis, some molecular weight characterization was done, and their thermal behavior was studied. The blending behavior with the corresponding head-to-tail polymers was studied in some cases; in others (head-to-head polystyrene), the blending with other polymers was investigated and the codegradation of the polymers was evaluated.     

Pd(0)‐catalyzed polyaddition of bifunctional vinyloxiranes with 1,3‐dicarbonyl compounds: The synthesis of polymers containing hydroxy and carbonyl groups

The palladium(0)‐catalyzed polyaddition of bifunctional vinyloxiranes [1,4‐bis(2‐vinylepoxyethyl)benzene ( 1a ) and 1,4‐bis(1‐methyl‐2‐vinylepoxyethyl)benzene ( 1b )] with 1,3‐dicarbonyl compounds [methyl acetoacetate ( 4 ), dimethyl malonate ( 6 ), and Meldrum's acid ( 8 )] was investigated under various conditions. The polyaddition of 1 with 4 was carried out in tetrahydrofuran with phosphine ligands such as PPh₃ and 1,2‐bis(diphenylphosphino)ethane (dppe). Polymers having hydroxy, ketone, and ester groups in the side groups ( 5 ) were obtained in good yields despite the kinds of ligands employed. The number‐average molecular weight value of 5b was higher than that of 5a . The polyaddition of 1b and 6 was affected by the kinds of ligands employed. The corresponding polymer 7b was not obtained when PPh₃ and 1,2‐bis(diphenylphosphino)ferrocene were used. The polyaddition was carried out with dppe as the ligand and gave polymer 7b in a good yield. The molecular weight of the polymer obtained from 1b and 8 was much higher than those of polymers 5b and 7b . The polyaddition with Pd₂(dba)₃ · CHCl₃/dppe as a catalyst (where dba is dibenzylideneacetone) produced polymer 9b in a 92% yield (number‐average molecular weight = 45,600). The stereochemistries of all the obtained polymers were confirmed as an E configuration by the coupling constant of the vinyl proton. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2487–2494, 2002     

Polymerization of glycidol and its derivatives: A new rearrangement polymerization

Anionic (KOH) polymerization of glycidol, or its trimethylsilyl ether (TMSGE) followed by hydrolysis, gives a low molecular weight, largely amorphous polymer that is not the reported 1,3-polyglycidol but, based on ¹³C-NMR, largely a 1,4-poly(3-hydroxyoxetane) with much branching. This result is achieved by a simple rearrangement of the usual, propagating secondary oxyanion to a primary one. Substantial amounts of four dimers (5–10%), four trimers, and some tetramers were also found. One dimer was isolated and shown to be glycidyl glycerin, the usual thermal dimer from glycidol. Possible structures of the other dimers are proposed. The polymerization appears to begin with the rapid formation of the glycidoxy anion , formed by base abstraction of a proton from glycidol and by nucleophilic displacement of the SiMe₃ group from TMSGE. Other bases such as KOtert-Bu give similar 1,4 polymer for glycidol but, with TMSGE, there is considerable 1,3 polymerization. Detailed mechanisms are proposed. The polymer perpared from R-TMSGE with KOH was highly crystalline, high melting (166°C), H₂O soluble, isotactic poly(3-hydroxyoxetane). The cationic polymerization of tert-butyl glycidyl ether (TBGE) and TMSGE gave low molecular weight 1,3 polyethers. The TBGE polymer was all head-to-tail whereas the polyglycidol from TMSGE contained extensive head-to-head chain units with considerable branching. Mechanisms for these interesting differences are proposed.     

Preparation and Characterization of Head-to-Head Polymers. II. Head-to-Head Poly(methyl Acrylate)

Head-to-head poly(methyl acrylate) was prepared by esterification of the known alternating copolymer of ethylene and maleic anhydride. Some of the chemical,physical, and mechanical properties and the thermal degradation behavior of head-to-head poly(methyl acrylate) were studied and compared with those of head-to-tail poly(methyl acrylate). The T_g of the head-to-head polymer was higher than that of the head-to-tail polymer, but the solubilities of both types of polymers of comparable molecular weight were similar. Head-to-head poly(methyl acrylate) degraded thermally at approximately the same temperature and with a rate similar to head-to-tail poly(methyl acrylate). Unlike poly(methyl cinnamates) which cleanly degraded to monomers, poly(methyl acrylates), head-to-head and head-to-tail, degrade to very small molecules, such as CO₂, methanol, but also larger polymer fragments and char. Trace amounts of monomers (methyl acrylate) were also observed.     

