Graft Copolymerization of Methyl Methacrylate on Potato Starch Using Potassium Trioxalatomanganate,K3[Mn(C2O4)3], as Initiator

Graft copolymerization of methyl methacrylate on potato starch was carried out in methanol-water medium at 35°C in the dark using potassium trioxalatomanganate, K₃[Mn(C₂O₄)₃], as initiator. The effect of different methanol-water ratios (v/v), the temperature of polymerization, the initiator concentration, the monomer concentration, the starch content, and the time of polymerization were studied. Percent total conversion, % grafting, and grafting efficiency (%) under different conditions were evaluated and compared. High grafting efficiency (～80%), high % total conversion (～85%), and high % grafting (-95%) were readily obtained. The reaction mechanism for graft copolymer formation is discussed.     

RADICAL GRAFTING REACTIONS ONTO STARCH AND OTHER WATER-SOLUBLE COPOLYMERS IN ISOLATED GEL DROPLETS

A novel radical grafting copolymerization process has been designed for water-soluble polymers which avoids the problems of conducting grafting reactions in highly viscous polymerization media. A variety of water-soluble graft copolymers having starch or dextran as the backbone chain with grafted side chains of polyacrylamide (—AM—), poly (acrylic acid ) (—AA—), poly (acrylamide-co-acrylic acid) (—AM—NH_4AA—) or poly ( acrylamide-co-2-acryiamido-2-methyl-l-propanesulphinic acid) (—AM—AMPS—) have been synthesized in gel droplets using aceric sulphate redox initiator, and their properties compared. The reaction conditions were optimized taking into account reaction kinetic data and the observed properties of the products produced under different reaction conditions. The effects of the ratios of [backbone]/[graft monomer], [ AM]/[ AA]/[AMPS] , [Ce~(4+)]/[ S_2O_8=] and pH value on the reaction rate , conversion, grafting degree, grafted chain length and the product molecular weight have been investigated.     

Grafting of 1-Cyanoethanoyl-4-acryloylthiosemicabazide onto Chitosan and Biocidal Activity of the Graft Copolymers

Chitosan was grafted with a novel monomer 1-Cyanoethanoyl-4-acryloylthiosemicabazide (CEATS). The graft copolymerization was conducted using potassium persulfate (K₂S₂O₈) and sodium bisulfite (NaHSO₃) as redox initiators. The grafted samples were characterized by FTIR spectroscopy, scanning electron microscopy, X-ray diffraction, and thermogravimetric analysis. The data may indicate that grafting has occurred at the surface of chitosan. The grafted samples showed high water swelling. The antifungal behavior of chitosan and its graft copolymers was investigated in vitro and it has been found that grafting with CEATS noticeably enhances the antifungal activity.     

Diffusion-controlled reaction. VI. Radiation graft polymerization of 4-vinylpyridine to polyethylene

The radiation-initiated graft polymerization of 4-vinylpyridine to high-density polyethylene was studied over a wide range of reaction conditions of radiation intensity I, monomer concentration M₁, and polymer film thickness L. The conditions included both diffusion-free and diffusion-controlled graft polymerizations. The results corroborate our previous theoretical predictions on the effect of I, M₁, and L on the experimental grafting rate. The grafting rate is inverse first order in L for diffusion-controlled reaction and independent of L for diffusion-free reaction. The dependence of grafting rate on radiation intensity decreases from 1/2 to 1/4 order for diffusion-controlled reaction. Diffusion control results in a decrease in the dependence of rate on monomer concentration. The observed decrease is somewhat greater than theoretically predicted.     

Grafting onto polypropylene. I. Effect of solvents in gamma radiation-induced graft copolymerization of poly(acrylonitrile)

Graft copolymerization of acrylonitrile (AN) onto isotactic polypropylene (PP) fiber has been studied by using gamma rays from a 2100 Ci ⁶⁰Co source as initiator by preirradiation technique. The preirradiated PP was treated with AN and the mixture was graft copolymerized by heating to 100°C for different time periods. The percentage of grafting is determined as a function of total dose, reaction time, and monomer concentration. The effect of different solvents such as H₂O, CH₃OH, and dioxane upon percentage of grafting has been studied. The maximum effect was observed in water and the minimum in CH₃OH. PP—g—PAN was characterized by IR spectroscopic and thermogravimetric methods. A plausible mechanism of gamma radiation induced grafting of AN onto PP in the absence and in the presence of solvents has been proposed. An attempt has been made to compare the relative abilities of different solvents to influence grafting.     

