Unsaturated,biobased polyesters and their cross‐linking via radical copolymerization

Biobased, unsaturated polyesters derived from isosorbide, maleic anhydride, and succinic acid were synthesized and characterized. The presence of maleic anhydride units in the structure of the polyesters allowed converting them into cured coatings by radical copolymerization with crosslinking agents such as 2‐hydroxyethyl methacrylate, N‐vinyl‐2‐pyrrolidinone, acrylic acid or methacrylamide. The investigated polyesters were obtained via bulk polycondensation, catalyzed by titanium(IV) n‐butoxide. 2D NMR and MALDI‐Tof‐MS spectroscopy proved that this polymerization resulted in isomerization of maleic acid units into fumaric ones and in the formation of slightly branched structures by the reaction of isosorbide (end) groups with main chain unsaturated bonds. Moreover, some double bonds proved to have reacted with the condensation by‐product water. The resulting polyesters displayed the expected correlation between variables such as molecular weight and content of unsaturated bonds and their T_g values. Since the thermal properties of the obtained polyesters were appropriate for coating applications, the polymers were crosslinked with unsaturated monomers by radical copolymerization. The crosslinking process was studied using FTIR spectroscopy and by measurements of the soluble part of the cured coatings. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2885–2895, 2010     

Synthesis and photoreactions of polyesters containing triazene and cinnamylidene malonyl units

The synthesis and photoreactions of polyesters containing the photolabile triazene group (Ph NN NR₂) as well as photocrosslinkable units based on substituted cinnamylidene malonyl moieties are reported. The polyesters were obtained by reacting a triazene containing difunctional alcohol with different substituted cinnamylidene malonic acid dichlorides. Irradiation at λ > 395 nm enables selective photocrosslinking of the cinnamylidene malonyl ester units via [2+2]π‐cycloaddition without affecting the triazene units. The photocrosslinking reaction of the triazene containing polyesters as well as triazene‐free reference polyesters were investigated by UV and IR spectroscopy. After selective photocrosslinking the irradiated polymers became insoluble and no longer exhibited a T_g below decomposition temperature. The crosslinked triazene containing polyesters show strong absorption at λ = 308 nm and are therefore interesting candidates for applications using XeCl excimer laser ablation. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1903–1910, 2000     

Synthesis, characterization and degradation of well-defined crosslinkable aliphatic polyesters end-capped by biomesogenic units

Novel biodegradable-cum-crosslinkable polyesters end-capped by biomesogenic units, cinnamic acid (CA) and ferulic acid (FA), were synthesized via chain-growth polycondensation in solid-liquid phase. The chemical structure of synthesized polymers was characterized by Fourier transform infrared spectroscopy (FT-IR) and proton nuclear magnetic resonance spectroscopy (¹H NMR). The composition of polyesters, which was calculated by ¹H NMR, was in agreement with the feed ratios. The thermal properties and crystallinity of polyesters were measured by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), wide angle X-ray diffraction (WXRD) and polarizing-light microscopy (PLM). It was found that the polyesters possessed good crystallinity. Furthermore, the obtained polyesters could be crosslinked with methyl methacrylate (MMA), n-butyl acrylate (BA) and styrene (St) under thermal condition. The crosslinked products possessed degradability in phosphate buffer solution at 37 °C, which might be potentially applied as biomaterials.     

Ferrocene-containing polyesters and polyamides

A series of ferrocene-containing polyesters and polyamides were prepared by refluxing 1,1′-dichlorocarbonylferrocene with various diols and primary diamines in xylene–pyridine solvent. The polyamides were all solids, but some of the polyesters were liquids. Reported are the infrared spectra and solubility characteristics of all the polymers and, where possible, the molecular weight and molecular weight distributions. In general, these polyamides and polyesters were of relatively low molecular weight (below 4000), but the polyesters were readily chain extended and crosslinked by di- and triisocyanates. Elemental analyses are reported for all the polymers prepared.     

