Alternating Copolymers from Alkyleneimines. I. Copolymers from Ethyleneimine and Dicarboxylic Anhydrides

Ethyleneimine and dicarboxylic anhydrides were copolymerized to alternating copolymers which possess an ester-amide in the repeating unit. The structure of copolymer was Identified by IR, NMR, and elemental analysis. On taking the structure of copolymer, the nucleophllic reactivity of ethyleneimine, and the electrophilic nature of dicarboxylic anhydride Into consideration, a reaction mechanism was elucidated. It Involves ring opening and a stepwise addition reaction in alternating manner, in that one monomer undergoes ring opening and chain propagation exclusively through the interaction with another monomer that is already present at the polymer chain end. The copolymers obtained from halogen containing dicarboxylic anhydrides are useful as fire-retarding additives for plastics and also as thermosetting resin precursor when anhydrides are partially replaced by maleic anhydride.     

Syntheses and reactions of functional polymers. XLII. Preparation and use of polymers having N-hydroxy-succinimide unit in the chain

Styrene-maleic anhydride alternating copolymer was converted to N-hydroxymaleimide-styrene copolymer by reaction with hydroxylamine in pyridine at room temperature. The conversion was more than 90%. From this copolymer, N-acetoxy- or N-benzoyloxymaleimide-styrene copolymers were derived by action of acetic anhydride or benzoyl chloride in dimethylformamide at room temperature. Acylation of several primary amines was carried out effectively by use of these N-acyloxyimide-styrene copolymers. The reaction of the acetylated copolymer with diethylamine at room temperature afforded N-hydroxyimide copolymer.     

Functional films of maleic anhydride copolymers under physiological conditions

Reactivity and swelling of nanometer films of alternating maleic anhydride copolymers were investigated in dependence on the kind of comonomer and molar mass of copolymer in aqueous solution at pH 7.4 and pH 3.0 in order to reveal their characteristics under physiological conditions. Fully hydrolyzed (maleic acid) chains of the copolymers with styrene, propene, and ethylene comonomers covalently bound to SiO2 substrates showed a "mushroom" swelling behavior at pH 7.4 with a layer thickness scaling of N3/5. Decreasing the environmental pH was found to induce a comonomer-dependent shrinking or collapse of the immobilized polymers due to the change in ionization. From the swelling kinetics of non-hydrolyzed chains, the time constants and characteristics of swelling and anhydride hydrolysis were determined and found to depend on the type of comonomer. The short- and long-term swelling kinetics [l approximately t and approximately ln(t)1/2] were found to be in agreement with theoretical models of polymer swelling, while at intermediate time scales enhanced swelling was observed due to hydrolysis reaction of maleic anhydride groups. The findings elucidate the variety of properties of maleic anhydride copolymer films under physiological conditions, which can advantageously be applied for biofunctionalization of different templates.     

Kinetics of amine-cyclic anhydride reactions in moderately polar solutions

The validity of extrapolating the reactivity of low molar mass compounds in solution to the polymer-analogous chemistry between polymer-bound functionality is investigated for the reaction of primary amines with cyclic anhydrides in the moderately polar solvents, anisole and tetraethyleneglycol dimethylether. The kinetics of amic-acid formation and imidization of polymeric and small molecule mixtures measured by Fourier-Transform Infrared Spectroscopy at near-ambient and elevated temperatures are compared. A Significant decrease in both reaction rates is observed upon changing the primary amine from aliphatic to benzylic, benzylic to 1,2-diphenylethylamine, and 1,2-diphenylethylamine to polystyrene-bound 1,2-diphenylethylamine. Reasons for the influence of polymer-bound chemical functionality on the reaction rates for these amines are discussed. The imidization step is found to be rate limiting in the reaction of phthalic anhydride with benzylamine at the functional group concentrations reported (0.14M or less). © 1995 John Wiley & Sons, Inc.     

The influence of detergentless microemulsion on the kinetics of hydrolysis of di(p-nitrophenyl) methylphosphonate catalyzed by amines

The influence of the detergentless water/oil microemulsion formed in then-hexane-water-2-propanol system on the kinetics of the hydrolysis of di(p-nitrophenyl) methylphosphonate under the conditions of general base catalysis by primary, secondary, and tertiary aliphatic amines was investigate. The leveling of the catalytic rate constants and basicities of the amines was found for this reaction in a microemulsion. The catalytic rate constants for the amines containing hydrophilic groups increase in microemulsions as compared to those in an aqueous medium, while the catalytic constants for the amines containing hydrophobic groups decrease. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1339–1342, July, 1998.     

