含溴笼状磷酸酯的合成和热重分析研究

用１－氧基磷杂－４－羟甲基－２，６，７－三氧杂双环「２．２．２」辛烷（ＰＥＰＡ）、２，４，６－三溴苯酚与三氯氧磷反应制得化合物ＰＤＴＰ、ＴＤＰＰ及ＴＴＢＰ。分析了反应的进程，通过元素分析、ＩＲ和ＨＮＭＲ证明了化合物的结构，用热重法分析了ＰＤＴＰ、ＴＴＢＰ的热稳定性及成炭性。     

端羟基聚丁二烯/环氧氯丙烷合成多羟基聚丁二烯的实验研究

在氢氧化钠碱性条件下,以端羟基聚丁二烯(HTPB)和环氧氯丙烷(ECH)为原料,四丁基溴化铵(TBAB)为催化剂,制得多羟基聚丁二烯(PHPB)。采用红外光谱(IR)、热重分析仪(TG)、核磁共振(1 H-MNR)对原料、中间产物和产物的结构和热稳定性进行了分析。通过产品的羟值、粘度和产率详细考察了反应温度、反应时间、原料配比、催化剂用量和氢氧化钠用量对PHPB合成的影响。结果表明,最适宜合成工艺条件为:反应温度为55℃,反应时间1.5h,n(HTPB)∶n(ECH)∶n(NaOH)∶n(TBAB)=1∶2.9∶3∶0.03。     

Facile Synthesis of Polyhydroxylated Polybutadiene Derived from Hydroxyl-Terminated Polybutadiene via Thiol-Ene Click Reaction

Polyhydroxylated polybutadiene (PHPB) was synthesized via a thiol-ene click reaction between hydroxyl-terminated polybutadiene (HTPB) and 2-mercaptoethanol (ME) with 2,2’-azoisobutyronitrile (AIBN) as initiator. Effects of AIBN content, reaction time and temperature on the click reaction were investigated by determining hydroxyl value of the PHPB. The PHPB was characterized by FT-IR, ¹H-NMR, ¹³C-NMR and GPC. Relative reactivity of three types of C?C double bonds (1,2-vinyl, 1,4-cis and 1,4-trans units) in the HTPB reacting with the ME was discussed. The results showed that the optimal reaction conditions were that the AIBN content, reaction time and temperature were 2.0 wt%, 180 min and 70°C, respectively. Under these conditions, the hydroxyl value of the PHPB was 3.12 mmol·g^?1 when the HTPB/ME mass ratio was 10:2. All three types of C?C double bonds in the HTPB could react with the ME and the reactivity order was: 1,2-vinyl unit > 1,4-cis unit > 1,4-trans unit.     

Chain-extending of Hydroxytelechelic Polybutadiene: Synthesis and Characterization

Extension of hydroxytelechelic polybutadiene oligomers ( 3200 g/mol) is performed in mild conditions, in order to avoid backbone modifications, using succinic anhydride or methylenedicyclohexyl diisocyanate. The two routes present significative extension of the initial oligomers. Extension through the anhydride route, in the presence of DCC and DMAP, leads to new hydroxytelechelic oligomers ( 8000 g/mol). Extension through the diisocyanate route, catalyzed by DBTL at 65°C leads to hydroxytelechelic oligomers of higher average molecular weight ( 20000 g/mol). New materials are characterized by FTIR/¹H-NMR and changes in their Tg according to , are discussed. The influence of reaction time on the length of the macromolecular chains is also studied.     

端羟基聚丁二烯液体橡胶的合成、化学改性及应用

端羟基聚丁二烯(HTPB)是一种低分子量的遥爪液体橡胶,因具有玻璃化温度低、透明度好、黏度低、不易挥发、耐油耐老化、低温和加工性能好等优点,在军事和民用领域均具有广泛的应用。HTPB的性能主要受其主链微观结构的影响,不同的制备方法得到不同链结构的HTPB,其性能也有较大的差别。另外,通过对HTPB主链中的双键或末端羟基进行化学修饰可将其转变为不同分子结构或不同官能团的遥爪聚合物,赋予改性后的HTPB不同性能,并拓宽其应用领域。本文主要概述端羟基聚丁二烯的合成方法、化学改性和应用。     

New Bromine-Containing Symmetrical and Unsymmetrical Cage Phosphonates

Russian Journal of General Chemistry - As a result of brominating of symmetrical and unsymmetrical cage phosphonates, new mono- and dibromo-containing derivatives were obtained. Composition and...     

Palladium-Catalyzed Amination and Amidation of Benzo-Fused Bromine-Containing Heterocycles

Amination and amidation of bromoindole, 6-bromo-1,2,3,4-tetrahydrocarbazol-1-one, and 8-bromo-2,4,5,6-tetrahydro-1H-pyrazino[3,2,1-jk]carbazole derivatives was effected in the presence of palladium complexes. The use of the catalytic system Pd₂dba₃⋅CHCl₃-2-[di(tert-butyl)phosphino]biphenyl in the amination and of Pd₂dba₃⋅CHCl₃-Xantphos [or 3,5-(CF₃)₂Xantphos] in the amidation ensured moderate to high yields of the corresponding products.__________Translated from Zhurnal Organicheskoi Khimii, Vol. 41, No. 6, 2005, pp. 881–894.Original Russian Text Copyright © 2005 by Sergeev, Artamkina, Velezheva, Fedorova, Beletskaya.     

