Effect of preparation conditions on the optical and physical properties of an epoxy-functional inorganic-organic hybrid material system

A hybrid material system consisting of (3-glycidyloxypropyl)trimethoxysilane, dimethyldimethoxysilane and zirconium(IV) n-propoxide was prepared. The influence of processing parameters including Zr content, UV irradiation and sol ageing on the properties of the resultant thin films was discussed. Refractive index, at 633 nm, and reflectance measurements were performed and near-field waveguide images of the samples were taken. Optical propagation loss measurements, at 633 nm, were studied. Film thickness and cross-sectional scanning electron microscopy images were obtained as a function of process conditions. FT-IR spectroscopy was used to monitor chemical reaction pathways in the system during processing. It was demonstrated that the crosslinking of epoxy groups in the structure, along with inorganic network formation as a result of sol-gel reactions, was the primary reason for the changes in the optical and physical properties of the system. As Zr containing species and/or UV irradiation may be employed to crosslink the epoxy groups in the structure, the optical and physical properties of the system can be tuned by optimal combination of these two crosslinking methods, as well as sol ageing process.     

Effect of preparation conditions on the thermal stability of an epoxy-functional inorganic-organic hybrid material system with phenyl side group

A hybrid material system consisting of (3-glycidyloxypropyl)trimethoxysilane and dimethyldimethoxysilane as matrix materials and diphenyldimethoxysilane (DPDMS) as both a matrix material and a potential thermal stabiliser by the sol-gel method. A detailed thermogravimetric analysis study of the influence of processing parameters, including DPDMS content, UV irradiation and sol ageing, on the thermal stability of the resultant thin films was presented. FT-IR spectroscopy was used to monitor the changes in the relative amount of epoxy rings in the system during processing. It was demonstrated that the crosslinking of epoxy groups in the structure is the primary reason for changes in the thermal stability of the system. It was also shown that the thermal stability, in terms of 10% mass loss, of the material system could be improved up to 280 °C, by adjusting the preparation conditions, compatible with several subsequent high temperature optoelectronic integration processes.     

The effect of carbon nanotubes on epoxy matrix nanocomposites

The paper concerns thermal properties of epoxy/nanotubes composites for aircraft application. In this work, influence of carbon nanotubes on thermal stability, thermal conductivity, and crosslinking density of epoxy matrix was determined. Three kinds of nanotubes were used: non-modified with 1- and 1.5-μm length, and 1-μm length modified with amino groups. Scanning electron microscopy observations were done for examining dispersion of nanotubes in the epoxy matrix. Glass transition temperature (T _g) was readout from differential scanning calorimetry. From dynamic mechanical analysis, crosslinking density was calculated for epoxy and its composites. Also, thermogravimetric analysis was done to determine influence of nanotubes addition on thermal stability and decomposition process of composites. Activation energy was calculated from TGA curves by Flynn–Wall–Ozawa method. Thermal diffusivity was also measured. SEM images proved the uniform dispersion of carbon nanotubes without any agglomerates. It was found that nanotubes modified with amino groups lead to the increase of epoxy matrix crosslinking density. The significant increase in T _g was also observed. On the other hand, addition of carbon nanotubes leads to the decrease of thermal stability of polymer due to the increase of thermal diffusivity.     

Structure,thermal stability,and photocrosslinking characterization of HDPE/LDH nanocomposites synthesized by melt‐intercalation

Structure, thermal properties, and influence of layered double hydroxide (LDH) fillers on photocrosslinking behavior of high‐density polyethylene (HDPE)/LDH nanocomposites have been studied in the present article. The X‐ray diffraction and transmission electron microscopy analysis demonstrate that the completely exfoliated HDPE/LDH nanocomposites can be obtained by controlling the organomodified LDH loading via melt‐intercalation. The data from the thermogravimetric analysis show that the HDPE/LDH nanocomposites have much higher thermal stability than HDPE sample. When the 50% weight loss was selected as a comparison point, the decomposition temperature of HDPE/LDH sample with 5 wt % LDH loading is ～40 °C higher than that of HDPE sample. The effects of UV‐irradiation on the HDPE/LDH nanocomposites show that the photoinitiated crosslinking can destroy the completely exfoliated structure to form the partially exfoliated structure, which decreased the thermal stability of the nanocomposites. However, the thermal stability of photocrosslinked samples can increase with increasing the UV‐irradiation time. The effect of LDH loading on the gel content of UV‐irradiated nanocomposites shows that the LDH materials can greatly absorb the UV irradiation and thus decrease the crosslinking efficiency. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3165–3172, 2006     