First report on the kinetics of the uncatalyzed esterification of cellulose under homogeneous reaction conditions: a rationale for the effect of carboxylic acid anhydride chain-length on the degree of biopolymer substitution

The kinetics of the homogeneous acylation of microcrystalline cellulose, MCC, with carboxylic acid anhydrides with different acyl chain-length (Nc; ethanoic to hexanoic) in LiCl/N,N-dimethylacetamide have been studied by conductivity measurements from 65 to 85 °C. We have employed cyclohexylmethanol, CHM, and trans-1,2-cyclohexanediol, CHD, as model compounds for the hydroxyl groups of the anhydroglucose unit of cellulose. The ratios of rate constants of acylation of primary (CHM; Prim-OH) and secondary (CHD; Sec-OH) groups have been employed, after correction, in order to split the overall rate constants of the reaction of MCC into contributions from the discrete OH groups. For the model compounds, we have found that k_(Prim-OH)/k_(Sec-OH) > 1, akin to reactions of cellulose under heterogeneous conditions; this ratio increases as a function of increasing Nc. The overall, and partial rate constants of the acylation of MCC decrease from ethanoic- to butanoic-anhydride and then increase for pentanoic- and hexanoic anhydride, due to subtle changes in- and compensations of the enthalpy and entropy of activation.     

Investigation of polyimides containing naphthalene units. II. Model compounds synthesis

A series of model compounds from 4-benzoyl-1,8-naphthalene anhydride and aromatic amines and diamines has been synthesized. The influence of the reaction conditions on the structure of the compounds obtained has been investigated to explain the high-temperature polycondensation reaction mechanism. It was found that at high-temperature polycondensation of 1,8-naphthalene-type anhydrides with aromatic amines, isoimides with cis and and trans structures are formed instead of amic acids. The only trans isoimides may isomerize to imide structure. © 1995 John Wiley & Sons, Inc.     

Study on ketalization reaction of poly(vinyl alcohol) by ketones. IX. Kinetic study on acetalization and ketalization reaction of 1,3-butanediol as a model compound for poly(vinyl alcohol)

A kinetic study was carried out on the acetalization reaction of 1,3-butanediol, as a model compound for poly(vinyl alcohol) (PVA), in water, under acidic conditions. Since these equilibrium constants of ketalization reaction of 1,3-butanediol and ethylene glycol are so small, the kinetic parameters were estimated from the hydrolysis reactions of the corresponding ketals. It was made clear that these reactions proceed in the reversible bimolecular reaction, and the heat of reaction and activation energy are nearly equal to that of PVA. The rate constants of hydrolysis reaction (k′s) of model compounds were calculated on the basis of value of acetone ketal, Hammett-Taft's equation log k′s/k′so – 0.54(n – 6) = ρ^*σ^* was established, and the value of ρ^* was obtained (3.60), which coincided with the value of PVA. Therefore, it was made clear that the hydrolysis reactions of acetals and ketals are electrophilic reaction (SE II reaction) and the step of rate determination is the formation of hemiacetal and hemiketal. The rate constants of hydrolysis reaction of 1,3-butanediol acetals and ketals were approximately 10–20 larger, and those of ethylene glycol were approximetly 50–80 larger except for ketals, and those of ethanol were roughly 2000–10,000 larger compared with that of high-molecular weight compound (PVA). It can be well explained that these differences in the rate constant depend on their entropy and the mobility of molecules. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1719–1931, 1997     

Synthesis and characterization of styrenic polymers with pendant pyrazole groups. II

The synthesis of styrenic monomers that have pyrazolic or bipyrazolic pendant groups is described. Their homopolymerization and their copolymerization with maleic anhydride (MA) and N-(3-acetoxy propyl) maleimide is reported. The monomers were prepared from the Williamson reaction between 2-pyridine carbinol, hydroxy monopyrazole, hydroxy bipyrazole, and chloromethyl styrene. The homopolymerizations of such styrenic monomers were tried under different conditions, which led to low molecular weight polymers with a high polydispersity. However, alternating copolymers were obtained using maleic anhydride or N-(3-acetoxy propyl) maleimide as comonomers, as shown by ¹H-NMR, elemental analysis, and reactivity ratios r₁ and r₂. Furthermore, the hydrolysis of the acetate function of different copolymers was performed quantitatively. Unlike the acetoxy copolymers, such products do not have any glass transition temperature. Thermogravimetric investigations have shown that these copolymers exhibit good thermostability. © 1994 John Wiley & Sons, Inc.     

