Thermogravimetric study of some crosslinked copolymers based on poly(acrylonitrile-co-divinylbenzene)

Copolymer networks based on acrylonitrile (AN)/divinylbenzene (DVB) have been investigated by thermogravimetric analysis (TG) to evaluate their thermal stability in nitrogen atmosphere. Thermal stability was determined from TG-DTG curves to investigate the influence of AN and DVB in the synthesis of copolymers on the copolymer thermal properties. The TG and DTG curves of copolymers clearly show two thermodegradation stages. The solid residues produced after thermodegradation stages were analyzed by FTIR and elemental analysis (CHN). The decomposition temperatures were dependent on amount of AN and DVB used as the crosslinking agent. The degradation temperatures of copolymers were influenced by the diluent system during their synthesis. FTIR analyses indicate that the cyclization of the polymer proceeds before any mass loss.     

Thermal properties of polyimide system containing silicone segments

The influence of the structure properties relationships of silicone incorporated polyimide (PI) on thermal stability was investigated by using single scan thermogravimetric analysis (TG) and differential scanning calorimetry (DSC) in nitrogen. Four systems have been synthesized based on monomer 4-(4-(1-(4-(4-aminophenoxy) phenyl)-1-methylethyl) phenoxy) aniline (BAPP)/3,3??,4,4??-Biphenyltetracarboxylic dianhydride including parent PI (S-1), PI siloxane copolymer (S-2 and S-3), and PI siloxane hybrid (S-4). The derivative thermogravimetric analysis (DTG) and DSC curves indicate a double and single stage decomposition process and glass transition temperature (T _g), respectively. While the PI, PIS, and PSH showed distinctive features towards thermal analysis, it was found that the rate of degradation (???/??t) was influenced by the flexibility of Si?CO?CSi in the backbone and in Si?CO?CSi itself. These results revealed that the presence of Si?CO?CSi in either the backbone or matrix indicates its stability with regard to high thermal service applications.     

Study of the thermal behaviour of some transition metal acrylate-styrene copolymers

The processes of thermal destruction of copolymers of styrene with zinc, cobalt, nickel and copper acrylates have been studied by TG and the temperature characteristics have been determined. While the thermal stability of zinc-containing copolymers increases at higher metal contents, that of other metal-containing copolymers decreases and, depending on the metal, changes in the sequence Co > Ni > Cu. The kinetic parametersn, E _a ,Z and ΔS have been determined by the Horowitz-Metzger method and discussed. The resultingE _a sequence is in agreement with the observed sequence of thermal stability of the copolymers. The entropy factor suggests thermodynamic hindrance in the decomposition of copolymers of low thermal stability and a preference for the decomposition of copolymers of high thermal stability.     

Thermal stability of poly(mono-n-alkylitaconates) and mono-n-alkylitaconate-co-vinylpyrrolidone copolymers I

Poly(monoitaconates) containing octyl, decyl and dodecyl groups and random monoalkylitaconate-co-vinylpyrrolidone copolymers were studied by thermogravimetric analysis. Copolymers of mono-n-octylitaconate (MOI), mono-n-decylitaconate (MDI), and mono-n-dodecylitaconate (MDoI), respectively, with N-vinyl-2-pyrrolidone (VP) of different compositions were studied by dynamic thermogravimetric analysis. The thermal stability of the copolymers depends on the structure of the monoitaconate comonomer and on the composition of the copolymer The kinetic analysis of the degradation data shows that the thermal decomposition of these copolymers can be described by several kinetic orders depending on the copolymer and on the composition. The relative thermal stability of the copolymers increases as the VP content increases and as the length of the side chain of the itaconate increases, following the same trend as the flexibility of the copolymers in solution.     

Thermal stability of copolymer derived from l-lactic acid and poly(tetramethylene) glycol through direct polycondensation

The thermogravimetric analysis (TG) of triblock copolymers (PLAG) based on poly(l-lactic acid) (PLLA) and poly(tetramethylene) glycol (PTMEG) segments with different PTMEG content and catalyst concentration was conducted. The thermal degradation behaviors of copolymers were determined by thermogravimetric analysis and the results are also confirmed by hydrogen nuclear magnetic resonance spectrometry (¹H NMR). The thermal stability of PLA-based copolymer is improved with decreasing use level of Sn catalyst and short-chain molecules with hydroxyl and carboxyl end group also have a significant effect on the thermal degradation of chain-extended products of copolymer (PLAE). PLAE-10 with 0.5 wt% catalyst shows two main decomposition kinetic mechanisms. On the other hand, PLAE-10 with 0.05 wt% catalyst mainly undergoes Sn-catalyzed selective depolymerisation. Moreover, the PTMEG segments in PLAEs seem to increase the mobility of the Sn salt moiety in PLAEs and the activation energy (E _a) decreases with increasing the PTMEG content in PLAEs.     