季戊四醇酯难燃绝缘油的研究

季戊四醇酯难燃绝缘油的研究陈尔凡，肖毅，徐新（沈阳化工学院高分子化工系沈阳１１００２１）关键词　难燃绝缘油，季戊四醇酯，Ｃ_（５－９）混合酸，酯化反应普通绝缘油（矿物油）耐热性差（闪点低），且使用寿命短。故国际上大力开展了难燃绝缘油的研制［１～５］，...     

Synthesis and Surface Properties of Polybutadiene Chains End-Capped with Two Types of Fluorosilicon Groups

Abstract

Polybutadiene diol chains were end-capped, using two highly fluorinated monochlorosilanes, specifically di(4-fluorophenyl)-methylchlorosilane and di[3,5-bis(trifluoromethyl) phenyl]methyl-chlorosilane. The resulting chains, with one and three fluorine atoms at their ends, respectively, were characterized using contact angle measurements, X-ray photoelectron spectroscopy (XPS), and Time-of-flight secondary ionization mass spectroscopy (TOFSIMS). The observed lowered surface tensions and results from the chemical analyses were consistent with migration of the fluorosilicon end groups to the polymer surfaces.

     

Synthesis of Low Molecular Distribution Dihydric Polybutadiene in the Presence of Triflic Acid

A method is described for the preparation of functional polybutadiene (PB) with hydroxyl groups along the polymer chain. This material can be used directly or as the starting substrate for further polymerization in both academic and industrial processes. We have developed a convenient method to obtain a polymer with a narrow molecular weight distribution and with a known content of hydroxyl groups along the backbone. By controlling the hydroxylation reaction conditions, the appropriate molar ratios of THF, water and acid with the epoxide are 30, 15 and 1.5, respectively. By minimizing the crosslinking reaction, the desired PB was prepared and subsequently characterized.     

线性/三臂星型端羟基聚丁二烯的活性负离子聚合及其表征

在环己烷溶剂中,以自制的叔丁基二甲基硅氧基丙基锂为引发剂,丁二烯为单体,四氢呋喃为结构调节剂,采用活性负离子聚合法合成了线形端羟基聚丁二烯(L-HTPB).在此基础上,以甲基三氯硅烷为偶联剂合成了星形端羟基聚丁二烯(S-HTPB).采用GPC和1H-NMR对L-HTPB和S-HTPB结构进行了表征,结果表明,采用负离子聚合法合成的2种聚合物具有相同的微观结构,且线形端羟基聚丁二烯的平均官能度大于1.9,星形端羟基聚丁二烯的平均支化度和平均官能度大于2.8,与理论设计值基本相符.另外,实验中通过调节溶剂中环己烷和四氢呋喃的比例来控制聚合物主链的微观结构.实验结果证实,随复配溶剂中环己烷用量的增加,聚合物1,4-结构相对含量逐渐增大,特别是顺式1,4-结构相对含量增大的趋势比较明显;当聚合溶剂采用单一的环己烷时,聚合物主链1,4-结构相对含量大于90%,顺式1,4-结构相对含量高达70%以上,聚合物主链中1,2-结构相对含量约为5.70%;相反,当聚合溶剂采用单一的四氢呋喃时,聚合物主链1,2-结构相对含量大于90%,而顺式1,4-结构相对含量趋于0,样品的外观表现为塑料.     

Flammability of diene rubbers

This paper presents the results of testing the flammability and fire hazard of butadiene (BR), butadiene-acrylonitrile (NBR) and butadiene- styrene (SBR) rubbers with the use of oxygen index test, ignition temperature measurement, cone calorimetry and inverse liquid chromatography. Toxicometric indices, RTFH _CO/CO2, W_LC50SM and the concentration of polycyclic aromatic hydrocarbons (PAH) have been determined. The results obtained have been interpreted from the point of view of the chemical constitution of the polymers tested.     

Flammability of butadiene-acrylonitrile rubbers

The paper discusses the test results of butadiene-acrylonitrile rubber, Perbunan NT 1845 and Perbunan NT 3945, flammability and properties that characterise these elastomers under fire conditions. The flammability was tested by means of oxygen index and thermovision methods. The thorough testing of flammability performed by means of a cone calorimeter made it possible to assess the behaviour of these polymers under fire conditions. The following properties of the tested copolymers were taken into account in this assessment: ignitability, heat release during combustion, smoke-forming capability and toxicity of the gaseous products of thermal decomposition and combustion. It has been found that the increase in the acrylonitrile unit content in the copolymer decreases its flammability and the relative toxic fire hazard, but clearly increases the smoke-forming capability and so the specific extinction area.The interpretation of test results of the elastomers under investigation takes into consideration their thermal stability assessed on the basis of differential thermal analysis, thermogravimetry and other complementary methods.This revised version was published online in November 2005 with corrections to the Cover Date.     