Synthesis of periodic copolymers via ring‐opening copolymerizations of cyclic anhydrides with tetrahydrofuran using nonafluorobutanesulfonimide as an organic catalyst and subsequent transformation to aliphatic polyesters

To synthesize polyesters and periodic copolymers catalyzed by nonafluorobutanesulfonimide (Nf₂NH), we performed ring‐opening copolymerizations of cyclic anhydrides with tetrahydrofuran (THF) at 50–120 °C. At high temperature (100–120 °C), the cyclic anhydrides, such as succinic anhydride (SAn), glutaric anhydride (GAn), phthalic anhydride (PAn), maleic anhydride (MAn), and citraconic anhydride (CAn), copolymerized with THF via ring‐opening to produce polyesters (M_n = 0.8–6.8 × 10³, M_n/M_w = 2.03–3.51). Ether units were temporarily formed during this copolymerization and subsequently, the ether units were transformed into esters by chain transfer reaction, thus giving the corresponding polyester. On the other hand, at low temperature (25–50 °C), ring‐opening copolymerizations of the cyclic anhydrides with THF produced poly(ester‐ether) (M_n = 3.4–12.1 × 10³, M_w/M_n = 1.44–2.10). NMR and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectra revealed that when toluene (4 M) was used as a solvent, GAn reacted with THF (unit ratio: 1:2) to produce periodic copolymers (M_n = 5.9 × 10³, M_w/M_n = 2.10). We have also performed model reactions to delineate the mechanism by which periodic copolymers containing both ester and ether units were transformed into polyesters by raising the reaction temperature to 120 °C. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Copolymerization of 2-Hydroxy.(2,3-epoxypropoxy)benzophenone with Phthalanhydride Catalyzed by Tertiary Amine

The copolymerization of an epoxide, 2-hydroxy-4-(2,3-epoxy-propoxy)benzophenone, with cyclic anhydride catalyzed by tertiary amine in different solvents was studied. The copolymerization curves are sigmoidal in character with an induction period. In the region following the induction period, the loss in epoxide or anhydride may be correlated with the kinetic equation of the first order reaction provided the monomers are present in equimolar ratio or anhydride is in excess with respect to epoxide. The rate constant found experimentally after the induction period depends on the first power of the concentrations of amine, epoxide, and anhydride. The activation energy of copolymerization in o-xylene is 58.2 kJ/mole (13.9 kcal/mole) and log A = 3.6. The rate of copolymerization depends on polarity of the solvent and increases with dielectric constant. A reaction scheme has been proposed for the copolymerization of epoxides with cyclic anhydrides catalyzed by tertiary amines which involves the formation of a catalytic center of ionic character by isomerization of epoxide into a derivative of allyl alcohol and its subsequent interaction with tertiary amine and anhydride in equilibrium reactions, In this way, an active center of the carboxylic anion type is formed which reacts with epoxide to give alkoxide anion. This alkoxide anion reacts with anhydride to yield carboxylic anion. By interchange of these reactions, an alternating copolymer-polyester arises. The termination involves the decay of the active center into tertiary amine and carboxylic or hydroxylic endgroups. The kinetic solution of this scheme is in agreement with the experimental results of kinetic measurements and the rate of copolymerization is governed by the equation: -d[epoxide] /dt = k_p [amine] ₀ [epoxide]₀ [anhydride]₀ [epoxide].     

Reactions in the presence of organic phosphites,I: High temperature amidation in the absence of solvents

When reacted for periods of 5–10 min at temperatures of about 280–300°C in the presence of certain organic phosphites polymers that contain available carboxy and aliphatic amine groups undergo amidation. This reaction can increase the molecular weight of many aliphatic polyamides by their self-reaction in an extruder. Block or graft copolymers can be formed by reacting polymers that contain aliphatic amines with others that contain carboxyl. Studies of model compounds in the companion article (II) indicate that polymerization proceeds through an diaryloxy or dialkoxy amino phosphine intermediate to produce amide bonds and disubstituted phosphite reaction by-products. In the absence of primary amines in the reaction mixture an ester is slowly formed from the carboxyl end group of the polymer and the oxysubstituent of the phosphite. In no case was a phosphorus-containing mixed anhydride detected. The mechanistic identity of the low temperature reactions in article II and the high temperature reactions in this article has not been proved conclusively, however.     

