Catalytic decomposition of CH4 over Ni-Al2O3-SiO2 catalysts: Influence of pretreatment conditions for the production of H2

This article reports the production of COx free hydrogen and carbon nanofibers by the catalytic decomposition of methane over Ni-Al2O3-SiO2 catalysts. The influence of reaction temperature, pretreatment temperature, and effect of reductive pretreatment on the decomposition of methane activity is investigated. The physico-chemical characteristics of fresh and deactivated samples were characterized using BET-SA, XRD, TPR, SEM/TEM, CHNS analyses and correlated with the methane decomposition results obtained. The Ni-Al-Si （4 ： 0.5 ： 1.5） catalyst reduced with hydrazine hydrate produced better H2 yields of ca. 1815 mol H2/mol Ni than the catalyst reduced with 5% H2/N2.     

Catalytic Combustion of Methane over MnOx／ZrO2-Al2O3 Catalysts

MnOx/Al2O3 and MnOx/ZrO2-Al2O3 catalysts were prepared by incipient wetness impregnation of Mn(CH3COO)2 on the corresponding supports, followed by the characterization using X-ray diffraction (XRD). temperature programmed reduction (TPR) and BET surface area techniques. The result shows the BET surface area of ZrO2-Al2O3 is lower than that of Al2O3 due to the loading of ZrO2.However tile resulted MnOx/ZrO2-Al2O3 catalyst exhibits higher activity for methane combustion than MnOx/Al2O3, because the addition of ZrO2 onto Al2O3 is beneficial for the dispersion of Mn species and the improvement of the lattice oxygen activity in MnOx. subsequently the activation of methane during combustion. The optimum loading of Zr in MnOx/ZrO2-Al2O3 is in the range of 5%-10% correlated with the calcination temperatures of catalyst supports.     

CH4—H2O—CO2转化制取合成甲醇原料气的研究

在变温床中考查了负载型镍催化剂用于ＣＨ４－Ｈ２Ｏ－ＣＯ２转化制取合成气的活性与稳定性，该过程所制得的合成气勿需分离即可直接用于合成甲醇。本文对催化剂活性下降的原因用比表面、孔结构、ＸＲＤ和ＸＰＳ对不同反应时间的催化剂进行了对比分析，发现镍催化剂活性降低的原因是催化剂表面镍的大量流失。     

CH4 reforming with CO2 for syngas production over La2O3 promoted Ni catalysts supported on mesoporous nanostructured γ-A12O3

Nanostructured -y-A12O3 with high surface area and mesoporous structure was synthesized by sol-gel method and employed as catalyst support for nickel catalysts in methane reforming with carbon dioxide. The prepared samples were characterized by XRD, N2 adsorption-desorption, TPR, TPO, TPH, NH3-TPD and SEM techniques. The BET analysis showed a high surface area of 204 m2.g-1 and a narrow pore-size distribution centered at a diameter of 5.5 nm for catalyst support. The BET results revealed that addition of lanthanum oxide to aluminum oxide decreased the specific surface area. In addition, TPR results showed that addition of lanthanum oxide increased the reducibility of nickel catalyst. The catalytic evaluation results showed an increase in methane conversion with increasing lanthanum oxide to 3 mol% and further increase in lanthanum content decreased the catalytic activity. TPO analysis revealed that the coke deposition decreased with increasing lanthanum oxide to 3 mol%. SEM and TPH analyses confirmed the formation of whisker type carbon over the spent catalysts. Addition of steam and Oxide to drv reformin feed increased the methane conversion and led to carbon free ooeration in combined orocesses.     

Tungsten Promoted Ni／Al2O3 Catalysts for Carbon Dioxide Reforming of Methane to Synthesis Gas

A series of tungsten promoted alumina supported nickel catalysts has been prepared for the carbon diox-ide reforming of methane to synthesis gas. The catalysts have been characterized by means of XRD, TEM,and Laser Raman spectroscopy. It is shown that the addition of tungsten to the nickel catalyst can stabilize the catalyst and increase the resistance to carbon deposition. Adding a suitable amount of tungsten can also increase the catalyst activity to be close to that of supported noble metal catalysts. The carburisation of the tungsten modified nickel catalyst decreases the catalyst activity at lower reaction temperatures (＜1123K),but has no effect on the catalyst performance at higher reaction temperatures. The alumina supported nickel catalyst modified by 0. 67% (mass fraction) WO3 has the equivalent equilibrium constant of the dry reforming reaction to that of alumina supported 5% (mass fraction) Ru at 873 K, and also has a lower activation energy for dry reforming than the latter.     