Polymeric mesoions, 3. Synthesis of polymeric mesoionic 1,3-diazinium-olates via polymer analogous modification of a polythiourea from m-phenylenediamine and p-phenylene diisothiocyanate

Mesoionic poly(1,1′-(1,3-phenylene)-3,3′-(1,4-phenylene)-bis(5-decyl-2-decylthio-4,6-dioxo-1,3-diazine)) ( 6 ) was prepared by cyclisation of the isothiourea component of poly(1,1′-(1,3-phenylene)-3,3′-(1,4-phenylene)-bis(2-decylisothiourea)) ( 4 ) with decylmalonic acid (5) by use of dicyclohexylcarbodiimide (DCC). Polymer 4 was obtained by polymer analogous alkylation of poly(1,1′-(1,3-phenylene)-3,3′-(1,4-phenylene)-bisthiourea) ( 3 ). For comparison of spectroscopic data, 5-butyl-2-propylthio-4,6-dioxo-1,3-diphenyl-1,3-diazine ( 9 ) was synthesized as low molecular weight model compound.     

Preparation and Characterization of Head-to-Head Polymers. III. Head-to-Head Poly (methyl Crotonate)

Alternating copolymers of cis-butene-2 and maleic anhydride were esterfied to the methylester which corresponds to head to head (H-H) poly(methyl crotonate).

The chemical, physical, and mechanical properties and thermal degradation behavior of H-H poly (methyl crotonate) was studied and compared with the properties of head to tail (H-T) poly(methyl crotonate). This latter polymer was made by a known anionic polymerization technique and was, unlike the amorphous H-H polymer, partially crystalline. The T_g of H-H polymer was found to be higher than that of the H-T polymer. Thermal degradation behavior of H-H and H-T polymer was between the degradation behavior of H-H and H-T poly(methyl cinnamate) and poly (methyl acrylate). Poly (methyl crotonates) degraded to a substantial part to small molecules and char; methyl crotonate was found among the degradation products. H-H Poly (methyl crotonate) gave also butene-2 and a mixture of dimethyl maleate and dimethyl fumarate on pyrolysis.     

Monomer-isomerization polymerization. XIII. Monomer-isomerization polymerization of 1,4-cyclohexadiene with Ziegler-Natta catalyst

1,4-Cyclohexadiene underwent monomer-isomerization polymerization to yield poly(1,3-cyclohexadiene) with a Ziegler-Natta catalyst comprising TiCl₄–Al(C₂H₅)₃ catalyst with Al/Ti molar ratios of 0.5–3.0 at 60°C for 96 hr. Good yields of polymer were obtained (49.5% yield at Al/Ti = 3.0; [η] = 0.04 dl/g). The infrared and NMR spectra of the polymer were identical to those of poly-(1,3-cyclohexadiene), confirming that 1,4-cyclohexadiene first isomerizes to 1,3-cyclohexadiene and then homopolymerizes to give poly-1,3-cyclohexadiene. 1,3-Cyclohexadiene polymerized without isomerization easily in the presence of TiCl₃–Al(C₂H₅)₃ catalyst at Al/Ti molar ratios of 0.5–3.0 at 60°C for 3 hr (76.3% yield at Al/Ti = 3.0; [η] = 0.06 dl/g).     

3-acyl-1,5-benzodiazepines in the reactions of 5,5-dimethyl-2-formylcyclohexane-1,3-dione with certain 1,2-diaminobenzenes

Reaction of 5,5-dimethyl-2-formylcyclohexane-1,3-dione with 4-methyl-, 4-benzoyl-, and 4-nitro-1,2-diaminobenzenes gave the corresponding 2-(2-amino-4-methylphenylaminomethylene)-, 2-(2-amino-5-benzoylphenylaminomethylene)-, and 2-(2-amino-5-nitrophenylaminomethylene)-5,5-dimethylcyclohexane-1,3-diones. When treated with hydrochloric acid, they cyclize to 7-methyl-, 8-benzoyl-, and 8-nitro-3,3-dimethyl-2,3,4,5-tetrahydro-1H-dibenzo[b,e][1,4]diazepinon hydrochlorides. Under hydrolytic conditions the salts of 3,3,7-trimethyl-2,3,4,5-tetrahydro-1H-dibenzo[b,e][1,4]diazepinone and 3,3-dimethyl-2,3,4,5-tetrahydro-1H-dibenzo[b,e][1,4]diazepinone undergo the C₁₁−N₁₀ bond cleavage to give N-(2-aminophenyl)- and N-(2-amino-5-methylphenyl)-substituted 3-amino-2-formyl-5,5-dimethylcyclohex-2-enones. Ring opening of the hydrochlorides of 8-benzoyl-, and 3,3-dimethyl-8-nitro-2,3,4,5-tetrahydro-1H-dibenzo[b,e][1,4]diazepinones occurs at the C−N₅ bond and gives the starting enamines. Riga Technical University, Riga LV-1658, Latvia; Translated from Khimiya Geterotsiklicheskikh Soedinenii, N. 5, pp. 696–700, May, 1999.     