Epitaxial crystallization of polymers onto benzoic acid: Polyethylene and paraffins,aliphatic polyesters,and polyamides

Epitaxial crystallization of polyethylene, n-paraffins, aliphatic polyesters, and various polyamides has been achieved on benzoic acid crystal substrates, specifically on their (001) crystals faces, which are made up of the aromatic rings. The epitaxial relationship is very similar for all polymers investigated: it is characterized by a unique chain orientation (parallel to the b axis of the substrate) and a plane of contact which is either the b-c, plane of polyethylene, or crystallographically similar ones for polyesters, or the plane of the hydrogen-bonded sheet for polyamides. Since benzoic acid is structurally similar to its alkali-metal salts, it is inferred that the nucleating efficiency of the latter toward chemically different but structurally similar polymers may well rest on an epitaxial relationship. Finally, the highly oriented morphology made it possible, for some polyesters with a monoclinic cell, to determine the angle between the chain axis and the Z axis of the optical indicatrix, a quantity not measured so far in polymers.     

Influence of Residual Polyesterification Catalysts on the Curing of Polyesters

 Unsaturated polyesters are synthesized by means of polyesterification, often with catalysts like strong acids, metal oxides and metal-organic salts. Most often, the catalysts used cannot be separated from the bulk of the polyester. Also, some organic or inorganic additives – called fillers – which are used with the polyester in order to decrease cost, affect the curing of the polyester. In this work the effect of residual catalyst on the curing of unsaturated polyester is studied. Unsaturated polyesters were prepared using propylene glycol with a 10% molar excess over stoichiometry and a mixture of dicarboxylic acids, namely maleic acid (unsaturated) adipic acid (saturated) and phthalic anhydride (saturated) at a molar ratio 1:2:2. Lead dioxide, p-toluenesulfonic acid and zinc acetate were used as catalysts, at 0.1% w/w. After the polyesterification, the polymers were diluted with styrene at a proportion of 100:30 w/w. The resins were cured by using MEKP (methylethylketone peroxide) as initiator and CoNp (cobalt naphthenate) as accelerator. Catalysts affect the final color of the polyester. The kinetics of curing of the resins was studied by DSC analysis based on the exothermic peak due to the double bonds breaking to give crosslinked macromolecules. The heat released ΔH is decreased by the presence of catalyst, while activation energy, the frequency factor and the order of reaction are increased.     

Phenothiaphosphine-containing polyamides and polyesters

Phosphorus-containing polyamides and polyesters, which had tricyclic fused rings (phenothia-phosphine rings) in the main chain, were prepared and the properties of the resulting polymers were examined. These polymers were obtained at highly reduced viscosities in satisfactory yields by the polycondensation of 2,8-dichloroformyl-10-phenylphenothiaphosphine 5,5,10-trioxide with aromatic diamines or bisphenols. The polyamides and polyesters were soluble in polar aprotic solvents such as dimethylacetamide and N-methyl-2-pyrrolidone; the polyesters were also soluble in chloroform. The polymers exhibited good heat resistance. The phenothiaphosphine-containing polyamides and polyesters self-extinguished immediately when flame was removed and were highly flame-resistant. The polyester obtained from bisphenol A showed a limiting oxygen index value of 43.5.     

Degradable polymer blends. I. Screening of miscible polymers

Blends of biodegradable polymers having properties distinct from the individual polymer components, and that are suitable for use as carriers of pharmaceutically active agents, were prepared from two or more polyanhydrides, polyesters, and mixtures of polyanhydrides and low molecular weight polyesters. The blends have different properties than the original polymers, providing a mean for altering the characteristics of the polymeric matrix without altering the chemical structure of the component polymers. Aliphatic, aromatic, and copolymers of polyanhydrides were miscible in each other and formed less crystalline compositions with a single melting point which was lower than the melting point of the starting polymers. The polyesters: poly(lactide-glycolide), poly(caprolactone), and poly(hydroxybutyric acid) presented some miscibility in each other. However, the polyanhydrides were immiscible with the polyesters resulting in a complete phase separation both in solution or in melt mixing. Only low molecular weight polyesters (in the range of 2000) of lactide and glycolide, mandelic acid, propylenefumarate, and caprolactone presented some miscibility with polyanhydrides. Similarly, poly(orthoester) and hydroxybutyric acid polymers formed a uniform mixture with the anhydride polymers which had the two melting points of the original polymers. Drug release from polymer blends composed of poly(hydroxybutyric acid) or low molecular weight poly(lactic acid) with poly(sebacic anhydride) (PSA) showed a constant release of drug for periods from 2 weeks to several months as a function of the PSA content in the blend. Increasing the content of PSA, a fast degrading polymer, increases the release rate from the blend. © 1993 John Wiley & Sons, Inc.     