Catalytic Combustion of Methane over CO1-xMgxO/Al2O3/FeCrAl Monolithic Catalysts

A series of CoxMgxO/Al2O3/FeCrAl catalysts （x=0-1） were prepared. The structures of the catalysts were characterized using XRD, SEM, and TPR analyses. The catalytic activity of the catalysts for methane combustion was evaluated in a continuous flow microreactor. The results indicated that the active washcoats adhered well on the FeCrAl foils. The phases in the catalysts were Co--xMgxO solid solutions, α-Al2O3, and γ-Al2O3. The surface particle size of the catalysts varied with variations in the molar ratios of Co to Mg. The Co component of the Co1_xMgxO/Al2O3/FeCrAl catalysts played an important role in the catalytic activity for methane combustion. In the Co1-xMgxO/AluO3/FeCrAl series catalyst （x=0.2-0.8）, the catalytic activity in terms of x was in the order of 0.5〉0.2〉0.8 under the experimental conditions. The presence of Mg in these catalysts could promote the thermal stability to a large extent. There were strong interactions between the Co1-xMgxO oxides and the AluO3/FeCrAl supports.     

Effect of CeO2 and CaO Promoters on Ignition Performance for Partial Oxidation of Methane over Ni/MgO-Al2O3 Catalyst

The effect of CeO2 and CaO promoters on the ignition performance over Ni/MgO-Al2O3 catalyst for the partial oxidation of methane （POM） to synthesis gas was investigated. It was found that the POM reaction could not be ignited over lwt%Ni/MgO-Al2O3 catalyst without the promoters in the temperature range from 773 K to 1073 K. CeO2 and CaO promoters enhanced the ignition performance and the POM reactivity of lwt%Ni/MgO-Al2O3 catalyst remarkably. Moreover, the improving effect became greater with the increase of the promoter content under the investigated reactiorrconditions. The modification effects of CeO2 and CaO promoters were closely related to the concentration and reducibility of the surface and bulk oxygen species.     

Al2O3 Effect on the Catalytic Activity of Cu-ZnO-Al2O3-SiO2 Catalysts for Dimethyl Ether Synthesis from CO2 Hydrogenation

The effect of Al2O3 on the Cu-ZnO-Al2O3-SiO2 catalysts prepared by a pseudo sol-gel method has been investigated and these catalysts were characterized by XRD, H2-TPR, XPS, NH3-TPD and CO2- TPD techniques. As revealed by XRD and H2-TPR, the added alumina produces high dispersion of CuO and makes the reduction of CuO difficult. XPS analysis detects a remarkably high Al^3＋ enrichment at the surface of calcined samples, along with a decrease of Eb of Cu 2p3/2, which confirms the Cu-Al interaction. Another important role of Al203 would be to incorporate into the SiO2 structure to form the acid-base sites for ether formation. The reaction results shows that the addition of Al2O3 exhibits a promoting effect on the CO2 conversion only when its content is below 1.4%, and an optimal DME selectivity is obtained when 4.0%Al2O3 is added, indicating a better ＇synergistic effect＇ is present between the methanol forming component and the acidic component in bifunctional catalysts. Possible relationship between the catalytic activity and the Cu-Al interaction as well as the surface acidity is discussed.     

预还原催化剂LaNiO3, La4Ni3O10, La3Ni2O7和La2NiO4 催化分解CH4制碳纳米管 的研究

通过预还原的LaNiO3,La4Ni3O10,La3Ni2O7和La2NiO4催化分解CH4可以制备大量高度石墨化的碳纳米管。还原前后的催化剂的结构和组分通过X射线衍射(XRD)测定。所制得的碳纳米管由扫描电镜(TEM)、X射线光电子能谱(XPS)表征。碳纳米管在空气在的热氧化性由热重实验(TG)测定。实验结果表明不同催化剂前驱中的La/Ni比会影响碳纳米管的管径分布和石墨化程度。La/Ni比越小,碳纳米管的管径越大,石墨化程度越高。     

Direct Synthesis of Acetic Acid from CH4 and CO2 in the Presence of O2 over a V2O5-PdCl2／Al2O3 Catalyst

The possibility of synthesizing acetic acid from CH4 and CO2 in the presence of O2 over a V2O5-PdCl2/Al2O3 catalyst has been explored. The result shows that it is feasible in catalyzing a direct conversion of CH4, CO2 and O2 to acetic acid. It is concluded that both CO2 and O2 are involved in the formation of acetic acid.     

Effect of La2O3／γ—Al2O3 Catalyst on the Activation of CH4 and CO2 to C2 Hydrocarbons under Non—equilibrium Plasma

In the reaction of methane and carbon dioxide to C2 hydrocabons under non-equilibrium plasma, methane conversion was decreased,but selectivity of C2 hydroxarbons was increased when using La2O3/γ-Al2O3 as catalyst. So the yield of C2 hydrocarbons was higher than using plasma alone. The synergism of La2O3/γ-Al2O3 and plasma gave methane conversion of 24.9% and C2 yield of 18.1%. The distribution of C2 hydrocarbons changed when Pd-La2O3/γ-Al2O3 was used as catalyst,the major C2 product was ethylene.     