Hydrocarbon polymers containing six-membered rings in the main chain. Microstructure and properties of poly(1,3-cyclohexadiene)

The relationship between the microstructure and the properties of poly(1,3-cyclohexadiene)s, obtained by living anionic polymerization with an alkyllithium/amine system, and their hydrogenated derivatives are reported. The 1,2-bond/1,4-bond molar ratio of poly(1,3-cyclohexadiene) was determined by measuring 2D-NMR with the H H COSY method. The glass transition temperature of poly(1,3-cyclohexadiene) was found to rise with an increase in the ratio of 1,2-bonds to 1,4-bonds or with an increase of the number average molecular weight. The 1,2-bond of the polymer chain gives a high flexural strength and heat distortion temperature. Hydrogenated poly(1,3-cyclohexadiene) has the highest T_g (231°C) among all hydrocarbon polymers ever reported. 1,3-Cyclohexadiene–butadiene–1,3-cyclohexadiene triblock copolymer and 1,3-cyclohexadiene–styrene–1,3-cyclohexadiene triblock copolymer have high heat resistance and high mechanical strength. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1657–1668, 1998     

Synthesis of naphtho[2',3':4,5]imidazo[2,1-<Emphasis Type="Italic">b</Emphasis>][1,3]-thiazole-5,10-dione and naphtho[2',3':4,5]imidazo-[2,1-<Emphasis Type="Italic">b</Emphasis>][1,3]benzothiazole-7,12-dione

The reaction of 2,3-dibromo-1,4-naphthoquinone with 2-aminothiazole in MeONa/MeOH at 60oC for 3 h gave naphtho[2',3':4,5]imidazo[2,1-b][1,3]thiazole-5,10-dione in 64% yield. The reaction of 2,3-dibromo-1,4-naphthoquinone with 2-aminobenzothiazole under the above-mentioned conditions gave 2-(benzo[d]thiazol-2-ylamino)-3-bromonaphthalene-1,4-dione in 64% yield, which on treatment with Na/THF or NaN₃/acetone under reflux conditions gave naphtho[2',3':4,5]imidazo[2,1-b][1,3]- benzothiazole-7,12-dione in 69 and 56% yields, respectively.     

Polymerization of (E)‐1,3‐Pentadiene and (E)‐2‐methyl‐1,3‐pentadiene with neodymium catalysts: Examination of the factors that affect the stereoselectivity

(E)‐1,3‐Pentadiene (EP) and (E)‐2‐methyl‐1,3‐pentadiene (2MP) were polymerized to cis‐1,4 polymers with homogeneous and heterogeneous neodymium catalysts to examine the influence of the physical state of the catalyst on the polymerization stereoselectivity. Data on the polymerization of (E)‐1,3‐hexadiene (EH) are also reported. EP and EH gave cis‐1,4 isotactic polymers both with the homogeneous and with the heterogeneous system, whereas 2MP gave an isotactic cis‐1,4 polymer with the heterogeneous catalyst and a syndiotactic cis‐1,4 polymer, never reported earlier, with the homogeneous one. For comparison, the results obtained with the soluble CpTiCl₃‐based catalyst (Cp = cyclopentadienyl), which gives cis‐1,4 isotactic poly(2MP), are examined. A tentative interpretation is given for the mechanism of the formation of the stereoregular polymers obtained and a complete NMR characterization of the cis‐1,4‐syndiotactic poly(2MP) is reported. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3227–3232     

Poly(enamine-ketones) from hydrogen-terminated aromatic dipropynones and aromatic diamines

Poly(enamine-ketones) were prepared by the nucleophilic (Michael-type) addition of various aromatic diamines to 1,1′-(1,3- or 1,4-phenylene)bis(2-propyn-1-one)(1,3 or 1,4-PPO) in m-cresol at 5–23°C. The low molecular weight polymers (inherent viscosity of 0.25 dL/g) exhibited limited solubility in organic solvents. Glass transition temperatures were generally undetectable by differential scanning calorimetry while polymer decomposition temperatures (10% weight loss), as measured by thermogravimetric analysis, were observed from 355 to 419°C. Polymers prepared from 1,4-PPO were semi-crystalline as shown by wide-angle X-ray diffraction. The poly(enamine-ketone) structure was confirmed by matching infrared spectral characteristics of the polymers with those of well-characterized model enamine ketones.     