Graft copolymerization of 4-vinylpyridine onto cellulose using Co (III) acetylacetonate comlex in aqueous medium

The graft copolymerization of 4-vinylpyridine (4-VP) onto cellulose has been carried out in heterogeneous conditions with cobaltacetylacetonate complex (Co (acac)₃) under nitrogen atmosphere at 35±0.1°C in aqueous media. The grafting parameters such as graft yield, grafting efficiency, total conversion, frequency of grafting and rate of grafting have been evaluated as a function of concentration of 4-vinylpyridine, cobaltacetylacetonate and reaction temperature of graft copolymerization. Variation in concentration of monomer and initiator leads to a consistent increase in grafting parameters and then show a decreasing trend. The efficient grafting of monomer in presence of cobaltacetylacetonate complex is due to the coordination of the -electrons of the 4-vinylpyridine with the metal chelate which facilitate the homolytic decomposition of metal-oxygen bond to form radicals at relatively low temperature. The rate of graft copolymerization is directly proportional to the concentration of monomer and the square root of the concentration of the cobaltacetylacetonate complex. The activation energy (Ea) for graft copolymeriztion has been calculated using a Arrhenius plot and is 31.0kJ mol^–1 within the temperature range of 20–40°C. The grafting of 4-vinylpyridine has also been studied in presence of various additives and their effects have been suitably explained. On the basis of the experimental observations, reaction steps are proposed and rate expression has been derived.     

Potassium peroxydiphosphate — Fructose redox system induced grafting of methyl methacrylate onto silk

In an attempt to modify fibrous protein, methyl methacrylate (MMA) has been graft copolymerized onto Mulberry silk in an aqueous medium by using peroxydiphosphate — fructose redox system. Graft copolymerizations were carried out at 45, 50, and 55 °C for a period from 1 to 6 hr. Percentage grafting was found to be dependent upon reaction temperature, time, concentration of monomer, acid, peroxydiphosphate and fructose. The rate of grafting (R _p ) and the induction period (I _p of MMA was determined as a function of total initial monomer concentration.     

Grafting onto Cellulose. VI. Graft Copolymerization of Vinyl Acetate by Use of Metal Chelates as Initiators

Graft copolymerization of vinyl acetate (VAc) onto cellulose has been studied in an aqueous medium in the presence of Fe(acac)₃, Al(acac)₃, and Zn(acac)₂ as initiators. Percentage of grafting has been determined as a function of concentration of initiators and monomer, reaction time, and temperature. The reactivities of different metal chelates toward grafting of VAc on cellulose have been determined and were found to follow the order: Zn(acac)₂ > Al(acac)₃ > Fe(acac)₃. A plausible mechanism for grafting involving complex formation between metal chelates and vinyl monomer has been suggested. Several grafting experiments were carried out in presence of CCl₄, CHCl₃, CH₃CH₂CH₂SH and Et₃N. All these additives with the exception of Et₃N were found to suppress grafting.     

Über Chalkogenolate. 160. Umsetzung von 1,2-Ethandithiolaten mit Kohlenstoffdisulfid 2. 1,2-Ethan-bis(trithiokohlensäure) und Alkylester der Säure

On Chalcogenolates. 160. Reaction of 1,2-Ethanedithiolates with Carbon Disulfide. 2. 1,2-Ethane-bis(trithiocarbonic acid) and Alkyl Esters of This Acid The reaction of potassium 1,2-ethane-bis(trithiocarbonate) with hydrochloric acid at 0°C gives unstable, deep yellow coloured 1,2-ethane-bis(trithiocarbonic acid) The 1,2-ethane-bis(alkyl trithiocarbonates) RS? CS? SCH₂CH₂S? CS? SR, where R = CH₃ and C₂H₅, have been formed by reaction of potassium 1,2-ethane-bis(trithiocarbonate) with the corresponding alkyl iodide. The called compounds have been characterized by means of diverse spectroscopic methods.     