Thermal decomposition of barium(II) tetraphenylborate

Barium(II) tetraphenylborate, Ba(Bph₄))₂·4H₂O was prepared, and its decomposition mechanism was studied by means of TG and DTA. The products of thermal decomposition were examined by means of gas chromatography and chemical methods. A kinetic analysis of the first stage of thermal decomposition was made on the basis of TG and DTG curves and kinetic parameters were obtained from an analysis of the TG and DTG curves using integral and differential methods. The most probable kinetic function was suggested by comparison of kinetic parameters. A mathematical expression was derived for the kinetic compensation effect.     

Synthesis and impact properties of siloxane–DGEBA epoxy copolymers

Siloxane-incorporated epoxy (ESDG) copolymers were prepared by a hot-melt method. IR, ¹H- and ¹³C-NMR are used to determine the structures. The data on the molecular properties indicate that reaction proceeded with a random polycondensation without involving the opening of the oxirane ring in the epoxy structure. Lowering T_gs with increasing siloxane content in copolymers are observed except for the copolymer modified with PDMS siloxane oligomer. Thermal stability data indicate that siloxane moiety exerts its thermal stability on the copolymer through dissipation of the heat, thus delaying thermal degradation of copolymers. Increasing impact strengths in J/M in the range of 22.0–59.0 are observed for copolymers and the improvement of the impact strength is closely related to the structure and content of siloxane oligomers in copolymers. A rough surface was observed by SEM examination on the propagation surface of the copolymeric impact specimen, while a smooth surface is observed on the unmodified epoxy specimen. The EDX analysis reveals these protruded features are Si-rich segments. The morphological observations suggest the siloxane segment may act as a toughening agent in the epoxy networks, thus contributing to the impact improvement of the copolymers. © 1996 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 34:1907–1922, 1996     

Thermal and rheological behaviour of some random aromatic polyethersulfone/polyetherethersulfone copolymers

The thermal and rheological behaviour of seven random Cl-ended aromatic PES/PEES copolymers (M_n ≈ 9500 g mol⁻¹), at various PES/PEES repeating unit ratios, was studied. The glass transition temperatures (T_g), determined by DSC experiments, showed a dependence on copolymer composition significantly different from the ideal linear behaviour expected on the basis of Fox equation. Degradations were carried out in the scanning mode, under flowing nitrogen, in the temperature range 35-650 °C and a single degradation stage was observed for all copolymers. The initial decomposition temperatures (T_i) and the half decomposition temperatures (T_1/2) were directly determined by TG curves, while the apparent activation energies of degradation (E_a) were obtained by the Kissinger method. In addition, the complex viscosity (η^∗) of molten copolymers was determined in experimental conditions of linear viscoelasticity. T_i, T_1/2, E_a, and η^∗ values were depending on copolymer composition, showing a trend similar to that of T_g values. The results obtained were discussed and interpreted.     

Biosynthesis and characterization of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) copolymer from wild-type Comamonas sp. EB172

Poly(3-hydroxybutyrate) [P(3HB)] homopolymer and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3HB-co-3HV)] copolymer was produced by Comamonas sp. EB172 using single and mixture of carbon sources. Poly(3-hydroxyvalerate) P(3HV) incorporation in the copolymer was obtained when propionic and valeric acid was used as precursors. Incorporation of 3HV fractions in the copolymer varied from 45 to 86 mol% when initial pH of the medium was regulated. In fed-batch cultivation, organic acids derived from anaerobically treated palm oil mill effluent (POME) were shown to be suitable carbon sources for polyhydroxyalkanoate (PHA) production by Comamonas sp. EB172. Number average molecular weight (M_n) produced by the strain was in the range of 153-412 kDa with polydispersity index (M_w/M_n) in the range of 2.2-2.6, respectively. Incorporation of higher 3HV units improved the thermal stability of P(3HB-co-3HV) copolymer. Thus the newly isolated bacterium Comamonas sp. EB172 is a suitable candidate for PHA production using POME as renewable and alternative cheap raw materials.     