4-PEG接枝苯乙烯-马来酸酐交替共聚物的合成及功能化

采用普通自由基聚合和可逆加成一断裂链转移（RAFT）自由基聚合方法合成了对位PEG取代苯乙烯（PEG-g-St）和马来酸酐的交替共聚物（P（（PEG—g—St）-alt-MA））,”CNMR分析表明PEG-g-St和马来酸酐单元采取交替的序列结构．利用反应性基团-马来酸酐单元的水解以及胺解可以制备功能性的PEG聚合物．以月桂胺为模型小分子研究了该聚合物的胺解,得到4-PEG-苯乙烯与羧酸基团以及疏水烷烃的交替序列聚合物,该双亲聚合物在水溶液中形成组装体．     

Functionalization of a poly(vinyl alcohol) in the solid state with a swelling agent by methacrylic anhydride

Poly(vinyl alcohol‐co‐vinyl acetate) was functionalized by methacrylic anhydride to introduce functional groups by a new process that consisted of modifying a polymer directly from a powder form in the solid state. To favor the diffusion of the reagents, a swelling agent composed by a mixture of ethylene carbonate and propylene carbonate was used. N‐methylimidazole was used as a basic catalyst of the esterification reaction, adjusting the reaction times. This work presents the process and the effects of the formulation on anhydride conversion. The side reactions were also determined; they all involved N‐methylimidazole. Decarboxylation reactions of the carbonates were characterized, that is, going from ethylene carbonate to ethylene glycol, which is able to react with two anhydride molecules by esterification reactions to, respectively, form 2‐hydroxyethyl 2‐methylpropenoate and ethyl 1,2‐bis(2‐methyl propenoate). The same side reactions are possible with propylene carbonate but are less reactive than the starting ethylene carbonate. Model anhydrides such as hexanoic and heptanoic anhydrides, less reactive than methacrylic anhydride, were used to characterize a new anhydride decarboxylation reaction. The homogeneity of the grafting is also discussed, especially its dependence on the polymer properties, the diffusion modes of the reagents (carbonate mixture and the anhydride), and the competition between the diffusional and chemical kinetics of methacrylic anhydride. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1618–1629, 2004     

Polymers from renewable resources. II. A study in the radio chemical grafting of poly(styrene‐alt‐maleic anhydride) onto cellulose extracted from pine needles

A binary mixture of styrene and maleic anhydride has been graft copolymerized onto cellulose extracted from Pinus roxburghii needles. The reaction was initiated with gamma rays in air by the simultaneous irradiation method. Graft copolymerization was studied under optimum conditions of total dose of radiation, amount of water, and molar concentration previously worked out for grafting styrene onto cellulose. Percentage of total conversion (Pg), grafting efficiency (%), percentage of grafting (Pg), and rates of polymerization (R_p), grafting (R_g), and homopolymerization (R_h) have been determined as a function of maleic anhydride concentration. The high degree of kinetic regularity and the linear dependence of the rate of polymerization on maleic anhydride concentration, along with the low and nearly constant rate of homopolymerization suggest that the monomers first form a complexomer which then polymerizes to form grafted chains with an alternating sequence. Grafting parameters and reaction rates achieve maximum values when the molar ratio of styrene to maleic anhydride is 1 : 1. Further evidence for the alternating monomer sequence is obtained from quantitatively evaluating the composition of the grafted chains from the FT‐IR spectra, in which the ratio of anhydride absorbance to aromatic (CC) absorbance for the stretching bands assigned to the grafted monomers remained constant and independent of the feed ratio of maleic anhydride to styrene. Thermal behaviour of the graft copolymers revealed that all graft copolymers exhibit single stage decomposition with characteristic transitions at 161–165°C and 290–300°C. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1763–1769, 1999     

Exchange and free radical grafting reactions in reactive extrusion

The potential of two types of reactions for reactive extrusion was evaluated in our laboratory: exchange reactions of copolyesters and free radical grafting of monomers onto polyolefins. Specifically, the alcoholysis of ethylene and vinyl acetate copolymers, the transesterification of ethylene and alkyl acrylate copolymers (EAA) and the aminolysis of alkyl acrylate copolymers were investigated as the exchange reactions while the grafting of maleic anhydride (MA) onto polypropylene (PP) as the free radical reactions. The exchange reactions are very slow without catalysts. Tin derivatives, such as dibutyl tin dilaurate (DBTDL) and dibutyl tin oxide (DBTO), are good catalysts for the alcoholysis and the transesterification, but not for the aminolysis. For the latter, tautomeric compounds, such as 2-pyridone and 2-mercaptopyridone, are efficient. Comparative kinetic studies showed that, for all the three exchange reactions, the reacting medium (solution or the homogeneous melt) does not affect their reaction mechanisms nor their intrinsic rate constants. Additionally, mechanical mixing does not contribute to the overall reactions. As for the free radical grafting of MA, the presence of electron-donating monomers and styrene (ST) in particular was shown to be very effective in improving the grafting yield while minimising the degradation of PP. This was proven to be due to the formation of a charge transfer complex between MA and such a monomer.     