New Bromine-Containing Bis(arylimino)acenaphthenes and Related Metal Complexes

Russian Journal of Coordination Chemistry - The condensation reactions of 5-bromoacenaphthenequinone with 2,6-diisopropylaniline and 4?bromo-2,6-di-iso-propylaniline afford new mono- and...     

Flammability of wood-polypropylene composites

Addition of wood particles to polymers can cause a change of properties of the composites which depends on features of lignocellulosic materials and those of polymers. It is also observed in the flammability characteristics of the composites.In this work, the flammability of polypropylene composites with pine wood particles obtained by extrusion and press moulding was analyzed. The amount of wood particles was 50%. Polymers with various melt flow index (MFI) were used (Malen F-401, PP HY-202 and Malen S-702).The samples were tested using Cone Calorimeter at heat flux of 35 kW/m². Heat release rate (HRR) curves of composites show that thermal decomposition depends on the kind of polypropylene used. In the presence of PP HY-202 and Malen S-702, the flammability characteristic is similar to that of lignocellulosic materials, in contrast to composites with matrices prepared from Malen F-401. The observed phenomenon is interpreted in terms of the wettability of particles of pine wood by polymers of varying melt viscosity.     

聚丁二烯丙烯酸酯液态光学透明胶的合成及其UV固化膜的性能

针对丙烯酸酯大单体在合成过程中常带有颜色,以及由其制备的液态光学透明胶的UV固化膜易黄变的问题,本文报道了一条新的大单体合成路线:首先以端羟基聚丁二烯(HTPB)、萘钾、丙烯酰氯(AC)为原料,通过一锅法合成了一种无色透明的聚丁二烯丙烯酸酯大单体(PBAM);然后将PBAM与丙烯酸酯活性稀释单体、光引发剂混合,制备了液态光学透明胶;最后通过UV固化制备了一系列无色透明的薄膜。利用GPC、1H-NMR、FTIR等手段对PBAM进行了表征;进一步研究了液态光学透明胶UV固化膜的光学性能、耐黄变性能、耐低温性能等。结果表明:基于新路线合成的PBAM呈现无色透明,液态光学透明胶的UV固化膜展现出优良的光学性能和耐黄变性能,固化膜透光率高达98%;经紫外线加速老化264h后,色差(ΔE)≤1.5;此外,该固化膜还具有优良的耐低温性能,玻璃化转变温度为-30℃。     

Thermal Stability and Flammability of Polypropylene-Silsesquioxane Nanocomposites

This article presents a study of the thermal stability of polypropylene-based nanocomposites filled with tetrasilanolphenyl silsesquioxane (phPOSS). Nanofillers were introduced into a polypropylene matrix in three different amounts: 2, 5, and 10 wt.%. Investigations were carried out by means of thermogravimetric analyses conducted in inert and oxidizing atmospheres, Fourier transform-infrared spectroscopy, scanning electron microscopy, and flammability UL-94 test. The addition of phPOSS into the polymeric matrix increased thermal stability in comparison to neat iPP and introduced significant changes in the flammability of iPP/phPOSS nanocomposites.     

Synthesis of Polyol Tetrabromophthalate and Its Use as a Component for Preparing Foamed Polyurethanes of Reduced Flammability

A procedure was suggested for preparing brominated polyols of reduced viscosity for the synthesis of foamed polyurethanes of reduced flammability. The flame-retarding action of the synthesized polyol tetrabromophthalate in polyurethane was studied in comparison with that of other widely used flame retardants. Evaluation of the effect exerted on the flammability of the polurethane compound by the polyol tetrabromophthalate synthesized, melamine, and aluminum hydroxide shows that all the samples containing flame retardants are self-extinguishing. The shortest combustion time was observed for the sample containing 6% polyol tetrabromophthalate synthesized. The sample containing as a flame retardant additive solely the synthesized polyole tetrabromophthalate also exhibits the highest performance as a heat-insulating material from the viewpoint of thermal conductivity.

     

Complex Formation of Polybutadiene with Cyclodextrins

Polybutadienes were found to form inclusion complexes with cyclodextrins in high selectivity to give crystalline compounds. α‐Cyclodextrin and β‐cyclodextrin form complexes only with polybutadienes of low molecular weight and high 1,4‐addition content. Polybutadienes with high 1,2‐content gave complexes with γ‐cyclodextrin in low yield. The yields of the γ‐cyclodextrin complexes decreased with increasing molecular weights of the polybutadienes of similar composition. Complexes were isolated and characterized by means of FT‐IR, ¹H NMR, ¹³C CP/MAS NMR, ¹³C PST/MAS NMR spectroscopies, and X‐ray diffraction. Inclusion modes are discussed.