Heterocyclization of dimethyl malonate with SH acids and formaldehyde in the presence of catalysts

Three-component heterocyclization of dimethyl malonate with SH acids (H₂S, ethane-1,2-dithiol) and formaldehyde in the presence of 5 mol % of transition metal chlorides (FeCl₃, CoCl₂, NiCl₂) gave dimethyl 1,3-dithiane-5,5-dicarboxylate and dimethyl 1,4-dithiepane-6,6-dicarboxylate. The reactions in the presence of transition metal chlorides hydrates were accompanied by Krapcho decarboxylation with formation of methyl 1,3-dithiane-5-carboxylate and methyl 1,4-dithiepane-6-carboxylate.     

Copolymerization of 1,3‐butadiene and isoprene with cobalt dichloride/methylaluminoxane in the presence of triphenylphosphine

The homopolymerization and copolymerization of 1,3‐butadiene and isoprene were achieved at 0 °C with cobalt dichloride in combination with methylaluminoxane and triphenylphosphine (Ph₃P). For 1,3‐butadiene, highly cis‐specific and 1,2‐syndiospecific polymerization proceeded in the absence or presence of Ph₃P, respectively, although the activity with Ph₃P was much higher than that without Ph₃P. Only a trace of the polymer was, however, obtained in isoprene polymerization when Ph₃P had been added. For copolymerization, the polymer yield in the presence of Ph₃P was about three times higher than that in its absence. Copolymerization in the presence of Ph₃P was, therefore, investigated in more detail. Unimodal gel permeation chromatography elution curves with narrower polydispersity (weight‐average molecular weight/number‐average molecular weight ≈ 1.5) indicated that the propagation reaction proceeded by single‐site active species. Both the yield and molecular weight of the copolymer decreased with an increasing amount of isoprene in the feed, and this was followed by an increase in the isoprene content in the copolymer. The monomer reactivity ratios, r₁ (1,3‐butadiene) and r₂ (isoprene), were estimated to be 2.8 and 0.15, respectively. Although the 1,3‐butadiene content in the copolymer was strongly dependent on the comonomer composition in the feed, the ratio of 1,2‐inserted units to 1,4‐inserted units of 1,3‐butadiene was constant. Concerning the isoprene unit, the percentage of 1,2‐ and 3,4‐inserted units was increased at the expense of 1,4‐inserted units with an increasing isoprene content in the feed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3086–3092, 2002     

Novel anionic polyaddition of 2‐trifluoromethylacrylate by double Michael reaction with ethyl cyanoacetate

Novel fluorinated polymer synthesis with anionic polyaddition by double Michael addition reaction of 2‐trifluoromethylacrylate derivatives with ethyl cyanoacetate (ECA) was proposed. Diaddition product of ECA with phenyl 2‐trifluoromethylacrylate was yielded in high yield by the catalysis of sodium ethoxide in tetrahydrofuran at 60 °C. Sodium hydroxide catalyzed double Michael addition reaction also produced diaddition product in high yield. Novel anionic polyaddition of 1,4‐phenylene bis(2‐trifluoromethylacrylate) [CH₂?C(CF₃)COOC₆H₄OCOC(CF₃)?CH₂] (PBFA) with ECA afforded the polymer of 1.2 × 10⁴ as the highest molecular weight. The isolated polymer gave the polymer of 2.8 × 10⁴ as a molecular weight by the reaction of the isolated polymer with PBFA in the presence of sodium ethoxide; which proved that the polymer end groups were mainly ECA moieties. The reaction mechanism that the proton abstraction from ECA followed by the addition of 2trifluoromethylacrylate was proposed. The reaction of acetylacetone with PBFA was also examined to give the polymer of 7.6 × 10³ as the highest molecular weight catalyzed by sodium hydroxide at room temperature. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5698–5708, 2009     

Inorganic coordination polymers. X. Observations on the formation and nature of poly(di-μ-diphenylphosphinato-hydroxyaquochromium (III)),{Cr(H2O)(OH)-[OP(C6H5)2O]2}x

Under different conditions two products, one green and one brown, were obtained by the air oxidation of chromium(II) diphenylphosphinate. Air oxidation of an aqueous suspension of the phosphinate apparently yields a mixture in which the green form predominates. As initially isolated, the green form is a low molecular weight polymer corresponding to {Cr(H₂O)(OH)[OP(C₆H₅)₂O]₂}_n, with n approximately 11. It spontaneously polymerizes further in organic solvents to high molecular weight polymers of the same composition, with n in the range 150–200. This polymerization reaction in volves the elimination of water and is probably a reaction between endgroups resulting in a basically linear polymer. The brown product, corresponding to low molecular weight {Cr₂(H₂O)(OH)₂[OP(C₆H₅)₂O]₄}_p, also polymerizes spontaneously but at a faster rate and to a gel. The polymer so produced is less soluble than that produced from the low molecular weight green product and is probably crosslinked.     