H NMR study of temperature-induced phase separation in solutions of poly(N-isopropylmethacrylamide-co-acrylamide) copolymers

¹H NMR spectroscopy was applied to investigate temperature-induced phase separation in solutions of poly(N-isopropylmethacrylamide-co-acrylamide) [P(IPMAm/AAm)] random copolymers in D₂O, D₂O/ethanol and D₂O/acetone. The NMR relaxation behaviour of water (HDO) was also examined. The effects of P(IPMAm/AAm) composition and the ethanol or acetone content in the mixed solvents on the temperature, width and extent of the phase transition as well as on the mobility of polymer segments and water molecules were characterized. For D₂O solutions of the copolymers prepared with the AAm fraction in the polymerization mixture not exceeding 25 mol% ¹H NMR spectra show dynamic heterogeneity of copolymer chains in mesoglobules where AAm sequences and surrounding short IPMAm sequences are hydrated and mobile, while sufficiently long IPMAm sequences are dehydrated and their mobility is strongly reduced. The obtained results are consistent with the idea that P(IPMAm/AAm) copolymer mesoglobules are rather porous and disordered.     

Thermal degradation and their kinetics of biodegradable poly(butylene succinate-co-butylene terephthate)s under nitrogen and air atmospheres

In this study, thermal degradation and their related kinetics have been investigated mainly by means of thermal gravimetrical analyzer (TGA) under the dynamic nitrogen and air atmospheres for the chemically prepared biodegradable aliphatic-aromatic copolyesters of poly(butylene succinate-co-butylene terephthalate) (PBST). To further shed new lights on the comonomer molar composition and experimental condition dependences of thermal degradation kinetics, the as-known Friedman model was at first applied to quantitatively evaluate the kinetic parameters in terms of activation energy (E), degradation reaction order (n) and the frequency factor (Z). The results clearly demonstrated that thermal stabilities of these PBST copolyesters were substantially enhanced with the incorporation of more rigid butylene terephthalate comonomer, and tended to be much better in nitrogen than in air. Furthermore, the Friedman, Freeman-Carroll and Chang models were concurrently employed to quantitatively evaluate the thermal degradation kinetic parameters of the PBST copolyesters in nitrogen at different heating rates of 1, 2 and 5 K/min. It was found that the thermal degradation kinetic parameters for the PBST copolyesters were strongly dependent on the heating rate and calculating models. In addition, life-time parameters of the biodegradable PBST copolyesters were first calculated to predict the maximum usable temperatures, and this would be useful for practical application of these new bio-based green plastics.     

Preparation of poly(lactide-co-glycolide-co-caprolactone) nanoparticles and their degradation behaviour in aqueous solution

The tri-component copolymer poly(lactide-co-glycolide-co-caprolactone) (PLGC) was synthesized to prepare nanoparticles by the modified spontaneous emulsification solvent diffusion method (modified-SESD method); and the method was also modified by using the Tween60 instead of poly(vinyl alcohol) (PVA) as dispersing agent. The obtained nanoparticles have spherical shape and good particle distribution with mean size in the range from 100 to 200 nm. The in vitro degradation behaviour of PLGC nanoparticles was investigated. It was found that PLGC nanoparticles could remain stable during the degradation with no agglomeration. Compared with PLA and PLGA nanoparticles, the degradation rate of PLGC nanoparticles is faster. After 9 weeks of hydrolysis, the M_n of PLGC is less by 10% of the original M_n. The mean radius of the nanoparticles increases from 68 nm to 80 nm continuously during the first stage, and after 4 weeks of degradation, the particles' size decreases gradually from 80 nm to about 40 nm. These results suggest that the PLGC nanoparticles may show degradation-controlled drug release behaviour and seem to be a promising drug delivery system.     