Synthesis and photochemical properties of novel multifunctional photopolymers with both pendant epoxy groups and phenacyl ester groups

Novel multifunctional photopolymers with both pendant epoxy groups and phenacyl ester groups were synthesized by the one‐pot method for the reaction of poly(methacrylic acid) with epibromohydrin; this was followed by a reaction with phenacylbromide with 1,8‐diazabicyclo‐[5.4.0]undecene‐7 as a condensation reagent. These esterification reactions proceeded smoothly and quantitatively under mild conditions. Moreover, the photochemical reactions of the resulting polymers were evaluated by UV and IR spectroscopy. The pendant phenacyl ester groups were photocleaved to give corresponding carboxyl groups, and then the produced carboxyl groups reacted with pendant epoxy groups. Furthermore, the baking process promoted a crosslinking reaction because of the addition reaction of epoxy groups with carboxyl groups after irradiation. It was also proven that the photochemical reactivity of the resulting polymers was affected by the structure of the phenacyl ester group. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 530–538, 2001     

Thermal and physical properties of flame-retardant epoxy resins containing 2-(6-oxido-6H-dibenz〈c,e〉〈1,2〉oxaphosphorin-6-yl)-1,4-naphthalenediol and cured with dicyanate ester

2-(6-oxido-6H-dibenz(c,e)(1,2)oxaphosphorin-6-yl)-1,4-naphthalenediol (DOPONQ) was prepared by the addition reaction of 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) with 1,4-naphthoquinone. The phosphorus-containing diol (DOPONQ) was used as a reactive flame retardant by an advancement reaction with the diglycidyl ether of bisphenol-A epoxy (DGEBA) resin at various stoichiometric ratios. DOPONQ-containing advanced epoxy was separately cured with various dicyanate esters to form flame-retardant epoxy/cyanate ester systems. The effect of the phosphorus content and dicyanate ester structure on the curing characteristic, glass transition temperature, dimensional stability, thermal stability, flame retardancy, and dielectric property was studied and compared with that of the control advanced bisphenol-A epoxy system. The DOPONQ-containing epoxy/cyanate ester systems exhibited higher glass transition temperatures as well as better thermal dimensional and thermal degradation stabilities. The flame retardancy of the phosphorus-containing epoxy/dicyanate ester system increased with the phosphorus content, and a UL-94 V-0 rating could be achieved with a phosphorus content as low as 2.1%.     

邻偶氮萘醌磺酸基为负离子的二苯胺—4—重氮盐：———甲醛树脂的制备与性质

二苯胺－４－重氮盐与邻偶氮萘醌磺酸酯均具有很高的光敏性，分别是阴图型和阳图型预涂感光印刷版（ＰＳ版）的感光剂，用它们制备阴图型和阳图型ＰＳ版已有很多专利报道．重氮基与邻偶氮萘醌基的光分解分属两种类型，前者的中间体为自由基或正离子［１，２］，后者为碳卡...     

Free volume hole size of Cyanate ester resin/Epoxy resin interpenetrating networks and its correlations with physical properties

Cyanate ester (CE) resin was blended with epoxy resin (EP) at different mass ratios (CE/EP: 100/0, 90/10, 70/30, 50/50, 30/70, 10/90, and 0/100). The curing process of the blend system was characterized by Fourier transform infrared spectrometry (FTIR) and differential scanning calorimetry (DSC). Examination of the mechanical properties, thermal stability, and morphology of the blend systems showed that addition of epoxy resin resulted in improved toughness but a little sacrifice in thermal stability when compared with neat CE. The free volume size of the blend system determined by positron annihilation lifetime spectroscopy (PALS) decreased with the epoxy resin content, which is consistent with the chemical structure changes for the copolymerization between CE and EP. The crosslinking units of curing products (oxazoline, oxazolidinone, and polyether network) of the blends are all smaller in size than those of triazine ring structure from neat CE. Therefore, the free volume size of the blends decreases with increase of EP content. The correlations between the free volume properties and other physical properties (thermal stability and mechanical properties) have also been discussed.     