Initiating system Me_3SiCl/AlCl_3 for cationic polymerization of 1,3-pentadiene in toluene

Cationic polymerization of 1,3-pentadiene (PD) initiated by trimethylsilyl chloride/aluminium chloride (TMSCl/AlCl3) was carried out in toluene at 30℃.The polymer yield was increased by the addition of TMSC1.However,introduction of TMSC1 gave rise to a drop of the polymer molecular weight.Kinetic results demonstrated that the polymerization initiated by TMSCl/AlCl3 was 2.8 times faster than that induced by AlCl3 alone.Various ethers and ketones were used to mediate the initiating system TMSCl/AlCl3.The polymer yield and molecular weight of the polymer were decreased in the presence of ether.Ketones and ethers had different effects on the polymerization,and the polymer yield and molecular weight were lower than those initiated by AlCl3 alone or TMSCl/AlCl3 Structural evidence revealed that the polymerization was indeed initiated by AlCl3 and HCl rcsulting from hydrolysis of TMSC1 by adventitious water.     

Synthesis of Poly(Arylene Alkenylene)s by Pd‐Catalyzed Three‐Component Coupling Polycondensation of Diiodoarenes,Non‐Conjugated Dienes,and Nucleophiles that Involves Chain Walking Isomerization

The Pd‐catalyzed three‐component coupling polycondensation of diiodoarenes, nonconjugated dienes, and carbonucleophiles afforded poly(arylene alkenylene)s with moderate molecular weight in good yield. The reaction involves Mizoroki‐Heck coupling, olefin migration via chain walking, and addition of the carbonucleophile to the resulting π‐allylpalladium species. The polymerization with a slight excess of nucleophile with respect to diiodoarene also proceeded to give the polymer without significant decrease in molecular weight in spite of the nonstoichiometric mixture of the monomers. The Pd‐catalyzed three‐component coupling polycondensation of diiodoarenes, nonconjugated dienes, and diimide also proceeded. The base used in the reaction is critical for yield and molecular weight of the product. The reaction using NaHCO₃ afforded the product with low solubility, which can be explained by the high molecular weight of the polymer and/or the strong interaction of the electron donating dimethoxyphenylene groups and electron accepting diimide groups in the polymer. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2535–2542     

Plasma polymerization. III. An ESCA investigation of polymers synthesized by excitation of inductively coupled RF plasmas in perfluorocyclohexa-1,3- and 1,4-dienes,and in perfluorocyclohexene

The plasma polymers prepared from perfluorocyclohexa-1,3-diene, perfluorocyclohexa-1,4-diene, and perfluorocyclohexene have been investigated by ESCA. The carbon-to-fluorine stoichiometries of the diene-derived polymers are similar and close to that of the starting material. The polymer prepared from perfluorocyclohexene is depleted in fluorine compared to the fluorine content of the “monomer.” The polymers prepared in nonglow regions are also studied and shown to be high in C F₂ derived species. The results are compared with those for perfluorobenzene and perfluorocyclohexane, and the polymerization rates are in the order C₆F₆ > C₆F₈ 1,3 ～ 1,4 > C₆F₁₀ ～ C₆F₁₂. The variations in composition of the plasma polymer as revealed by ESCA as a function of the polymerization conditions are discussed.     

(CH3)3SiCl/TiCl4 INITIATING SYSTEM FOR CATIONIC POLYMERIZATION OF 1,3-PENTADIENE

Cationic polymerizations of 1,3-pentadiene (PD) initiated by trimethylsilyl chloride (TMSCl) incombination with TiCl_4 were carried out in n-hexane at 30℃. The yield of polymer was greatly increased bythe addition of TMSCl, indicating that the TMSCl/TiCl_4 combination is an efficient initiating system for PDcationic polymerization. However, the introduction of TMSCl gave rise to a drop in the molecular weight ofthe polymer. Kinetic results demonstrated that the polymerization initiated by TMSCl/TiCl_4 is 4.5 times fasterthan that induced by TiCl_4 alone. Various ethers were used to mediate the TMSCl/TiCl_4 initiating system.Adding diphenyl ether could increase both the yield and molecular weight of the polymer. Structural evidenceillustrates that the polymerization is indeed initiated by TiCl_4 in combination with HCl resulting fromhydrolysis by adventitious water.