Preparation and structure/property relationships of polyesters containing conjugated diacetylene groups

A series of novel polyesters containing conjugated diacetylenes (DA‐polyesters) were prepared from various diacetylene diols with/without methyl side groups and isomers of aromatic acid chlorides via an interfacial condensation. A fully aliphatic DA‐polyester was also prepared for comparison. All synthesised DA‐polyesters are soluble in m‐cresol, and the intrinsic viscosities were measured. In addition, compact and coherent films and sheets can be obtained from some of the polymers via solution or melt casting. The structure, morphology, and properties were characterized using spectroscopic methods, including FTIR, Raman, and WAXD and thermal analysis including TGA, DSC techniques. DMA was carried out on the solution‐cast thin films and melt‐processed samples. Close correlation was found between the structure and properties in these DA‐polyesters. In particular, through analysis using isothermal DSC and Raman spectroscopy, the solid‐state reactivity of the diacetylene groups in these polyesters was found related to the interchain spacings, which are, in turn, controlled by the molecular structure of the polymers. Results have shown that the aliphatic DA‐polyester behaves very differently compared to the aromatic ones. Distinct differences were also observed among meta‐ and para‐disubstituted isomers of the DA‐polyesters. Furthermore, the introduction of methyl side groups has dramatically affected the thermal and thermal mechanical behavior by altering the interchain spacing of the polymers. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 965–974, 1999     

Polyesters from 12-hydroxymethyltetrahydroabietic acid and 12-hydroxymethyltetrahydroabietanol

The polyester of 12-hydroxymethyltetrahydroabietic acid was prepared by the selfcondensation of the hydroxy acid (I) and from its methyl ester (II). The condensation reaction was studied and different catalysts investigated. The inherent viscosity of the polymers were measured and their DTA diagrams taken. A polyurethane as well as different polyesters of the diol (III) with methylene di-p-phenyl diisocyanate, terephthalic, adipic, suberic, and sebacic acids were synthesized. Mixed polyesters and polyamide ester were also prepared. The properties of the above described polymers were investigated and their behavior on DTA reported.     

Cyclic and non cyclic aliphatic–aromatic polyesters derived from biomass: Study of structures by MALDI-ToF and NMR

New polyesters were prepared by polycondensation in solution of 1,4:3,6 dianhydrohexitols with various aliphatic–aromatic acid dichlorides which differ by their chain length (m = 6,8,10). They are obtained with yields in the range of between 89% and 95%. In order to obtain these polymers within optimum conditions, a systematic study was conducted on the effect of the parameters involved in the reaction, such as the alkyl chain length of acid dichlorides and the endo or exo positions of hydroxyl function of diols. The resulting polyesters were characterized by different analytical techniques such as NMR (¹H and ¹³C), FT-IR spectrometry, SEC measurements and MALDI-ToF mass spectrometry. Under optimized conditions a high molar fraction of cyclic polyesters was formed.The differential scanning calorimetry (DSC) measurements revealed an amorphous character with glass transition temperatures in the range of 27–45 °C. The polymers are obtained with inherent viscosities in the range of 0.11–0.25 dL/g with a polydispersity index between 1.75 and 1.99.     

Linear polyesters containing isocyanurate rings

Two series of linear polyesters containing isocyanurate rings have been prepared to determine the effect of structural variations on thermal and solubility properties. The polyesters were prepared by the polycondensation reaction of isocyanurate containing difunctional acid and ester monomers with linear diols. The substituent on the isocyanurate ring and the length of the acid side chain have been shown to have considerable effect on the glass transition temperature T_g. Different solubility properties were observed for the series of polyesters in which the pendant substituent was ? C₆H₅ and the acid side-chain was ? CH₂CO₂H. These polymers were insoluble in THF, and the polyester prepared from 1,6-hexanediol was also insoluble in chloroform. Thermal gravimetric analysis (TGA) indicated that structural differences had no significant effect on the thermal stability of these linear polyesters.     