Cationic polymerization and physicochemical properties of a biobased epoxy resin initiated by thermally latent catalysts

The cationic polymerization and physicochemical properties of a biobased epoxy resin, epoxidized castor oil (ECO), initiated by N-benzylpyrazinium hexafluoroantimonate (BPH) and N-benzylquinoxalinium hexafluoroantimonate (BQH) as thermally latent catalysts were studied. As a result, BPH and BQH show an activity at different temperatures in the present systems. The cured ECO/BPH system showed a higher glass transition temperature, a lower coefficient of thermal expansion, and higher thermal stability factors than those of the ECO/BQH system. On the other hand, the mechanical properties of the ECO/BQH system were higher than those of the ECO/BPH system. These have been attributed to the differences in crosslinking level of cured resins, which were induced by the different activity of the latent catalysts.     

Synthesis of a new hyperbranched‐linear‐hyperbranched triblock copolymer and its use as a chemical modifier for the cationic photo and thermal curing of epoxy resins

A new hyperbranched‐linear‐hyperbranched polymer was prepared in a one pot process by reaction of 4,4‐bis(4‐hydroxyphenyl)valeric acid and poly(ethylene glycol) (HPH). After characterization by ¹H and ¹³C NMR, SEC, DSC, and TGA, this polymer was used, in proportions of 5, 10, and 15 phr, as a chemical modifier in the UV and thermal cationic curing of 3,4‐epoxycyclohexylmethyl‐3′,4′‐epoxycyclohexyl carboxylate epoxy resin. The curing process was studied by calorimetry, demonstrating the accelerating effect of the hydroxyl groups present in HPH's structure. The morphology of the resulting thermosets depended on the curing system used, as demonstrated by FE‐SEM microscopy, but in both cases phase separation occurred. Thermosets obtained by thermal curing presented lower thermal stability than UV‐cured materials. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

UV stability of HMS-PP (high melt strength polypropylene) obtained by radiation process

HMS-PP in grains was synthesized by the gamma irradiation of PP under a crosslinking atmosphere of acetylene, followed by thermal treatment for radical recombination and thermal treatment for annihilation of the remaining radicals. The UV stability of the material was evaluated in pellet form. The accelerated weathering test of HMS-PP samples were performed under artificial ultra-violet light and in a condensation chamber Comexim (C-UV type) apparatus with UV exposure for 120 and 240 h. The results were compared to those from ageing caused by sunlight and dew under natural exposition. This work investigated changes in mechanical proprieties (elongation and rupture strength), Fourier transform infrared spectroscopy (FTIR), optical microscopy (MO), scanning electron microscopy (SEM) and rheological properties of HMS-PP after the UV ageing. We find that the HMS-PP has more degradation than regular PP and undergoes predominate chain scission in aggressive UV ageing conditions.     

UV-curing behavior and adhesion performance of polymeric photoinitiators blended with hydrogenated rosin epoxy methacrylate for UV-crosslinkable acrylic pressure sensitive adhesives

UV-crosslinkable polyacrylates were synthesized for use as pressure sensitive adhesives (PSAs). These polyacrylates acted as polymeric photoinitiators due to the benzophenone incorporated into their backbones. Hydrogenated rosin epoxy methacrylate (HREM; based on hydrogenated rosin and glycidyl methacrylate) was also synthesized as a tackifier, and blended at different levels with the synthesized, UV-crosslinkable polyacrylates for use as PSAs. The effect of the new tackifier, HREM, on the properties of the UV-crosslinkable PSAs was examined in comparison with the properties exhibited by PSA/hydrogenated rosin blends. The characteristics of these PSA/tackifier blends were examined by Fourier-transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC) and an advanced rheometric expansion system (ARES). In addition, the adhesion performance of the PSA blends was investigated using probe tack tests. DSC and ARES revealed all the PSA blends with HREM or hydrogenated rosin to be miscible at the molecular level. The glass transition temperature (T_g) of HREM was −25.6 °C, which is lower than that of other commercially available rosin tackifiers. FTIR revealed changes in the relative concentration of benzophenone groups in the PSAs at 1580 cm⁻¹, which demonstrated that the crosslinking efficiency is proportional to the benzophenone content and UV dose, but decreases with increasing hydrogenated rosin content. However, the reduced crosslinking reaction efficiency was improved in the PSA/HREM blends due to the low T_g of HREM which only slightly increased the T_g of the PSA blends. Moreover, the relative initial decrease in the probe tack of the PSA/HREM blends was lower than that of the PSA/hydrogenated rosin blends after UV irradiation.     