Mechanism of amine catalyzed isomerization of itaconic anhydride to citraconic anhydride: Citraconamic acid formation

The amine catalyzed isomerization of itaconic to citraconic anhydride has been investigated. Studies show that the rate of isomerization is dependent on the base strength and solvent media. Triethylamine causes complete isomerization within 5 min at room temperature in acetone or chloroform solvent, whereas aromatic tertiary amines such as pyridine and N,N-dimethylaniline require time perods as long as 23h at room temperature for almost complete isomerization. In the presence of aniline no isomerization occures even under acetone reflux conditions over a 24 h period. For the preparation of citraconamic acids from itaconic anhydrides and aliphatic diamines nuclear magnetic resonance and infrared spectroscopic evidence is presented to support the reaction path of initial isomerization of itaconic anhydride to citraconic anhydride followed by amine attack on the anhydride to form the corresponding cis-citraconamic acids. The mechanism of isomerization of itaconic to citraconic acids is proposed.     

光致噻吨酮与胺类、酚类、醇类的电子转移和氢转移反应

利用激光闪光光解方法研究了一系列胺类、酚类、醇类在脱氧乙腈中猝灭噻吨酮(TX)三重态的反应,得到了相应的瞬态吸收光谱和猝灭速率常数(kq).通过对光谱演变特性的分析,推断出三重态噻吨酮与不含有活泼氢的胺发生了电子转移反应,与含有活泼氢的胺发生了电子-质子转移反应.三重态噻吨酮与酚类、醇类反应中观察到噻吨酮加氢自由基的生成,据此推断出三重态噻吨酮与酚类、醇类发生了氢转移反应.胺类的猝灭速率常数随着反应自由能变(ΔG)的增大而减小,说明电子转移影响了噻吨酮三重态的猝灭.酚类的猝灭速率常数先随ΔG增大而减小,后随酚阳离子的酸性增强逐渐增大,可能是猝灭过程中电子转移影响减弱的同时氢转移影响逐渐增强.醇类的猝灭速率常数随着醇的α-C—H键能的增大而减小,说明α-C—H键能是影响噻吨酮三重态猝灭的关键因素.比较以前研究的胺类、酚类、醇类与三重态呫吨酮(XT)、芴酮(FL)反应的结果可知,由于分子结构差异性的影响,相关的猝灭速率常数按照呫吨酮、噻吨酮、芴酮的顺序逐渐减小.     

Untersuchung der Bildung von Polyesteramiden aus Dicarbonsäure-anhydriden und Oxazolidinonen-2

The well-known reaction of dicarboxylic acid anhydrides with epoxides, catalyzed by bases and yielding linear polyesters, has been extended by a variation of the reactants. The reactions of succinic and phthalic anhydrides with N-substituted oxazolidinones-2, which by their tendency to split off CO₂ may be regarded as ethyleneimine derivatives, give in the presence of a few mole percent of LiCl at 200–220°C. within 5–10 hr. polyester amides of molecular weights up to 3.500 in nearly quantitative yield. The polymer yield corresponds to the CO₂ evolution indicating an equal consumption of oxazolidinone and anhydride in the reaction. The experimental activation energies of 22.8 and 20.2 kcal./mole for the reaction of 3-phenyl oxazolidinone-2 with succinic and phthalic anhydrides, respectively, fairly agree with earlier values reported for the corresponding reactions of the cyclic carbonates.     

Quantification and Prediction of Imine Formation Kinetics in Aqueous Solution by Microfluidic NMR Spectroscopy

Quantitatively predicting the reactivity of dynamic covalent reaction is essential to understand and rationally design complex structures and reaction networks. Herein, the reactivity of aldehydes and amines in various rapid imine formation in aqueous solution by microfluidic NMR spectroscopy was quantified. Investigation of reaction kinetics allowed to quantify the forward rate constants k₊ by an empirical equation, of which three independent parameters were introduced as reactivity parameters of aldehydes (S_E, E) and amines (N). Furthermore, these reactivity parameters were successfully used to predict the unknown forward rate constants of imine formation. Finally, two competitive reaction networks were rationally designed based on the proposed reactivity parameters. Our work has demonstrated the capability of microfluidic NMR spectroscopy in quantifying the kinetics of label-free chemical reactions, especially rapid reactions that are complete in minutes.