Thermal stability and degradation kinetics of novel organic/inorganic epoxy hybrid containing nitrogen/silicon/phosphorus by sol-gel method

Hybrids containing silicon, phosphorous and nitrogen were prepared by the sol-gel method and compared with pure epoxy. The silicon, phosphorous and nitrogen components were successfully incorporated into the networks of polymer. Thermogravimetric analysis (TGA) was used for rapid evaluation of the thermal stability of different materials. The integral procedure decomposition temperature (IPDT) has been correlated the volatile parts of polymeric materials and used for estimating the inherent thermal stability of polymeric materials. The IPDT of pure epoxy was 464 °C and the IPDTs of hybrids were higher than that of pure epoxy. The thermal stability of hybrids increased with the contents of inorganic components. The inorganic components can improve the thermal stability of pure epoxy.Two methods have been used to study the degradation of hybrids containing silicon, phosphorous and nitrogen hybrid during thermal analysis. These investigated methods are Kissenger, Ozawa's methods. The activation energies (E_a) were obtained from these methods and compared. It is found that the values of E_a for modified epoxy hybrids are higher than that of pure epoxy. The hybrids of high activation energy possess high thermal stability.     

Thermoanalytical investigations of 4-methylpiperazine-1-carbodithioic acid ligand and its iron(III), cobalt(II), copper(II) and zinc(II) complexes

The thermal decomposition studies on 4-methylpiperazine-1-carbodithioic acid ligand (4-MPipzcdtH) and its complexes, viz. [M(4-MPipzcdtH)_n](ClO4)_n (M=Fe(III) when n=3; M=Co(II), Cu(II) when n=2) and [Zn(4-MPipzcdtH)₂]Cl₂ have been carried out using non-isothermal techniques (TG and DTA). Initial decomposition temperatures (IDT), indicate that thermal stability is influenced by the change of central metal ion. Free acid ligand exhibits single stage decomposition with a sharp DTA endotherm. Complexes, [M(4-MPipzcdtH)_n](ClO₄)_n undergo single stage decomposition with detonation and give rise to very sharp exothermic DTA curves while the complex [Zn(4-MPipzcdtH)₂]Cl₂ shows three-stage decomposition patterns. The kinetic and thermodynamic parameters, viz. the energy of activation E, the frequency factor A, entropy of activation S and specific rate constant k, etc. have been evaluated from TG data using Coats and Redfern equation. Based upon the results of the differential thermal analysis study, the [M(4-MPipzcdtH)_n](ClO₄)_n complexes have been found to possess characteristic of high energy materials.     

Synthesis and thermal analysis of tetraethylammonium bromochlorocobaltates(II) [Et4N]2[CoBrnCl4−n]

New mixed-ligand tetraethylammonium halogenocobaltates(II) of general formula [Et₄N]₂[CoBr_nCl_4−n] have been synthesized. Their thermal properties were characterized on the basis of the TG and DTG curves taken in argon and derivatograms recorded in static air. Some products of successive decomposition steps were identified based on their IR, FIR and VIS spectra as well as the results of elemental analysis. The influence of the nature of the complex anion and oven atmosphere on the progress of thermal decomposition of the compounds has been discussed.     

Thermogravimetric analysis of PVC/NR-b-PU blends

Thermal stability of solution-cast blends of poly(vinylchloride) and NR-b-PU block copolymers of three different chain extender diols was studied by thermogravimetry. Thermal degradation of individual components and their blends were investigated with special reference to blend ratio. As the block copolymer content in the blends increased their thermal stability was also found to increase. Enhanced thermal stability of PVC is believed due to the favorable interaction with PVC and the PU hard segments of the block copolymer. DTG curves were used for the determination of different stages involved in the degradation. Activation energy for degradation was determined from Coats–Redfern plot.     

Morphology of polystyrene-block-poly(styrene-co-acrylonitrile) and polystyrene-block-poly(styrene-co-acrylonitrile-co-5-vinyltetrazole) diblock copolymers prepared by nitroxide-mediated radical polymerization and “click” chemistry

Well-defined polystyrene-block-poly(styrene-co-acrylonitrile) PS-block-P(S-co-AN) and poly(styrene-co-acrylonitrile-co-5-vinyltetrazole) PS-block-P(S-co-AN-co-5VT) block copolymers with various content of acrylonitrile units in the statistical block were synthesized by nitroxide mediated radical polymerization (NMRP) and post-functionalized using efficient “click” chemistry process. In the second step, acrylonitrile units were successfully modified using 1,3-dipolar cycloaddition (“click” chemistry) type polymer analogue reaction. The original pristine diblock copolymers can be molecularly dissolved in THF and dioxane while the “tetrazolated” versions aggregate to clusters as determined by dynamic light scattering (DLS). Small-angle X-ray scattering (SAXS) and Transmission Electron Microscopy (TEM) revealed ordered lamellar morphology with interlamellar spacing d = 60 nm increasing to d = 80 nm for “tetrazolated” diblock copolymers. The morphological features of diblock copolymer thin layers observed by Atomic Force Microscopy (AFM) depend on the tunable content of both acrylonitrile and 5-vinyltetrazole units and on the quality (polarity) of the solvents used.     