BaO对Pd/Al2O3上CH4催化燃烧性能的影响

以醋酸钯为前身盐, BaO-Al2O3复合氧化物为载体制备了系列负载型钯催化剂. BET和XRD表征结果表明,复合氧化物在制备过程中发生固相反应所生成的BaAl2O4 可以阻止γ-Al2O3向α相的转变,显著增强Al2O3的热稳定性.以甲烷燃烧为模型反应的评价结果表明, BaO的引入提高了催化剂上甲烷燃烧反应的活性和稳定性.     

Ni基催化剂上CH4、C2H6和C2H4的裂解积炭性能

采用脉冲微反技术研究了添加半导体氧化物对Ni基催化剂上CH4、C2H6和C2H4的裂解积炭反应特性的影响。结果表明,n型半导体CeO2的添加降低了CH4和C2H6的积炭活性,而p型半导体Co3O4的添加则加速CH4和C2H6的裂解积炭;而对于与CH4和C2H6活化机制不同的C2H4分子的活化,上述影响机制正好相反,n型半导体CeO2的添加促进C2H4的裂解积炭反应,而p型半导体Co3O4的添加则抑制C2H4的裂解积炭反应。XPS分析表明,活性金属Ni与半导体氧化物之间存在的金属 半导体相互作用是这种影响机制的主要因素。     

Influence of Pretreatment on the Interaction of Oxygen with Silver and the Catalytic Activity of Ag／SiO2 Catalysts for CO Selective Oxidation in H2

The interactions of oxygen with pre~reduced silver catalysts as well as their catalytic propertiesfor CO selective oxidation in H2 after oxygen pre-treatment are studied in this paper. It is found that the pretreatment exerts a strong influence on the activity and selectivity of the silver catalyst. A drop in activity and selectivity is observed after treating a pre-reduced catalyst with oxygen at low temperatures,whereas a converse result is obtained after an oxidizing treatment at high temperatures (T≥350℃). O2-TPD results show that surface oxygen species adsorbs on silver surface after the oxygen treatment at low temperatures. However, penetration of oxygen into the silver is enhanced by a high temperature treatment, meanwhile the surface oxygen species disappear. No other silver species except metallic silver are observed on all the catalysts by XRD, and the size of silver particle is not changed after the treatment with oxygen at low temperatures. The surface oxygen species formed by oxygen treatment can also be removed by hydrogen reduction. The strongly-adsorbed surface oxygen species prohibit the adsorption and diffusion of oxygen species in reaction gas on the surface of silver catalyst, causing the decrease in CO oxidation activity, in other words, it is important to obtain a clean silver surface for increasing the catalyst activity in CO removal from H2-rich feed gas. The differences in activity and selectivity due to the oxygen pretreatment at different temperatures axe discussed in terms of the changes in the surface/subsurface oxygen species of the silver particles.     

CH4 reforming with CO2 for syngas production over La2O3 promoted Ni catalysts supported on mesoporous nanostructured γ-Al2O3

Nanostructured γ-Al₂O₃ with high surface area and mesoporous structure was synthesized by sol-gel method and employed as catalyst support for nickel catalysts in methane reforming with carbon dioxide. The prepared samples were characterized by XRD, N₂ adsorption-desorption, TPR, TPO, TPH, NH₃-TPD and SEM techniques. The BET analysis showed a high surface area of 204 m²·g⁻¹ and a narrow pore-size distribution centered at a diameter of 5.5 nm for catalyst support. The BET results revealed that addition of lanthanum oxide to aluminum oxide decreased the specific surface area. In addition, TPR results showed that addition of lanthanum oxide increased the reducibility of nickel catalyst. The catalytic evaluation results showed an increase in methane conversion with increasing lanthanum oxide to 3 mol% and further increase in lanthanum content decreased the catalytic activity. TPO analysis revealed that the coke deposition decreased with increasing lanthanum oxide to 3 mol%. SEM and TPH analyses confirmed the formation of whisker type carbon over the spent catalysts. Addition of steam and O₂ to dry reforming feed increased the methane conversion and led to carbon free operation in combined processes.     