On the Modification of Chitosan Through Grafting

Abstract

The feasibility of grafting poly(methyl acrylate) and poly[1-(methoxycarbonyl) ethylene] onto chitosan, poly-β(1←-4)-2-amino-2-deoxy-d-glucose, was investigated. The grafting reaction was carried out in aqueous solution by using ferrous ammonium sulfate (FAS) in combination with H₂O₂ as redox initiator. The effects of such reaction variables as chitosan, monomer and initiator concentrations, reaction time, and reaction temperature were determined. Through this study the grafting reaction could be optimized. The grafting yield reached its maximum value of 332% when 0.3 g chitosan was copolymerized with 3 mL monomer at 70°C for 120 minutes with [FAS] = 6 × 10^?5 M, [H₂O₂] = 6 × 10^?3 M, and 8 mL water. The grafted chitosan was found to be insoluble in solvents for chitosan and solvents for poly(methyl acrylate), but did show swelling in dilute acetic acid, methanol, acetone, and in an ethanol/2% acetic acid 1:1 mixture. The thermal stability of chitosan and grafted chitosan were studied by dynamic thermogravimetric analysis. The results show that the graft copolymer is thermally more stable than pure chitosan. The overall activation energy for graft copolymerization was estimated to be 32.8 kcal/mol.     

Synthesis and characterization of polystyrene-grafted magnetite nanoparticles

Magnetite (Fe₃O₄) nanoparticles were synthesized by chemical precipitation. To reduce the aggregation of Fe₃O₄ nanoparticles, an effective surface modification method was proposed by grafting polystyrene onto the Fe₃O₄ particles. The results of Fourier transform infrared spectra and elemental analysis showed that the polymer chains have been successfully grafted from the surface of the Fe₃O₄ nanoparticles and that the percentage of grafting can reach 73%. Transmission electron microscope showed that grafted polymer chains on nanoparticles could prevent the aggregation of Fe₃O₄ nanoparticles markedly in toluene and improve their compatibility with organic phase. Another finding was the grafting reaction did not alter the crystalline structure of the Fe₃O₄ nanoparticles according to the X-ray diffraction patterns, and the saturation magnetization of PS-Fe₃O₄ nanoparticles was found to be lower than bulk magnetite.     

[Mn(H_2P_2O_7)_3]~(3-)引发淀粉与丙烯腈接枝聚合反应的动力学研究

以[Mn(H_2P_2O_7)_3]~(3-)为引发剂,研究了丙烯腈与玉米淀粉的接枝共聚反应。由实验结果求出了反应速率与引发剂浓度、单体浓度、淀粉浓度和反应温度的关系,推导并验证了接枝反应动力学模型,探讨了反应机理,求得了接枝反应活化能。     

Grafting onto wool. III. Graft copolymerization of poly(vinyl acetate) by use of fenton's reagent as initiator

In an attempt to modify fibrous protein, poly(vinyl acetate) has been graft copolymerized onto Himachali wool in an aqueous medium by using Fenton's reagent as redox initiator. Graft copolymerizations were carried out at 25, 30, 35, 40, and 45°C for a period of 3 hr. Percentage grafting was found to be dependent upon reaction temperature, concentration of monomers, and the molar ratio of [H₂O₂]/[Fe⁺²]. Maximum grafting occurred at 45°C with a molar ratio of [H₂O₂]/[Fe⁺²] = 1.43. A small amount of grafting (2.6–2.8%) occurred when grafting was effected at 45°C in the presence of Fe⁺² alone.     