Thermogravimetric and wide angle X-ray diffraction analysis of thermoplastic elastomers from nylon copolymer and EPDM rubber

Nylon copolymer (PA6, 66) and ethylene propylene diene (EPDM) blends with and without compatibilizer were prepared by melt mixing using Brabender Plasticorder. The thermal stability of nylon copolymer (PA6, 66)/ethylene propylene diene rubber (EPDM) blends was studied using thermogravimetric analysis (TGA). The morphology of the blends was investigated using scanning electron microscopy (SEM). In this work, the effects of blend ratio and compatibilisation on thermal stability and crystallinity were investigated. The incorporation of EPDM rubber was found to improve the thermal stability of nylon copolymer. The kinetic parameters of the degradation process were also studied. A good correlation was observed between the thermal properties and phase morphology of the blends. By applying Coats and Redfern method, the activation energies of various blends were derived from the Thermogravimetric curves. The compatibilization of the blends using EPM-g-MA has increased the degradation temperature and decreased the weight loss. EPM-g-MA is an effective compatibilizer as it increases the decomposition temperature and thermal stability of the blends. Crystallinity of various systems has been studied using wide angle X-ray scattering (WAXS). The addition of EPDM decreases the crystallinity of the blend systems.     

Crystallization and melting behaviors of polystyrene-b-poly(ethylene-co-butene) block copolymers

Non-isothermal and isothermal crystallization behaviors of polystyrene-b-poly(ethylene-co-butene) (PSt-b-PEB) block copolymers with different compositions and chain lengths were investigated by differential scanning calorimetry (DSC). The results show that crystallization of PEB block is strongly dependent on the composition. Crystallization temperature (T_c), melting temperature (T_m) and fusion enthalpy (ΔH_f) increase rapidly with PEB volume fraction (V_E) for block copolymers with V_E below 50%, but there is little change when PEB block becomes the major component. Glass transition temperature (T_g) of the PSt block and order-disorder transition temperature (T_ODT) of block copolymers also have a weak effect. The isothermal crystallization kinetics results show that Avrami exponent (n) was strongly dependent on the composition and crystallization temperature. For the block copolymers with V_E below 38.7 vol%, the values of n vary between 0.9 and 1.3, indicating that crystallization is confined. For the PSt-b-PEB block copolymers with V_E higher than 50%, fractionated crystallization behavior is usually observed. A two-step isothermal crystallization procedure is applied to these block copolymers. It is found that breakout crystallization occurs at higher T_c, but confined at lower T_c. Two overlapped melting peaks are observed for the block copolymers with fractionated crystallization behavior after two-step crystallization, and only the higher melting peak corresponding to breakout crystallization can be used to derive equilibrium melting temperature.     

Effect of iron-containing catalysts on thermal decomposition of cured GAP-AP propellants

The effects of various burning rate catalysts on thermal decomposition of cured glycidyl azide polymer (GAP)-ammonium perchlorate (AP) propellants have been studied by means of thermal analysis and a modified vacuum stability test (MVST). Four types of iron-containing catalysts examined in this paper are catocene, ferrocenecarboxaldehyde (FCA), ferrocene, and ferric oxide. Results of differential thermal analysis (DTA) and thermogravimetric analysis (TG) revealed that the catalysts play an important role in the decomposition of both AP and GAP. The peak decomposition temperature (T _m) of DTA curves and onset decomposition temperature (T _o) of TG patterns considerably shifted to a lower temperature as the concentration of catalysts increased in the propellants. The endothermic temperature of AP, however, is unaffected by the presence of burning rate catalysts in all cases. The activation energy of decomposition of the propellants in range of 80 to 120°C is determined, based on the MVST results.