Benzoxazine containing polyester thermosets with improved adhesion and flexibility

High molecular weight polyesters containing thermally curable benzoxazine units in the main chain have been synthesized. For this purpose, first the diol functional monomer is synthesized through the Mannich and subsequent ring closure reactions of bisphenol‐A, paraformaldehyde, and 5‐amino‐1‐pentanol. Polycondensation of the resulting benzoxazine and pyromellitic dianhydride or 4‐4′‐(hexafluoroisopropylidene) diphatalic anhydride with or without dibutyltin laurate yielded the corresponding polyesters with the molecular weights between 5800 and 7000 Da. The structures of the precursor diol monomer and the resulting polyesters are confirmed by Fourier transform infrared spectroscopy and proton nuclear magnetic resonance spectroscopy analysis. Curing behavior of both the monomer and polymers has also been studied by differential scanning calorimetry. Flexible films of the polyesters were obtained by solvent casting on tin plates and crosslinked by heating in the absence of any catalyst. The cured films exhibited high flexibility and adhesion on the tin plates as determined by ASTM and DIN tests. Thermal properties of the cured polymers were also investigated by thermogravimetric analysis (TGA). © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4279–4284, 2010     

Mobility of the ring structure and the characteristics of crosslinked polymers: The structural effect of the eleven-membered ring and its homologs upon the dynamic mechanical properties and glass transition temperature of crosslinked diallyl succinate polymers

Dynamic mechanical properties and glass transition temperatures were measured for crosslinked polymers derived from diallyl succinate monomers. The mobility of the diester having an eleven-membered ring and of homologous structures which are introduced in the crosslinked polymer system, is discussed on the basis of the parameter for cyclization polymerization of a monomer, dynamic mechanical properties, and glass transition temperature. Control of the mobility of the ring structure and its homologous structures involved in the crosslinked polymers was attempted by modification of the substituent at the 1- or 1,2-position of diallyl succinate, and the diallyl succinate monomers were derived from the succinic acid and its derivatives: succinic acid, methyl succinic, ethyl succinic, and chlorosuccinic acids; cis-1,2-dicarboxylic acids of cyclopropane, cyclobutane, cyclopentane, and cyclohexane; cis-1,3- and 1,4-dicarboxylic acids of cyclohexane, and phthalic acid. The results obtained are explained well on the basis of the mobility of the ring and homologous structures.     

Synthesis and properties of polyesters of isomeric poly(oxynaphthyleneoxy-2-bromoterephthaloyl)s

A series of aromatic polyesters were prepared from 2-bromoterephthalic acid and naphthalenediol isomers. Only the polymers obtained from 1,4-, and 1,5- and 2,6-naphthalenediols were thermotropic nematogens and those from bent naphthalenediols were not liquid crystalline. Only the polyesters derived from 1,4-, 1,5-, and 2,6-naphthalenediols were semicrystalline. The melting temperatures ranged from 319 to 374°C depending on the structure of naphthalenediol moiety. The glass transition temperature, T_g, ranged from 95 to 168°C. TGA studied revealed that the polyesters have fairly good thermal stability     

Design and Synthesis of Aromatic Polyesters Bearing Pendant Clickable Maleimide Groups

A bisphenol bearing pendant maleimide group, namely, N‐maleimidoethyl‐3, 3‐bis(4‐hydroxyphenyl)‐1‐isobenzopyrrolidone (PPH‐MA) was synthesized starting from phenolphthalein. Aromatic (co)polyesters bearing pendant maleimide groups were synthesized from PPH‐MA and aromatic diacid chlorides, namely, isophthaloyl chloride (IPC), terephthaloyl chloride (TPC), and 50:50 mol % mixture of IPC and TPC by low temperature solution polycondensation technique. Copolyesters were also synthesized by polycondensation of different molar proportions of PPH‐MA and bisphenol A with IPC. Inherent viscosities and number‐average molecular weights of aromatic (co)polyesters were in the range of 0.52–0.97 dL/g and 20,200–32,800 g/mol, respectively indicating formation of medium to reasonably high‐molecular‐weight polymers. ¹³C NMR spectral analysis of copolyesters revealed the formation of random copolymers. The 10% weight loss temperature of (co)polyesters was found in the range 470–484 °C, indicating their good thermal stability. A selected aromatic polyester bearing pendant maleimide groups was chemically modified via thiol‐maleimide Michael addition reaction with two representative thiol compounds, namely, 4‐chlorothiophenol and 1‐adamantanethiol to yield post‐modified polymers in a quantitative manner. Additionally, it was demonstrated that polyester containing pendant maleimide groups could be used to form insoluble crosslinked gel in the presence of a multifunctional thiol crosslinker. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 630–640     