Surface characterization of Co,K/La2O3 catalysts used for the catalytic combustion of diesel soot

Catalysts of Co,K/La₂O₃ have been prepared by wet impregnation. The samples have been calcined at 400°C and 700°C and have been characterized for phase composition using x‐ray diffraction and Fourier transform infrared spectroscopy. The XPS analysis of the samples has been obtained by examination of the O 1s, K 2p, C 1s and La 3d spectral regions. The XPS data are discussed with respect to the calcination temperatures and the soot combustion performed in the spectrometer reaction chamber. Analysis of the XPS data indicates considerable carbonation of the surfaces of all samples, even after burning the soot. The K/La₂O₃ solid presents the highest content of surface carbonated species, showing the highest catalytic activity for soot combustion. Interaction of the catalysts with CO₂ is studied by temperature‐programmed desorption and microbalance experiments. Kinetic studies and surface characterization of the potassium‐containing samples suggest that an appropriate surface potassium concentration is necessary for a synergetic action between potassium and lanthanum. In the cobalt‐containing catalysts calcined at 700°C, an increase is observed in the concentration of the outer‐layer perovskite species when the potassium content increases, following the same tendency observed in the bulk. Such LaCoO₃ species would limit the reaction of lanthanum with CO₂. Copyright © 2003 John Wiley & Sons, Ltd.     

Reactions of Aryl Benzoates with Potassium Aryloxides: Solvent Effects on Reaction Pathway and Kinetics

Temperature dependences of the relative reactivity of potassium aryloxides XC₆H₄O^?K⁺ toward 2,4‐dinitrophenyl benzoate in 50 mol% dimethylformamide (DMF)–50 mol% H₂O mixture have been studied using the competitive reactions technique. Correlation analyses of the relative rate constants k_X/k_H and differences in the activation parameters (ΔΔН^≠ and ΔΔS^≠) of the competitive reactions have revealed the existence of two isokinetic series of the reactions of 2,4‐dinitrophenyl benzoate with potassium aryloxides with electron‐donating substituent (EDS) and electron‐withdrawing substituent (EWS), respectively. We have investigated the effect of the substituent X on the activation parameters for each isokinetic series and concluded that the mechanism of the reactions of 2,4‐dinitrophenyl benzoate with potassium aryloxides XC₆H₄O^?K⁺ in 50 mol% DMF–50 mol% H₂O mixture is the same as in DMF. Analysis of the obtained data with using the method of two‐dimensional reaction coordinate diagram leads to the conclusion that the variation of the solvent from DMF to 50 mol% DMF–50 mol% H₂O mixture affects the reaction pathway. The rate constant k_X for the reaction of 3‐nitrophenyl benzoate with potassium 4‐methoxyphenoxide and the relative rate constants k_X/k_H for the reaction of 3‐nitrophenyl benzoate with potassium aryloxides XC₆H₄O^?K⁺ with EDS were measured in 50 mol% DMF–50 mol% H₂O mixtures at 25°C, and it has been shown that the addition of water to DMF does not change the mechanism but slows down these reactions.     

Cobalt Functionalization of Mesoporous Silica by Organosilane Grafting

MCM‐41, MCM‐48, and SBA‐15 have been functionalized with cobalt by grafting of different organosilane molecules and then calcined to remove the organic moieties. The materials have been characterized by N₂‐sorption, UV‐vis spectroscopy, TPR, ICP‐AES, XRD, and TGA. The nature of the formed cobalt species is dependent upon the number of amine groups in the organosilane molecules, due to the strength of the complexation. Only one amine group in the silane molecule leads to precipitation of Co₃O₄ particles during calcination, while two or more amine groups lead to the formation of cobalt silica at the surface. The obtained amount of precipitated cobalt in the samples is also dependent upon the number of amine groups and on the chain length of the silane molecules and the pore structure on the mesoporous material.     