Curing studies of epoxy resin with nadic endcapped phosphorylated amines

Polyimides have aromatic moieties in the backbone structure which are responsible for their increased thermal stability. If phosphorus is introduced in the main chain structure of polyimides, there is further improvement in the thermal stability. This has been proved by the work carried out in our group. The polyimide having amine termination can be used for crosslinking of epoxy resins.In the present study amine terminated phosphorus containing nadicimide were taken as curing agent for DGEBA resins. The curing characteristics of DGEBA resin were studied by DSC using different amounts of nadic endcapped phosphorylated amines. DSC thermogram showed the heat of polymerization was lower as compared to system cured with aromatic amines.     

The revival of electron beam irradiation curing of epoxy resin—materials characterization and supportive cure studies

Polymeric composite manufacturing is a large, rapidly growing and energy consuming industry, where there is an obvious and compelling need for innovative curing technologies conforming to energy efficiency and environmental protection trends. This has led to many research efforts to consider, or in some cases re‐consider, irradiation curing of polymer composites. However, there is still a stifling lack of knowledge of the fundamental mechanisms to obtain homogeneity in the irradiation curing of composites. The key issue of the irradiation curing process, i.e. homogeneous curing affected by electron beam dose and initiator concentration for an epoxy resin is the focus of this paper. The temperature profiles, microstructure, curing degree gradient, and thermomechanical properties of electron beam‐ irradiated epoxy resin were profiled and analyzed, and the results indicated that curing degree in the epoxy resin showed a relatively steady region and an accelerated decrease along the depth direction. It is revealed that there existed an optimal range of concentration of the initiator for irradiation curing of an epoxy resin system. The inhomogeneity in the irradiation‐induced crosslinking structure could be abated by adopting the properly applied irradiation energy and the matching between the irradiation dose and the concentration of the initiator. It can be deduced that for most of the composite products with large thickness, layer upon layer irradiation or irradiation from two sides could be more efficient to obtain a homogeneous crosslinking structure. Copyright © 2009 John Wiley & Sons, Ltd.     

Role of photoadduct of K4Fe(CN)6 and C3H4N2 in improving thermal stability of polyaniline composite

This paper involves the synthesis of polyaniline composite with photoadduct of potassium hexacyanoferrate and imidazole via photochemical route by oxidative polymerization technique by ammonium persulphate. The photoadduct has been synthesized by photoirradiation followed by substitution with imidazole ligand. The photoaquation, substitution and successful synthesis has been proved by recording pH, UV visible spectra before and after irradiation and XRD of photoadduct. The as synthesized composite has been subjected to various characterizations like elemental analysis, UV–Visible spectra, FTIR, XRD, SEM, and TG/DTG. XRD of photoadduct shows crystalline structure which has been retained in the composite, changing the amorphous structure of polyaniline into the crystalline one, hence proving the insertion of photoadduct in the polymer chain. Various parameters like crystallite size (L), interplanar distance (d), micro strain (ε), dislocation density (δ) and distortion parameters (g) were calculated from XRD data. Thermal analysis shows the high thermal stability of composite which can be due to strong interaction between polymer chain and the photoadduct which restricts the thermal motion of polyaniline and thus enhances the thermal stability of composite.     

热稳定剂对PVC紫外光老化过程中微观结构及宏观性能演变的影响

通过UV-Vis、FTIR、DSC、以及色差、力学性能的测试表征,实时追踪分析了在紫外光老化过程中,含Pb、Sn以及Ca-Zn热稳定剂的PVC体系微观结构和宏观性能的演变过程.结果表明,在相同光老化条件下,PVC/Pb、PVC/Sn和PVC/Ca-Zn体系的微观结构变化规律基本一致,过程中主要的化学反应是,大分子吸收光能后,发生脱HCl生成共轭双键的反应、生成羰基的氧化反应、交联反应和降解反应;不同热稳定剂的作用,主要表现在对于微观结构变化的幅度和动力学过程的影响不同.相应地,3种体系的外观色差和力学性能的变化规律也相似,但色差的变化程度和速度以及老化后力学性能的保持率因所含热稳定剂的不同而不同,其中含Sn体系的颜色稳定性最好,含Pb体系的力学性能保持率最高。     

A polymeric photobase generator containing oxime–urethane groups: Crosslinking reaction and application to negative photoresist