Swelling Behavior of pH-Sensitive Copolymers Containing 2-Acrylamido-2-Methyl Propane Sulfonic Acid and Acrylic Acid Crosslinked with Vinyl Trimethoxy Silane Crosslinker

Copolymers of 2-acrylamido-2-methyl propane sulfonic acid and acrylic acid were crosslinked in the presence of different mol% of either vinyl trimethoxy silane (VTMS) as the crosslinking agent under acidic conditions or N,N-methylenebisacrylamide (MBA) as crosslinker using solution radical polymerization. The resultant xerogels were characterized by extracting the soluble fractions and measuring the equilibrium water content. Soluble fractions of the crosslinked networks were reduced by varying the MBA and VTMS concentrations. The surface morphology of the crosslinked polymers was observed by scanning electron microscope. The influence of pH on the swelling behavior of gels was investigated. The swelling behaviors of the resulting gels show pH sensitivity.     

Synthesis of aliphatic polyesters by polycondensation using inorganic acid as catalyst

An effective route for the synthesis of aliphatic polyesters made from adipic or sebacic acid and alkanediols, using inorganic acid as a catalyst is reported. The monomer composition, reaction time, catalyst type, and reaction conditions were optimized to yield polyesters with weight average molecular weights of 23,000 for adipic acid and 85,000 for sebacic acid‐based polyesters. The polymers melt at temperatures of 52–65°C and possess melt viscosity in the range of 5600–19,400cP. This route represents an alternative method for producing aliphatic polyesters for possible use in the preparation of degradable disposable medical supplies. Copyright © 2009 John Wiley & Sons, Ltd.     

Degradable polyesters through chain linking for packaging and biomedical applications

The major route to convert lactic acid to high-molecular-weight polymers is ring-opening polymerization of lactide. We have investigated alternative synthesis routes based on oligomerization and chain linking to produce high-molecular-weight thermoplastic degradable polymers cost-effectively. Chain linking also offers new possibilities to prepare degradable polyesters for biomedical applications by extending the range of polymer properties achievable. In this paper, we briefly review different chain linking techniques used in our laboratory. Typically, lactic acid prepolymers with molecular weights of around 3,000-15,000 g x mol(-1) have been prepared by direct polycondensation. Hydroxyl terminated oligomers have been chain linked by using diisocyanate coupling agents, preferably 1,4-butane diisocyanate, forming poly(ester-urethanes). Poly(ester-amides) have been prepared by using 2,2'-bis(2-oxazoline) as coupling agent for carboxylic acid telechelic oligomers. Chain linking by end functionalization has been used in the preparation of poly(ester-anhydrides). In addition, a variety of crosslinked degradable polymers and copolymers have been synthesized through different crosslinking routes, by using methacrylic, itaconic or maleic double bonds or triethoxysilane moieties. A biodegradation test and ecotoxicological evaluation of the degradation products were carried out in addition to hydrolysis tests. Lactic acid based chain linked polymers were biodegradable and the degradation products were harmless. In hydrolysis tests, enzymatic degradation was pronounced in the chain linked poly(epsilon-caprolactone).     

Methylene-bridged aromatic polyesters. Synthesis,characterization, and radiation-induced crosslinking

Aromatic polyesters connected by methylene groups were synthesized. Two pairs of aromatic diacid chlorides, 3,3′-methylenedibenzoyl chloride and 4,4′-methylenedibenzoyl chloride were each polymerized via interfacial polycondensation with 2,2-bis(4-hydroxyphenyl)propane (bisphenol A), 3,3′-methylenediphenol, and 4,4′-methylenediphenol. For comparison, 3,3′-carbonyldibenzoyl chloride and 4,4′-carbonyldibenzoyl chloride were similarly polymerized with bisphenol A. Substitution of meta,meta' oriented phenylene groups for para,para' oriented phenylene groups had a significant and cumulative effect in reducing the glass transition temperatures of the polymers, thereby enhancing their processability. In air the methylene groups of the polyesters undergo oxidation and crosslinking at elevated temperatures. Electron beam irradiation of thin films of the methylene-linked polyesters at room temperature resulted in some chain extension and crosslinking, as evidenced by increased solution viscosity and gel formation. Irradiation at a temperature near or above the glass transition temperatures of the polymers greatly enhanced the tendency for the polymers to crosslink.