Ce0.67Zr0.33O2对CH4燃烧催化剂Fe2O3/Al2O3的改性作用

固定n（Ce）／n（Zr）比为0．67／0．33,用共沉淀法制得一系列CeO2-ZrO2-Al2O3固溶体,采用这些固溶体作载体,以Fe2O3为活性组分,用浸渍法制备了一系列催化剂,BET结果显示,将适量Ce0.67Zr0．33O2引入到Al2O3载体中有助于催化剂保持较高的比表面积,TPR结果显示,载体中引入适量的Ce0．67Zr0.33O2可以改善催化剂的氧化还原性能,XRD结果表明,Fe2O3在CeO2-ZrO2-Al2O3载体上呈现出良好的分散状况,老化前后催化剂的晶相结构基本无明显变化,特别是当载体中m（Ce0.67Zr0.33O2）：m（Al2O3）的值为1：2时,Fe2O3／CeO2-ZrO2-Al2O3催化剂在甲烷催化燃烧中显示出最佳的催化性能和抗高温老化性能。     

Pd/Hβ-zeolite catalysts for catalytic combustion of toluene: Effect of SiO2/Al2O3 ratio

The effect of pure and high silica Hβ zeolites on the catalytic performance of toluene combustion over Pd/H/3 catalyst was evaluated.Pure and high silica β zeolites were prepared by direct synthesis procedures,then 0.1 wt% of palladium was impregnated on different Hβ zeolites via incipient wetness technique using palladium nitrate as the Pd source.The Pd/Hβ catalysts were characterized by XRD,N2 adsorption/desorption,H2O adsorption,NH3-TPD,H2-TPR and XPS techniques.With increasing the SIO2/Al2O3 ratio of β zeolite,the activity of the Pd/Hβ catalysts for toluene combustion increased clearly and the pure silica β zeolite supported Pd catalyst showed the best catalytic activity.The superior catalytic performance of Pd/β catalyst prepared from pure silica β zeolite was attributed to its high hydrophobicity and the preserving ability for PdO active species.     

Impact of Water Molecules on the Isomerization of CH3S（OH）CH2 to CH3S（O）CH3： A Computational Investigation

The isomerization of CH3S（OH）CH2 to CH3S（O）CH3 in the absence and presence of water has been investigated at the G3XMP2//B3LYP/6-311 ＋ G（2df, p） level. The naked isomerization, the reaction without water, gives the high barrier height （21.56 kcal.mol^-1）. Three models are constructed to describe the water influence on the isomerization, that is, water molecules are the catalyst and the microsolvation, and water molecules act as the catalyst and microsolvation simultaneously. Our results show that the isomerization barrier heights of CH3S（OH）CH2 to CH3S（O）CH3 are reduced by 12.32, 11.04, and 7.80 kcal.mol^-1, respectively, when one, two, and three water molecules are performed as catalyst, in contrast to the naked isomerization. Moreover, the rate constants of the isomerization are calculated using the transition state theory with the Wigner tunneling correction over the temperature range of 240-425 K. We find that the rate constant of a single water molecule as the catalyst is 1.58 times larger than the naked isomerization at 325 K, whereas it is slower by 6 orders of magnitude when water molecule serves as the microsolvation at 325 K, compared to naked reaction. So the water-catalyzed isomerization of CH3S（OH）CH2 to CH3S（O）CH3 is predicted to be the key role in lowering the activation energy. The isomerization involving water molecules acting as mierosolvation is unfavorable under atmospheric conditions.     

WO3/Salan/30 % H2O2： a Heterogeneous Catalytic System for the Asymmetric Oxidation of Sulfides

Enantiopure sulfoxides constitute a class of the most efficient and versatile chiral controllers and useful synthons in asymmetric synthesis, and they are of great interest in the pharmaceutical industry as biologically significant compounds1. The synthesis of chiral nonracemic sulfoxides with high enantiomeric purity has been a subject of constant interest over the past two decades. The asymmetric oxidation of prochiral sulfides mediated by chiral catalysis has become one of the most efficien…     

Ni-La/CexZr1-xO2对甲烷部分氧化/CH4-CO2重整耦合制合成气的催化剂制备及反应性能

通过共沉淀法制备铈锆固溶体作为载体,采用等体积、分步浸渍的方法制备了一系列10% Ni-3% La/CexZr1-xO2（X=0、0.16、0.5、0.75、1）催化剂,并将其应用到甲烷部分氧化和甲烷二氧化碳重整耦合制合成气的反应中。对不同Ce/Zr比的催化剂性能展开研究,采用XRD、H2-TPR、SEM手段对载体及催化剂进行了表征。结果表明,铈锆固溶体的形成不仅提高了催化剂表面活性组分的分散度,使催化剂表面NiO晶粒尺寸从26.5 nm减到13.7 nm;而且能够加强活性组分与载体之间的相互作用,提高催化剂的热稳定性能;随着Ce/Zr比的增加,催化剂的转化率、选择性及稳定性随之增强,其关系为：Ni-La/Ce0.75Zr0.25O2 > Ni-La/Ce0.5Zr0.5O2 > Ni-La/Ce0.16Zr0.84O2。