A polymeric photobase generator containing oxime–urethane groups was prepared by copolymerization of methyl methacrylate and methacryloxyethyl benzophenoneoxime urethane, and its photo and thermal crosslinking reaction after irradiation was examined from the measurement of UV and IR absorption spectral changes, insoluble fraction, and molecular weight changes. The photo‐crosslinking reaction of the copolymer film was more efficient when irradiations were carried out with 310 nm UV light in the presence of benzophenone than with 254 nm UV light without the addition of benzophenone. The crosslinking reaction increased after postexposure baking (PEB), and this thermal crosslinking reaction mechanism was studied from the identification of the photolysis products of a model compound, benzophenoneoxime phenylurethane, by a high‐performance liquid chromatography. The results indicate that the thermal crosslinking reaction of the copolymer after PEB is due to the formation of urea‐type chemical bonds. Resist properties of the copolymer were examined from the measurement of normalized thickness and micropattern development. A negative tone image with a resolution of 2 μm was obtained with this copolymer, having a sensitivity (D) of 1200 mJ/cm² and contrast (γ_n) of 1.31, when irradiation was carried out with 310 nm UV light in the presence of benzophenone following chloroform development. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 975–984, 2004     

Photochemical stability of poly(vinyl pyrrolidone) in the presence of collagen

The photochemical stability of poly(vinyl pyrrolidone) (PVP) in the presence of 1%, 3% and 5% of collagen has been studied by UV-vis spectroscopy, Fourier transform infrared spectroscopy (FTIR), thermogravimetry analysis (TG) and derivative thermogravimetry (DTG). Surface properties have been studied by contact angle measurements. PVP samples and samples containing 1%, 3% and 5% of collagen were irradiated with UV light of wavelength λ = 254 nm in air for up to 24 h. The amount of gel created during UV irradiation was estimated.PVP in the presence of 1%, 3% and 5% of collagen is less stable both thermally and photochemically. Collagen enhances photochemical processes leading to crosslinking of PVP. The contact angle measurements and values of surface free energy showed that the wettability of PVP films was changed by the addition of collagen and by UV irradiation. The increase of polarity of samples indicates an efficient photooxidation on the surface upon UV irradiation.     

Photocrosslinking of poly(N-vinylcarbazole): Implementing a complementary set of techniques to characterize the three-dimensional network formation

The crosslinking of poly(N-vinylcarbazole) PVK resulting from UV irradiation (λ > 300 nm) was studied by combining various techniques including infrared spectroscopy, size exclusion chromatography (SEC), differential scanning calorimetry (DSC), swelling ratio, positron annihilation spectroscopy (PAS) and thermoporosimetry. The results obtained from all of these techniques were correlated and allowed a complete monitoring of the crosslinking during irradiation, from the creation of the first crosslinks to the formation and densification of the three-dimensional network. From SEC analysis and determination of swelling ratios, it was demonstrated that crosslinking was the predominant mechanism during the first stages of irradiation. PAS and DSC analyses revealed a good correlation between variations of free volume and increase of glass transition (T_g) of the bulk material. In addition, the development of the polymer architecture shown by the growth of T_g was nicely correlated with the modifications of the chemical structure observed by infrared analysis. Thermoporosimetry allowed the determination of the mesh size distributions within the polymer for the longest irradiation times. Numerical relationships were established and their validity was checked.     

Effect of the substituted benzene group on thermal and mechanical properties of epoxy resins initiated by cationic latent catalysts

Epoxy resins (DGEBA) were cured by cationic latent thermal catalysts, that is, N‐benzylpyrazinium hexafluoroantimonate (BPH) and N‐benzylquinoxalinium hexafluoroantimonate (BQH) to investigate the effect of substituted benzene group on cure kinetics and mechanical properties of epoxy system. Differential scanning calorimetry (DSC) was undertaken for activation energy of the system. It was also characterized in terms of flexural, fracture toughness, and Izod impact strengths for the mechanical tests. As a result, the cure reaction of both epoxy systems resulted in an autocatalytic kinetic mechanism accelerated by hydroxyl groups. Also, the conversion and cure activation energy of the DGEBA/BQH system were higher than those of DGEBA/BPH system. The mechanical properties of the DGEBA/BQH system were also superior to those of the DGEBA/BPH system, as well as the morphology. This was probably due to the consequence of the effect of the substituted benzene group of the BQH catalyst, resulting in increasing the crosslinking density and structural stability in the epoxy system studied. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2419–2429, 2004