Intramolecularly Double-Donor-Stabilized Stannylene and Its Coordination towards Ag(I) and Au(I) Centers

The intramolecularly double-donor-stabilized stannylene 1 has been synthesized from the salt-metathesis reaction between two equivalents of lithium pyridine ene-amide L1 and SnCl₂. Compound 1 exhibits dipolar behavior when reacted with B(C₆F₅)₃ leading to the zwitterionic compound 2 . The reaction of 1 with one equivalent and 0.5 equivalent of AgOTf (OTf=trifluoromethane sulfonate) result in the formation of a stannylene-AgOTf complex 3 and a homoleptic distannylene-silver ionic complex 4 , respectively. Analogous to complex 4 , the gold(I) complex 5 has been synthesized from the reaction between two equivalents of 1 and 0.5 equivalent of AuCl.SMe₂/Me₃SiOTf. Complex 5 is the first example of homoleptic stannylene-Au(I) ionic complex among the very scarce reports on stannylene-gold(I) coordination complexes. All compounds have been structurally characterized using single crystal X-ray crystallography. Solution-state characterization have been performed using multinuclear NMR techniques. Detailed DFT calculations on the optimized geometries 1 o , 3 o – 5 o reveal the change in sp- hybridization on the pyramidal Sn(II) center upon metal coordination and their bonding overlaps.     

Grafting onto cellulose. VIII. Graft copolymerization of poly(ethylacrylate) onto cellulose by use of redox initiators. Comparison of initiator reactivities

In an attempt to compare the relative reactivities of different redox systems in graft copolymerization of vinyl monomers onto cellulose, we studied grafting of ethylacrylate (EA) in aqueous medium by using the well-known redox intiator, ferrous ammonium sulfate–potassium persulfate (FAS–KPS) system, and its reactivity was compared with that of Fenton's reagent (Fe²⁺ ?H₂O₂) towards grafting of EA onto cellulose. Optimum conditions for affording maximum grafting were evaluated and percent grafting is expressed as functions of different reaction variables. Evidence of grafting was obtained from IR spectroscopic measurements, SEM, and TGA studies of the grafted and ungrafted cellulose. A plausible explanation for the observed reactivity pattern shown by (FAS–KPS) and (FAS–H₂O₂) redox systems is offered. Fenton's reagent (Fe²⁺ ?H₂O₂) was found to be several times more reactive than (FAS–KPS) redox system.     

Glycidyl Esters of Aromatic Acids

Abstract

The reaction of substituted benzoic acids, dicarboxylic acids such as phthalic, terephthalic, and isophthalic acids, and the sodium or potassium salts of these acids with equimolar or excess epichlorohydrin in the presence of benzyltrimethylammonium chloride has been studied using various solvents such as toluene, dioxane, monochlorobenzene, and tetrachloroethylene. Use of the free carboxylic acids gave only fair to low yields of glycidyl esters, while sodium or potassium salts of the carboxylic acids gave excellent yields of materials of high oxirane content. The epoxidation of chlorohydrin esters of these acids by the dehydrochlorination was also studied using various dehydrochlorinating reagents such as NaOH, KOH, Na₂CO₃, and NaAlO₂ in such solvents as water, dichloromethane, dioxane, and monochlorobenzene at various temperatures. Reaction time, reaction temperature, and water content were found to influence the yield of glycidyl esters. It is suggested that the reaction path involves nucleophilic attack upon the terminal position of the epoxide or epichlorohydrin. The resulting alkoxide then reacts further to give either a glycidyl ester or a chlorine-containing by-product, the predominant course depending upon reaction conditions.     

Synthesis and characterization of a new type of heterometallic derivative of zirconium

ZrCl₄ reacts with the potassium salt of the bifunctional tridentate Schiff base HOC₆H₄C(H)=NCH₂CH(Me)OH (LH₂) in a 1:1 molar ratio in benzene to give a new complex Zr(L)Cl₂ which, on reaction with different potassium isopropoxymetallates [e.g., KAl(OPr ⁱ )₄, KTi(OPr ⁱ )₅, and KNb(OPr ⁱ )₆], yield novel heterobimetallic derivatives. These new homo and heteronuclear coordination compounds have been characterized by elemental (N, Cl, Al, Ti, and Nb) analyses, molecular weight (ebullioscopic) measurements and spectral [i.r., n.m.r. (¹H, ¹³C and ²⁷Al)] studies and probable structures for them have been suggested.